All Items: Lock Nuts - Categories


Part Description Matches

Hide Pictures

Go to Top  


Search again without part description matches.


DBR168

Part number DBR168.

Type: Nylon Insert Lock Nuts. Thread: 2.184mm (2-56 UNC). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: 5



DBR169

Part number DBR169.

Type: Nylon Insert Lock Nuts. Thread: 2.515mm (3-48 UNC). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: 12



DBR170

Part number DBR170.

Type: Nylon Insert Lock Nuts. Thread: 2.845mm (4-40 UNC). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: 5



DBR171

Part number DBR171.

Type: Nylon Insert Lock Nuts. Thread: 3.5mm (6-32 UNC). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: 2



DBR178

Part number DBR178.

Contains: 4-40C x 25.40 Pan Slotted Screws (4 pcs). Contains: Lock Nuts (4 pcs). Contains: Flat Washers (4 pcs).
Group: Hobby - Screw and Nut Combo Packs

Stock: 1



DBR179

Part number DBR179.

Contains: 6-32C x 25.40 Pan Slotted Screws (4 pcs). Contains: Lock Nuts (4 pcs). Contains: Flat Washers (4 pcs).
Group: Hobby - Screw and Nut Combo Packs

Stock: 2



DBRC2101

Part number DBRC2101.

Type: Nylon Insert Lock Nuts. Thread: 3.0mm (M3x0.5 Standard). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: 2



DBRC2102

Part number DBRC2102.

Type: Nylon Insert Lock Nuts. Thread: 4.0mm (M4x0.7 Standard). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: 6



DBR156

Part number DBR156.

Description: Gear Block Set. Description: Nylon Gear Block Set.. Description: Includes two nylon blocks, four bolts, lock washers, nuts, one spacer..
Group: Dubro Accessories Listed by Description

Stock: Backorder



DBR174

Part number DBR174.

Contains: 2-56C x 12.70 Pan Slotted Screws (4 pcs). Contains: Lock Nuts (4 pcs). Contains: Flat Washers (4 pcs).
Group: Hobby - Screw and Nut Combo Packs

Stock: Backorder



DBR175

Part number DBR175.

Contains: 3-48C x 19.05 Pan Slotted Screws (4 pcs). Contains: Lock Nuts (4 pcs). Contains: Flat Washers (4 pcs).
Group: Hobby - Screw and Nut Combo Packs

Stock: Backorder



DBR176

Part number DBR176.

Contains: 4-40C x 31.80 Pan Slotted Screws (4 pcs). Contains: Lock Nuts (4 pcs). Contains: Flat Washers (4 pcs).
Group: Hobby - Screw and Nut Combo Packs

Stock: Backorder



DBR177

Part number DBR177.

Contains: 6-32C x 31.80 Pan Slotted Screws (4 pcs). Contains: Lock Nuts (4 pcs). Contains: Flat Washers (4 pcs).
Group: Hobby - Screw and Nut Combo Packs

Stock: Backorder



DBR329

Part number DBR329.

Type: Nylon Insert Lock Nuts. Thread: 4.166mm (8-32 UNC). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: Backorder



DBR585

Part number DBR585.

Type: Nylon Insert Lock Nuts. Thread: 4.762mm (10-32 UNF). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: Backorder



DBR652

Part number DBR652.

Type: Nylon Insert Lock Nuts. Thread: 6.35mm (1/4-20 UNC). Material: Zinc Plated.
Group: Hobby - Nut Packs

Stock: Backorder



DBRM3112

Part number DBRM3112.

Type: Nylon Insert Lock Nuts. Thread: 2.845mm (4-40 UNC). Material: Stainless Steel.
Group: Hobby - Nut Packs

Stock: Backorder



DBRM3113

Part number DBRM3113.

Type: Nylon Insert Lock Nuts. Thread: 3.5mm (6-32 UNC). Material: Stainless Steel.
Group: Hobby - Nut Packs

Stock: Backorder



DBRM3114

Part number DBRM3114.

Type: Nylon Insert Lock Nuts. Thread: 4.166mm (8-32 UNC). Material: Stainless Steel.
Group: Hobby - Nut Packs

Stock: Backorder



HN10-OUK

Part number HN10-OUK.

Suits Nut Diameter: 68. Suits KM Locknuts: KM10. Suits N Lock Nuts: N10.
Group: Tools - Hook Spanner

Stock: Backorder



HN11-OUK

Part number HN11-OUK.

Suits Nut Diameter: 75. Suits KM Locknuts: KM11. Suits N Lock Nuts: N11.
Group: Tools - Hook Spanner

Stock: Backorder



HN12-OUK

Part number HN12-OUK.

Suits Nut Diameter: 80. Suits KM Locknuts: KM12. Suits N Lock Nuts: N12.
Group: Tools - Hook Spanner

Stock: Backorder



HN13-OUK

Part number HN13-OUK.

