Posidrive Sprockets - Small Parts And Bearings Categories


Sprockets Posi-Drive

Hide Pictures

Go to Top  


Sprockets - Posi-Drive - 3.75 mm Circular Pitch

Sprockets - Posi-Drive - 3.75 mm Circular Pitch

Same as US 0.1475 Pitch - Use with Double Core Belts.

Use with Double Core Posi-Drive Belts. 3.746mm Circular Pitch. Same as US 0.1475 Pitch.

Click for combined categories: All Sprockets for Posi-Drive


Sprockets - Posi-Drive - 4.00 mm Circular Pitch

Sprockets - Posi-Drive - 4.00 mm Circular Pitch

Same as US 20 Pitch - Use with Double Core Belts.

Use with Double Core Posi-Drive Belts. 3.990mm Circular Pitch. Same as US 20 Pitch.

Click for combined categories: All Sprockets for Posi-Drive


Belts Posi-Drive

Hide Pictures

Go to Top  


Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core

Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core

Same as US 0.1475 Pitch - Use with Posi-Drive Sprockets.

Use Double Core with Posi-Drive Sprockets. 3.746mm Circular Pitch. Same as US 0.1475 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Click for combined categories: All Posi-Drive Belts


Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core

Belts - Posi-Drive - 4.00 mm Circular Pitch - Double Core

Same as US 20 Pitch - Use with Posi-Drive Sprockets.

Use Double Core with Posi-Drive Sprockets. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Click for combined categories: All Posi-Drive Belts


Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Belts - Posi-Drive - 4.00 mm Circular Pitch - Single Core

Same as US 20 Pitch - Use with Posi-Drive Pulleys.

Use Single Core with Posi-Drive Pulleys. 3.990mm Circular Pitch. Same as US 20 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Click for combined categories: All Posi-Drive Belts


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Sprockets - Idler

Sprockets - Idler

Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Roller Chain (See types under R)

Idler Shafts


Chain and Sprockets Ladder

Hide Pictures

Go to Top  


Sprockets - Ladder Chain - 3.750mm Pitch

Sprockets - Ladder Chain - 3.750mm Pitch

With and without Hubs. Brass


Click for combined categories: All Sprockets for Ladder Chain


Sprockets - Ladder Chain - 4.800mm Pitch

Sprockets - Ladder Chain - 4.800mm Pitch

Brass.


Click for combined categories: All Sprockets for Ladder Chain


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Sprockets - 12.7 x 3.3mm - Simplex  Plastic

Sprockets - 12.7 x 3.3mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 12.70x3.3mm steel chain (081-1 Narrow).

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Simplex Chain to Suit Listed Here


Sprockets - 12.7 x 4.9mm - Simplex  Plastic

Sprockets - 12.7 x 4.9mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 12.70x4.9mm steel chain (083-1 Narrow).

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Simplex Chain to Suit Listed Here


Sprockets - 12.7 x 7.75mm - Duplex  Metal

Sprockets - 12.7 x 7.75mm - Duplex Metal

Match with 12.70x7.75mm duplex chain (08B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 12.7 x 7.75mm - Simplex  Metal

Sprockets - 12.7 x 7.75mm - Simplex Metal

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 15.88 x 9.65mm - Duplex  Metal

Sprockets - 15.88 x 9.65mm - Duplex Metal

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 15.88 x 9.65mm - Simplex - Metal

Sprockets - 15.88 x 9.65mm - Simplex - Metal

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 19.05 x 11.68mm - Duplex  Metal

Sprockets - 19.05 x 11.68mm - Duplex Metal

Match with 19.05x11.68mm duplex steel chain (12B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 25.40 x 17.02mm - Duplex  Metal

Sprockets - 25.40 x 17.02mm - Duplex Metal

Match with 25.40x17.02mm duplex steel chain (16B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 16B - 1 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets -  6.35 x 2.8mm - Simplex  Metal

Sprockets - 6.35 x 2.8mm - Simplex Metal

25-1 ASA 1/4 Inch

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets -  9.53 x 4.7mm - Simplex  Metal

Sprockets - 9.53 x 4.7mm - Simplex Metal

Match with 9.53x4.7mm steel chain (35-1 ASA)

Finish bored and keyed sprockets with black oxide finish. Hub diameters vary to suit bore. American Standard 35-1 - 3/8 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Simplex Chain to Suit Listed Here


Sprockets -  9.53 x 5.7mm - Duplex  Metal

Sprockets - 9.53 x 5.7mm - Duplex Metal

Match with 9.53x5.7mm duplex steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch Duplex. With and without hubs.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets -  9.53 x 5.7mm - Simplex  Metal

Sprockets - 9.53 x 5.7mm - Simplex Metal

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 12.7 x 7.75mm - Simplex  Plastic

Sprockets - 12.7 x 7.75mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 12.70x7.75mm steel chain (08B-1 BS). British Standard 08B - 1/2 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 12.7 x 7.85mm - Simplex  Plastic

Sprockets - 12.7 x 7.85mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 12.70x7.85mm plastic or steel chain (40-1 ASA).

