Quick Delivery Items: One Way Clutch Bearings - Small Parts And Bearings Categories


Bearings One Way Clutch

Hide Pictures

Go to Top  


Bearings - One Way - Sprag - Standard

Bearings - One Way - Sprag - Standard

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes. Designed for press fit installation.

Click for combined categories: All One Way Clutch Bearings


Bearings - One Way - Roller

Bearings - One Way - Roller

Roller Clutch Bearings rotate in one direction only.

Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.

Click for combined categories: All One Way Clutch Bearings


Lazy Susans

Hide Pictures

Go to Top  


Lazy Susan Bearings

Lazy Susan Bearings

One unit construction for maximum stability and quiet running. Used to make light weight turntables.

Centre opening allows for a centre post if required.

Fishing Reel Parts

Hide Pictures

Go to Top  


Bass One Shimano Parts

Bass One Shimano Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Grooved Race Type

Bearings - Thrust - Ball - Grooved Race Type

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Flat Race Type

Bearings - Thrust - Ball - Flat Race Type

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Ceramic Hybrid

Bearings - Ball - Ceramic Hybrid

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.

Click for combined categories: All Radial Ball Bearings


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - With Shaft - One Piece

Rail Supports - With Shaft - One Piece

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings

Frelon Linear Bearings


Linear Slides

Hide Pictures

Go to Top  


Slides - Linear - Cross Roller Rail

Slides - Linear - Cross Roller Rail

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.

Click for combined categories: All Linear Slides


Sleeves

Hide Pictures

Go to Top  


Sleeves - Square Hole - Threaded - Carbon Steel

Sleeves - Square Hole - Threaded - Carbon Steel

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.


Click for combined categories: All Square Hole Sleeves


Positioning

Hide Pictures

Go to Top  


Linear Positioner Units

Linear Positioner Units

Effective way to position heavy loadsquickly and easily. Single pin unit offers high rigidity with small deflection.


Linear Slides

Hide Pictures

Go to Top  


Linear - Mini Rail - Self-Lubricating - Carriage and Rail

Linear - Mini Rail - Self-Lubricating - Carriage and Rail

Comes with one carriage. Spare carriages sold separately - match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Nuts

Hide Pictures

Go to Top  


Nuts - Well

Nuts - Well

Flanged neoprene bushing with a brass machine nut moulded into one end. Tightening a conventional machine screw threaded in a brass nut causes the insert to expand, making a secure fastening. 1. Place the Well Nut(R) insert all the way into a pre-drilled hole until the flange is firmly against the mounting surface. 2. Pass machine screw through part to be fastened and tighten until snug.

Click for combined categories: All Nuts


Dental Handpiece Parts

Hide Pictures

Go to Top  


EM3000 Nose Cone C. De Giorgi Parts

EM3000 Nose Cone C. De Giorgi Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Linear Slides

Hide Pictures

Go to Top  


Linear - Mini Rail - Self-Lubricating - Carriage

Linear - Mini Rail - Self-Lubricating - Carriage

Additional carriages for the Mini-Rail system. Match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.

Click for combined categories: All Drawer Slides


Linear Slides - Cross Roller Tables - Aluminium

Linear Slides - Cross Roller Tables - Aluminium

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Linear Slides - Cross Roller Tables - Steel

Linear Slides - Cross Roller Tables - Steel

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Bearings Tapered Roller

Hide Pictures

Go to Top  


Bearings - Tapered Roller - Single Row - Metric

Bearings - Tapered Roller - Single Row - Metric

Includes cup and cone


Shaftloc

Hide Pictures

Go to Top  


Shaftloc-tm Sleeves - Single Ended

Shaftloc-tm Sleeves - Single Ended

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Click for combined categories: All Shaftloc


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Reli-a-flex - Long Series - Clamp Type

Couplings - Reli-a-flex - Long Series - Clamp Type

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings - Reli-a-flex - Short Series - Clamp Type

Couplings - Reli-a-flex - Short Series - Clamp Type

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings - Reli-a-flex - Short Series - Set Screw Type

