Orings All Types - Small Parts And Bearings Categories


We are currently closed for stocktake and Easter. Online, e-mail and fax orders placed during this time will be processed on Tuesday 22nd April. Please have a Happy Easter.



Dental Bearing Kits

Hide Pictures

Go to Top  


Bearings and Oring kits for Dental Handpieces

Bearings and Oring kits for Dental Handpieces

Kits of Bearings - Orings - and Washers.

Related Information:
Dental Parts - Miscellaneous

Tools for Dental Handpiece Repair


Clamping Rings

Hide Pictures

Go to Top  


Rings - Retaining - PR Type Internal - For Linear Bearings

Rings - Retaining - PR Type Internal - For Linear Bearings

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


Rings - Retaining - C Type External - For Linear Bearings

Rings - Retaining - C Type External - For Linear Bearings

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Three Jaw Type - Hubs

Couplings - Three Jaw Type - Hubs

Match with Three Jaw Type inserts by OD. Two Hubs and one insert will be needed to make a complete coupling.

Complete with keyway and set screw. No lubrication needed.

Couplings - Three Jaw Type - Inserts

Couplings - Three Jaw Type - Inserts

Match with Three Jaw Type hubs by OD

Use Bost-Bronz inserts for high torque loads at slower speeds. Use rubber for quiter operation. Use polyurethane for moderate to heavy shock loads.

Couplings - Spider Type

Couplings - Spider Type

2.1 to 17 Nm.

Split Type Hub. Preloaded Rubber Spider. Minimal backlash. Choice of 3 different spiders for each size provides for different torque requirements. Hubs and spiders available separately or as a complete unit.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Spline Type - Complete

Couplings - Spline Type - Complete

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 deg C.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Spline Type - Spare Hubs

Couplings - Spline Type - Spare Hubs

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 deg C.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Spline Type - With Hytrel Sleeve

Couplings - Spline Type - With Hytrel Sleeve

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg.

Click for combined categories: All Insert and Jaw Type Couplings


Couplings - Rubber Spider Jaw Type - Complete

Couplings - Rubber Spider Jaw Type - Complete

Max 3600 RPM. 0.39 to 16.27 Nm.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Rubber Spider Jaw Type - Hub Only

Couplings - Rubber Spider Jaw Type - Hub Only

Match 2 hubs with a spider from the spiders category

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Rubber Spider Jaw Type - Spider Only

Couplings - Rubber Spider Jaw Type - Spider Only


Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Oldham - Complete - Acetal Disk - Clamp Type

Couplings - Oldham - Complete - Acetal Disk - Clamp Type

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 Deg C to +60 Deg C. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Polyurethane Spider Jaw Type - Complete

Couplings - Polyurethane Spider Jaw Type - Complete

Miniature aluminium curved jaw flexible couplings. 2 to 160 Nm.

Discs (either red as standard with blue or white optional) are available to purchase separately. Flexible couplings transmit torque and rotational angle while absorbing misalignment. When the misalignment exceeds allowable values, vibration may result or the life of the coupling may become shortened. Zero backlash in low torque application, made capable by having the hubs pressed in a spacer. Can be used as a flexible coupling in a high torque application.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Polyurethane Spider Jaw Type - Spider Only

Couplings - Polyurethane Spider Jaw Type - Spider Only

Max 3600 RPM. 0.39 to 16.27 Nm.


Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Spline Type - Spare Poyurethane Splines

Couplings - Spline Type - Spare Poyurethane Splines

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 deg C.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Flat Race Type

Bearings - Thrust - Ball - Flat Race Type

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Grooved Race Type

Bearings - Thrust - Ball - Grooved Race Type

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 2 Wave Type

Washers - Spring - 2 Wave Type

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


O-Rings

Hide Pictures

Go to Top  


O Rings - Cord

O Rings - Cord

Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.

Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (VitonR): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis.

O-Rings for Dental Applications

Hide Pictures

Go to Top  


O Rings - Dental

O Rings - Dental

Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:
Dental Bearings

Tools for Dental Handpiece Repair


Clamps

Hide Pictures

Go to Top  


Clamps - Gear - Screw Type

Clamps - Gear - Screw Type

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - 16mm Nuts - Bush Type

Screws - Ball - 16mm Nuts - Bush Type

Match all components within the 16mm range only.

