All Items: Pins - Categories


Matching Part Numbers

Hide Pictures

Go to Top  


CP-INS-J-SPLN-20-H

Part number CP-INS-J-SPLN-20-H.

Description: Nom. OD (D): 20.0. Overall Length (L): 34.0. Overall Length (L): Spline Only.
Group: Couplings - Spline Type - Spare Poyurethane Splines

Stock: 3



CP-INS-J-SPLN-32-H

Part number CP-INS-J-SPLN-32-H.

Description: Nom. OD (D): 32.0. Overall Length (L): 48.0. Overall Length (L): Spline Only.
Group: Couplings - Spline Type - Spare Poyurethane Splines

Stock: 1



CP-INS-J-3J-B-38

Part number CP-INS-J-3J-B-38.

Description: OD: 38.1. Overall Length Assembled: 95.25. Material: Bost-Bronz.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-B-51

Part number CP-INS-J-3J-B-51.

Description: OD: 50.8. Overall Length Assembled: 122.17. Material: Bost-Bronz.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-B-64

Part number CP-INS-J-3J-B-64.

Description: OD: 63.5. Overall Length Assembled: 136.65. Material: Bost-Bronz.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-P-32

Part number CP-INS-J-3J-P-32.

Description: OD: 31.75. Overall Length Assembled: 58.92. Material: Polyurethane.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-P-38

Part number CP-INS-J-3J-P-38.

Description: OD: 38.1. Overall Length Assembled: 95.25. Material: Polyurethane.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-P-51

Part number CP-INS-J-3J-P-51.

Description: OD: 50.8. Overall Length Assembled: 122.17. Material: Polyurethane.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-P-64

Part number CP-INS-J-3J-P-64.

Description: OD: 63.5. Overall Length Assembled: 136.65. Material: Polyurethane.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-R-32

Part number CP-INS-J-3J-R-32.

Description: OD: 31.75. Overall Length Assembled: 58.92. Material: Rubber.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-R-38

Part number CP-INS-J-3J-R-38.

Description: OD: 38.1. Overall Length Assembled: 95.25. Material: Rubber.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-R-51

Part number CP-INS-J-3J-R-51.

Description: OD: 50.8. Overall Length Assembled: 122.17. Material: Rubber.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-3J-R-64

Part number CP-INS-J-3J-R-64.

Description: OD: 63.5. Overall Length Assembled: 136.65. Material: Rubber.
Group: Couplings - Three Jaw Type - Inserts

Stock: Backorder



CP-INS-J-SP-20-86

Part number CP-INS-J-SP-20-86.

Description: Suits Coupling OD: 20. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-20-92

Part number CP-INS-J-SP-20-92.

Description: Suits Coupling OD: 20. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-20-98

Part number CP-INS-J-SP-20-98.

Description: Suits Coupling OD: 20. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-30-86

Part number CP-INS-J-SP-30-86.

Description: Suits Coupling OD: 30. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-30-92

Part number CP-INS-J-SP-30-92.

Description: Suits Coupling OD: 30. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-30-98

Part number CP-INS-J-SP-30-98.

Description: Suits Coupling OD: 30. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-40-86

Part number CP-INS-J-SP-40-86.

Description: Suits Coupling OD: 40. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-40-92

Part number CP-INS-J-SP-40-92.

Description: Suits Coupling OD: 40. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SP-40-98

Part number CP-INS-J-SP-40-98.

Description: Suits Coupling OD: 40. -: -. -: -.
Group: Couplings - Spider Type A - Spiders Only

Stock: Backorder



CP-INS-J-SPLN-16-P

Part number CP-INS-J-SPLN-16-P.

Description: Nom. OD (D): 16.0. Overall Length (L): 27.0. Overall Length (L): Spline Only.
Group: Couplings - Spline Type - Spare Poyurethane Splines

Stock: Backorder



CP-INS-J-SPLN-20-P

Part number CP-INS-J-SPLN-20-P.

