About Us Brands Contact FAQ Freight Payments Products Search Site Technical More Links...

Small Parts and Bearings
Orings For Dental Applications (Full Range)


Bearings for Dental Equipment

TopHide Pictures

Bearings - Dental Applications
Bearings - Dental Applications

Match Strength: 95%

See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.


O-Rings for Dental Applications

TopHide Pictures

O-Rings - Dental
O-Rings - Dental

Match Strength: 95%

Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:
Dental Bearings

Dental Bearing Kits

TopHide Pictures

Bearings and Oring kits for Dental Handpieces
Bearings and Oring kits for Dental Handpieces

Match Strength: 48%

Kits of Bearings - Orings - and Washers.

Related Information:
Dental Parts - Miscellaneous

Bumpers

TopHide Pictures

Bumpers - Conical
Bumpers - Conical

Match Strength: 47%

Also see combined categories:
All Bumpers

Anti vibration application for machinery.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Hygienic - Anchoring - One Hole
Mounts - Leveling - Hygienic - Anchoring - One Hole

Match Strength: 47%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Mounts - Leveling - Hygienic - Anchoring - Two Hole
Mounts - Leveling - Hygienic - Anchoring - Two Hole

Match Strength: 47%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.


Channel

TopHide Pictures

Channel - Brass
Channel - Brass

Match Strength: 47%

For general hobby applications.


Latches

TopHide Pictures

Latches - Hidden Panel
Latches - Hidden Panel

Match Strength: 46%

For near edge applications. Provides clean, unblemished panel surfaces. Push the panel to latch. Floating keeper option includes U-bent washer to assist alignment of hinged panels.

Stud of floating keeper will float 4mm of total movement. Steel latch with stainless steel spring and white thermoplastic actuator button.


Gearmotors Open

TopHide Pictures

Gearmotors - Open Gear
Gearmotors - Open Gear

Match Strength: 46%

Also see combined categories:
All DC Permanent Magnet Gearmotors

Perfect for applications where inspection of the gears is important, educational purposes or for visual effects.


Spring Reels

TopHide Pictures

Reels - Spring Powered - Bracket Mounted
Reels - Spring Powered - Bracket Mounted

Match Strength: 46%

Also see combined categories:
All Reels

Applications: Counterbalances, door closers, cable retractors. Applications: Hose retreivers, tool head returns, cabinets and furniture.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel

Match Strength: 46%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.


Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel

Match Strength: 46%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications.

Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.


Nuts

TopHide Pictures

Nuts - Square - Machine Screw
Nuts - Square - Machine Screw

Match Strength: 46%

For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards


Strip

TopHide Pictures

Strip - Soft Metal Packs
Strip - Soft Metal Packs

Match Strength: 46%

For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Tools Bending

TopHide Pictures

Tools - Wire Working
Tools - Wire Working

Match Strength: 46%

Also see combined categories:
All Tools

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.


Balls

TopHide Pictures

Balls - Plastic - Polypropylene
Balls - Plastic - Polypropylene

Match Strength: 46%

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

Excellent for liquid level float applications.

Tolerance and spherecity: up to and including 25.4mm diameter = +/-0.0508mm, over 25.4mm diameter +/-0.0762mm. Very resistant to most acids and alkalies. Excellent for liquid level float applications. Unpolished. Specific Gravity: 0.91.

Related Information:
Other Types of Balls

Castors

TopHide Pictures

Castors - Bolt - Utility
Castors - Bolt - Utility

Match Strength: 46%

Also see combined categories:
All Castors

Swivel Castors for light duty applications including wire baskets, display equipment and light trolley applications.


Clips

TopHide Pictures

Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Match Strength: 46%

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings.

Applications include gear systems, securing needle bearings and to act as spacers.


Latches

TopHide Pictures

Latches - Adjustable
Latches - Adjustable

Match Strength: 46%

These latches can be used in applications where variances occur. Zinc plated steel. Keepers need to be ordered separately. Either keeper can be used with either of the listed latches.


