About Us Brands Contact FAQ Freight Payments Products Technical More Links...

Small Parts and Bearings
Other Couplings (Full Range)


Couplings Other

TopHide Pictures

Couplings - Ball
Couplings - Ball

Match Strength: 100%

High Speed - Up to 15o Angular Offset. 0.17 to 22.6 N.m Torque. Up to 20,000 rpm.

Speed Ratings :. 20000 RPM at up to 5o Operating Angle. 10000 RPM at 6 to 10o Operating Angle (Torque Reduction 50%). 5000 RPM at 11 to 15o Operating Angle (Torque Reduction 66%). Nylon centred units provide electrical insulation between shafts.

Related Information:
Shafting

Couplings - K Type
Couplings - K Type

Match Strength: 100%

Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:
Shafting

Couplings - Membrane
Couplings - Membrane

Match Strength: 100%

Zero backlash, maintenance free, recommended temperature range -10 Deg C to +80 Deg C, electically isolating

Anodised aluminium hubs. Polyamide 6.6 fibreglass re-inforced membrane. Max Speed 12000 RPM. Misalignment - Radial 0.25mm, Axial +/- 0.4mm, Angular 2.5 Deg. Ideal for light duty applications where a compact overall length is necessary. The membrane coupling offers very good misalignment capabilities using a fiberglass reinforced center, which also provides good vibration damping and electrical insulation.

Related Information:
Shafting

Couplings - Uniflex
Couplings - Uniflex

Match Strength: 100%

High speed to 30000 rpm. 2.3 to 9.27 Nm.

Spring : 1095 Steel Hubs : Cold Rolled Steel. Operating Temperature : 121 oC (250 Deg F). Maximum Speed : 30000 RPM. For CUF15 series the spring diameter is the same as the hub diameter.

Related Information:
Shafting

Couplings - BoWex - Junior
Couplings - BoWex - Junior

Match Strength: 100%

Nylon 2 piece and 3 piece couplings. 5 to 24 Nm. 6000 rpm max.

Approved distribution through the Australian Wholesaler (Deanquip). Crowned gear teeth - No need for lubrication. Chemical resistant nylon. Electrically insulated. Grub Screw opposite Keyway.

Related Information:
Shafting

Couplings - Control Flex
Couplings - Control Flex

Match Strength: 100%

0.45 to 6.44 Nm.

MATERIALS: Hubs - Aluminium, Pins - Hardened Alloy Steel, Socket Head Screws - Alloy Steel, Control-Flex Member - Delrin(R) 100. Lightweight, low inertia, and no maintenance or lubrication necessary. No change in angular velocity or torque due to misalignment. No end thrust due to torque transmission. Rated torques are with all alignment factors zero. The summation of the three alignment factors should not exceed 50%. The rated torque must be reduced by the summation of the alignment factors. Operating Temperature: -23 deg to +65 oCelsius.

Related Information:
Shafting

Couplings - Disc - Flexible
Couplings - Disc - Flexible

Match Strength: 100%

High torque. No backlash. Clamp fixing.

Aluminium A2017 Hubs. Aluminium A2011 Spacer. Stainless Steel 301 Pin. Stainless Steel 303 Disc.


Couplings - Eccentric Drive
Couplings - Eccentric Drive

Match Strength: 100%

1.88mm bore press fits most standard hobby motors (2mm shaft)


Couplings - Neo-Flex
Couplings - Neo-Flex

Match Strength: 100%

0.71 to 1.27 Nm.

303 stainless steel with 73 durometer neoprene centre. Shaft to shaft insulation. Torsional vibration isolation. Ribbed style are more flexible than smooth style. Bore Tolerances: +0.025 / -0.000.

Related Information:
Shafting

Couplings - Torque Tube
Couplings - Torque Tube

Match Strength: 100%

Internal compression spring preloads the ends against axial movement and backlash. Up to 2.8 Nm. Up to 2000 rpm.

Maximum Torque: 2.8 N.m (25 lb.in). Delrin Torque Tube. Aluminium Split Hubs. Do not compress the unit axially during installation. Speeds to 2000 rpm. One piece assembly.

