Quick Delivery Items: Plugs - Small Parts And Bearings Categories


Plugs

Hide Pictures

Go to Top  


Plugs - Pressure

Plugs - Pressure


Sealing Plugs

Hide Pictures

Go to Top  


Sealing Plugs - Stainless

Sealing Plugs - Stainless

The sealing plug is a safe, quick, leakproof and low cost method for sealing cross-drilled holes. It ensures peak performance with a comfortable safety margin even in extreme applications.

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.

Tools - Sealing Plug Installation

Tools - Sealing Plug Installation

Hand installation tools for sealing plugs

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.

Click for combined categories: All Tools


Rope and Cable

Hide Pictures

Go to Top  


Attachments - Plugs - Synchromesh

Attachments - Plugs - Synchromesh

Recommended dimensions after crimping:. 1.05 Cable - A=2.81 B=6.98. 2.06 Cable - A=2.95 B=6.94. 2.60 and 3.40 Cable - A=3.05 B=6.86.

Click for combined categories: All Synchromesh Attachments


Wear Strips

Hide Pictures

Go to Top  


Wearstrips - Graphite Plug

Wearstrips - Graphite Plug

Self-Lube wearstrips provide effective and economical means of controlling and guiding linear motions, especially in large load applications.

Made of solid aluminum bronze with self-lubricating graphite plugs. Furnished semi-finished and are able to be cut to size and finished. Plugs are 25.4mm centres. Drill mounting holes either between or through graphite plugs. Before drilling break out graphite.

Click for combined categories: All Wear Strips


Rope and Cable

Hide Pictures

Go to Top  


Attachments - Ball Plugs

Attachments - Ball Plugs

F and L dimensions are obtained after swaging. Before swaging the fitting is round.

Click for combined categories: All Cable Attachments


Attachments - Threaded Plugs

Attachments - Threaded Plugs

F and L dimensions are obtained after swaging. Before swaging the fitting is round.

Click for combined categories: All Cable Attachments


Bushes Bronze

Hide Pictures

Go to Top  


Bushes - Aluminium Bronze - Graphite Plug - Flanged

Bushes - Aluminium Bronze - Graphite Plug - Flanged

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Click for combined categories: All Bronze Bushes

Click for combined categories: All Flanged Bronze Bushes


Bushes - Aluminium Bronze - Graphite Plug - Unflanged

Bushes - Aluminium Bronze - Graphite Plug - Unflanged

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Click for combined categories: All Bronze Bushes

Click for combined categories: All Unflanged Bronze Bushes


Power Adaptors

Hide Pictures

Go to Top  


Adaptors - Power - AC to AC - Multi Plug

Adaptors - Power - AC to AC - Multi Plug

SAA Approved Australian Adaptors for AC to AC. Supplied with assorted plugs.


Click for combined categories: All Power Adaptors


Adaptors - Power - AC to DC - Multi Plug

Adaptors - Power - AC to DC - Multi Plug

SAA Approved Australian Adaptors for AC to DC. Supplied with assorted plugs.


Click for combined categories: All Power Adaptors


Latches

Hide Pictures

Go to Top  


Latching Handles - Outside Door - Heavy Duty

Latching Handles - Outside Door - Heavy Duty

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.

Latches - Cabinet - Low Profile

Latches - Cabinet - Low Profile

Designed mainly for use on light cabinet doors and panels. A distinctive snap lets user know the latch is fully open or closed. Plug barrel and hex nuts are zinc diecast.

Cam, lock washer and screw are made from steel with a nickel plated finish. Hex type accepts 6.35mm (1/4 inch) hex tool. For use on panels up to 6.35mm (1/4 in.) thick. Straight cams.

Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square

Housings - Linear - Square

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Click for combined categories: All Linear Bearing Housings


Solar Parts

Hide Pictures

Go to Top  


Solar Cells

Solar Cells

Uses include solar toys, solar challenge models, science kits, solar education kits etc

Most sizes in the EPSS and EPAS range can be ordered with Solder Pads, Screws, Alligator Clips, Banana Plugs or Connecting Wires attached.

Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Square - Insert Type

Suspension Units - Rubber - Square - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Latches

Hide Pictures

Go to Top  


Latches - Paddle

Latches - Paddle

Push to close latch accommodates left or right side latching. Corrosion resistant polycarbonate / ABS black resin housing and paddle. Paddle serves as door handle.

Quick easly installation into 36.8mm x 84.6mm rectangular hole. Lock plug is glass reinforced acetal with brass wafers. Other parts are glass reinforced nylon. Key lockable with locked/unlocked indicator. Keys are brass. Two 4.2x1.4mm self tapping screws supplied. Total grip left or right is 6.35mm. Max working load 50kg.

Leads and Connectors

Hide Pictures

Go to Top  


Leads - Hobby

Leads - Hobby

Adaptor leads for batteries, battery chargers, servos and receivers including Tamiya, Deans and Losi plugs.

Includes Deans and T Connectors.


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155215 products in 3613 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.