Description: Nom. OD (D): 20.0. Overall Length (L): 34.0. Overall Length (L): Spline Only.
Group: Couplings - Spline Type - Spare Poyurethane Splines

Stock: Backorder



CP-INS-J-SPLN-25-P

Part number CP-INS-J-SPLN-25-P.

Description: Nom. OD (D): 25.0. Overall Length (L): 40.9. Overall Length (L): Spline Only.
Group: Couplings - Spline Type - Spare Poyurethane Splines

Stock: Backorder



CP-INS-J-SPLN-32-P

Part number CP-INS-J-SPLN-32-P.

Description: Nom. OD (D): 32.0. Overall Length (L): 48.0. Overall Length (L): Spline Only.
Group: Couplings - Spline Type - Spare Poyurethane Splines

Stock: Backorder


Plungers Ball

Hide Pictures

Go to Top  


Pins - Locating - Spring - Plastic Pin - Sealed

Pins - Locating - Spring - Plastic Pin - Sealed

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Click for combined categories: All Locating Pins


Pins - Locating - Spring - Plastic Pin - Unsealed

Pins - Locating - Spring - Plastic Pin - Unsealed

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Click for combined categories: All Locating Pins


Pins - Locating - Spring - Stainless Pin - Unsealed

Pins - Locating - Spring - Stainless Pin - Unsealed

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Click for combined categories: All Locating Pins


Pins - Locating - Spring - Steel Pin - Sealed

Pins - Locating - Spring - Steel Pin - Sealed

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Click for combined categories: All Locating Pins


Pins - Locating - Spring - Steel Pin - Unsealed

Pins - Locating - Spring - Steel Pin - Unsealed

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Click for combined categories: All Locating Pins


Pins - Ball Lock

Hide Pictures

Go to Top  


Pins - Ball Lock - Ball Handle - Plastic Handle

Pins - Ball Lock - Ball Handle - Plastic Handle

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Commercial

Pins - Ball Lock - Button Handle - Commercial

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Stainless Steel

Pins - Ball Lock - Button Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Steel

Pins - Ball Lock - Button Handle - Steel

Heat treated 4130 alloy spindle and shank. Handles aluminium.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Double Acting - L-Handle - Stainless Steel

Pins - Ball Lock - Double Acting - L-Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel

Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Economy - Stainless Steel

Pins - Ball Lock - Economy - Stainless Steel

Economical pins that can be used in military or conventional equipment. Type 303 stainless steel.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Stainless steel pins used in aircraft industry, food processing machinery, marine equipment, laboratory and testing equipment. Commercial drill tolerances provide clearance for standard pins. 303 stainless steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Economy - Steel

Pins - Ball Lock - Economy - Steel

Economical pins that can be used in military or conventional equipment.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Flanged Receptacles

Pins - Ball Lock - Flanged Receptacles

Provide a permanent and proper mating hole for commercial and industrial type quick release ball lock pins.

Designed to be used on materials or in applications where the pin does not have anything to lock against. Pin does not protrude past the bottom of the receptacle so they are ideal for blind hole applications. 303 Stainless Steel. Mounted with screws, rivets or bolts. The quick release ball lock pins are inserted from the flanged end, and the ball extends into the wider opening at the top of the receptacle.

Pins - Ball Lock - High Tension - Industrial

Pins - Ball Lock - High Tension - Industrial

17-4 PH or PH15-7MO stainless steel shank. CRES440C stainless steel spindle. Four balls offer greater pullout strength.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - L-Handle - Industrial - Steel

Pins - Ball Lock - L-Handle - Industrial - Steel

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Half Ring Style

Pins - Ball Lock - Marine Style - Half Ring Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Recessed  Head

Pins - Ball Lock - Marine Style - Recessed Head

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Ring Style

Pins - Ball Lock - Marine Style - Ring Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Shackle

Pins - Ball Lock - Shackle

Pins will not release until spindle is depressed. Four balls for high loads. Body and spindle are made from 4130 alloy steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Shoulder Type - T Handle

Pins - Ball Lock - Shoulder Type - T Handle

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Commercial

Pins - Ball Lock - T-Handle - Commercial

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Plastic Handle

Pins - Ball Lock - T-Handle - Plastic Handle

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

17-4 PH or PH15-7MO stainless steel spindle and shank. Ground handling pins used in the handling of aircraft and service equipment.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Threaded End - Stainless Steel

Pins - Ball Lock - Threaded End - Stainless Steel

One end threaded so you can attach your own handle or knob.


