All Items: Locking Washers - Categories


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Flange Locking Type

Washers - Disc Spring - Flange Locking Type

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Washers Locking

Hide Pictures

Go to Top  


Washers - Serrated - Safety

Washers - Serrated - Safety

Spring Steel Hardened Black.

Click for combined categories: All Serrated Locking Washers


Washers Serrated Locking

Hide Pictures

Go to Top  


Washers - LockRite

Washers - LockRite

Supplied in pairs.

Also see Nordlock and Disk Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers - Disk Lock

Washers - Disk Lock

Also see Nord Lock and Lockrite washers

Stainless Grade Grade A2 302/316 18-8. Vibration-proof self tightening structural locking device. Maximum Working Temp: +430oC. DISC-LOCK(R) has outperformed all other types of loose, washered, threaded or pinned systems. in a wide range of high stress, corrosive, and vibration sensitive applications.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers - Nord Lock - 316 Stainless

Washers - Nord Lock - 316 Stainless

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers - Nord Lock - Zinc Plated

Washers - Nord Lock - Zinc Plated

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Clamps

Hide Pictures

Go to Top  


Clamp Kits - Timing Belt

Clamp Kits - Timing Belt

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Latches

Hide Pictures

Go to Top  


Handles - Latching - 2-Point Locking Rod Kit

Handles - Latching - 2-Point Locking Rod Kit

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Disk Locking

Nuts - Disk Locking

Body: Medium Carbon Steel (1035/45) HRC 26-34. Plating: Zinc ASTM B - 633. Free Spinning (no thread interference) (H6 Tolerance) - One piece assembly - No washer required. Installed with standard equipment, no special tools required - Easy to remove - Reusable. Can be used with Grade 5 (Class 8.8), Grade 8 (Class 10.9) and even stronger bolted.

Click for combined categories: All Lock Nuts


Bearings Thrust

Hide Pictures

Go to Top  


Washers - Self Aligning - Sets - Plastic

Washers - Self Aligning - Sets - Plastic

Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Washers Thrust

Hide Pictures

Go to Top  


Washers - Thrust - DP4 Type

Washers - Thrust - DP4 Type

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.

Click for combined categories: All Thrust Washers


Washers - Thrust - DU Type

Washers - Thrust - DU Type

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating temperature - 200o to 280o celsius. Maximum load 250N per mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Click for combined categories: All Thrust Washers


Washers - Thrust - DX Type

Washers - Thrust - DX Type

Provides maintenance free operation.

Opertating temperature minus 40o to plus 120 Degress Celsius. Provides maintenance free operation. Exhibits low wear rate. Seizure resistant. High Static and Dynamic Load capacity. Good frictional prperties, No water absorption, Compact and Light, Suitable for rotating, oscillating, reiprocating and sliding movements.

Click for combined categories: All Thrust Washers


Washers - Thrust - Stainless Steel and PTFE

Washers - Thrust - Stainless Steel and PTFE

Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.

Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating.

Click for combined categories: All Thrust Washers


Plungers Ball

Hide Pictures

Go to Top  


Washers - for Indexing Pull Knobs

Washers - for Indexing Pull Knobs

The washer is slid beneath the disengaged pull knob so that the follower pins engage in the slot.


Click for combined categories: All Indexing Plungers

Related Information:
Plungers to Suit with Locknut


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Ball Bearing Type

Washers - Disc Spring - Ball Bearing Type

Specially designed for preloading ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Carbon Steel

Washers - Disc Spring - Carbon Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Plastic

Washers - Disc Spring - Plastic

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Stainless Steel

Washers - Disc Spring - Stainless Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 2 Wave Type

Washers - Spring - 2 Wave Type

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - 302 Stainless Steel

Washers - Spring - 3 Wave Type - 302 Stainless Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - 400 Grade Stainless

Washers - Spring - 3 Wave Type - 400 Grade Stainless

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - Berryllium Copper

Washers - Spring - 3 Wave Type - Berryllium Copper

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - Spring Steel

Washers - Spring - 3 Wave Type - Spring Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - Curved - Spring Steel

Washers - Spring - Curved - Spring Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers - Spring - Curved - Stainless Steel

Washers - Spring - Curved - Stainless Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Components - Hardened Steel

Washers - Self Aligning - Components - Hardened Steel

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers - Self Aligning - Components - Stainless Steel

Washers - Self Aligning - Components - Stainless Steel

Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers - Self Aligning - Sets - Hardened Steel

Washers - Self Aligning - Sets - Hardened Steel

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers - Self Aligning - Sets - Stainless Steel

Washers - Self Aligning - Sets - Stainless Steel

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers Finishing

Hide Pictures

Go to Top  


Washers - Cup - Brass - Nickel Plated

Washers - Cup - Brass - Nickel Plated

For countersunk screws.


