All Items: Max Gearheads - Categories


Gearheads MAX

Hide Pictures

Go to Top  


Gearheads - MAX 13

Gearheads - MAX 13

Use with Motors - DC - Ondrives - Max series.

13mm planetary steel gearhead supplied with fitting kit to suit Size 13 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 1 Stage = 8N, 2 Stage = 12N, 3 Stage = 16N, 4 Stage = 20N, 5 Stage = 20N. Operating Temperature Range: -15oC to +100oC, Mass: 11-23g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 16

Gearheads - MAX 16

Use with Motors - DC - Ondrives - Max series.

16mm planetary steel gearhead supplied with fitting kit to suit Size 16 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 2 Stage = 15N, 5 Stage = 20N. Operating Temperature Range: -15oC to +65oC, Mass: 23-35g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 22

Gearheads - MAX 22

Use with Motors - DC - Ondrives - Max series.

22mm planetary steel gearhead supplied with fitting kit to suit Size 22 motors, sleeve bearing output. Maximum Axial Load: 100N. Maximum Radial Load at 10mm from Flange: 70N. Operating Temperature Range: -15oC to +80oC, Mass: 55-94g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 32

Gearheads - MAX 32

Use with Motors - DC - Ondrives - Max series.

32mm planetary steel gearhead supplied with fitting kit to suit Size 32 motors, sleeve bearing output. Maximum Axial Load: 120N. Maximum Radial Load at 12mm from Flange: 140N. Operating Temperature Range: -15oC to +80oC, Mass: 118-226g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 40

Gearheads - MAX 40

Use with Motors - DC - Ondrives - Max series.

38mm spur steel gearhead supplied with fitting kit to suit Size 40 motors, sleeve bearing output. Maximum Axial Load: 30N. Maximum Radial Load at 5mm from Bearing: 50N. Operating Temperature Range: -5oC to +65oC, Mass: 60-75g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Motors DC MAX Series

Hide Pictures

Go to Top  


Motors - DC - MAX 13

Motors - DC - MAX 13

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 21g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 16

Motors - DC - MAX 16

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 21g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 22

Motors - DC - MAX 22

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 54g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 32

Motors - DC - MAX 32

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 213g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 40

Motors - DC - MAX 40

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 187g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline - Spur Gear - Size 56

Gearheads - Inline - Spur Gear - Size 56

Use with NEMA Size 56 Motors.

Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 135 N.m (1200 lb.in) / Peak Torque 270 N.m (2400 lb.in). Min Efficiency 90% / Max. Backlash 20 min.

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Gearmotors DC

Hide Pictures

Go to Top  


Gearmotors - DC - Size 112

Gearmotors - DC - Size 112

112mm Gearhead Body - Low Backlash.

Weight: 3.50kg. Check motor data and gearbox chart for max. torque figures. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. DUN80x80-24 DC Motor Included. Inline Gearbox TG112 series (112 x 55) included.

Click for combined categories: All DC Gearmotors


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline - 114 x  90mm

Gearheads - Inline - 114 x 90mm

Drilled and Tapped to suit your motor register.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline - 120 x 120mm

Gearheads - Inline - 120 x 120mm

Drilled and Tapped to suit your motor register.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  60 x  56mm

Gearheads - Inline - 60 x 56mm

Drilled and Tapped to suit your motor register.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  60 x  70mm

Gearheads - Inline - 60 x 70mm

Drilled and Tapped to suit your motor register.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  60 x  84mm

Gearheads - Inline - 60 x 84mm

Drilled and Tapped to suit your motor register.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 0.6/1.2kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  90 x  74mm

Gearheads - Inline - 90 x 74mm

Drilled and Tapped to suit your motor register.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  90 x  94mm

Gearheads - Inline - 90 x 94mm

Drilled and Tapped to suit your motor register.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg. Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  50 x  50mm

Gearheads - Inline - 50 x 50mm

Drilled and Tapped to suit your motor register.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  63 x  40mm

Gearheads - Inline - 63 x 40mm

Drilled and Tapped to suit your motor register.

End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads Right Angle

Hide Pictures

Go to Top  


Gearheads - Right Angle - Planetary - Size  56 - Precision

Gearheads - Right Angle - Planetary - Size 56 - Precision

Use with NEMA Size 56 Motors.