Click for combined categories: All Ball Lock Pins


Pins - Clevis

Hide Pictures

Go to Top  


Pins - Clevis - Adjustable

Pins - Clevis - Adjustable

Multihole clevis pins for quick and easy adjustments

Made from 1010, 1018 or 1022 steel.

Click for combined categories: All Clevis Pins

Related Information:
Large Yokes

Cotter Pins


Pins - Clevis - Handle - Bent

Pins - Clevis - Handle - Bent

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle.

Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Handle - Straight - Plain

Pins - Clevis - Handle - Straight - Plain

Also known as Hitch Pins. Heat treated.


Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Handle - Straight - Powder Coated

Pins - Clevis - Handle - Straight - Powder Coated

Also known as Hitch Pins. Heat treated.


Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Plain

Pins - Clevis - Plain

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Threaded yokes to suit


Pins - Clevis - Self Locking

Pins - Clevis - Self Locking

No need for cotter pins. Inexpensive ball lock pin type.

Self locking and reusable with a spring loaded ball lock. Plated steel with stainless steel ball.

Click for combined categories: All Ball Lock Pins

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Pins - Clevis - Stainless Steel 304

Pins - Clevis - Stainless Steel 304

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Pins - Clevis - Stainless Steel 316

Pins - Clevis - Stainless Steel 316

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Pins - Clevis - Zinc Plated

Pins - Clevis - Zinc Plated

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Pins - Cotter

Hide Pictures

Go to Top  


Pins - Cotter - Plain

Pins - Cotter - Plain

Split pins.


Click for combined categories: All Cotter Pins


Pins - Cotter - Stainless Steel

Pins - Cotter - Stainless Steel

Split pins.


Click for combined categories: All Cotter Pins


Pins - Cotter - Zinc Plated

Pins - Cotter - Zinc Plated

Split pins.


Click for combined categories: All Cotter Pins


Pins - Dowel

Hide Pictures

Go to Top  


Pins - Dowel Bushings

Pins - Dowel Bushings

Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12.

Click for combined categories: All Dowel Pins


Pins - Dowel - Extractable

Pins - Dowel - Extractable

Hardened and Ground Steel 100 Cr6

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin. Hardness 55-62 HRC, HV550-650.

Click for combined categories: All Dowel Pins


Pins - Dowel - Extractable - With Flat

Pins - Dowel - Extractable - With Flat

Hardened and Ground Steel 100 Cr6 with a ground flat along one edge

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin. Hardness 55-62 HRC, HV550-650.

Click for combined categories: All Dowel Pins


Pins - Dowel - Standard - Hardened Steel - Chamfered End

Pins - Dowel - Standard - Hardened Steel - Chamfered End

Precision Dowel Pins - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins.

Click for combined categories: All Dowel Pins


Pins - Dowel - Standard - Stainless Steel - Chamfered End

Pins - Dowel - Standard - Stainless Steel - Chamfered End

Precision Dowel Pins - Various Corrosion Resistant Grades - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins.

Click for combined categories: All Dowel Pins


Pins - Dowel - Standard - Stainless Steel - Rounded Both Ends

Pins - Dowel - Standard - Stainless Steel - Rounded Both Ends

Precision Dowel Pins - Various Corrosion Resistant Grades - DIN7


Click for combined categories: All Dowel Pins


Pins - Groove

Pins - Groove

Non threaded press fit fastener that doesn't require a reamed hole as do dowel pins.Commonly used in place of taper pins.

An economic method of fastening without the need for precision drilled and reamed holes. Recommended hole tolerance is H11. Total length may be slightly longer than the nominal length. Expanded portion of the pin is compressed into the hole a few thousands of an inch wider than the nominal pin diameter. Radial forces lock the pin securely into the drilled hole.