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 19.05 x 11.68mm - Simplex  Metal

Sprockets - 19.05 x 11.68mm - Simplex Metal

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 19.05 x 11.68mm - Triplex  Metal

Sprockets - 19.05 x 11.68mm - Triplex Metal

Match with 19.05x11.68mm triplex steel chain (12B-3 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Triplex Chain to Suit Listed Here


Sprockets - 25.40 x 17.02mm - Simplex  Metal

Sprockets - 25.40 x 17.02mm - Simplex Metal

Match with 25.40x17.02mm simplex steel chain (16B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 16B - 1 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets -  3.12 x 1.47mm - Simplex  Plastic

Sprockets - 3.12 x 1.47mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 3.12mm miniature plastic chain.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website


Sprockets -  3.75 x 1.6mm - Simplex  Plastic

Sprockets - 3.75 x 1.6mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 3.75mm miniature plastic or stainless chain.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website


Sprockets -  3.75 x 1.6mm - Simplex  Stainless

Sprockets - 3.75 x 1.6mm - Simplex Stainless

Miniature 3.75mm Pitch.

Match with 3.75mm simplex chain. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

For simple ready selected sets of chain and sprockets please see the HES website


Sprockets -  6.00 x 2.6mm - Simplex  Plastic

Sprockets - 6.00 x 2.6mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 6.00mm steel chain.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Simplex Chain to Suit Listed Here


Sprockets -  6.35 x 2.8mm - Simplex  Plastic

Sprockets - 6.35 x 2.8mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 6.35mm plastic or steel chain (25-1 ASA). American Standard 25-1 - 1/4 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Simplex Chain to Suit Listed Here


Sprockets -  6.35 x 2.8mm - Simplex  Stainless

Sprockets - 6.35 x 2.8mm - Simplex Stainless

With and without Hubs. 25-1 ASA 1/4 Inch

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets -  8.00 x 2.8mm - Simplex  Plastic

Sprockets - 8.00 x 2.8mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 8.00mm steel chain.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Simplex Chain to Suit Listed Here


Sprockets -  9.53 x 4.7mm - Simplex  Plastic

Sprockets - 9.53 x 4.7mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 9.53x4.7mm plastic or steel chain (35-1 ASA). American Standard 35-1 - 3/8 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Simplex Chain to Suit Listed Here


Sprockets -  9.53 x 5.7mm - Simplex  Plastic

Sprockets - 9.53 x 5.7mm - Simplex Plastic

Nylon - Acetal - With and without bore inserts.

Match with series 9.53x5.7mm steel chain (06B BS). British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Chain and Sprockets Ladder

Hide Pictures

Go to Top  


Sprockets - Ladder Chain - 4.242mm Pitch - Size 21

Sprockets - Ladder Chain - 4.242mm Pitch - Size 21

Plastic.


Click for combined categories: All Sprockets for Ladder Chain


Sprockets - Ladder Chain - 4.699mm Pitch - Size 19

Sprockets - Ladder Chain - 4.699mm Pitch - Size 19

Plastic, brass and steel.


Click for combined categories: All Sprockets for Ladder Chain


Sprockets - Ladder Chain - 7.264mm Pitch - Size 18

Sprockets - Ladder Chain - 7.264mm Pitch - Size 18

Plastic, bronze and steel.


Click for combined categories: All Sprockets for Ladder Chain


Sprockets - Ladder Chain - 8.966mm Pitch - Size 17

Sprockets - Ladder Chain - 8.966mm Pitch - Size 17

Plastic, brass and steel.