Related Information:
Shafting

Couplings - Uni-lat
Couplings - Uni-lat

Match Strength: 100%

0.3 to 3.5 Nm. 3000 to 6000 rpm.

Hubs (UNL18 & 27): Brass CZ 121 Chromate & passivate finish. Hubs (UNL34 and 41):Alum. Alloy 2011 T8 Alocrom finish. Bearing Rings: Black Acetal. Operating Temp. Range: -20oC to +60oC. 10o angular and 1mm radial compensation. Flex-free mechanical action - low bearing loads.

Related Information:
Shafting

Couplings - Vibration Absorption
Couplings - Vibration Absorption

Match Strength: 100%

For servo and stepper motors. Backlash free. Cap screw fixing.

Aluminium A2017 Hub. HNBR Anti-Vibration Rubber Insert. Black Oxide Coated Cap Screw SCM435 Steel. Minus 20 oC to 80 Deg C Operating Temperature. High torque. High response. Zero backlash. Electrical insulation.


Couplings - Clutch - Shaft Mounted
Couplings - Clutch - Shaft Mounted

Match Strength: 99%

0.565 to 14 N.m. For in-line loads.

24 Volt DC. Zero Backlash Armature. For in-line loads. Dynamic torque is 80% of static torque. 0.565 N.m Models have no keyway in rotor.

Related Information:
Shafting

Couplings - Disc - Flexible - Miniature
Couplings - Disc - Flexible - Miniature

Match Strength: 99%

Twin disc zero backlash


Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium

Match Strength: 99%

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:
Shafting

Couplings - Geargrip - Standard - Complete
Couplings - Geargrip - Standard - Complete

Match Strength: 99%

Also see combined categories:
All Standard Geargrip Components

0.67 to 6.78 Nm. Max speed 3000 rpm.

Sleeve - Neoprene with Ground OD; Hub - Zinc Alloy Die Casting. Suitable operating temperature is -28 to 70 Deg. Celsius. Features: no lubrication, electrically isolated, dampens shock and vibration.

Related Information:
Geargrip Standard Hubs

Couplings - Safety - Collet Clamp

Match Strength: 99%


Couplings - Single Disk - Aluminium
Couplings - Single Disk - Aluminium

Match Strength: 99%

0.7 to 19 Nm. 2400 to 10000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.

Related Information:
Shafting

Couplings - Sleeve Type - Complete
Couplings - Sleeve Type - Complete

Match Strength: 99%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:
Shafting

Couplings - Sleeve Type - Hubs
Couplings - Sleeve Type - Hubs

Match Strength: 99%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:
Shafting

Couplings - Sleeve Type - Sleeves
Couplings - Sleeve Type - Sleeves

Match Strength: 99%

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:
Shafting

Couplings - Slip - Spring Wrapped
Couplings - Slip - Spring Wrapped

Match Strength: 99%

Tension control - transmission overload protection. 0.035 to 1.69 Nm.

Coupling is sliped over one shaft and screws tightened. Second shaft is inserted into other end. Loose end of coupling is pulled back about 0.5mm then screws tightened. Serves as a torque limiter as well as a coupling. Long life under continuous slip applications.

Related Information:
Shafting

Couplings - Cross Joint - High Speed
Couplings - Cross Joint - High Speed

Match Strength: 99%

0.3 to 6 N.m. 15000 to 42000 rpm.

Aluminium A2017 Hubs. Stainless Steel SUS304 Spacers. Hardened Steel Bearing Pins. Abrasion Resistant Polyamide Bush. SCM435 Black Coated Steel Cap Screws.

Related Information:
Shafting

Couplings - Crowned Tooth Gear - Complete
Couplings - Crowned Tooth Gear - Complete

Match Strength: 99%

Steel hubs with Moulded Nylon Sleeve.

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:
Shafting

Couplings - Double Disk - High Torque
Couplings - Double Disk - High Torque

Match Strength: 99%

Zero Backlash - Clamp Locking - Medium torsional stiffness.