Suits Nut Diameter: 90. Suits KM Locknuts: KM13. Suits N Lock Nuts: N13.
Group: Tools - Hook Spanner

Stock: Backorder



HN14-OUK

Part number HN14-OUK.

Suits Nut Diameter: 92. Suits KM Locknuts: KM14. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN1516-OUK

Part number HN1516-OUK.

Suits Nut Diameter: 95 - 105. Suits KM Locknuts: KM15. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN15-OUK

Part number HN15-OUK.

Suits Nut Diameter: 95 - 100. Suits KM Locknuts: -. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN1617-OUK

Part number HN1617-OUK.

Suits Nut Diameter: 105 - 115. Suits KM Locknuts: KM16, KM17. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN16-OUK

Part number HN16-OUK.

Suits Nut Diameter: 105. Suits KM Locknuts: KM16. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN1718-OUK

Part number HN1718-OUK.

Suits Nut Diameter: 110 - 120. Suits KM Locknuts: KM17, KM18. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN17-OUK

Part number HN17-OUK.

Suits Nut Diameter: 110. Suits KM Locknuts: KM17. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN1819-OUK

Part number HN1819-OUK.

Suits Nut Diameter: 120 - 125. Suits KM Locknuts: KM18, KM19. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN18-OUK

Part number HN18-OUK.

Suits Nut Diameter: 120. Suits KM Locknuts: KM18. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN1920-OUK

Part number HN1920-OUK.

Suits Nut Diameter: 125 - 130. Suits KM Locknuts: KM19, KM20. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN19-OUK

Part number HN19-OUK.

Suits Nut Diameter: 125. Suits KM Locknuts: KM19. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN1-OUK

Part number HN1-OUK.

Suits Nut Diameter: 20 - 22. Suits KM Locknuts: KM1. Suits N Lock Nuts: N01.
Group: Tools - Hook Spanner

Stock: Backorder



HN20-OUK

Part number HN20-OUK.

Suits Nut Diameter: 130. Suits KM Locknuts: KM20. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN22-OUK

Part number HN22-OUK.

Suits Nut Diameter: 145. Suits KM Locknuts: KM22. Suits N Lock Nuts: -.
Group: Tools - Hook Spanner

Stock: Backorder



HN2-OUK

Part number HN2-OUK.

Suits Nut Diameter: 25. Suits KM Locknuts: KM2. Suits N Lock Nuts: N02.
Group: Tools - Hook Spanner

Stock: Backorder



HN3-OUK

Part number HN3-OUK.

Suits Nut Diameter: 28. Suits KM Locknuts: KM3. Suits N Lock Nuts: N03.
Group: Tools - Hook Spanner

Stock: Backorder



HN4-OUK

Part number HN4-OUK.

Suits Nut Diameter: 30 - 32. Suits KM Locknuts: KM4. Suits N Lock Nuts: N04.
Group: Tools - Hook Spanner

Stock: Backorder



HN5-6-OUK

Part number HN5-6-OUK.

Suits Nut Diameter: 38 - 45. Suits KM Locknuts: KM5, KM6. Suits N Lock Nuts: N05, N06.
Group: Tools - Hook Spanner

Stock: Backorder



HN5-OUK

Part number HN5-OUK.

Suits Nut Diameter: 38. Suits KM Locknuts: KM5. Suits N Lock Nuts: N05.
Group: Tools - Hook Spanner

Stock: Backorder



HN6-OUK

Part number HN6-OUK.

Suits Nut Diameter: 45. Suits KM Locknuts: KM6. Suits N Lock Nuts: N06.
Group: Tools - Hook Spanner

Stock: Backorder



HN7-OUK

Part number HN7-OUK.

Suits Nut Diameter: 52 - 55. Suits KM Locknuts: KM7. Suits N Lock Nuts: N07.
Group: Tools - Hook Spanner

Stock: Backorder



HN8-OUK

Part number HN8-OUK.

Suits Nut Diameter: 58. Suits KM Locknuts: KM8. Suits N Lock Nuts: N08.
Group: Tools - Hook Spanner

Stock: Backorder



HN910-OUK

Part number HN910-OUK.

Suits Nut Diameter: 65 - 68. Suits KM Locknuts: KM9, KM10. Suits N Lock Nuts: N09, N10.
Group: Tools - Hook Spanner

Stock: Backorder



HN9-OUK

Part number HN9-OUK.

Suits Nut Diameter: 65. Suits KM Locknuts: KM9. Suits N Lock Nuts: N09.
Group: Tools - Hook Spanner

Stock: Backorder


Nuts Lock

Hide Pictures

Go to Top  


Locknuts

Locknuts

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269.