Click for combined categories: All Sprockets for Ladder Chain


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Sprockets - 12.7 x 7.75mm - Simplex - Plates - Metal

Sprockets - 12.7 x 7.75mm - Simplex - Plates - Metal

Match with 12.70x7.75mm simplex chain (08B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets -  6.35 x 2.8mm - Simplex - Plates - Metal

Sprockets - 6.35 x 2.8mm - Simplex - Plates - Metal

25-1 ASA 1/4 Inch

Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets -  9.53 x 5.7mm - Simplex - Plates - Metal

Sprockets - 9.53 x 5.7mm - Simplex - Plates - Metal

Match with 9.53x5.7mm steel chain (06B BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 12.7 x 7.75mm - Duplex  Metal - Taperlock

Sprockets - 12.7 x 7.75mm - Duplex Metal - Taperlock

Match with 12.70x7.75mm duplex chain (08B-2 BS)

Taperlock bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 12.7 x 7.75mm - Simplex  Metal - Taperlock

Sprockets - 12.7 x 7.75mm - Simplex Metal - Taperlock

Match with 12.70x7.75mm simplex chain (08B BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 15.88 x 9.65mm - Duplex  Metal - Taperlock

Sprockets - 15.88 x 9.65mm - Duplex Metal - Taperlock

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 10B - 5/8 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 15.88 x 9.65mm - Simplex  Metal - Taperlock

Sprockets - 15.88 x 9.65mm - Simplex Metal - Taperlock

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 15.88 x 9.65mm - Simplex - Plates - Metal

Sprockets - 15.88 x 9.65mm - Simplex - Plates - Metal

Match with 15.90x9.65mm duplex steel chain (10B-2 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 19.05 x 11.68mm - Duplex  Metal - Taperlock

Sprockets - 19.05 x 11.68mm - Duplex Metal - Taperlock

Match with 19.05x11.68mm duplex steel chain (12B-2 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 12B - 3/4 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 19.05 x 11.68mm - Simplex - Plates - Metal

Sprockets - 19.05 x 11.68mm - Simplex - Plates - Metal

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 25.40 x 17.02mm - Duplex  Metal - Taperlock

Sprockets - 25.40 x 17.02mm - Duplex Metal - Taperlock

Match with 25.40x17.02mm duplex steel chain (16B-2 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 16B - 1 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets - 25.40 x 17.02mm - Simplex - Plates - Metal

Sprockets - 25.40 x 17.02mm - Simplex - Plates - Metal

Match with 25.40x17.02mm simplex steel chain (16B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 16B - 1 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets -  9.53 x 5.7mm - Duplex  Metal - Taperlock

Sprockets - 9.53 x 5.7mm - Duplex Metal - Taperlock

Match with 9.53x5.7mm duplex steel chain (06B BS)

Taperlock bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 06B - 3/8 inch Duplex.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Duplex Chain to Suit Listed Here


Sprockets -  9.53 x 5.7mm - Simplex  Metal - Taperlock

Sprockets - 9.53 x 5.7mm - Simplex Metal - Taperlock

Match with 9.53x5.7mm steel chain (06B BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 19.05 x 11.68mm - Simplex  Metal - Taperlock

Sprockets - 19.05 x 11.68mm - Simplex Metal - Taperlock

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Sprockets - 19.05 x 11.68mm - Triplex  Metal - Taperlock

Sprockets - 19.05 x 11.68mm - Triplex Metal - Taperlock

Match with 19.05x11.68mm triplex steel chain (12B-3 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 12B - 3/4 inch.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website

Steel Triplex Chain to Suit Listed Here


Sprockets - 25.40 x 17.02mm - Simplex  Metal - Taperlock

Sprockets - 25.40 x 17.02mm - Simplex Metal - Taperlock

Match with 25.40x17.02mm simplex steel chain (16B-1 BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 16B - 1 inch. For easy ready selected sets of chain and sprockets please see the HES website.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Stainless Chain To Suit Listed Here

Steel Simplex Chain to Suit Listed Here


Pulleys Posi-Drive

Hide Pictures

Go to Top  


Pulleys - Posi-Drive - 2.50 mm Circular Pitch

Pulleys - Posi-Drive - 2.50 mm Circular Pitch

Same as US 32 Pitch - Use with Single Core Belts.

Use with Single Core Posi-Drive Belts. 2.494mm Circular Pitch. Same as US 32 Pitch.

Click for combined categories: All Posi Drive Pulleys

Related Information:
Bore Reducers


Pulleys - Posi-Drive - 4.00 mm Circular Pitch

Pulleys - Posi-Drive - 4.00 mm Circular Pitch

Same as US 20 Pitch - Use with Single Core Belts.

Use with Single Core Posi-Drive Belts. 3.990mm Circular Pitch. Same as US 20 Pitch.