Click for combined categories: All Cup Washers


Washers - Cup - Nylon

Washers - Cup - Nylon

Countersunk washers for use with screws for decorative finishing


Click for combined categories: All Cup Washers


Washers - Cup - Stainless Steel

Washers - Cup - Stainless Steel

For countersunk screws.

Stainless Steel cup washers.

Click for combined categories: All Cup Washers


Washers - Cup - Steel - Nickel Plated

Washers - Cup - Steel - Nickel Plated

Countersunk washers for use with screws for decorative finishing


Click for combined categories: All Cup Washers


Washers Flat Fibre

Hide Pictures

Go to Top  


Washers - Flat - Fibre

Washers - Flat - Fibre

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 oC. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - C - 303 Stainless Steel

Washers - C - 303 Stainless Steel

Knurled outside edge


Click for combined categories: All C Washers


Washers - C - Steel

Washers - C - Steel

Cold finished steel, case hardened with a black oxide finish.


Click for combined categories: All C Washers


Washers - C - Swing

Washers - C - Swing

Cold finished steel, hardened and ground. Black oxide finish.


Washers - Flat - Aluminium

Washers - Flat - Aluminium

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Bonded Neoprene

Washers - Flat - Bonded Neoprene

Galvanised sealing washers with neoprene centre for use with self drilling screws

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Commercial

Washers - Flat - Brass - Commercial

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Precision

Washers - Flat - Brass - Precision

Precision Tolerances. Laminated brass shim washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Carbon Spring Steel - Precision Shim

Washers - Flat - Carbon Spring Steel - Precision Shim

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gamg cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Hardened Steel

Washers - Flat - Hardened Steel

Medium carbon steel through hardened to RC 43-49. Zinc dichromate finish. All dimensions shows are minimum.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - High Tensile

Washers - Flat - High Tensile

Grade 8 high tensile washers

ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Mild Steel

Washers - Flat - Mild Steel

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Sintered Bronze - Precision

Washers - Flat - Sintered Bronze - Precision

Flat thrust washers made from oil impregnated sintered bronze

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Commercial

Washers - Flat - Stainless Steel - Commercial

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Precision Ground

Washers - Flat - Stainless Steel - Precision Ground

Non magnetic and corrosion resistant. Sides are flat and parallel to within 0.025mm (0.001 in.)

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Precision Shim

Washers - Flat - Stainless Steel - Precision Shim

Precision Tolerances.


Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stamped - Heavy Duty - Hardened

Washers - Flat - Stamped - Heavy Duty - Hardened

Heat treated. Black oxide finish.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Titanium - CP Grade 1

Washers - Flat - Titanium - CP Grade 1

Flat washers. CP Grade 1 Titanium.

CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Titanium - Ti-Gr5/Ti-6AI4v

Washers - Flat - Titanium - Ti-Gr5/Ti-6AI4v

Flat washers. 6AL-4V (Grade 5) High strength titanium alloy.

6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Heavy Duty - Machined - Stainless Steel

Washers - Heavy Duty - Machined - Stainless Steel

303 Stainless Steel

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Heavy Duty - Machined - Steel

Washers - Heavy Duty - Machined - Steel

Case hardened cold finished steel with black oxide finish.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - Nylon

Washers - Flat - Nylon

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers - Flat - Peek

Washers - Flat - Peek

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers - Flat - PTFE

Washers - Flat - PTFE

Teflon Washers

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers - Flat - PVC

Washers - Flat - PVC

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers Flat Rubber

Hide Pictures

Go to Top  


Washers - Flat - Rubber

Washers - Flat - Rubber

Nitrile Duro 70

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - External Tooth - Spring Steel

Washers - Lock - External Tooth - Spring Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - External Tooth - Stainless Steel

Washers - Lock - External Tooth - Stainless Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Spring Steel

Washers - Lock - Internal Tooth - Spring Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Stainless Steel

Washers - Lock - Internal Tooth - Stainless Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Grade 8

Washers - Lock - Split - Grade 8

Zinc plated


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Stainless Steel

Washers - Lock - Split - Stainless Steel

304 Grade Stainless Steel


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Steel

Washers - Lock - Split - Steel

Plain and zinc plated

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Titanium

Washers - Lock - Split - Titanium

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Tabbed - Heavy Duty

Washers - Lock - Tabbed - Heavy Duty

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Tabbed - MB Series

Washers - Lock - Tabbed - MB Series

Standard MB series lockwasher for use with bearing locknuts.

Carbon spring steel. Use with N/AN and NL series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Tabbed - Thin

Washers - Lock - Tabbed - Thin

Thin section - use with NT series locknuts.