Latches - Swell
Latches - Swell

Match Strength: 46%

Latches in any frame thickness, blind application, glass or plastic. Latches accommodate misalignment between door and frame.

Black nylon handle and nut. Black rubber bushing provides sound deadening effect. When handle is lifted bushing diameter decreases allowing it to pass through the hole in the frame to unlatch the door.


Spacers

TopHide Pictures

Spacers - Round - Hobby
Spacers - Round - Hobby

Match Strength: 46%

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Inexpensive nylon spacers for hobby applications


Lifting Chain

TopHide Pictures

Chain - Grade 70 - Transport
Chain - Grade 70 - Transport

Match Strength: 46%

Also see combined categories:
All Link Chain

For load binding applications, tie-downs, towing and logging. Not for lifting.

Strength to lb ratio exceed that of Proof Coil and High Test. Meets US department of transport regulations. High strength heat treated steel with a peer finish.


Linear Slides

TopHide Pictures

Rail Systems - Miniature Profile
Rail Systems - Miniature Profile

Match Strength: 46%

Also see combined categories:
All Linear Slides

Ideal for precision applications where mounting space is limited

Gothic arch grooves at raceway contacts enables slide to sustain loads & movement from any direction. Made from stainless steel or plastic for corrosion resistance. End caps have oil holes for easy relubrication.


Gearmotors

TopHide Pictures

Solarbotics Gearmotors
Solarbotics Gearmotors

Match Strength: 46%

Also see combined categories:
All Solarbotics

Hobby gearmotors for all types of applications


Bumpers

TopHide Pictures

Bumpers - Radial - Tube
Bumpers - Radial - Tube

Match Strength: 46%

Also see combined categories:
All Bumpers

These bumpers are designed for applications involving shock and collision protection along a straight line.

Made from TecsPaks patented elastomer. Less than 40D hardness. Mounting bolt not included.


Latches

TopHide Pictures

Latches - Tension - Versa Latch - Steel
Latches - Tension - Versa Latch - Steel

Match Strength: 45%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Zinc plated carbon steel with bright chromate dip.

Keepers sold separately - see linked category.


Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Aluminium
Rod - Round - Aluminium

Match Strength: 45%

Also see combined categories:
All Metal Rod

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Rod - Round - Brass
Rod - Round - Brass

Match Strength: 45%

Also see combined categories:
All Metal Rod

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Sheet

TopHide Pictures

Sheet - Aluminium
Sheet - Aluminium

Match Strength: 45%

Also see combined categories:
All Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


Mounts Machinery

TopHide Pictures

Mounts - Machinery - Iindustrial - Pneumatic Elastomeric
Mounts - Machinery - Iindustrial - Pneumatic Elastomeric

Match Strength: 45%

Also see combined categories:
All Industrial Machine Mounts

Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.

Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.


Castors

TopHide Pictures

Castors - Plate - Utility
Castors - Plate - Utility

Match Strength: 45%

Also see combined categories:
All Plated Castors

Swivel and Rigid Castors for Light duty applications. Plate mounted type.


Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Stainless Steel
Rod - Round - Stainless Steel

Match Strength: 45%

Also see combined categories:
All Metal Rod

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.


Tube and Tubing

TopHide Pictures

Tube - Round - Soft Metal Packs
Tube - Round - Soft Metal Packs

Match Strength: 45%

Also see combined categories:
All Metal Tube

For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Robotic Wheels

TopHide Pictures

Wheels - Robotic - Motorised
Wheels - Robotic - Motorised

Match Strength: 45%

Also see combined categories:
All Wheels

Motorised wheels for robotic and other applications

See also tracks for robotic applications.


Universal Joints

TopHide Pictures

Universal Joints - Telescoping - Slow Speed - Steel
Universal Joints - Telescoping - Slow Speed - Steel

Match Strength: 45%

Also see combined categories:
All Universal Joints

For hand operated applications.

Steel 9SMn Pb36K. Hand motion only. Unhardened Pins.