Click for combined categories: All Posi Drive Pulleys

Related Information:
Bore Reducers


Tensioners

Hide Pictures

Go to Top  


Tensioner - Reversible Drive

Tensioner - Reversible Drive

Use with idler shafts and idler pulleys. Has the ability for continued tension on reversible drives by using a floating arm that automatically relocates when the drive direction reverses.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Thread Inserts

Hide Pictures

Go to Top  


Tools - Thread Insert - Power Drive - EZ-Lok

Tools - Thread Insert - Power Drive - EZ-Lok

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

Click for combined categories: All Tools


Rivets

Hide Pictures

Go to Top  


Rivets - Drive

Rivets - Drive


Rollers

Hide Pictures

Go to Top  


Rollers - Drive

Rollers - Drive


Click for combined categories: All Rollers


Screws Pan Head

Hide Pictures

Go to Top  


Screws - Pan Head - Steel - Pozidrive

Screws - Pan Head - Steel - Pozidrive

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Wheels Industrial

Hide Pictures

Go to Top  


Wheels - Drive - Friction

Wheels - Drive - Friction

O-Ring tyre - Acetal body - Brass bore insert.

Brass Bore Insert. Acetal Body. Set Screw Locking. Buna N O-Ring Tyre - 70 Durometer. Bore tolerance +0.025/-0.000.

Screws Countersunk

Hide Pictures

Go to Top  


Screws - Countersunk - Steel - Pozidrive

Screws - Countersunk - Steel - Pozidrive

Flat Head Countersunk UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws Pan Head

Hide Pictures

Go to Top  


Screws - Pan Head - 303/304 Stainless - Pozidrive

Screws - Pan Head - 303/304 Stainless - Pozidrive

Metric Only

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws - Pan Head - 316 Stainless - Pozidrive

Screws - Pan Head - 316 Stainless - Pozidrive

Metric Only

Nuts sold seperately - See Nuts.

Click for combined categories: All Machine Screws


Screws Countersunk

Hide Pictures

Go to Top  


Screws - Countersunk - Stainless - Pozidrive

Screws - Countersunk - Stainless - Pozidrive

Flat Head Countersunk. Metric small selection only.

Nuts sold seperately - See Nuts.

Click for combined categories: All Countersunk Screws


Pins - Dowel

Hide Pictures

Go to Top  


Pins - Hammer Drive - Flat Head

Pins - Hammer Drive - Flat Head

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Click for combined categories: All Hammer Drive Pins


Pins - Hammer Drive - Round Head

Pins - Hammer Drive - Round Head

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Click for combined categories: All Hammer Drive Pins


Tensioners

Hide Pictures

Go to Top  


Tensioner - Drive - Adjustable Flanged

Tensioner - Drive - Adjustable Flanged

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Click for combined categories: All Tensioner Arms


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Self Tapping - For Wood - Hex Drive

Inserts - Self Tapping - For Wood - Hex Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Tensioners

Hide Pictures

Go to Top  


Tensioner - Drive - Double Adjust - Base Mount

Tensioner - Drive - Double Adjust - Base Mount

Use with idler shafts and idler pulleys. Adjusting slot assists with precise adjustments.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Click for combined categories: All Tensioner Arms


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Hex Drive Handle - Locking - Steel

Plungers - Spring - Hex Drive Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive

Inserts - Self Tapping - For Wood - Slotted Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive - Short

Inserts - Self Tapping - For Wood - Slotted Drive - Short

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Tensioners

Hide Pictures

Go to Top  


Tensioner - Drive - Single Adjusting - Shaft Mount

Tensioner - Drive - Single Adjusting - Shaft Mount

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Linear Slides

Hide Pictures

Go to Top  


Posi Drive Stage - Ball Slide

Posi Drive Stage - Ball Slide

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

Click for combined categories: All Posi-Drive Stages


Posi Drive Stage - Crossed Roller

Posi Drive Stage - Crossed Roller

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

Click for combined categories: All Posi-Drive Stages


Chain and Sprockets Ladder

Hide Pictures

Go to Top  


Chain - Ladder - 6.350mm Pitch

Chain - Ladder - 6.350mm Pitch

Steel - Brass - Stainless - High Tensile. Use with standard 6.35mm (1/4) pitch roller chain sprockets

Use with standard 6.35mm (1/4) pitch roller chain sprockets.

Click for combined categories: All Ladder Chain

Related Information:
Plastic Sprockets to Suit 6.35 Pitch Ladder Chain

Stainless Sprockets to Suit 6.35 Pitch Ladder Chain


Chain - Ladder - 9.525mm Pitch

Chain - Ladder - 9.525mm Pitch

Steel - Brass - Stainless - High Tensile. Use with Standard 9.525mm (3/8) pitch roller chain sprockets.