Couplings - Reli-a-flex - Short Series - Set Screw Type

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Bearings Automotive

Hide Pictures

Go to Top  


Bearings - Tapered Roller - Single Row - Inch Sets

Bearings - Tapered Roller - Single Row - Inch Sets

Common automotive sets include cup and cone


Bearings Acetal

Hide Pictures

Go to Top  


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Click for combined categories: All Plastic Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Click for combined categories: All Plastic Bearings

Click for combined categories: All Plastic Single Row Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Click for combined categories: All Plastic Bearings

Click for combined categories: All Plastic Single Row Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Special Types

Bearings - Acetal - Special Types

Light duty acetal bearings used for drawer runners, light duty tracks and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

Click for combined categories: All Plastic Bearings


Bearings - Acetal - with Glass Balls

Bearings - Acetal - with Glass Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Click for combined categories: All Plastic Bearings

Click for combined categories: All Plastic Single Row Bearings

Related Information:
Acetal Bearings with 316 Stainless Steel Balls

Acetal Properties


Bearings Automotive

Hide Pictures

Go to Top  


Bearings - Automotive - Trailer Wheel - Kits

Bearings - Automotive - Trailer Wheel - Kits

Front and rear wheel bearing and seal kits for popular box trailers, boat trailers and caravans


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - 316 Stainless Steel - Single Row

Bearings - Ball - 316 Stainless Steel - Single Row

Food and Medical grade Stainless Steel - Non Hardenable.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.0762 mm / -0.000 mm OD +0.000 mm / -0.0762 mm Width +/- 0.127 mm. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races.

Click for combined categories: All 300 Grade Stainless Bearings


Bearings - Ball - 440C Stainless

Bearings - Ball - 440C Stainless

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - 4 Point Contact

Bearings - Ball - 4 Point Contact

4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Bearings - Ball - Angular Contact - Chrome Steel

Bearings - Ball - Angular Contact - Chrome Steel

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Click for combined categories: All Angular Contact Bearings


Bearings - Ball - Chrome Steel

Bearings - Ball - Chrome Steel

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - Double Row - Angular Contact

Bearings - Ball - Double Row - Angular Contact

Double Row Ball Bearings - Angular Contact.


Click for combined categories: All Double Row Ball Bearings


Bearings - Ball - Double Row - Self Aligning - Parallel Bore

Bearings - Ball - Double Row - Self Aligning - Parallel Bore


Click for combined categories: All Double Row Ball Bearings

Click for combined categories: All Self Aligning Ball Bearings


Bearings - Ball - Economy - 440C Stainless

Bearings - Ball - Economy - 440C Stainless

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Economy - Chrome Steel

Bearings - Ball - Economy - Chrome Steel

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Flanged - 440C Stainless

Bearings - Ball - Flanged - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - Chrome Steel

Bearings - Ball - Flanged - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - High Precision - 440C Stainless

Bearings - Ball - Flanged - High Precision - 440C Stainless

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - Flanged - WIR - 440C Stainless

Bearings - Ball - Flanged - WIR - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - Flanged - WIR - Chrome Steel

Bearings - Ball - Flanged - WIR - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - High Precision - 440C Stainless

Bearings - Ball - High Precision - 440C Stainless

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - High Precision - Chrome Steel

Bearings - Ball - High Precision - Chrome Steel

Chrome Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - High Speed Cage

Bearings - Ball - High Speed Cage

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Click for combined categories: All Radial Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - WIR - 440C Stainless

Bearings - Ball - WIR - 440C Stainless

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - WIR - Chrome Steel

Bearings - Ball - WIR - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - WIR - High Precision - 440C Stainless

Bearings - Ball - WIR - High Precision - 440C Stainless

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - With Snap Ring - Chrome Steel

Bearings - Ball - With Snap Ring - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Bearings - Gothic Groove Profile OD

Bearings - Gothic Groove Profile OD

Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Bearings - Radial - Semi-Ground - Sealed

Bearings - Radial - Semi-Ground - Sealed

This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Click for combined categories: All Radial Ball Bearings


Bearings - Radial - Semi-Ground - Shielded

Bearings - Radial - Semi-Ground - Shielded

This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Click for combined categories: All Radial Ball Bearings


Bearings Conveyor

Hide Pictures

Go to Top  


Bearings - Conveyor - Hex Bore - Plastic - Single Row

Bearings - Conveyor - Hex Bore - Plastic - Single Row

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.