Maximum input speed 5000 rpm. Shaft loading 937 kg (2100 lbs) radial and 937 kg (2100 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Right Angle Gearheads

Related Information:
Gear Types


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline -  50 x  40mm

Gearheads - Inline - 50 x 40mm

Drilled and Tapped to suit your motor register.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  63 x  50mm

Gearheads - Inline - 63 x 50mm

Drilled and Tapped to suit your motor register.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  63 x  60mm

Gearheads - Inline - 63 x 60mm

Drilled and Tapped to suit your motor register.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline - Planetary - Size  56 - Economy

Gearheads - Inline - Planetary - Size 56 - Economy

Use with NEMA Size 56 Motors.

Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 446kg (1000 lbs) radial and 446kg (1000 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Gearheads - Inline - Planetary - Size  17 - Precision

Gearheads - Inline - Planetary - Size 17 - Precision

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Gearheads - Inline - Planetary - Size  56 - Precision

Gearheads - Inline - Planetary - Size 56 - Precision

Use with NEMA Size 56 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 937kg (2100 lbs) radial and 937kg (2100 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Gearheads - Inline -  50 x  40mm Hi Torque

Gearheads - Inline - 50 x 40mm Hi Torque

Drilled and Tapped to suit your motor register.

Case: Aluminium. Gear: Stainless Steel 303S21/31. Bearing: 440C. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: JHD51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads - Inline -  50 x  30mm

Gearheads - Inline - 50 x 30mm

Drilled and Tapped to suit your motor register.

End Caps: AA15 Red Anodised Aluminum (6082-T6). Centre Body: Black Delrin. Gears: High Carbon Steel 817M40(EN24). Weight: 0.14kg. Output Backlash: 3o - 6o. Approx Motion: J51-10 = 2o30' on output. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only. You will need to provide details of your motor register sizes if you require drilling and tapping to suit.

Click for combined categories: All Inline Gearheads


Gearheads Bu-Ord

Hide Pictures

Go to Top  


Gearheads - Bu-Ord Size 11

Gearheads - Bu-Ord Size 11

Ball bearings used throughout. Pat Nos 2892357 and 3396594.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size 11 - Heavy Duty

Gearheads - Bu-Ord Size 11 - Heavy Duty

Ball bearings used throughout.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size 15

Gearheads - Bu-Ord Size 15

Ball bearings used throughout. Pat No 2892357.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size 15 - Heavy Duty

Gearheads - Bu-Ord Size 15 - Heavy Duty

Ball bearings used throughout.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size 18

Gearheads - Bu-Ord Size 18

Ball bearings used throughout. Pat No 2892357.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size 18 - Heavy Duty

Gearheads - Bu-Ord Size 18 - Heavy Duty

Ball bearings used throughout.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size  8 - Heavy Duty

Gearheads - Bu-Ord Size 8 - Heavy Duty

Ball bearings used throughout.

Click for combined categories: All Bu-Ord Gearheads


Clamps

Hide Pictures

Go to Top  


Clamps - Gearhead Attaching

Clamps - Gearhead Attaching


Motors with Gearheads Stepper

Hide Pictures

Go to Top  


Motors - Stepper - With Gearheads

Motors - Stepper - With Gearheads

Select motor and gearhead separately.

Type 3110 Gearheads suit Type 3110 Motor. Type 3120 Gearheads suit Type 3120 Motor. 1.8 Deg Step Angle. Approx 2 Deg Backlash at output shaft. Insulation Class B.

Click for combined categories: All Stepper Motors


Hoist Rings

Hide Pictures

Go to Top  


Nuts - Eye

Nuts - Eye

Max load value based on a safety factor of 5 to 1


Click for combined categories: All Hoist Rings


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Adjustable - Push Type - Max  100N

Gas Springs - Adjustable - Push Type - Max 100N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 1300N

Gas Springs - Adjustable - Push Type - Max 1300N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  180N

Gas Springs - Adjustable - Push Type - Max 180N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 2600N

Gas Springs - Adjustable - Push Type - Max 2600N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  400N

Gas Springs - Adjustable - Push Type - Max 400N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 400N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 5000N

Gas Springs - Adjustable - Push Type - Max 5000N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 500N to 5000N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  700N

Gas Springs - Adjustable - Push Type - Max 700N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force).

Click for combined categories: All Gas Springs


Leadscrew Actuators

Hide Pictures

Go to Top  


Actuator - Leadscrew - Low Profile

Actuator - Leadscrew - Low Profile

Lead = Travel per revolution of screw. Rail, Carriage Plate and End Blocks: Aluminium Carriage Blocks: Die cast Zinc. Leadscrew: Steel. Bearings: Self lubricating DryLin(R) Plastic. Max. Permissible Radial Load: 2,800N (Static), 2,000N (Dynamic). Max. Permissible Thrust Load: 700N (Static), 0,23 MPa x m/s (Dynamic Trapezoidal Leadscrew), 0.08 x m/s (Axial Bearing).