Pins - Hammer Drive - Flat Head

Pins - Hammer Drive - Flat Head

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Click for combined categories: All Hammer Drive Pins


Pins - Hammer Drive - Round Head

Pins - Hammer Drive - Round Head

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Click for combined categories: All Hammer Drive Pins


Pins - General

Hide Pictures

Go to Top  


Pins - Clik - Carbon Steel

Pins - Clik - Carbon Steel

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Click for combined categories: All Clik Lynch Pins


Pins - Clik - Mild Steel

Pins - Clik - Mild Steel

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Click for combined categories: All Clik Lynch Pins


Pins - Hitch - External

Pins - Hitch - External

Similar to R-Clips, but designed for both arms to fit around a shaft groove rather thand having one arm through a bored hole.


Pins - Hydraulic Cylinder

Pins - Hydraulic Cylinder


Pins - Side Thrust - Double Sided - Steel Ball

Pins - Side Thrust - Double Sided - Steel Ball

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body.

Click for combined categories: All Side Thrust Pins


Pins - Side Thrust - Single Sided - Plastic Ball

Pins - Side Thrust - Single Sided - Plastic Ball

For holding, clamping and positioning work pieces. Body is black oxide steel.

Plastic ball and stainless spring with black oxide coated steel body.

Click for combined categories: All Side Thrust Pins


Pins - Side Thrust - Single Sided - Stainless Ball

Pins - Side Thrust - Single Sided - Stainless Ball

For holding, clamping and positioning work pieces. Body is black oxide steel.

Stainless ball and stainless spring with black oxide coated steel body.

Click for combined categories: All Side Thrust Pins


Pins - Side Thrust - Single Sided - Steel Ball

Pins - Side Thrust - Single Sided - Steel Ball

For holding, clamping and positioning work pieces. Body is black oxide steel.

Steel ball and elasticised spring with black oxide coated steel body.

Click for combined categories: All Side Thrust Pins


Pins - Pull

Hide Pictures

Go to Top  


Pins - Pull - Round Handle - Aluminium and Steel

Pins - Pull - Round Handle - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Round Handle - Stainless Steel

Pins - Pull - Round Handle - Stainless Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Round Handle - Steel

Pins - Pull - Round Handle - Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Tee Handle - Aluminium and Steel

Pins - Pull - Tee Handle - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Tee Handle - Stainless Steel

Pins - Pull - Tee Handle - Stainless Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Tee Handle - Steel

Pins - Pull - Tee Handle - Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Threaded End - Aluminium and Steel

Pins - Pull - Threaded End - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.

Click for combined categories: All Roll Pins


Pins - Pull - Threaded End - Stainless Steel

Pins - Pull - Threaded End - Stainless Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.

Click for combined categories: All Roll Pins


Pins - Pull - Threaded End - Steel

Pins - Pull - Threaded End - Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.

Click for combined categories: All Roll Pins


Pins - Roll

Hide Pictures

Go to Top  


Pins - Roll - Plain

Pins - Roll - Plain

Plain carbon spring steel DIN1481.


Click for combined categories: All Roll Pins


Pins - Roll - Stainless Steel - 300 Grade

Pins - Roll - Stainless Steel - 300 Grade

304 grade DIN1481.


Click for combined categories: All Roll Pins


Pins - Roll - Stainless Steel - 420 Grade

Pins - Roll - Stainless Steel - 420 Grade

420 grade DIN1481.


Click for combined categories: All Roll Pins


Pins - Roll - Zinc Plated

Pins - Roll - Zinc Plated

Zinc plated spring steel DIN1481.


Click for combined categories: All Roll Pins


Pins - Spirol - Plain

Pins - Spirol - Plain


Click for combined categories: All Roll Pins


Pins - Spirol - Stainless Steel

Pins - Spirol - Stainless Steel


Click for combined categories: All Roll Pins


Pins - Taper

Hide Pictures

Go to Top  


Pins - Taper - Imperial - Miniature

Pins - Taper - Imperial - Miniature

Imperial Sizes 1:48 Taper (1/4 in. per foot). Miniature sizes. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Pins - Taper - Imperial - Standard

Pins - Taper - Imperial - Standard

Imperial Sizes 1:48 Taper (1/4 in. per foot). Standard sizes numbers 0 to 14. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Pins - Taper - Metric

Pins - Taper - Metric

Metric Sizes 1:50 Taper

Metric Sizes to DIN 1.