Click for combined categories: All Conveyor Bearings


Bearings for Housings

Hide Pictures

Go to Top  


Bearings - 316 Stainless Steel - For Plastic Housings

Bearings - 316 Stainless Steel - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - Acetal - Solid - For Plastic Housings

Bearings - Acetal - Solid - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - Acetal with Stainless Balls - For Plastic Housings

Bearings - Acetal with Stainless Balls - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - For Cast Iron Housings

Bearings - For Cast Iron Housings

Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - For Pressed Metal Housings

Bearings - For Pressed Metal Housings

Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.

Related Information:
Three Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings for Wheelbarrows

Hide Pictures

Go to Top  


Bearings - Unground

Bearings - Unground

Unground bearings used in trolleys, prams and wheel barrow wheels


Bearings Grooved Profile

Hide Pictures

Go to Top  


Bearings - U Groove Profile OD

Bearings - U Groove Profile OD

Special OD Bearings.

Contact us for tolerances.

Click for combined categories: All U Groove Bearings and Pulleys


Bearings - V Groove Profile OD

Bearings - V Groove Profile OD

Special OD Bearings.

Related Information:
Precision Shafting To Suit Bearings


Bearings Hydrodynamic

Hide Pictures

Go to Top  


Bearings - Hydrodynamic Pressure

Bearings - Hydrodynamic Pressure

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Bearings Mounted

Hide Pictures

Go to Top  


Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Click for combined categories: All Press In Bearings


Bearings - SDP - Needle Roller - Flange Mounted - Self Aligning

Bearings - SDP - Needle Roller - Flange Mounted - Self Aligning

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Steel black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Self aligning to +/- 5o.

Click for combined categories: All Press In Bearings


Bearings - SDP - PTFE Bronze - Flange Mount - Non Aligning

Bearings - SDP - PTFE Bronze - Flange Mount - Non Aligning


Click for combined categories: All Press In Bearings


Bearings - SDP - PTFE Bronze - Flange Mount - Self Aligning

Bearings - SDP - PTFE Bronze - Flange Mount - Self Aligning

Self aligning to 5o on installation


Click for combined categories: All Press In Bearings


Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Bearings - SDP - PTFE Filled Acetal - Flange Mounted

Retainer : Carbon Steel Black Oxide Finish. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Self lubricating. Use any shaft material with 0.4 um or finer finish. Soft or hard shafting is OK.

Click for combined categories: All Press In Bearings


Bearings - Spyraflo - Press-Fit - Self Aligning

Bearings - Spyraflo - Press-Fit - Self Aligning

Needle roller, bronze and acetal bearings in specially designed press fit retainers

See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo


Bearings - Spyraflo - Self Clinching - Non Aligning

Bearings - Spyraflo - Self Clinching - Non Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Bearings - Spyraflo - Self Clinching - Self Aligning

Bearings - Spyraflo - Self Clinching - Self Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Bearings Needle Roller

Hide Pictures

Go to Top  


Bearings - Needle Roller - Cage Type

Bearings - Needle Roller - Cage Type

Cage and Rollers.


Bearings - Needle Roller - Inner Rings

Bearings - Needle Roller - Inner Rings

Hardened sleeves for needle roller bearings.


Bearings - Needle Roller - Machined - With Inner Ring

Bearings - Needle Roller - Machined - With Inner Ring


Bearings - Needle Roller - Machined - Without Inner Ring

Bearings - Needle Roller - Machined - Without Inner Ring


Bearings - Needle Roller - Shell Type

Bearings - Needle Roller - Shell Type

Light Weight. Compact Design.