Nuts - Lock - For Bearings - Thin Section

Nuts - Lock - For Bearings - Thin Section

NT/NTH series thin section.

With a smaller OD and thinner section uses less space and weigh less than a standard locknut. Used in aircraft, electronics and small bearing machine tools.

Click for combined categories: All Lock Nuts for Bearings


Nuts - Lock - For Bearings - Metric KMT High Precision

Nuts - Lock - For Bearings - Metric KMT High Precision

High Strength Steel Lock Nut. Phosphated and saturated with oil Finish.

Locking pin is hard drawn brass. Type MT6SS short pin Grub Screw.

Click for combined categories: All Lock Nuts for Bearings


Plungers Ball

Hide Pictures

Go to Top  


Nuts - Lock - For Indexing Plungers

Nuts - Lock - For Indexing Plungers


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Lock - For Bearings - Face

Nuts - Lock - For Bearings - Face


Click for combined categories: All Lock Nuts for Bearings


Nuts - Lock - For Bearings - Left Hand Thread - NL Series

Nuts - Lock - For Bearings - Left Hand Thread - NL Series

NL series used for high rotational parts.


Click for combined categories: All Lock Nuts for Bearings


Nuts - Lock - For Bearings - Peripheral

Nuts - Lock - For Bearings - Peripheral


Click for combined categories: All Lock Nuts for Bearings


Nuts - Hexagonal - Locking

Nuts - Hexagonal - Locking

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.

Click for combined categories: All Lock Nuts


Shock Absorbers

Hide Pictures

Go to Top  


Shock Absorbers - Lock Nuts

Shock Absorbers - Lock Nuts


Click for combined categories: All Shock Absorbers


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Aerotight

Nuts - Aerotight

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.

Click for combined categories: All Lock Nuts


Nuts - Disk Locking

Nuts - Disk Locking

Body: Medium Carbon Steel (1035/45) HRC 26-34. Plating: Zinc ASTM B - 633. Free Spinning (no thread interference) (H6 Tolerance) - One piece assembly - No washer required. Installed with standard equipment, no special tools required - Easy to remove - Reusable. Can be used with Grade 5 (Class 8.8), Grade 8 (Class 10.9) and even stronger bolted.

Click for combined categories: All Lock Nuts


Nuts - Quick Release

Nuts - Quick Release

Metric and UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Grade C

Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Grade C

Prevailing torque locknuts.Zinc gold chromate. Medium carbon steel. For use grade 8 cap screws.

UNC and UNF. Meets or exceeds IFI 100 / 107 and IFI 101 standards.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Binx - Steel

Nuts - Hexagonal - Binx - Steel

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Soc-Lock

Nuts - Hexagonal - Soc-Lock

Stainless Steel. No plastic inserts. All metal locking withstands higher temperatures.


Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Weld - Steel

Nuts - Hexagonal - Weld - Steel

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.


Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Class 10

Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Class 10

Prevailing torque locknuts.Zinc gold chromate. Medium carbon steel. For use with property class 10.9 and 8.8 fasteners.

Metric Only.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Aluminium

Nuts - Hexagonal - Nylon Insert - Aluminium

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Brass

Nuts - Hexagonal - Nylon Insert - Brass

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Steel

Nuts - Hexagonal - Nylon Insert - Steel

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Titanium

Nuts - Hexagonal - Nylon Insert - Titanium

Nylon Insert for Locking. 6AL-4V (Grade 5) High strength titanium alloy. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. 6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Weld - Stainless Steel

Nuts - Hexagonal - Weld - Stainless Steel

Stainless Steel.


Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Binx - Stainless Steel 304

Nuts - Hexagonal - Binx - Stainless Steel 304

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Binx - Stainless Steel 316

Nuts - Hexagonal - Binx - Stainless Steel 316

Manufactured from A4 316 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Stainless Steel

Nuts - Hexagonal - Nylon Insert - Stainless Steel

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Shaftloc

Hide Pictures

Go to Top  


Shaftloc-tm Simple Type M

Shaftloc-tm Simple Type M

Simple effective way to lock components onto shafts.

Passivated 416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. Precision, dynamically balanced and suitable for high speed applications. Diameters A and B concentric within 0.013 T.I.R. Tightening the nut causes slotted sleeve to contract, gripping the shaft and clamping the component to the sleeve.

Click for combined categories: All Shaftloc


Fasteners General

Hide Pictures

Go to Top  


Fasteners - Interlock

Fasteners - Interlock

Specially designed bolts, nuts and washers that have step grooves which lock as you tighten. Almost impossible to loosen with a regular wrench.

Antivibration - loosening resistant - theft resistant. Patented design features bolt, nut and washer with unique wedge shape on opposing sides. Bolts are quickly and easily tightened and loosened using the specially designed trivalent chromium plated steel socket wrench. Fasteners are carbon steel.

