Output Shafts - Small Parts And Bearings Categories


Clutches

Hide Pictures

Go to Top  


Clutches - Magnetic Particle 24VDC

Clutches - Magnetic Particle 24VDC

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Click for combined categories: All Magnetic Clutches


Gearmotors DC

Hide Pictures

Go to Top  


Gearmotors - DC - Size  25 Low Cost

Gearmotors - DC - Size 25 Low Cost

25mm Gearhead Body Diameter. 24.4mm Motor Body Diameter. Low cost. Reversible

D Shaped 4x8mm Output Shaft.

Click for combined categories: All DC Gearmotors


Gearboxes Offset

Hide Pictures

Go to Top  


Gearboxes - Offset -  60 x  60

Gearboxes - Offset - 60 x 60

Base mounted. SRBM60 Series.

Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : Less than 0.11mm / Less than 0.31mm. Operating Temp : -10 to 60 Deg C | Approx weight : 26 grams.

Click for combined categories: All Offset Gearboxes


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafts - Idler

Shafts - Idler

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Shafts - Pinion

Shafts - Pinion


Click for combined categories: All Shafts


Shafting General Purpose

Hide Pictures

Go to Top  


Shafts - Flexible - Panel Mount - Cased

Shafts - Flexible - Panel Mount - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Panel Mount - Open

Shafts - Flexible - Panel Mount - Open

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - Without Shaft

Rail Supports - Without Shaft

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearing in Housing

Linear Bearings


Rail Supports - With Shaft

Rail Supports - With Shaft

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings


Square Shaft

Hide Pictures

Go to Top  


Shafting - Linear - Square

Shafting - Linear - Square


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - With Shaft - One Piece

Rail Supports - With Shaft - One Piece

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings

Frelon Linear Bearings


Hobby Shafting

Hide Pictures

Go to Top  


Shafting - Ground - Hobby - Steel

Shafting - Ground - Hobby - Steel

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Shaft Assortments


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium

Shafting - Aluminium

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40Ám. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Ground - Silver Steel

Shafting - Ground - Silver Steel

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Precision - Chrome Plated

Shafting - Ground - Precision - Chrome Plated

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Hardened and recommended for use with precision bearings. Ends are not plated.


Shafting - Ground - Precision - High Carbon Steel

Shafting - Ground - Precision - High Carbon Steel

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 303 Grade

Shafting - Ground - Precision - Stainless 303 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 316 Grade

Shafting - Ground - Precision - Stainless 316 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 416 Grade Hardened

Shafting - Ground - Precision - Stainless 416 Grade Hardened

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 420 Grade Hardened

Shafting - Ground - Precision - Stainless 420 Grade Hardened

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 440C Grade Hardened

Shafting - Ground - Precision - Stainless 440C Grade Hardened

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Pipe - Aluminium

Shafting - Pipe - Aluminium

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40Ám. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Shafting - Supported - Pre-Drilled - Aluminium

Shafting - Supported - Pre-Drilled - Aluminium

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40Ám. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Keyed

Shafting - Keyed

Keyways are cut full length of each bar.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting


Shafting - Mild Steel

Shafting - Mild Steel

Great axles for low load and low precision applications like trolleys, carts and wheelbarrows.


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Cold Rolled Steel

Shafting - Ground - Cold Rolled Steel

Cold rolled steel with saw cut ends and smooth finish


Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Pre Drilled and Tapped - High Carbon Steel

Shafting - Pre Drilled and Tapped - High Carbon Steel

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting


Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Shafting - Pre Drilled and Tapped - Stainless Steel Steel

For use with rail supports and open linear bearings


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Oldham - Complete - Acetal Disk - Clamp Type

Couplings - Oldham - Complete - Acetal Disk - Clamp Type

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 Deg C to +60 Deg C. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Oldham - Complete - Acetal Disk - Set Screw

Couplings - Oldham - Complete - Acetal Disk - Set Screw

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 Deg C to +60 Deg C. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Shaft Locks

Hide Pictures

Go to Top  


Shaft Locks - Potentiometer

Shaft Locks - Potentiometer


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Cased

Shafts - Flexible - Coupling Ends - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Shafts - Stainless Steel

Splined Shafts - Stainless Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Splined Shafts - Steel

Splined Shafts - Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Fastlock

Collars - Shaft - Fastlock

No tools required.