High torsional stiffness and high response. Zero backlash. Hub: Aluminium (A2017) Spacer: Aluminium (A2011). Pin: Stainless Steel (SUS301) Disk: Stainless Steel (SUS303). Maximum Temperature: +100oC. 2.8 to 22 Nm. 2400 to 4800 rpm. Identical clockwise & anti-clockwise rotational characteristics.

Related Information:
Shafting

Couplings - Geargrip - Precision - Hubs Only
Couplings - Geargrip - Precision - Hubs Only

Match Strength: 99%

Also see combined categories:
All Precision Geargrip Components

Match with sleeves from sleeves category


Couplings - Geargrip - Precision - Sleeves Only
Couplings - Geargrip - Precision - Sleeves Only

Match Strength: 99%

Also see combined categories:
All Precision Geargrip Components

Match with hubs from hubs category


Couplings - Geargrip - Standard - Hubs Only
Couplings - Geargrip - Standard - Hubs Only

Match Strength: 99%

Also see combined categories:
All Standard Geargrip Components

0.67 to 6.78 Nm. Max speed 3000 rpm.


Couplings - Geargrip - Standard - Sleeves Only
Couplings - Geargrip - Standard - Sleeves Only

Match Strength: 99%

Also see combined categories:
All Standard Geargrip Components

0.67 to 6.78 Nm. Max speed 3000 rpm.





Couplings - BoWex - Tooth Driven - Sintered Steel
Couplings - BoWex - Tooth Driven - Sintered Steel

Match Strength: 99%

Also see combined categories:
All Insert and Jaw Type Couplings

Sintered steel hubs and nylon centre sleeve

Operating temp range -25 oC to 100 Deg C. Maintenance free. Compensates for axial, radial and angular shaft displacement. Easy to assemble. Alternative bore and keyway sizes can be supplied on approx 5 weeks delivery. Please contact our sales staff to arrange this.


Couplings - BoWex - Tooth Driven - Stainless Steel
Couplings - BoWex - Tooth Driven - Stainless Steel

Match Strength: 99%

Also see combined categories:
All Insert and Jaw Type Couplings

Corrosion resistant stainless steel hubs and polyamide centre sleeve

Hubs 320 518/31 (316 Ti) 1.4571 Stainless Steel.


Couplings - Crowned Tooth Gear - Hubs Only
Couplings - Crowned Tooth Gear - Hubs Only

Match Strength: 99%

Match with sleeves from the sleeves category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:
Shafting

Couplings - Crowned Tooth Gear - Sleeve Only
Couplings - Crowned Tooth Gear - Sleeve Only

Match Strength: 99%

Match with hubs from the hubs category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:
Shafting

Couplings - Double Disk - Aluminium - High Response
Couplings - Double Disk - Aluminium - High Response

Match Strength: 99%

0.6 to 25 Nm. 11000 to 42000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.



Couplings - Single Disk - Aluminium - High Response
Couplings - Single Disk - Aluminium - High Response

Match Strength: 99%

0.6 to 25 Nm. 11000 to 42000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.

Related Information:
Shafting

Couplings - Double Disk - Stainless Steel - High Response
Couplings - Double Disk - Stainless Steel - High Response

Match Strength: 99%

0.5 to 15 Nm. 11000 to 42000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.



Couplings - Miniflex - Stainless Steel Flat Wire Type
Couplings - Miniflex - Stainless Steel Flat Wire Type

Match Strength: 99%

Light metal hubs and stainless steel wire. Up to 120 Deg C.


Couplings - Single Disk - Stainless Steel - High Response
Couplings - Single Disk - Stainless Steel - High Response

Match Strength: 99%

0.5 to 15 Nm. 11000 to 42000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.

Related Information:
Shafting

Couplings Bellows

TopHide Pictures

Couplings - Bellows - External Clamp and Set Screw - Brass
Couplings - Bellows - External Clamp and Set Screw - Brass

Match Strength: 91%

Also see combined categories:
All Bellows Couplings

Zero Backlash - Tin Plate - Angular Misalignment up to 5o

Phosphor Bronze Bellows. Brass set screw hub one end, berrylium copper clamp hub other end. Match with precision or commercial gear clamps - see link.