Click for combined categories: All Leadscrew Actuators


Gearmotors DC

Hide Pictures

Go to Top  


Gearmotors - DC - Size  12

Gearmotors - DC - Size 12

12mm Gearhead Body Diameter.


Click for combined categories: All DC Gearmotors


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Multijaw - Precision

Couplings - Multijaw - Precision

Max Torque 3.5 Nm.

303 Stainless Steel. Stainless socket set screws supplied. 48 teeth - 64 Pitch. Max Torque 3.5 N.m (500 oz.in).

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Telescoping - Spline Type - Steel

Universal Joints - Telescoping - Spline Type - Steel

Max Speed 800 rpm.

Steel 9SMn Pb36K DIN808-G. Max. Working Angle - 60 Deg. Max Speed 800 rpm.

Click for combined categories: All Universal Joints


Latches

Hide Pictures

Go to Top  


Latches - Paddle - Flush - Large - 304 Stainless

Latches - Paddle - Flush - Large - 304 Stainless

Flush mounting. Max working load 55kg.


Gearmotors DC

Hide Pictures

Go to Top  


Gearmotors - DC - Size  20 Low Cost

Gearmotors - DC - Size 20 Low Cost

20mm Gearhead Body Diameter. Low cost. 70 RPM Output Speed. One model only. Reversible.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  25 Low Cost

Gearmotors - DC - Size 25 Low Cost

25mm Gearhead Body Diameter. 24.4mm Motor Body Diameter. Low cost. Reversible

D Shaped 4x8mm Output Shaft.

Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  27 Low Cost

Gearmotors - DC - Size 27 Low Cost

27mm Gearhead Body Diameter. Low cost. 36 RPM Output Speed. One model only. Reversible. 24mm motor body diameter.


Click for combined categories: All DC Gearmotors


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Telescoping - Spline Type - Needle Roller

Universal Joints - Telescoping - Spline Type - Needle Roller

Max Speed 4000 RPM.

Steel 9SMn Pb36K DIN808-W. Max. Working Angle - 60 Deg. Max. Speed 4000 RPM.

Click for combined categories: All Universal Joints


Latches

Hide Pictures

Go to Top  


Latches - Paddle - Flush - Large - Black Powder Coated

Latches - Paddle - Flush - Large - Black Powder Coated

Flush mounting. Max working load 55kg. With bright zinc plated slide.


Gearmotors DC

Hide Pictures

Go to Top  


Gearmotors - DC - Size  37/350 Low Cost

Gearmotors - DC - Size 37/350 Low Cost

37mm Gearhead Body Diameter. Low cost. 160 RPM Output Speed. One model only. Reversible.


Click for combined categories: All DC Gearmotors


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Spider Type B - Complete

Couplings - Spider Type B - Complete

Max 3600 RPM. 0.39 to 16.27 Nm. Match only hubs and spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Rubber spider and metal hubs.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting

Replacement Hubs To Suit


Couplings Other

Hide Pictures

Go to Top  


Couplings - Geargrip - Standard - Complete

Couplings - Geargrip - Standard - Complete

0.67 to 6.78 Nm. Max speed 3000 rpm.

Sleeve - Neoprene with Ground OD; Hub - Zinc Alloy Die Casting. Suitable operating temperature is -28 to 70 Deg. Celsius. Features: no lubrication, electrically isolated, dampens shock and vibration.

Click for combined categories: All Standard Geargrip Components

Related Information:
Geargrip Standard Hubs

Shafting


Couplings - Sleeve Type - Complete

Couplings - Sleeve Type - Complete

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:
Shafting

Replacement Hubs to Suit Sleeve Type Couplings


Couplings - Sleeve Type - Hubs

Couplings - Sleeve Type - Hubs

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:
Shafting


Couplings - Sleeve Type - Sleeves

Couplings - Sleeve Type - Sleeves

0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:
Shafting


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Steel - Miniature

Universal Joints - Steel - Miniature

Steel with plain bearings

Max speed 500rpm. Suitable for low speed motorised application.

Click for combined categories: All Universal Joints


Mounts Leveling

Hide Pictures

Go to Top  


Mounts - Leveling - Nylathane - Studded Type - Single Lag Hole

Mounts - Leveling - Nylathane - Studded Type - Single Lag Hole

Max load 3200kg.


Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Couplings Other

Hide Pictures

Go to Top  


Couplings - Geargrip - Standard - Hubs Only

Couplings - Geargrip - Standard - Hubs Only

0.67 to 6.78 Nm. Max speed 3000 rpm.


Click for combined categories: All Standard Geargrip Components

Related Information:
Geargrip Standard Complete Couplings


Couplings - Geargrip - Standard - Sleeves Only

Couplings - Geargrip - Standard - Sleeves Only

0.67 to 6.78 Nm. Max speed 3000 rpm.


Click for combined categories: All Standard Geargrip Components

Related Information:
Geargrip Standard Complete Couplings


Cable

Hide Pictures

Go to Top  


Cable - Synchromesh

Cable - Synchromesh

Pitch Error +/-0.050 mm. Cumulative Pitch Error +/-4.070 mm max. over 100 pitches. Temperature Range = -30 Deg. Celcius to +80 Deg. Celcius. Avoid strong acids, alkalies and organic solvents.

Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Helical - Precision

Couplings - Helical - Precision

0.14 to 9 Nm. 25000 max RPM.

5o max angular misalignment. 0.076 mm Parallel offset. Zero Axial motion. Zero backlash.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Stainless Steel - Miniature

Universal Joints - Stainless Steel - Miniature

Stainless Steel with plain bearings

Max speed 500rpm. Suitable for low speed motorised application.

Click for combined categories: All Universal Joints


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Helical - Standard

Couplings - Helical - Standard

0.1 to 16.2 Nm.

Zero backlash. Max. Ang Misalignment 5o. Max Parallel Offset 0.25mm.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Gearboxes Cross Axis

Hide Pictures

Go to Top  


Gearboxes - Cross Axis -  38.9 x  31.8 x  19.1mm

Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1mm

Worm Gears - Precision.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 oC to +146 oC (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearmotors AC

Hide Pictures

Go to Top  


Gearmotors - A.C. Single Phase - Size 60

Gearmotors - A.C. Single Phase - Size 60

Max Capacitance - Induction Type - 50 Hz 1.0uf / 60 Hz 0.8 uF. Max Capacitance - Hysteresis Type - 0.8uf. Unit Weight Approx 0.8 KG. Machined Aluminium Housing - Steel Shaft. Steel / Phenolic Gears - Bronze Bearings.

Click for combined categories: All Right Angle Gearheads


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Oldham - Hubs - Clamp Style

Couplings - Oldham - Hubs - Clamp Style

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Click for combined categories: All Oldham Hubs

Related Information:
Shafting


Latches

Hide Pictures

Go to Top  


Latches - Adjustable Grip - Miniature

Latches - Adjustable Grip - Miniature

Rugged construction. Single hole installation. Made from zinc plated steel.

Max working load 15kg. Ultimate load 40kg. Choice of black nylon head or low profile slotted head.

Latches - Compression - Vise-Action - T-Handle - Non Locking

Latches - Compression - Vise-Action - T-Handle - Non Locking

Black powder coated die cast zinc. Max working load 67kg. Average ultimate load 150kg.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Paddle - Flush - Medium - 304 Stainless

Latches - Paddle - Flush - Medium - 304 Stainless

Flush mounting. Slide is 1010 steel, chrome plated. Max working load 22kg.


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Sets - Stainless Steel

Washers - Self Aligning - Sets - Stainless Steel

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Gearboxes Inline

Hide Pictures

Go to Top  


Gearboxes - Inline - 112.0 x  52.0 Low Backlash

Gearboxes - Inline - 112.0 x 52.0 Low Backlash

Taper Gears - Weight: 1.50kg. TG112 Series.

Case: Anodised Aluminum 6082. Taper Gears: 817M40T High Carbon Steel. Weight: 1.50kg. Output Backlash: Less than 8.1 arc/min at output. Max Input Speed: 3000 Rpm.

Click for combined categories: All Inline Gearboxes

Related Information:
Inexpensive Gearmotor Kits


Gearboxes Tee

Hide Pictures

Go to Top  


Gearboxes - Tee -  62.5 x  50.8 x  30.0mm

Gearboxes - Tee - 62.5 x 50.8 x 30.0mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  85.5 x  77.8 x  31.8mm

Gearboxes - Tee - 85.5 x 77.8 x 31.8mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Tee Gearboxes


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Oldham - Disks for Clamp Style

Couplings - Oldham - Disks for Clamp Style

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Click for combined categories: All Oldham Disks

Related Information:
Shafting


Couplings - Oldham - Hubs - Set Screw Style

Couplings - Oldham - Hubs - Set Screw Style

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Click for combined categories: All Oldham Hubs

Related Information:
Shafting


Latches

Hide Pictures

Go to Top  


Latches - Compression - Vise-Action - T-Handle - Locking

Latches - Compression - Vise-Action - T-Handle - Locking

Black powder coated die cast zinc. Keys included. Max working load 67kg. Average ultimate load 150kg.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Helical - Long Series

Couplings - Helical - Long Series

2.9 to 31.4 Nm.