Usable for Nonhardened Shafts. Inner body and Outer sleeve: 303 Stainless, Balls: 440C Stainless, Spring: 302 Stainless.

Click for combined categories: All Shaft Collars


Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Extenders - Shaft

Extenders - Shaft

Miniature and large shaft extenders and reducers


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Clamp Type - One Piece - Aluminium

Collars - Shaft - Clamp Type - One Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Collars - Shaft - Clamp Type - One Piece - Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Steel

Collars - Shaft - Clamp Type - One Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Aluminium

Collars - Shaft - Clamp Type - Two Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Steel

Collars - Shaft - Clamp Type - Two Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Fairloc

Collars - Shaft - Fairloc


Click for combined categories: All Shaft Collars


Collars - Shaft - Gripfast - 304 Stainless Steel

Collars - Shaft - Gripfast - 304 Stainless Steel

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Click for combined categories: All Shaft Collars

Related Information:
Similar prodct Fastlock Collars

ABS Plastic Gripfast Collars


Collars - Shaft - Gripfast - ABS Plastic

Collars - Shaft - Gripfast - ABS Plastic

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Click for combined categories: All Shaft Collars

Related Information:
Similar prodct Fastlock Collars

304 Stainless Gripfast Collars


Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hex Bore - One Piece - Steel

Collars - Shaft - Hex Bore - One Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel

Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hex Bore - Two Piece - Steel

Collars - Shaft - Hex Bore - Two Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hinged - Stainless Steel

Collars - Shaft - Hinged - Stainless Steel

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Hinged - Steel

Collars - Shaft - Hinged - Steel

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Standard - Stainless Steel

Collars - Shaft - Standard - Stainless Steel

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Collars - Shaft - Standard - Steel

Collars - Shaft - Standard - Steel

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Collars - Shaft - Stroke Adjustment - 303 Stainless

Collars - Shaft - Stroke Adjustment - 303 Stainless

Recommended tolerances for mating shaft diameter : h6. Use with rubber washers listed under WASHERS.

Click for combined categories: All Shaft Collars


Collars - Shaft - Stroke Adjustment - Steel

Collars - Shaft - Stroke Adjustment - Steel

Recommended tolerances for mating shaft diameter : h6. Use with rubber washers listed under WASHERS.

Click for combined categories: All Shaft Collars


Collars - Shaft - With Integral Shim

Collars - Shaft - With Integral Shim

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Click for combined categories: All Shaft Collars


Clutches

Hide Pictures

Go to Top  


Clutches - Shaft Mounted

Clutches - Shaft Mounted

24 V DC - Zero Backlash Armature - For parallel loads.

This basic information is designed to assist you to make a decision on which clutch to use. Full dimensions available on request.

Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill Blanks

Rod - Drill Blanks

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.

Click for combined categories: All Drill Rod


Rod - Drill - General

Rod - Drill - General

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil.

Click for combined categories: All Drill Rod

Related Information:
Silversteel


Rollers

Hide Pictures

Go to Top  


Rollers - Durasoft - Shaft Mount - Black Neoprene

Rollers - Durasoft - Shaft Mount - Black Neoprene

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.

Rollers - Durasoft - Shaft Mount - Coloured Urethane

Rollers - Durasoft - Shaft Mount - Coloured Urethane

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.

Rollers - Solid - Shaft Mount - Black Neoprene

Rollers - Solid - Shaft Mount - Black Neoprene

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.

Couplings Other

Hide Pictures

Go to Top  


Couplings - Clutch - Shaft Mounted

Couplings - Clutch - Shaft Mounted

0.565 to 14 N.m. For in-line loads.

24 Volt DC. Zero Backlash Armature. For in-line loads. Dynamic torque is 80% of static torque. 0.565 N.m Models have no keyway in rotor.

Related Information:
Shafting


Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Reducers - Bore

Reducers - Bore

Inch to Metric / Inch to Inch / Metric to Metric.

S = Recommended set screw positions. C = Recommended position for single set screw fastening. T = Recommended position for tangential screw in clamp hub.

Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Frelon Gold Lined - Closed - Precision

Bearings - Linear - Frelon Gold Lined - Closed - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon Gold Lined - Open - Precision

Bearings - Linear - Frelon Gold Lined - Open - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon Gold Lined - Closed - Standard

Bearings - Linear - Frelon Gold Lined - Closed - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon Gold Lined - Open - Standard

Bearings - Linear - Frelon Gold Lined - Open - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Ball Splines Linear

Hide Pictures

Go to Top  


Linear Ball Splines - Shaft

Linear Ball Splines - Shaft

Use with either flanged or unflanged Linear Ball Spline Bearings.


Click for combined categories: All Linear Ball Splines

Related Information:
Unflanged Bearings to Suit


Shafting Precision Ground

Hide Pictures

Go to Top  


Supports - Flanged Four Bolt

Supports - Flanged Four Bolt

For linear shafting.

Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Supports - Flanged Two Bolt

Supports - Flanged Two Bolt

For linear shafting.

Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Supports - Pedestal Two Bolt

Supports - Pedestal Two Bolt

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splines - Ball - Telescoping

Splines - Ball - Telescoping


Tensioners

Hide Pictures

Go to Top  


Tensioner - Drive - Single Adjusting - Shaft Mount

Tensioner - Drive - Single Adjusting - Shaft Mount

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Bushes - Unflanged - Steel

Splined Bushes - Unflanged - Steel

Internally splined bushes. Match with same size splined shafts.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Clutches

Hide Pictures

Go to Top  


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Click for combined categories: All Slip Clutches


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Bushes - Unflanged - Stainless Steel

Splined Bushes - Unflanged - Stainless Steel

Internally splined bushes. 416 stainless steel. Match with same size splined shafts.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Spacers

Hide Pictures

Go to Top  


Spacers - Round - Through Bore - Aluminium

Spacers - Round - Through Bore - Aluminium

Shaft spacers - Aluminium


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Spacers - Round - Through Bore - Brass

Spacers - Round - Through Bore - Brass

Shaft spacers - Brass


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Spacers - Round - Through Bore - Nylon

Spacers - Round - Through Bore - Nylon

Shaft spacers - Nylon


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Spacers - Round - Through Bore - Steel

Spacers - Round - Through Bore - Steel

Shaft spacers - Steel


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Spacers - Round - Through Bore - Stainless Steel

Spacers - Round - Through Bore - Stainless Steel

Shaft spacers - Stainless Steel


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby - 12.1mm Diameter

Gearmotors - Basic - Hobby - 12.1mm Diameter

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.

Click for combined categories: All Basic Gearmotors


Tensioners

Hide Pictures

Go to Top  


Tensioner - Adjustable Screw

Tensioner - Adjustable Screw

Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Tensioner - Fixed Angle

Tensioner - Fixed Angle

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Tensioner - Fixed Flanged

Tensioner - Fixed Flanged

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Tensioner - Heavy Duty - Type 3

Tensioner - Heavy Duty - Type 3

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.

Click for combined categories: All Tensioner Arms


Tensioner - Horizontal Mount

Tensioner - Horizontal Mount

Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.

Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).

Click for combined categories: All Tensioner Arms


Tensioner - Reversible Drive

Tensioner - Reversible Drive

Use with idler shafts and idler pulleys. Has the ability for continued tension on reversible drives by using a floating arm that automatically relocates when the drive direction reverses.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Tensioner - Vertical Mount

Tensioner - Vertical Mount

Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Power Supplies

Hide Pictures

Go to Top  


Power Supplies

Power Supplies

24 V DC.

Standard : 24V DC Output, 110V AC input. Available on special order : 12V DC Output, 220/230V AC input.

Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Open

Bearings - Linear - Ball - Open

For running on shafts supported by a rail along their length.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 Deg C Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Tensioners

Hide Pictures

Go to Top  


Tensioner - Drive - Adjustable Flanged

Tensioner - Drive - Adjustable Flanged

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Click for combined categories: All Tensioner Arms


Tensioner - Heavy Duty - Type 1

Tensioner - Heavy Duty - Type 1

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws.

Click for combined categories: All Tensioner Arms


Tensioner - Heavy Duty - Type 2

Tensioner - Heavy Duty - Type 2

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90o and is anchored by set screws.

Click for combined categories: All Tensioner Arms


Tensioner - Heavy Duty - Type 4

Tensioner - Heavy Duty - Type 4

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.

Click for combined categories: All Tensioner Arms


Bearings Press In

Hide Pictures

Go to Top  


Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 Deg C. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Click for combined categories: All Press In Bearings



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155213 products in 3609 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.