Tools Circlip

TopHide Pictures

Tools - E-Clip Applicators
Tools - E-Clip Applicators

Match Strength: 45%

Also see combined categories:
All Circlip Tools
All Tools

Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only.


Mounts Leveling

TopHide Pictures

Mounts - Leveling - Thermoplastic
Mounts - Leveling - Thermoplastic

Match Strength: 45%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Economical choice for a wide range of applications.

Base is made from reinforced thermoplastic. Threaded stem is steel. Optional non skid rubber pads available separately.


Spring Mounts

TopHide Pictures

Springs - Urethane
Springs - Urethane

Match Strength: 45%

Also see combined categories:
All Rubber Springs

Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.

They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 oC.


Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Stainless - Precision
Ball Transfer Units - Screw Stem - Stainless - Precision

Match Strength: 45%

Also see combined categories:
All Ball Castors and Transfers
All Screw Fit Ball Transfers

For conveying materials.

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Match Strength: 45%

Also see combined categories:
All Ball Castors and Transfers
All Screw Fit Ball Transfers

For conveying materials.

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Rollers

TopHide Pictures

Rollers - Nylon - Intech Power-Core
Rollers - Nylon - Intech Power-Core

Match Strength: 45%

Also see combined categories:
All Tyred OD Bearings
All Rollers

Nylon tyred rollers for heavy duty applications


Knobs Knurled

TopHide Pictures

Knobs - Knurled - Clean Line
Knobs - Knurled - Clean Line

Match Strength: 45%

Also see combined categories:
All Knurled Knobs
All Knobs

This knob has been designed for application on medical and hospital equipment and on food processing machines whose parts must be frequently cleaned for hygienic purposes. Its shape is compact with no cavites, avoiding un-healthy residues depoists. AISI 303 stainless steel insert with tapped through hole. Painted Duroplast, in white similar to RAL 9002 with bright finish.


Hinges

TopHide Pictures

Hinges - Flexi-Hinge - Precision
Hinges - Flexi-Hinge - Precision

Match Strength: 45%

Also see combined categories:
All Hinges

Double and Single Ended - Limited Angle Rotary Applications.

Zero Backlash. Constant Spring Rate. No lubrication required. Self centering on removal of load. -53 to +176 Deg. Celsius operating temperature.


Engineering and Hobby Rod

TopHide Pictures

Rod - Round - Soft Metal Packs
Rod - Round - Soft Metal Packs

Match Strength: 45%

Also see combined categories:
All Metal Rod

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.


Tube and Tubing

TopHide Pictures

Tube - Round - Aluminium
Tube - Round - Aluminium

Match Strength: 45%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Aluminium Properties

Tube - Round - Brass
Tube - Round - Brass

Match Strength: 45%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Brass Properties

Tube - Round - Copper
Tube - Round - Copper

Match Strength: 45%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Tube - Square - Aluminium
Tube - Square - Aluminium

Match Strength: 45%

Also see combined categories:
All Metal Tube

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Tube - Square - Brass
Tube - Square - Brass

Match Strength: 45%

Also see combined categories:
All Metal Tube

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.


Gearboxes Inline

TopHide Pictures

Gearboxes - Inline - 114 x 90mm
Gearboxes - Inline - 114 x  90mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NT121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 120 x 103mm
Gearboxes - Inline - 120 x 103mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NTB121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 1.63/3.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 120 x 120mm
Gearboxes - Inline - 120 x 120mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NT122 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 120 x 160mm
Gearboxes - Inline - 120 x 160mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NTB122 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 4/5kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 30mm
Gearboxes - Inline -  50 x  30mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

J51 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: J51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 40mm
Gearboxes - Inline -  50 x  40mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

J52 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 50mm
Gearboxes - Inline -  50 x  50mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

J53 Series.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 60 x 56mm
Gearboxes - Inline -  60 x  56mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NT61 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 60 x 70mm
Gearboxes - Inline -  60 x  70mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NT62 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 60 x 84mm
Gearboxes - Inline -  60 x  84mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NT63 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 63 x 40mm
Gearboxes - Inline -  63 x  40mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

J64 Series.