Related Information:
Shafting

Dubro Accessories

TopHide Pictures

Dubro Accessories Listed by Description
Dubro Accessories Listed by Description

Match Strength: 76%

Accessories for model airplanes and other hobbies.

Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.


Handles

TopHide Pictures

Handles - Clean Line - Style 2
Handles - Clean Line - Style 2

Match Strength: 74%

Also see combined categories:
All Handles

High impact strength special technopolymer, in white similar to RAL 9002 with bright finish. Resistant to solvents, oils, greases and other chemical agents. Push fitting on plain shaft made from standard h9 tolerance bright drawn stock bars. Elastic coupling: the handle is not affected by vibrations and does not tend to loosen.


Dental Handpiece Parts

TopHide Pictures

Coupling - Low Speed Kavo Parts
Coupling - Low Speed Kavo Parts

Match Strength: 62%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Coupling - Multiflex Kavo Parts
Coupling - Multiflex Kavo Parts

Match Strength: 62%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Coupling NSK Parts
Coupling NSK Parts

Match Strength: 62%

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Couplings Bellows

TopHide Pictures

Couplings - Bellows - Clamp - Stainless Steel 0.1 to 10Nm
Couplings - Bellows - Clamp - Stainless Steel 0.1 to 10Nm

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Stainless steel bellows with Aluminium hub


Couplings - Bellows - Clamp - Stainless Steel 18 to 500Nm
Couplings - Bellows - Clamp - Stainless Steel 18 to 500Nm

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Stainless steel bellows with Aluminium hub up to 60mm Diameter and Steel hub 80mm and over


Couplings - Bellows - Conical Hub - Stainless Steel 18 to 5000Nm
Couplings - Bellows - Conical Hub - Stainless Steel 18 to 5000Nm

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Stainless steel bellows with Steel hub


Couplings - Bellows - Expanding Clamp - Stainless Steel 0.5 to 10Nm
Couplings - Bellows - Expanding Clamp - Stainless Steel 0.5 to 10Nm

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Stainless steel bellows with Aluminium hub


Couplings - Bellows - External Clamp - Brass
Couplings - Bellows - External Clamp - Brass

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Zero Backlash - Tin Plate - Angular Misalignment up to 10o (Refer Tables)

Phosphor Bronze Bellows. Beryllium Copper Hubs. Match with precision or commercial gear clamps - see link.

Related Information:
Shafting


Couplings - Bellows - Hiflex - Clamp Hub
Couplings - Bellows - Hiflex - Clamp Hub

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Precise adjustment - Vibration resistance - Large misalignment capability. 0.01 to 9.17 Nm. 2000 rpm. - Zero Backlash

Wide torque range. Zero cyclic speed variation during 360 Deg. Rotation. Very low torsional deflection.

Related Information:
Shafting

Couplings - Bellows - Hiflex - Integral Clamp Hub
Couplings - Bellows - Hiflex - Integral Clamp Hub

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Precise adjustment - Vibration resistance - Large misalignment capability. 0.01 to 9.17 Nm. 2000 rpm. - Zero Backlash

Wide torque range. Zero cyclic speed variation during 360 Deg. Rotation. Very low torsional deflection.

Related Information:
Shafting

Couplings - Bellows - Hiflex - Pin Hub
Couplings - Bellows - Hiflex - Pin Hub

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Precise adjustment - Vibration resistance - Large misalignment capability. 0.01 to 9.17 Nm. 2000 rpm. - Zero Backlash

Wide torque range. Zero cyclic speed variation during 360 Deg. Rotation. Very low torsional deflection.

Related Information:
Shafting

Couplings - Bellows - Integral Clamp - 316 Stainless
Couplings - Bellows - Integral Clamp - 316 Stainless

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Related Information:
Shafting

Couplings - Bellows - Integral Clamp - Aluminium
Couplings - Bellows - Integral Clamp - Aluminium

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Phosphor Bronze Bellows. Aluminium Hubs.