5o max angular misalignment. 0.762 mm Parallel offset. +/- 0.254 mm Axial motion. Zero backlash.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings - Helical - Low Inertia

Couplings - Helical - Low Inertia

0.8 to 13.2 Nm.

5o max angular misalignment. 0.254 mm Parallel offset. +/- 0.203 mm Axial motion. Zero backlash.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Oldham - Complete - Acetal Disk - Clamp Type

Couplings - Oldham - Complete - Acetal Disk - Clamp Type

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 oC to +60 oC. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Oldham - Complete - Acetal Disk - Set Screw

Couplings - Oldham - Complete - Acetal Disk - Set Screw

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 oC to +60 oC. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings - Oldham - Disks for Set Screw Style

Couplings - Oldham - Disks for Set Screw Style

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Click for combined categories: All Oldham Disks

Related Information:
Shafting


Couplings Bellows

Hide Pictures

Go to Top  


Couplings - Bellows - Set Screw - Stainless Steel 0.1 to 10Nm

Couplings - Bellows - Set Screw - Stainless Steel 0.1 to 10Nm

Stainless steel bellows with Aluminium hub

Max speed 15000 rpm. Bore tolerance H7. Temperature range minus 30 to plus 120 oC.

Click for combined categories: All Bellows Couplings


Locking Assemblies

Hide Pictures

Go to Top  


Assemblies - Locking - Flanged

Assemblies - Locking - Flanged

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

Click for combined categories: All Locking Assemblies


Assemblies - Locking - Unflanged

Assemblies - Locking - Unflanged

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

Click for combined categories: All Locking Assemblies


Couplings Other

Hide Pictures

Go to Top  


Couplings - BoWex - Junior

Couplings - BoWex - Junior

Nylon 2 piece and 3 piece couplings. 5 to 24 Nm. 6000 rpm max.

Approved distribution through the Australian Wholesaler (Deanquip). Crowned gear teeth - No need for lubrication. Chemical resistant nylon. Electrically insulated. Grub Screw opposite Keyway.

Related Information:
Shafting


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Sets - Hardened Steel

Washers - Self Aligning - Sets - Hardened Steel

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Bronze Bearing

Housings - Bearing - Flanged - Bronze Bearing

5o Static Alignment.

Bearing: Bronze SAE 840 (oil impregnated). Housing: Sintered Aluminium. Bearing Retainer: Outer retainer is steel (which is clinched into Aluminium housing) with a Nylon washer on first face. Apply appropriate factor of safety to the nominal loads and speeds specified. Mating shaft rec. Min. 100 HRB. Max surface finish 16 RMS. Rec. shaft clearance 0.013 - 0.038mm.

Click for combined categories: All Housings with Integral Bearing


Gearboxes Cross Axis

Hide Pictures

Go to Top  


Gearboxes - Cross Axis -  52.4 x  44.5 x  25.4

Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4

Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 oC to +146 oC (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  77.8 x  63.5 x  34.9

Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9

Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 oC to +146 oC (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes Tee

Hide Pictures

Go to Top  


Gearboxes - Tee -  38.9 x  38.1 x 27.0mm B

Gearboxes - Tee - 38.9 x 38.1 x 27.0mm B

1:1, 2:1 and 3:1 ratios. GDRA Series. Miniature gearbox.

Max Speed 2000 RPM. Max Backlash 5o. Bevel Gears.

Click for combined categories: All Tee Gearboxes


Couplings Other

Hide Pictures

Go to Top  


Couplings - Double Disk - Aluminium

Couplings - Double Disk - Aluminium

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:
Shafting


Latches

Hide Pictures

Go to Top  


Latches - T-Handle - Basic

Latches - T-Handle - Basic

Made of die cast zinc with matte black polyester powder coated and zinc alloy plated steel parts. Max working load 44kg. Average ultimate load 88kg. Three hole mount installation. 8-32 screws and lockwashers supplied for max 4mm door thickness.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155106 products in 3673 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.