End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 63 x 50mm
Gearboxes - Inline -  63 x  50mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

J65 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 63 x 60mm
Gearboxes - Inline -  63 x  60mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

J66 Series.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 90 x 74mm
Gearboxes - Inline -  90 x  74mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NT91 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 90 x 94mm
Gearboxes - Inline -  90 x  94mm

Match Strength: 45%

Also see combined categories:
All Inline Gearboxes

NT92 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Ball Transfers

TopHide Pictures

Ball Transfer Units - Screw Stem - Brass and Aluminium
Ball Transfer Units - Screw Stem - Brass and Aluminium

Match Strength: 44%

Also see combined categories:
All Ball Castors and Transfers
All Screw Fit Ball Transfers

For conveying materials.

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms.


Bearings Ball

TopHide Pictures

Bearings - Ball - High Speed Cage
Bearings - Ball - High Speed Cage

Match Strength: 44%

Also see combined categories:
All Radial Ball Bearings

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Related Information:
Skating and Fishing FAQ

Ceramic Bearings

TopHide Pictures

Bearings - Ceramic Si3N4 - Radial
Bearings - Ceramic Si3N4 - Radial

Match Strength: 44%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.


Bearings - Ceramic ZrO2 - Radial
Bearings - Ceramic ZrO2 - Radial

Match Strength: 44%

Also see combined categories:
All Radial Ball Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.


Latches

TopHide Pictures

Latches - Tension - Versa Latch - 300 Grade Stainless Steel
Latches - Tension - Versa Latch - 300 Grade Stainless Steel

Match Strength: 44%

Torsion springs compensate for application irregularities. Easy to grasp handle design. Passivated type 300 grade stainless steel.

Keepers sold separately - see linked category.


Plungers Indexing

TopHide Pictures

Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Match Strength: 44%

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.


Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Match Strength: 44%

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.


Bearings Linear

TopHide Pictures

Bearings - Linear - Sliding - Ceramic Coated
Bearings - Linear - Sliding - Ceramic Coated

Match Strength: 44%

Also see combined categories:
All Linear Ball Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.


Tube and Tubing

TopHide Pictures

Tube - Round - Stainless Steel
Tube - Round - Stainless Steel

Match Strength: 44%

Also see combined categories:
All Metal Tube

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:
Stainless Steel Properties

Hobby Servo Motors

TopHide Pictures

Servo Motor - Brackets
Servo Motor - Brackets

Match Strength: 44%

Also see combined categories:
All Hobby Servo Motors

Brackets to suit servo motors for robotic applications


Handpiece Parts

TopHide Pictures

Dental Handpiece Parts - Other
Dental Handpiece Parts - Other

Match Strength: 44%

A list of additional parts available for handpieces. Also see category Dental Handpiece Parts.

This category contains miscellaneous dental parts excluding tools, bearings and o-rings. Parts for specific handpiece models can be found under the brand name on the internet store main index.

Related Information:
Dental Bearings

Bearings One Way Clutch

TopHide Pictures

Bearings - One Way - Sprag - BR
Bearings - One Way - Sprag - BR

Match Strength: 44%

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

BR series cam clutches are designed to lift off and lose contact with the inner race when it over-runs. BR series are suitable for Overrunning-high speed inner race/low speed engaged outer race or Back stopping-high speed inner race overrunning. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.


Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Match Strength: 44%

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.


Bearings - One Way - Sprag - TFS
Bearings - One Way - Sprag - TFS

Match Strength: 44%

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

TFS Type has the outer race designed for press fit installation to housing. Correct interference dimesnsions of outer race must be maintained to obtain maximum performance. Internal diameter of housing should meet H7 tolerance. Make sure housing has enough strength to withstand pressure for press fitting. When installing, mount it with a type 62 bearing to avoid radial force. Mount clutch ensuring that the shaft driving directions is in the direction indicated by arrow on cover plates. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.