Bearings Pivot

Hide Pictures

Go to Top  


Bearings - Pivot - Flanged

Bearings - Pivot - Flanged


Click for combined categories: All Pivot Bearings


Bearings - Pivot - With Inner Ring

Bearings - Pivot - With Inner Ring

Note! Minimum quantities apply to production of these items.

Click for combined categories: All Pivot Bearings


Bearings - Pivot - Without Inner Ring

Bearings - Pivot - Without Inner Ring

Note! Minimum quantities apply to production of these items.

Click for combined categories: All Pivot Bearings


Bearings Press In

Hide Pictures

Go to Top  


Bearings - Press-Fit - Acetal-PTFE - SDP - Carbon Steel Retainer

Bearings - Press-Fit - Acetal-PTFE - SDP - Carbon Steel Retainer

Bearing material PTFE filled acetal, Retainer material carbon steel black oxide finish or 300 series stainless steel.

Self-Clinching, Self alligning up to +/- 5o, Self Lubricating.

Click for combined categories: All Press In Bearings


Bearings - Press-Fit - Acetal-PTFE - SDP - Stainless Steel Retainer

Bearings - Press-Fit - Acetal-PTFE - SDP - Stainless Steel Retainer

Metric does not have oring grooves.

Operating temperature -15o to 90o Celius. Anodized Aluminum Body, Polymer J Bearing material. Features include - Self-lubricating, Corrosion and dirt resistant, maintenance free and Vibration dampening.

Click for combined categories: All Press In Bearings


Bearings - Press-Fit - Acetal - SDP

Bearings - Press-Fit - Acetal - SDP

Press fit installation. Do not press bearing against insert. Bearing : PTFE Filled Acetal Self Lubricating / -40 to 150 oC. Carbon steel outer. Self aligning to +/- 5o. Use any shaft material with 0.4 um or finer finish.

Click for combined categories: All Press In Bearings


Bearings - Press-Fit - Needle Roller - SDP - Non Aligning - Self Clinching

Bearings - Press-Fit - Needle Roller - SDP - Non Aligning - Self Clinching

Knurled edge clinches into softer materials.

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer.

Click for combined categories: All Press In Bearings


Bearings - Press-Fit - Needle Roller - SDP - Self Aligning - Self Clinching

Bearings - Press-Fit - Needle Roller - SDP - Self Aligning - Self Clinching

Self aligning to 5o. Knurled edge clinches into softer materials.

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Self aligning +/- 5 Degress. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer.

Click for combined categories: All Press In Bearings


Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP

Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.

Click for combined categories: All Press In Bearings


Bearings - Press-Fit - Sintered Bronze - SDP

Bearings - Press-Fit - Sintered Bronze - SDP

Self lubricating. -28 to +95 oC. Use any shaft material with 0.8 um or finer finish. Self aligning +/- 5 Degress.

Click for combined categories: All Press In Bearings


Bearings Scale

Hide Pictures

Go to Top  


Bearings - Precision Scale

Bearings - Precision Scale

Bearings for scales.

Note! Minimum quantities apply to production of these items.

Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Banded

Bearings - Thrust - Ball - Banded

3 Piece Thrust Bearings Banded Type


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Cage and Balls Only - Chrome Steel

Bearings - Thrust - Ball - Cage and Balls Only - Chrome Steel

Match with thrust washers of the same bore and OD.


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel

Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel

Match with thrust washers of the same bore and OD.


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Washers Only - Chrome Steel

Bearings - Thrust - Ball - Washers Only - Chrome Steel

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Roller - Cage and Rollers Only

Bearings - Thrust - Roller - Cage and Rollers Only

Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Roller - Washers

Bearings - Thrust - Roller - Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings Turbine

Hide Pictures

Go to Top  


Bearings  - Model Jet Turbine

Bearings - Model Jet Turbine

Bearings developed specifically for use in Model Jet turbines.

These bearings are designed for high speeds usually between 80,000 and 120,000 RPM in short runs. Speeds over 120,000 are often obtainable. Testing is required. High Temperature up to 300o Celsius. Bearing Type R in the tables indicates Radial (refer our main bearings category).


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155121 products in 3615 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.