Antibacklash. Repeatability less than 0.01mm. Accuracy less than 0.1mm/300mm when used with our screws. Hardened ground and polished Cf53 steel.

Click for combined categories: All Ball Screws


Pins - Ball Lock

Hide Pictures

Go to Top  


Pins - Ball Lock - Shoulder Type - T Handle

Pins - Ball Lock - Shoulder Type - T Handle

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle.


Click for combined categories: All Ball Lock Pins


Linear Slides

Hide Pictures

Go to Top  


Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow

Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Narrow

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard

Rail Systems - Type 2 - Linear - Precision - Carriage - Chrome - Standard

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination. Thin dense chrome.

Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated

Rail Systems - Type 2 - Linear - Precision - Rails - Chrome Coated

Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails.

Related Information:
Standard Thin Dense Chrome Carriages


Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Narrow

Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Narrow

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard

Rail Systems - Type 3 -Linear - Precision - Carriage - Carbon Steel - Standard

Match with rail by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Low drag longitudinal seals protect the the balls and ball path from contamination.

Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel

Rail Systems - Type 3 - Linear - Precision - Rails - Carbon Steel

Match with carriage by size column 1. Thomson 500 Series provide long life, exceptional rigidity, high dynamic and static load capabilities in all directions.

Accommodates high moment loads and maintains high running accuracy. Improved machine accuracies and rigidity resulting in reduced vibration and extended machine and tool life. Rails are subjected to multiple straightening processes during and after grinding of the ball paths to ensure straight and accurate rails.

Related Information:
Standard Carbon Steel Carriages


Hoist Rings

Hide Pictures

Go to Top  


Shackles - Anchor - Bolt Type

Shackles - Anchor - Bolt Type

Minimum ultimate load is 6 times the working load limit

Bolt type anchor shackles supplied with thin head bolt and nut with cotter pin. Meets US Federal Specification RR - C, Type IVA, Grade A, Class 3.

Click for combined categories: All Hoist Rings


Cam Followers

Hide Pictures

Go to Top  


Cam Followers - Roller Type - Eccentric Stud

Cam Followers - Roller Type - Eccentric Stud

Carbon steel roller type cam followers with eccentric stud.

Carbon Steel - Synthetic rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Click for combined categories: All Cam Followers


Cam Followers - Roller Type - Miniature - Standard

Cam Followers - Roller Type - Miniature - Standard

Small carbon steel roller type cam followers.

Carbon Steel - Nitrile Rubber seals assembled in the outer ring. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Click for combined categories: All Cam Followers


Bearings Acetal

Hide Pictures

Go to Top  


Bearings - Acetal - Special Types

Bearings - Acetal - Special Types

Light duty acetal bearings used for drawer runners, light duty tracks and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

Click for combined categories: All Acetal Bearings


Batteries

Hide Pictures

Go to Top  


Batteries - Coin Type

Batteries - Coin Type

Coin type batteries to suit watches, clocks, computers and other equipment. Lithium, Silver Oxide and Alkaline

Related Information:
Torches


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Ball Bearing Type

Washers - Disc Spring - Ball Bearing Type

Specially designed for preloading ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Cam Followers

Hide Pictures

Go to Top  


Cam Followers - Roller Type - Standard

Cam Followers - Roller Type - Standard

Carbon steel roller type cam followers.

Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing.

Click for combined categories: All Cam Followers


Cam Followers - Roller Type - Easy Mounting

Cam Followers - Roller Type - Easy Mounting

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Click for combined categories: All Cam Followers


Cam Followers - Roller Type - Stainless Steel

Cam Followers - Roller Type - Stainless Steel

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Click for combined categories: All Cam Followers


Cam Followers - Roller Type - Thrust Disc

Cam Followers - Roller Type - Thrust Disc

Carbon steel thrust disc roller type cam followers.

CF.WBR, CF.WBUUR: High Carbon Steel. CF.FWBR, CF.FWBUUR: Stainless Steel. Seals: Synthetic Rubber. Stud designed to fit H7 housing.

Click for combined categories: All Cam Followers


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Slit Type - Plastic - Clamp Hub

Couplings - Slit Type - Plastic - Clamp Hub

Lightweight molded patented coupling can replace many stainless or aluminum slit type couplings with lost coast and improved operation.