Ceramic Bearings

TopHide Pictures

Bearings - Ceramic Si3N4 - Angular Contact
Bearings - Ceramic Si3N4 - Angular Contact

Match Strength: 44%

Also see combined categories:
All Angular Contact Bearings
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.

Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.


Plungers Ball

TopHide Pictures

Plungers - Ball - Threaded - Acetal Body and Nylon Ball
Plungers - Ball - Threaded - Acetal Body and Nylon Ball

Match Strength: 44%

Also see combined categories:
All Threaded Ball Plungers

For use in plastic applications or when the application requires as few metal parts as possible.

Electrical isolation. Highly durable acetal body with stainless steel spring allows use in corrosive environments. Plunger wrenches will not work with these.


Gearboxes Inline

TopHide Pictures

Gearboxes - Inline - 27 x 45mm
Gearboxes - Inline -  27 x  45mm

Match Strength: 44%

Also see combined categories:
All Inline Gearboxes

J27 Series. Miniature gearbox.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 60g. Backlash: Depends on ratio. Hours Life: 12000 hr. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Gearboxes - Inline - 50 x 40mm Hi Torque
Gearboxes - Inline -  50 x  40mm Hi Torque

Match Strength: 44%

Also see combined categories:
All Inline Gearboxes

JHD51 Series.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: JHD51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:
Inexpensive Gearmotor Kits

Shafting General Purpose

TopHide Pictures

Shafting - Mild Steel
Shafting - Mild Steel

Match Strength: 44%

Also see combined categories:
All Shafting
All Steel Shafting

Great axles for low load and low precision applications like trolleys, carts and wheelbarrows.

Related Information:
Shaft Extenders

Mounts Leveling

TopHide Pictures

Mounts - Leveling - Padded - Light Duty - With Elastomer Pads
Mounts - Leveling - Padded - Light Duty - With Elastomer Pads

Match Strength: 44%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc.

For non skid applications.


Mounts - Leveling - Padded - Light Duty - With Nylon Pads
Mounts - Leveling - Padded - Light Duty - With Nylon Pads

Match Strength: 44%

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc.

For glide applications.


Ball Transfers

TopHide Pictures

Ball Transfer Units - Threaded Body
Ball Transfer Units - Threaded Body

Match Strength: 44%

Also see combined categories:
All Ball Castors and Transfers
All Screw Fit Ball Transfers

For conveying materials.

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. Minimum order currently 500 pieces.


Pressure Rollers

TopHide Pictures

Bearings - Pressure Roller - With Urethane OD
Bearings - Pressure Roller - With Urethane OD

Match Strength: 44%

Also see combined categories:
All Tyred OD Bearings

Bearings with Urethane Tyre on OD for applications requiring frictional movement.

For applications including paper and card dispensing and rolling (eg ATM Machines).


Lifting Chain

TopHide Pictures

Chain - Grade 30 Proof Coil
Chain - Grade 30 Proof Coil

Match Strength: 44%

Also see combined categories:
All Link Chain

General utility chain for farm, industrial and home applications such as cargo lashing, pipeline hanging, tailgate, guardrail, tow and switch chain. Not for lifting.

Made from low carbon steel with a self coloured zinc and hot galvanised finished.


Chain - Grade 50 Lifting - 316L Stainless Steel
Chain - Grade 50 Lifting - 316L Stainless Steel

Match Strength: 44%

Also see combined categories:
All Lifing Chain

Commonly used for commercial and marine applications. Approved for lifting.

Working loads are based on gradual pull not shock loads. Ensure all components in your assembly are overhead lifting rated and have the same working loads.


Bearings Ball

TopHide Pictures

Bearings - Gothic Groove Profile OD
Bearings - Gothic Groove Profile OD

Match Strength: 43%

Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.