Use with Standard 9.525mm (3/8) pitch roller chain sprockets.

Click for combined categories: All Ladder Chain

Related Information:
Plastic Sprockets to Suit 9.525 Pitch Ladder Chain


Chain - Ladder - 3.750mm Pitch

Chain - Ladder - 3.750mm Pitch

Steel - Brass - Stainless - High Tensile.


Click for combined categories: All Ladder Chain


Chain - Ladder - 4.800mm Pitch

Chain - Ladder - 4.800mm Pitch

Steel - Brass - Stainless - High Tensile.


Click for combined categories: All Ladder Chain


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Chain - Roller - Metal - Duplex

Chain - Roller - Metal - Duplex

High tensile steel.


Click for combined categories: All Roller Chain


Chain - Roller - Metal - Simplex

Chain - Roller - Metal - Simplex

Includes Miniature Sizes.


Click for combined categories: All Roller Chain

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website


Chain - Roller - Metal - Triplex

Chain - Roller - Metal - Triplex

High tensile steel.


Click for combined categories: All Roller Chain


Chain - Roller - Plastic - Simplex

Chain - Roller - Plastic - Simplex

Includes acetal, polyproylene and nylon. Miniature size from 3.1mm up to 12.7mm

Snap together construction - no joining links required.

Click for combined categories: All Roller Chain


Chain - Roller - Metal - Duplex - Links

Chain - Roller - Metal - Duplex - Links

High tensile steel.


Click for combined categories: All Roller Chain Links


Chain and Sprockets Ladder

Hide Pictures

Go to Top  


Chain - Ladder - 4.699mm Pitch - Size 19

Chain - Ladder - 4.699mm Pitch - Size 19

Steel - Brass - Stainless - High Tensile.


Click for combined categories: All Ladder Chain


Chain - Ladder - 8.966mm Pitch - Size 17

Chain - Ladder - 8.966mm Pitch - Size 17

Steel - Brass - Stainless - High Tensile.


Click for combined categories: All Ladder Chain


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Chain - Roller - Metal - Simplex - Links

Chain - Roller - Metal - Simplex - Links

Includes Miniature Sizes.


Click for combined categories: All Roller Chain Links

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website


Chain - Roller - Metal - Triplex - Links

Chain - Roller - Metal - Triplex - Links

High tensile steel.


Click for combined categories: All Roller Chain Links


Chain - Roller - Metal - Simplex - Stainless Steel

Chain - Roller - Metal - Simplex - Stainless Steel

Includes Miniature Sizes from 3.747mm pitch.


Click for combined categories: All Roller Chain


Chain - Roller - Metal - Simplex - Links - Stainless Steel

Chain - Roller - Metal - Simplex - Links - Stainless Steel

Includes Miniature Sizes.


Click for combined categories: All Roller Chain Links

Related Information:
For simple ready selected sets of chain and sprockets please see the HES website


Locking Compounds

Hide Pictures

Go to Top  


Retaining Compounds

Retaining Compounds

Molytec and Loctite. Includes Quickmetal. High and medium retaining for bearings, bushes, gears, pulleys and sprockets.


Click for combined categories: All Adhesives


Locking Assemblies

Hide Pictures

Go to Top  


Assemblies - Locking - Flanged

Assemblies - Locking - Flanged

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

Click for combined categories: All Locking Assemblies


Assemblies - Locking - Unflanged

Assemblies - Locking - Unflanged

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

Click for combined categories: All Locking Assemblies


Tools Pullers

Hide Pictures

Go to Top  


Tools - Pullers - Small

Tools - Pullers - Small

Small pullers for miniature bearings, gears, pulleys, sprockets and other pressed on parts.

Click for combined categories: All Tools


Gear Blanks

Hide Pictures

Go to Top  


Gears - Blanks

Gears - Blanks

Blanks for cutting gears and pulleys and friction drives.


Gearboxes Right Angle

Hide Pictures

Go to Top  


Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

1 to 1 ratio with rated speeds up to 1800rpm. Sealed gearcase. Key drive shafts. Keys included.

4140 Heat Treated steel gears and shafts. Aluminium alloy hard anodised case. Maximum operating temperature 90 Deg C (200 Deg F). Optional foot mount plates available - also listed in this category.

Click for combined categories: All Right Angle Gearboxes



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.