No windup or backlash or any derating for reversing applications. To ensure tight fit between shaft and coupling, a metal screw to metal nut design is used and does not utilize threads cut into moulded piece. Operating temperature -20o to 140o Celius. Made of Engineered polymer with stainless fastners. UV reisitant. Voltage and RF isolation.

Click for combined categories: All Helical and Slit Couplings


Couplings - Slit Type - Plastic - Set Screw

Couplings - Slit Type - Plastic - Set Screw

Lightweight molded patented coupling can replace many stainless or aluminum slit type couplings with lost coast and improved operation.

No windup or backlash or any derating for reversing applications. To ensure tight fit between shaft and coupling, a metal screw to metal nut design is used and does not utilize threads cut into moulded piece. Operating temperature -20o to 140o Celius. Made of Engineered polymer with stainless fastners. UV reisitant. Voltage and RF isolation.

Click for combined categories: All Helical and Slit Couplings


Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Round - Insert Type

Suspension Units - Rubber - Round - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Linear Slides

Hide Pictures

Go to Top  


Rail Systems - Type 1 - Linear - Precision - Rails

Rail Systems - Type 1 - Linear - Precision - Rails

Match with carriages by Size Column

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Click for combined categories: All Type 1 Carriages and Rails

Related Information:
Matching Narrow Carriages


Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Square - Insert Type

Suspension Units - Rubber - Square - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Linear Slides

Hide Pictures

Go to Top  


Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Rail Systems - Type 1 - Linear - Precision - Carriages - Flanged

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Click for combined categories: All Type 1 Carriages and Rails


Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow

Rail Systems - Type 1 - Linear - Precision - Carriages - Narrow

Match with rails by Size Column. With Lube Reservoir

Profile rail guides are used in the production of linear guidance systems with unlimited travel. They consist of a profile rail with 4 precision ground raceways and a slide usint with four ball circulation paths. The square configuration of the raceways results in a guidance system with good rigidity, capable of withstanding moment loads in all directions. The load carrying capacity is equal in all four directions. Low vibration and low noise. Case hardened steel. Supplied with a light preload. Lubricated with lithium based grease.

Click for combined categories: All Type 1 Carriages and Rails


Bearings Needle Roller

Hide Pictures

Go to Top  


Bearings - Needle Roller - Cage Type

Bearings - Needle Roller - Cage Type

Cage and Rollers.


Bearings - Needle Roller - Shell Type

Bearings - Needle Roller - Shell Type

Light Weight. Compact Design.

Couplings Other

Hide Pictures

Go to Top  


Couplings - K Type

Couplings - K Type

Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or HyrtelR is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / HyrtelR : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:
Shafting


Snap Buttons

Hide Pictures

Go to Top  


Snap Buttons - Flat Type

Snap Buttons - Flat Type

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.

Click for combined categories: All Snap Buttons


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Flange Locking Type

Washers - Disc Spring - Flange Locking Type

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 3 Wave Type - Spring Steel

Washers - Spring - 3 Wave Type - Spring Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers Thrust

Hide Pictures

Go to Top  


Washers - Thrust - DU Type

Washers - Thrust - DU Type

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating temperature - 200o to 280o celsius. Maximum load 250N per mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Click for combined categories: All Thrust Washers


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 3 Wave Type - 302 Stainless Steel

Washers - Spring - 3 Wave Type - 302 Stainless Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - 400 Grade Stainless

Washers - Spring - 3 Wave Type - 400 Grade Stainless

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - Berryllium Copper

Washers - Spring - 3 Wave Type - Berryllium Copper

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Adjustable - Push Type - Max  100N

Gas Springs - Adjustable - Push Type - Max 100N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 1300N

Gas Springs - Adjustable - Push Type - Max 1300N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  180N

Gas Springs - Adjustable - Push Type - Max 180N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 2600N

Gas Springs - Adjustable - Push Type - Max 2600N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  700N

Gas Springs - Adjustable - Push Type - Max 700N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force).

Click for combined categories: All Gas Springs


Collars

Hide Pictures

Go to Top  


Collars - Threaded - Clamp Type - Steel

Collars - Threaded - Clamp Type - Steel

Offer full radial holding power without marring the shaft.