Use with NT series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Washers Shoulder

Hide Pictures

Go to Top  


Washers - Shoulder - Nylon

Washers - Shoulder - Nylon


Click for combined categories: All Shoulder Washers


Washers Square

Hide Pictures

Go to Top  


Washers - Square - Heavy Duty - 304 Stainless Steel

Washers - Square - Heavy Duty - 304 Stainless Steel


Click for combined categories: All Square Washers


Washers - Square - Heavy Duty - Steel

Washers - Square - Heavy Duty - Steel


Click for combined categories: All Square Washers


Washers - Square - Standard Duty - Galvanised

Washers - Square - Standard Duty - Galvanised


Click for combined categories: All Square Washers


Washers - Square - Standard Duty - Plain

Washers - Square - Standard Duty - Plain


Click for combined categories: All Square Washers


Hoist Rings

Hide Pictures

Go to Top  


Washers - Bevel

Washers - Bevel

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.

Click for combined categories: All Hoist Rings


Locking Compounds

Hide Pictures

Go to Top  


Threadlockers

Threadlockers

ZAP, Molytec, Loctite, Pacer. Pipe sealant, low to high strength threadlockers. Hydraulic threadlocker. Wick-In. Stops threads loosening from vibration.


Click for combined categories: All Adhesives


Locking Assemblies

Hide Pictures

Go to Top  


Assemblies - Locking - Flanged

Assemblies - Locking - Flanged

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

Click for combined categories: All Locking Assemblies


Assemblies - Locking - Unflanged

Assemblies - Locking - Unflanged

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.

Click for combined categories: All Locking Assemblies


Locking Bushings

Hide Pictures

Go to Top  


Bushings - Locking Hub

Bushings - Locking Hub

Friction grip construction.

Connects rotating components to shafts. Transmits high torque without keyways. Two styles - see diagrams.

Click for combined categories: All Locking Bushings


Devices - Locking - Small Series

Devices - Locking - Small Series

10 - 25mm Bores

15 to 390 Nm. ETG 100 High Strength Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Devices - Locking - Style 1

Devices - Locking - Style 1

25 - 280mm Bores

840 to 360000 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Devices - Locking - Style 2

Devices - Locking - Style 2

18 - 180mm Bores

310 to 46980 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Devices - Locking - Style 3

Devices - Locking - Style 3

18 - 180mm Bores

260 to 36100 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Devices - Locking - Style 4

Devices - Locking - Style 4

19 - 220mm Bores

255 to 68000 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Devices - Locking - Style 5

Devices - Locking - Style 5

19 - 180mm Bores

350 to 41300 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Devices - Locking - Style 6

Devices - Locking - Style 6

19 - 180mm Bores

300 to 34250 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Devices - Locking - Style 7

Devices - Locking - Style 7

6 - 120mm Bores

12 to 17500 Nm. C60 Steel. Recommended machining tolerances Shaft h8, Hub H8.

Click for combined categories: All Locking Bushings


Elements - Locking

Elements - Locking

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.

Bolts

Hide Pictures

Go to Top  


Bolts - Locking

Bolts - Locking

Steel: Quality 5.8. Black oxide finish. Locking pin hardened and polished. Stainless Steel: Finished Bright. Threaded Sleeve x 10 CrNiS 18 9 = 1.4034. Mushroom Grip: Black thermoplastic. Locking bolts are used to prevent any change in locking position due to shearing forces. A new locking position can only be set after the bolt has been manually disengaged.

Locking Compounds

Hide Pictures

Go to Top  


Retaining Compounds

Retaining Compounds

Molytec and Loctite. Includes Quickmetal. High and medium retaining for bearings, bushes, gears, pulleys and sprockets.


Click for combined categories: All Adhesives


Dental Handpiece Parts

Hide Pictures

Go to Top  


Several Dental Washers Parts

Several Dental Washers Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Clamps

Hide Pictures

Go to Top  


Clamps - Syncro - Locking

Clamps - Syncro - Locking


Click for combined categories: All Syncro Clamps


Locking Assemblies

Hide Pictures

Go to Top  


Connectors - Hub - Locking

Connectors - Hub - Locking

For fast and accurate positioning and locking of components on shafts.

Fast and frequent mounting and dismounting with only one screw. No axial movement when mounted. Uniform surface pressure against shaft component prevents damage to these parts. Temperature range Minus 30 oC to Plus 82 Deg C. Double walled sleeve expands when the pressure screw is tightened to the specified torque. Dismantled easily by releasing pressure on the screw.

Locking Bushings

Hide Pictures

Go to Top  


Eccentric Bushings

Eccentric Bushings

Eccentric Bushings: Burnished steel. Used to position correctly side thrust pins. Using the eccentric bushings, the thrust pin can be positioned very precisely to adopt to the tolerance of the piece to be mounted.

Latches

Hide Pictures

Go to Top  


Latches - L Handle - Locking

Latches - L Handle - Locking

Black polyamide and clear coated zinc

Includes key. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Plungers Indexing

Hide Pictures

Go to Top  


Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.

Click for combined categories: All Indexing Plungers


Plungers - Indexing - Locking - With Knob - Steel

Plungers - Indexing - Locking - With Knob - Steel

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Body and pin are steel with black oxide finish.

Click for combined categories: All Indexing Plungers



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155106 products in 3673 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.