Bearings One Way Clutch

TopHide Pictures

Bearings - One Way - Sprag - TSS - Heavy Duty
Bearings - One Way - Sprag - TSS - Heavy Duty

Match Strength: 43%

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

TSS Type is designed for press fit installation. Correct interference dimesnsions of outer race must be maintained to obtain maximum performance. Internal diameter of housing should meet H7 tolerance. Make sure housing has enough strength to withstand pressure for press fitting. When installing, mount it with a type 62 bearing to avoid radial force. Mount clutch ensuring that the shaft driving directions is in the direction indicated by arrow on cover plates. Keyway on inner ring. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.


Ceramic Bearings

TopHide Pictures

Bearings - Ceramic ZrO2 - Self Aligning - Double Row
Bearings - Ceramic ZrO2 - Self Aligning - Double Row

Match Strength: 43%

Also see combined categories:
All Full Ceramic Bearings

Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.

Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 oC with PTFE Cage and 130 Deg C with Nylon Cage.


Clamps

TopHide Pictures

Clamps - Timing Belt
Clamps - Timing Belt

Match Strength: 43%

Used for locking the ends of timing belt lengths used in reciprocating applications

Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.


Lifting Chain

TopHide Pictures

Chain - Grade 40 High Test - 316L Stainless Steel
Chain - Grade 40 High Test - 316L Stainless Steel

Match Strength: 43%

Also see combined categories:
All Link Chain

Commonly used for commercial and marine applications. Not for lifting.


Tooling Balls

TopHide Pictures

Balls - Inspection
Balls - Inspection

Match Strength: 43%

Also see combined categories:
All Fixture and Checking Balls

Premium short shank inspection balls are used as reference points for inspection applications in conjunction with coordinate measuring machines to accurately measure the workpiece.

Made from case hardened 8620 steel. Concentricity of ball to shank is 0.00254mm (0.0001 in.) TIR.


Clamps

TopHide Pictures

Clamp Kits - Timing Belt
Clamp Kits - Timing Belt

Match Strength: 43%

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.


Bearings Linear

TopHide Pictures

Bearings - Linear - Ball - Adjustable
Bearings - Linear - Ball - Adjustable

Match Strength: 43%

Also see combined categories:
All Linear Ball Bearings

Adjustable type allows you to vary the preload according to your application

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.


Housings - Linear with Bearings

TopHide Pictures

Housings - Linear - Pillow Block - Closed - Ceramic Coated
Housings - Linear - Pillow Block - Closed - Ceramic Coated

Match Strength: 43%

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.


Timing Belts and Pulleys 1.0mm

TopHide Pictures

Pulleys - Timing - 1.000mm Pitch - STOCK - Aluminium
Pulleys - Timing -  1.000mm Pitch - STOCK - Aluminium

Match Strength: 43%

Also see combined categories:
All 1mm Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

For easy ready selected sets of timing belts and pulleys please see the HES website.


Bearings Ball

TopHide Pictures

Bearings - Ball - High Precision - 440C Stainless
Bearings - Ball - High Precision - 440C Stainless

Match Strength: 43%

Also see combined categories:
All Radial Ball Bearings
All Basic Single Row Bearings Stainless and Chrome

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Related Information:
Skating and Fishing FAQ


Show all items starting with
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   1   2   3   4   5   6   7   8   9  





Other Store Pages

Click Page Banner Below

Top

Main Pages

Click Page Banner Below

Top





Top



PRODUCTS

Accessories Actuators Adhesives Adjusters Air Springs Airmovers Allthread Angle Assortments Backup Rings Ball Joints Ball Parallels Ball Screws Ball Splines Linear Ball Transfers Balls Balsa Bar Bases Batteries Bearings Acetal Bearings Angular C... Bearings Automotive Bearings Ball Bearings Conveyor Bearings Crossed R... Bearings Grooved P... Bearings Housings Bearings Hydrodynamic Bearings Linear Bearings Mounted Bearings Needle Ro... Bearings One Way C... Bearings PEEK Bearings Pivot Bearings Plates Bearings Press In Bearings Scale