Click for combined categories: All Metric Taper Pins

Related Information:
Miniature Imperial Taper Pin Sizes


Pins - Taper - Metric - Extractable - Internal Thread

Pins - Taper - Metric - Extractable - Internal Thread

1:50 Taper.

DIN 7978. Mild Steel.

Click for combined categories: All Metric Taper Pins


Pins - Wirelock

Hide Pictures

Go to Top  


Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel

Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Tools General Purpose

Hide Pictures

Go to Top  


Tools - Pin Vises

Tools - Pin Vises

Lengths shown are based on standard stock but may vary.

Click for combined categories: All Tools


Wrenches

Hide Pictures

Go to Top  


Tools - Pin Wrench

Tools - Pin Wrench

Used on nuts with two holes in the face.

Constructed of special blued steel.

Click for combined categories: All Tools


Latches

Hide Pictures

Go to Top  


Latches - Radial - Pin - Push Key

Latches - Radial - Pin - Push Key

Includes key


Hooks

Hide Pictures

Go to Top  


Shackles - Anchor - Screw Pin - 316 Stainless Steel

Shackles - Anchor - Screw Pin - 316 Stainless Steel

Meets US Federal specification RRC-271D Type IV


Click for combined categories: All Shackles


Shackles - Anchor - Screw Pin - Steel

Shackles - Anchor - Screw Pin - Steel

Forged carbon steel, self coloured.


Click for combined categories: All Shackles


Couplings Bellows

Hide Pictures

Go to Top  


Couplings - Bellows - Hiflex - Pin Hub

Couplings - Bellows - Hiflex - Pin Hub

Precise adjustment - Vibration resistance - Large misalignment capability. 0.01 to 9.17 Nm. 2000 rpm. - Zero Backlash

Wide torque range. Zero cyclic speed variation during 360 Deg. Rotation. Very low torsional deflection.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Plungers Ball

Hide Pictures

Go to Top  


Tools - Installation - Spring Locating Pin

Tools - Installation - Spring Locating Pin

locating spring pin installation tools are designed to make installation easier.

Click for combined categories: All Tools


Tension Bushings

Hide Pictures

Go to Top  


Bushings - Tension

Bushings - Tension

Like a heavy duty roll pin.

Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications.

Games Amusement

Hide Pictures

Go to Top  


Games - Gift Ideas

Games - Gift Ideas

Squiddy, lava drops, pin art, voice changer, chattermunk, juggling balls


Click for combined categories: All Games and Gadgets


Clips

Hide Pictures

Go to Top  


R Clips - Double Coil - Steel

R Clips - Double Coil - Steel

Also known as internal hitch pins, bridge pins or humpback pins


Click for combined categories: All R Clips


R Clips - Single Coil - Steel

R Clips - Single Coil - Steel

Also known as internal hitch pins, bridge pins or humpback pins


Click for combined categories: All R Clips


R Clips - Single Coil - Stainless Steel

R Clips - Single Coil - Stainless Steel

Also known as internal hitch pins, bridge pins or humpback pins


Click for combined categories: All R Clips


Clevis Joints

Hide Pictures

Go to Top  


Joints - Clevis - Plastic

Joints - Clevis - Plastic

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.

Click for combined categories: All Clevis Joints


Latches

Hide Pictures

Go to Top  


Latches - Adjustable Lever

Latches - Adjustable Lever

Die cast zinc with stainless steel springs and roll pins. Available in textured chrome or matte black powder coat. Working load 130kg. Ultimate load 210kg. M5 screws with lock washer supplied. Single hole installation.


Positioning

Hide Pictures

Go to Top  


Linear Positioner Units

Linear Positioner Units

Effective way to position heavy loadsquickly and easily. Single pin unit offers high rigidity with small deflection.



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154975 products in 3671 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.