Categories for: plate mounts
Vibration dampening
Refer pdf file at ftp://ftp.minibearings.com.au/mounts/MPS_Platemounts_Loads.pdf.
Excellent in controlling vibrations of 600cpm or more. Vibration dampening
Used for oscillating motion. Mild steel painted plates. Natural rubber isolators.
Temp Range: -70 to 175 Deg C (-94 to 347 Deg F). Vibration dampening
Lateral to vertical stiffness approx. 1:1 / Must be loaded vertically through its axis. Elastic limit corresponds to a maximum load in compression of 1.2 g (0.042oz) and radially 0.2 g (0.007oz). Damping factor c/co 0.15 to 0.20. Base Plate: Mild Steel / Springs: High Tensile Steel - Phosphated and dyed black. Isolator: Knitted stainless steel mesh / End Caps: Light Alloy.
Higher stiffness horizontally than cylindrical rubber mounts.
Easy to install. Base plate type (Type 2) - A rubber pad is fitted to the base plate. Mounting Plates : Mild Steel - Painted. Isolators : Natural Rubber.
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Fastener may be steel, brass or zinc plated. Natural Rubber isolator.
Vibration dampening
Fastener may be steel, brass or zinc plated. Natural rubber isolator.
Mounts - Uniload - CNF - Heavy Duty
Constant Natural Frequency Mounts - Stiffness is proportional to load.
Colour: Black. Carbon Steel Zinc Plated Screw. Corrosion resistant. Request a Uniload Catalogue by e-mail from our Contacts page.
Mounts - Uniload - CNF - Medium Duty
Constant Natural Frequency Mounts.
Carbon Steel Zinc Plated Screw. Corrosion resistant. Request a Uniload Catalogue by e-mail from our Contacts page.
Mounts - Centre Bolt - Solo Unitised
Vibration dampening
Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.
Mounts - Centre Bolt - Tandem Unitised
Vibration dampening
Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.
Mounts - Cylindrical - Female to Blank
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Mounts - Cylindrical - Female to Female
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Mounts - Cylindrical - Male to Blank
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Mounts - Cylindrical - Male to Blank - Conical
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Mounts - Cylindrical - Male to Female
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Mounts - Cylindrical - Male to Male
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Mounts - Leveling Carry - Ball Type
Vibration Dampening with retractable ball for movement.
Carry mount is a moveable mount in which the rubber mount is incorporated with a rotating ball. Allows movement of machines and provides vibration dampening. Simply turn the adjusting hole with a screwdriver to lift or lower the ball.
Mounts - Leveling Carry - Castor Type
Vibration Dampening with castor for movement.
Carry mount is a moveable mount in which the rubber mount is incorporated with a castor. Allows movement of machines and provides vibration dampening. Simply turn the adjusting hole with a screwdriver to lift or lower the castor.
Stainless steel pads for corrosive environments. Vibration dampening
Natural frequency 15 to 25 Hz vertical, 12 to 20 Hz radial. Mechanical resistance is equal to 10G of continuous acceleration.
Mounts - Spring - Eliptical Leaf - Heavy Duty
Nato approved naval XM mounts
304 Stainless leaves, nylon and stainless washers and stainless steel mesh damping compound. For extreme environments and conditions. Temperature range -150 Deg C to + 400 Deg C.
Mounts - Spring - Eliptical Leaf - Light Duty
Lightweight NATO approved X Mounts
The 6kg mount is designed to isolate lightweight equipment like computers, printers, electronics panels etc from shock and vibration. All vibration modes and stiffness indicated are for mounting on a flat horizontal surface where vertical indicates the downwards stiffness and horizontal indicates stiffness alonf the horizontal plane. Horizontal 2 figures are for inverted mounting. 304 Stainless leaves, nylon and stainless washers and polymer damping compound. Temperature range +10 Deg C to + 30 Deg C.
Adjustable Height.
Screw and base sold separately. Order both parts for a complete unit. Designed for efficient and economic installation of a wide range of machinery. Machines can be installed rapidly and economically without bolting down. Absorb both shock and vibration within the machine and protect machines from external disturbances. Height of adjustment is through a levelling screw passing through machine foot into tapped bush in steel cover.
Feet - Mounting - Bonded Neoprene
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
Housings - Bearing - 2 Bolt Mounting Plates
Chromic Anodised Aluminium mounting plates.
For standard radial ball bearings.
For mounting ends of Conidrive™ belting in reciprocating applications.
Aluminium Alloy. Supplied with socket head cap screws and internal lock washers.
Automat - Frame Kit Mounting Plates
See PDF file in FTP Directory for more information. Educational tool suitable for mechanical teaching institutions.
Decorative anodised aluminium.
Dual Vee - Wheel Plate Assembly - Wiper
Use with wheel plate assembly track.
Rail sold seperately. Match with correct Rail Size.
Automat - Frame Kit Side Plate
See PDF file in FTP Directory for more information. Educational tool suitable for mechanical teaching institutions.
Plexiglass - Clear Acrylic.
Couplings - Bellows - Set Screw - Brass with Tin Plate Finish
Housings - Bearing - Self Clinching - Miniature - Self Aligning
Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.
Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 Deg C to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.
Ball Transfer Units - Flange Mount - Standard Duty
For conveying materials. From miniature to large.
Bearings - Spyraflo - Flange Mount - Non Aligning
Low profile flange mounted needle roller and bronze bearings
See links at bottom of web page for more information.
Bearings - Spyraflo - Flange Mount - Self Aligning
Low profile self aligning flange mounted needle roller, acetal and bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment.
Bearings - SDP - PTFE Bronze - Flange Mount - Self Aligning
Self aligning to 5 Degrees on installation
Too many choices?
You have selected to see ALL categories including any of the following words: plate mounts
|
| |||||||||||||||||||||||||
| Select all items starting with... | |||||||||||||||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Or use the category search | ||||||||||||||||
|
| |||||||||||||||||||||||||