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Bearings Tapered R... Bearings Thrust Bearings Turbine Bearings and Housi... Bearings for Denta... Bearings for Housings Bearings for Skating Bearings for Wheel... Belts Flat Belts Rounthane Belts and Pulleys ... Blow Guns Bolts Books Bottles and Cans Brakes Brushless Motor Be... Bumpers Bungs Bushes Bronze Bushes Plastic Bushes Steel Bushings Spherical Buzzers Cable Cable Ties Cam Followers Cams Capacitors Carburettor Parts Carousels Cases Castors Catches Ceramic Bearings Chain and Sprocket... Chain and Sprocket... Channel Chips Circlips

Visa Card Accepted
Visa
Secure Checkout


Clamping Bushings Clamping Rings Clamps Cleaning Products Clevis Joints Clips Cloth Clutches Collars Couplings Bellows Couplings Helical ... Couplings Insert a... Couplings Magnetic Couplings Other Couplings Rigid Cranks and Wheels Cross Blocks Dampers Dental Bearing Kits Dental Handpiece P... Dials Differentials Drylin Bearings an... Dual Eye Joints Dual Vee Bearings Dubro Accessories Educational Projects Enclosures Engineering Sets Engineering and Ho... Epoxies Eyebolts Fasteners General Fastening Bushings Fishing Reel Parts Fittings Flexible Shaft Foam Food Processor Parts Framing

Master Card Accepted
Mastercard
Secure Checkout


Gadgets Games Amusement Games General Gas Springs Gear Blanks Gear Joining Gauges Gear Racks Circula... Gear Racks Flexible Gearbox Output Shafts Gearbox Parts Gearboxes BuOrd Gearboxes Cross Axis Gearboxes Educatio... Gearboxes Inline Gearboxes Inline E... Gearboxes Offset Gearboxes Power Gearboxes Right Angle Gearboxes Tee Gearheads BuOrd Gearheads Inline Gearheads MAX Gearheads Right Angle Gearmotors Gearmotors AC Gearmotors Basic Gearmotors DC Gearmotors DC Perm... Gearmotors Open Gears Cluster Gears Imperial Ant... Gears Imperial Bevel Gears Imperial Hel... Gears Imperial Int... Gears Imperial Mitre Gears Imperial Racks Gears Imperial Spur Gears Imperial Worms Gears Metric AntiB... Gears Metric Bevel

Pay By
Phone after Checkout
07 3245 7977
International +61 7 3245 7977


Gears Metric Helical Gears Metric Internal Gears Metric Mitre Gears Metric Racks Gears Metric Spira... Gears Metric Spira... Gears Metric Spur Gears Metric Stem Gears Metric Worms Handles Handpiece Parts Hinges Hobby Gears Hobby Servo Motors Hobby Shafting Hobby Wheels Hoist Rings Hooks Housings Linear w... Housings Linear w... Housings to Suit B... Housings with Inte... Hubs ISOPADS Indexing Insulators Isolators Isomounts Jackmounts Jigsaws Keys Keys and Keysteel Kites Knob Kits Knobs Ball Knobs Cabinet Knobs Cross Knobs Knurled Knobs Lever Knobs Lobe

Amex Accepted
Amex
Secure Checkout


Knobs Lock Knobs Mushroom Knobs Oval Knobs Pointer Knobs Precision Knobs Push Pull Knobs Round Knobs Soft Knobs Star Knobs Thumb Knobs Tri Knobs Valve Knobs Wing Lanyards Latches Lazy Susans Leads and Connectors Leadscrew Actuators Leadscrews Levers Lifting Chain Linear Slides Locking Assemblies Locking Bushings Locking Compounds Locks Lubricants General... Magnets Alcomax Magnets Alnico Magnets Ceramic Magnets Cup Magnets Ferrite Magnets Rare Earth Magnets Rubber and... Marking Measuring Equipment Measuring Gauges Medical Model Jet Turbine ... Modelling Materials