Click for combined categories: All Threaded Shaft Collars


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Open (Type 2)

Housings - Linear - Open (Type 2)

Bearings not included.

Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Collars

Hide Pictures

Go to Top  


Collars - Threaded - Clamp Type - Stainless Steel

Collars - Threaded - Clamp Type - Stainless Steel

Offer full radial holding power without marring the shaft.


Click for combined categories: All Threaded Shaft Collars


Mounts Leveling

Hide Pictures

Go to Top  


Mounts - Leveling - Socket Type - Black

Mounts - Leveling - Socket Type - Black

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel

Mounts - Leveling - Socket Type - Steel

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Nickel Plated Steel.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - With Lag Holes

Mounts - Leveling - Stud Type - With Lag Holes

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - 303 Stainless Steel

Mounts - Leveling - Socket Type - 303 Stainless Steel

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - 303 Stainless Steel 2

Mounts - Leveling - Socket Type - 303 Stainless Steel 2

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - 303 Stainless - With Pad

Mounts - Leveling - Socket Type - 303 Stainless - With Pad

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - 316 Stainless - With Pad

Mounts - Leveling - Socket Type - 316 Stainless - With Pad

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Gold Chromate 2

Mounts - Leveling - Socket Type - Gold Chromate 2

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Black Chromate

Mounts - Leveling - Socket Type - Steel - Black Chromate

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Clear Chromate

Mounts - Leveling - Socket Type - Steel - Clear Chromate

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Gold Chromate

Mounts - Leveling - Socket Type - Steel - Gold Chromate

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Gold Chromate 2

Mounts - Leveling - Socket Type - Steel - Gold Chromate 2

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Nickel Plated

Mounts - Leveling - Socket Type - Steel - Nickel Plated

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - With Lag Holes

Mounts - Leveling - Socket Type - With Lag Holes

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Lag holes alow base to be secured.

Hardened ball prevents galling and forms it's own seat. Large diameter pad design assures solid support. Zinc plated with gold chromate finish.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - 303 Stainless Steel

Mounts - Leveling - Stud Type - 303 Stainless Steel

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded

Mounts - Leveling - Stud Type - 303 Stainless Steel - Padded

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - 316 Stainless Steel

Mounts - Leveling - Stud Type - 316 Stainless Steel

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded

Mounts - Leveling - Stud Type - 316 Stainless Steel - Padded

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Black Chromate

Mounts - Leveling - Stud Type - Steel - Black Chromate

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Clear Chromate

Mounts - Leveling - Stud Type - Steel - Clear Chromate

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Gold Chromate

Mounts - Leveling - Stud Type - Steel - Gold Chromate

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Gold Chromate - Padded

Mounts - Leveling - Stud Type - Steel - Gold Chromate - Padded

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Nickel Plated

Mounts - Leveling - Stud Type - Steel - Nickel Plated

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Nickel Plated - Padded

Mounts - Leveling - Stud Type - Steel - Nickel Plated - Padded

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad

Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad

Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad

Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad

Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Socket Type - Steel - Nickel Plated - With Pad

Mounts - Leveling - Socket Type - Steel - Nickel Plated - With Pad

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base

Mounts - Leveling - Stud Type - 303 Stainless Steel - Acetal Base

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Black Chromate - Padded

Mounts - Leveling - Stud Type - Steel - Black Chromate - Padded

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Clear Chromate - Padded

Mounts - Leveling - Stud Type - Steel - Clear Chromate - Padded

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Steel - Gold Chromate - Acetal Base

Mounts - Leveling - Stud Type - Steel - Gold Chromate - Acetal Base

15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Washers Thrust

Hide Pictures

Go to Top  


Washers - Thrust - DP4 Type

Washers - Thrust - DP4 Type

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.

Click for combined categories: All Thrust Washers


Washers - Thrust - DX Type

Washers - Thrust - DX Type

Provides maintenance free operation.

Opertating temperature minus 40o to plus 120 Degress Celsius. Provides maintenance free operation. Exhibits low wear rate. Seizure resistant. High Static and Dynamic Load capacity. Good frictional prperties, No water absorption, Compact and Light, Suitable for rotating, oscillating, reiprocating and sliding movements.

Click for combined categories: All Thrust Washers



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.