Related Information:
Shafting

Couplings - Bellows - Integral Clamp - Brass
Couplings - Bellows - Integral Clamp - Brass

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Zero Backlash - Constant Angular Velocity - Dampens vibration and noise - Tin plate finish

Phosphor Bronze Bellows. Brass Hubs.

Related Information:
Shafting

Couplings - Bellows - Modular
Couplings - Bellows - Modular

Match Strength: 62%

Interchangeable bushings for a variety of bore sizes.

1 Coupling consists of: 2 Bushings - 2 Clamps - 1 Bellows. Choose all 5 parts from any one size group. Bushings may be interchanged within any size group.

Related Information:
Shafting

Couplings - Bellows - Outer Conical Hub - Stainless Steel 18 to 5000Nm
Couplings - Bellows - Outer Conical Hub - Stainless Steel 18 to 5000Nm

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Stainless steel bellows with Steel hub


Couplings - Bellows - Set Screw - 316 Stainless
Couplings - Bellows - Set Screw - 316 Stainless

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Related Information:
Shafting

Couplings - Bellows - Set Screw - Aluminium
Couplings - Bellows - Set Screw - Aluminium

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Phosphor Bronze Bellows. Aluminium Hubs.

Related Information:
Shafting

Couplings - Bellows - Set Screw - Brass
Couplings - Bellows - Set Screw - Brass

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Phosphor Bronze Bellows. Brass Hubs.

Related Information:
Shafting

Couplings - Bellows - Set Screw - Brass with Tin Plate Finish
Couplings - Bellows - Set Screw - Brass with Tin Plate Finish

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Phosphor Bronze Bellows. Brass with Tin Plate Finish Hubs.

Related Information:
Shafting

Couplings - Bellows - Set Screw - Stainless Steel 0.1 to 10Nm
Couplings - Bellows - Set Screw - Stainless Steel 0.1 to 10Nm

Match Strength: 62%

Also see combined categories:
All Bellows Couplings

Stainless steel bellows with Aluminium hub

Max speed 15000 rpm. Bore tolerance H7. Temperature range minus 30 to plus 120 oC.


Couplings Helical and Slit

TopHide Pictures

Couplings - Flex Beam - Clamp Style
Couplings - Flex Beam - Clamp Style

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Zero backlash machined from a single piece of aluminium and featuring two sets of spiral cuts.

Higher torque and reduced windup compared to commodity type single beam couplings.


Couplings - Flex Beam - Set Screw Style
Couplings - Flex Beam - Set Screw Style

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Zero backlash machined from a single piece of aluminium and featuring two sets of spiral cuts.

Higher torque and reduced windup compared to commodity type single beam couplings.


Couplings - Helical - Long Series
Couplings - Helical - Long Series

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

2.9 to 31.4 Nm.

5o max angular misalignment. 0.762 mm Parallel offset. +/- 0.254 mm Axial motion. Zero backlash.

Related Information:
Shafting

Couplings - Helical - Low Inertia
Couplings - Helical - Low Inertia

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

0.8 to 13.2 Nm.

5o max angular misalignment. 0.254 mm Parallel offset. +/- 0.203 mm Axial motion. Zero backlash.

Related Information:
Shafting

Couplings - Helical - Precision
Couplings - Helical - Precision

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

0.14 to 9 Nm. 25000 max RPM.

5o max angular misalignment. 0.076 mm Parallel offset. Zero Axial motion. Zero backlash.

Related Information:
Shafting

Couplings - Helical - Short - Ondrives
Couplings - Helical - Short - Ondrives

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Material: 303 S3U Stainless.

Related Information:
Shafting

Couplings - Helical - Standard
Couplings - Helical - Standard

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

0.1 to 16.2 Nm.

Zero backlash. Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm.