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Motor Drives Stepper Motors DC Motors DC MAX Series Motors Hybrid Stepper Motors Industrial ... Motors Stepper Motors Vibrating Motors with Gearhe... Mounts Base Mounts Bonded Mounts Centrebolt Mounts Conical Mounts Cup Mounts Cylindrical Mounts Finger Flex Mounts Leveling Mounts M Style Mounts Machinery Mounts Plate Mounts Rectangular Mounts Ring Mounts Square Mounts Uniload Mounts V Style Mounts Wedge Nuts Nuts Lock ORings ORings for Dental ... Oil Seals Packing Boxes and ... Parts Boxes Parts Bundles Pillars Pinion Wire Imperial Pinion Wire Metric Pins Ball Lock Pins Clevis Pins Cotter Pins Dowel

Visa Card Accepted
Visa
Secure Checkout


Pins General Pins Pull Pins Roll Pins Taper Pins Wirelock Plastic Plugs Plungers Ball Plungers Indexing Plungers Spring Positioning Power Adaptors Power Supplies Power Tool Parts Pressure Rollers Protective Packing... Pulley Blocks Pulleys Flat Belt Pulleys Grooved Pulleys Idler Pulleys PosiDrive Pulleys Synchromesh Pulleys Vee Punches Pushbike Bearings Ratchets and Pawls Resins Rivets Robotic Servo Motors Robotic Wheels Rod Ends Rollers Rope and Cable Rotary Safety Channel Screws Button Head Screws Cap Head Screws Captive Screws Cheese Head Screws Coach

Master Card Accepted
Mastercard
Secure Checkout


Screws Countersunk Screws Hex Head Screws Large Head Screws Pan Head Screws Panel Screws Round Head Screws Security Screws Self Tapping Screws Shoulder Screws Socket Set ... Screws Square Head Screws Thumb Screws Wood Sealing Plugs Seals and Sealing Sensors Sets Shaft Extenders an... Shaft Locks Shafting Aluminium Shafting General P... Shafting Hollow Shafting Precision... Shaftloc Sheet Shim Shock Absorbers Sleeves Snap Buttons Snaps Solar Parts Solarbotics Kits Soldering Spa Jet Motor Bear... Spacers Splined Shafts and... Spring Anchors Spring Assemblies Spring Damped Mounts Spring Motors

Pay By
Phone after Checkout
07 3245 7977
International +61 7 3245 7977


Spring Mounts Spring Reels Spring Washers Spring Wire Springs Anti Backlash Springs Compression Springs Constant F... Springs Die Springs Disc Springs Extension Springs General Springs Torsion Sprockets PosiDrive Spur Gear Stock Im... Spur Gear Stock Me... Spur Gears Circula... Square Shaft Stays Steam Engine Parts Straps Strip Strips Stroke Rotary Bush... Studs Suction Cups Surplus Stock Suspension Units Switches Tape Taper Grips Tee Joints Tension Bushings Tensioners Testers Thread Thread Inserts Threaded Rod Throwing Planes Timing Belt Lengths Timing Belts and P...

Amex Accepted
Amex
Secure Checkout


Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Timing Belts and P... Tips Tolerance Tooling Balls Tools Bending Tools Bits Tools Circlip Tools Crimping Tools Cutting Tools Deburring Tools Dental Repair Tools General Purpose Tools Magnetic Tools Measuring Tools Pullers Tools Screw Drivers Tools Screw Extrac... Tools Threading Torches Tracks Tube and Tubing Turntables Universal Joint Co... Universal Joints VRings Vacuum Cleaners Vee Belts Washers Aligning Washers Finishing

Paypal Accepted
Paypal
Secure Checkout
See PAYMENTS


Washers Flat Fibre Washers Flat Metallic Washers Flat Plastic Washers Flat Rubber Washers Lock Washers Locking Washers Serrated L... Washers Shoulder Washers Square Washers Thrust Wear Strips Wheels Industrial Wrenches Yoke Ends

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 148432 products in 3838 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.