Related Information:
Shafting

Couplings - Reli-a-flex - Long Series - Clamp Type
Couplings - Reli-a-flex - Long Series - Clamp Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:
Shafting

Couplings - Reli-a-flex - Long Series - Set Screw Type
Couplings - Reli-a-flex - Long Series - Set Screw Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:
Shafting

Couplings - Reli-a-flex - Short Series - Clamp Type
Couplings - Reli-a-flex - Short Series - Clamp Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:
Shafting

Couplings - Reli-a-flex - Short Series - Set Screw Type
Couplings - Reli-a-flex - Short Series - Set Screw Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Related Information:
Shafting

Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Aluminium
Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Aluminium

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Flexible.


Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Stainless Steel
Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Stainless Steel

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

303 Stainless Steel - Flexible.


Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium
Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Flexible.


Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Stainless Steel
Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Stainless Steel

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Stainless Steel - Flexible.






Couplings - Slit Type - Plastic - Clamp Hub
Couplings - Slit Type - Plastic - Clamp Hub

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Lightweight molded patented coupling can replace many stainless or aluminum slit type couplings with lost coast and improved operation.

No windup or backlash or any derating for reversing applications. To ensure tight fit between shaft and coupling, a metal screw to metal nut design is used and does not utilize threads cut into moulded piece. Operating temperature -20o to 140o Celius. Made of Engineered polymer with stainless fastners. UV reisitant. Voltage and RF isolation.


Couplings - Slit Type - Plastic - Set Screw
Couplings - Slit Type - Plastic - Set Screw

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Lightweight molded patented coupling can replace many stainless or aluminum slit type couplings with lost coast and improved operation.

No windup or backlash or any derating for reversing applications. To ensure tight fit between shaft and coupling, a metal screw to metal nut design is used and does not utilize threads cut into moulded piece. Operating temperature -20o to 140o Celius. Made of Engineered polymer with stainless fastners. UV reisitant. Voltage and RF isolation.


Couplings - Slit Type - Standard
Couplings - Slit Type - Standard

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.

High Torsional Stiffness. Zero Backlash.

Related Information:
Shafting

Couplings - Spiral Beam - 6 Beam - Acetal - Clamp Type
Couplings - Spiral Beam - 6 Beam - Acetal - Clamp Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Related Information:
Shafting

Couplings - Spiral Beam - 6 Beam - Acetal - Set Screw Type
Couplings - Spiral Beam - 6 Beam - Acetal - Set Screw Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Related Information:
Shafting

Couplings - Spiral Beam - 6 Beam - Aluminium - Clamp Type
Couplings - Spiral Beam - 6 Beam - Aluminium - Clamp Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Related Information:
Shafting

Couplings - Spiral Beam - 6 Beam - Aluminium - Set Screw Type
Couplings - Spiral Beam - 6 Beam - Aluminium - Set Screw Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Related Information:
Shafting

Couplings - Spiral Beam - 6 Beam - Stainless Steel - Clamp Type
Couplings - Spiral Beam - 6 Beam - Stainless Steel - Clamp Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Related Information:
Shafting

Couplings - Spiral Beam - 6 Beam - Stainless Steel - Set Screw Type
Couplings - Spiral Beam - 6 Beam - Stainless Steel - Set Screw Type

Match Strength: 62%

Also see combined categories:
All Helical and Slit Couplings

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Related Information:
Shafting

Couplings Insert and Jaw Type

TopHide Pictures

Couplings - HRC
Couplings - HRC

Match Strength: 62%

Also see combined categories:
All Insert and Jaw Type Couplings

Related Information:
Shafting


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Actuators Adhesives Adjusters Air Springs Airmovers Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Balsa Bar Bases Batteries Bearings Acetal Bearings Angular C... Bearings Automotive Bearings Ball Bearings Conveyor Bearings Crossed R... Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bearings Tapered R... Bearings Thrust Bearings Turbine Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts Flat Belts Rounthane Belts and Pulleys ... Blow Guns Bolts Books Bottles and Cans Brakes Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Buzzers Cable Cable Ties Cam Followers Cams Capacitors Carburettor Parts Carousels Cases Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Chips Circlips

Visa Card Accepted
Visa
Secure Checkout


Clamping Bushings Clamping Rings Clamps Cleaning Products Clevis Joints Clips Cloth Clutches Collars Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Magnetic Couplings Other Couplings Rigid Cranks and Wheels Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Dials Differentials Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Dubro Accessories Educational Projects Enclosures Engineering Sets Engineering and Ho... Epoxies Eyebolts Fasteners General Fastening Bushings Fishing Reel Parts Fittings Flexible Shaft Foam Food Processor Parts Framing

Master Card Accepted
Mastercard
Secure Checkout


Gadgets Games Amusement Games General Gas Springs Gear Blanks Gear Joining Gauges Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes BuOrd Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Power Gearboxes Right Angle Gearboxes Tee Gearheads BuOrd Gearheads Inline Gearheads MAX Gearheads Right Angle Gearmotors Gearmotors AC Gearmotors Basic Gearmotors DC Gearmotors DC Perm... Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Imperial Worms Gears Metric AntiB... Gears Metric Bevel

Pay By
Phone after Checkout
07 3245 7977
International +61 7 3245 7977


Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hinges Hobby Gears Hobby Servo Motors Hobby Shafting Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings to Suit B... Housings with Inte... Hubs ISOPADS Indexing Insulators Isolators Isomounts Jackmounts Jigsaws Keys Keys and Keysteel Kites Knob Kits Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe

Amex Accepted
Amex
Secure Checkout


Knobs Lock Knobs Mushroom Knobs Oval Knobs Pointer Knobs Precision Knobs Push Pull Knobs Round Knobs Soft Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Lazy Susans Leads and Connectors Leadscrew Actuators Leadscrews Levers Lifting Chain Linear Slides Locking Assemblies Locking Bushings Locking Compounds Locks Lubricants General... Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Ferrite Magnets Rare Earth Magnets Rubber and... Marking Measuring Equipment Measuring Gauges Medical Model Jet Turbine ... Modelling Materials

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Motor Drives Stepper Motors DC Motors DC MAX Series Motors Hybrid Stepper Motors Industrial ... Motors Stepper Motors Vibrating Motors with Gearhe... Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Finger Flex Mounts Leveling Mounts M Style Mounts Machinery Mounts Plate Mounts Rectangular Mounts Ring Mounts Square Mounts Uniload Mounts V Style Mounts Wedge Nuts Nuts Lock ORings ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Parts Bundles Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel

Visa Card Accepted
Visa
Secure Checkout


Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Plastic Plugs Plungers Ball Plungers Indexing Plungers Spring Positioning Power Adaptors Power Supplies Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Flat Belt Pulleys Grooved Pulleys Idler Pulleys PosiDrive Pulleys Synchromesh Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Resins Rivets Robotic Servo Motors Robotic Wheels Rod Ends Rollers Rope and Cable Rotary Safety Channel Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach

Master Card Accepted
Mastercard
Secure Checkout


Screws Countersunk Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sensors Sets Shaft Extenders an... Shaft Locks Shafting Aluminium Shafting General P... Shafting Hollow Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Solar Parts Solarbotics Kits Soldering Spa Jet Motor Bear... Spacers Splined Shafts and... Spring Anchors Spring Assemblies Spring Damped Mounts Spring Motors

Pay By
Phone after Checkout
07 3245 7977
International +61 7 3245 7977


Spring Mounts Spring Reels Spring Washers Spring Wire Springs Anti Backlash Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General Springs Torsion Sprockets PosiDrive Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stays Steam Engine Parts Straps Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Suspension Units Switches Tape Taper Grips Tee Joints Tension Bushings Tensioners Testers Thread Thread Inserts Threaded Rod Throwing Planes Timing Belt Lengths Timing Belts and P...

Amex Accepted
Amex
Secure Checkout


Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Crimping Tools Cutting Tools Deburring Tools Dental Repair Tools General Purpose Tools Magnetic Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Torches Tracks Tube and Tubing Turntables Universal Joint Co... Universal Joints VRings Vacuum Cleaners Vee Belts Washers Aligning Washers Finishing

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 148416 products in 3925 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.