Clutches

Hide Pictures

Go to Top  


Clutches - Slip - Inline - Precision

Clutches - Slip - Inline - Precision

Adjustable to 3600 g.cm (50 oz.in) by advancing jam nut and using second jam nut to lock. Adjustment with 7/8 open end wrench (not supplied). Pin and Clamp type hubs.

Click for combined categories: All Slip Clutches


Shaftloc

Hide Pictures

Go to Top  


Shaftloc-tm Sleeves - Double Ended

Shaftloc-tm Sleeves - Double Ended

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Click for combined categories: All Shaftloc


Shaftloc-tm Sleeves - Single Ended

Shaftloc-tm Sleeves - Single Ended

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Click for combined categories: All Shaftloc


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Flange Locking Type

Washers - Disc Spring - Flange Locking Type

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Plungers Indexing

Hide Pictures

Go to Top  


Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

With thermoplastic knob


Click for combined categories: All Indexing Plungers


Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

With thermoplastic knob


Click for combined categories: All Indexing Plungers


Plungers - Indexing - Cam Action - With Hex Nut

Plungers - Indexing - Cam Action - With Hex Nut

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Click for combined categories: All Indexing Plungers


Plungers - Indexing - Cam Action - Without Hex Nut

Plungers - Indexing - Cam Action - Without Hex Nut

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Click for combined categories: All Indexing Plungers


Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut

Plungers - Indexing - Pull Knob - Full 303 Stainless - Locking Slot and Nut


Click for combined categories: All Indexing Plungers


Cross Blocks

Hide Pictures

Go to Top  


Cross Blocks - Heavy Duty - Two Nuts

Cross Blocks - Heavy Duty - Two Nuts

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Cross Blocks - Heavy Duty - One Knob One Nut

Cross Blocks - Heavy Duty - One Knob One Nut

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Screws Panel

Hide Pictures

Go to Top  


Screws - Panel - Jack - Steel

Screws - Panel - Jack - Steel

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.

Click for combined categories: All Panel Screws


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -Tee Handle - Locking

Latches - 1/4 Turn -Tee Handle - Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle - Key Locking - Padlockable

Latches - 1/4 Turn - L Handle - Key Locking - Padlockable

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - Cabinet - Low Profile

Latches - Cabinet - Low Profile

Designed mainly for use on light cabinet doors and panels. A distinctive snap lets user know the latch is fully open or closed. Plug barrel and hex nuts are zinc diecast.

Cam, lock washer and screw are made from steel with a nickel plated finish. Hex type accepts 6.35mm (1/4 inch) hex tool. For use on panels up to 6.35mm (1/4 in.) thick. Straight cams.

Clamps

Hide Pictures

Go to Top  


Clamp Kits - Timing Belt

Clamp Kits - Timing Belt

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -Tee Handle - Non Locking

Latches - 1/4 Turn -Tee Handle - Non Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -L Handle - Coin Proof Slotted

Latches - 1/4 Turn -L Handle - Coin Proof Slotted

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. The slot is recessed so it's inaccessible to a coin, but can be turned with a screwdriver to lock and unlock the handle. For more security there is provision to use a padlock.

Click for combined categories: All Quarter Turn Latches


Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - 16mm Nuts - Pillow Block

Screws - Ball - 16mm Nuts - Pillow Block

Includes ball nut. Match all components within the 16mm range only.

Antibacklash. Repeatability 0.01mm, accuracy 0.1mm/300mm when used with our 16mm screws. Hardened ground and polished Cf53 steel to HRC62 +/-2. Balls hardened HRC63 +/- 2.

Click for combined categories: All Ball Screws


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - Tabbed - Thin

Washers - Lock - Tabbed - Thin

Thin section - use with NT series locknuts.

Use with NT series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Tabbed - Heavy Duty

Washers - Lock - Tabbed - Heavy Duty

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Tabbed - MB Series

Washers - Lock - Tabbed - MB Series

Standard MB series lockwasher for use with bearing locknuts.

Carbon spring steel. Use with N/AN and NL series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -L Handle - Padlockable - 316 Stainless Steel

Latches - 1/4 Turn -L Handle - Padlockable - 316 Stainless Steel

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Plungers Indexing

Hide Pictures

Go to Top  


Plungers - Indexing - Grip - Stainless - With Nut

Plungers - Indexing - Grip - Stainless - With Nut

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Click for combined categories: All Indexing Plungers


Plungers - Indexing - Grip - Stainless - Without Nut

Plungers - Indexing - Grip - Stainless - Without Nut

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Click for combined categories: All Indexing Plungers


Plungers - Indexing - Grip - Steel - With Nut

Plungers - Indexing - Grip - Steel - With Nut

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Click for combined categories: All Indexing Plungers


Plungers - Indexing - Grip - Steel - Without Nut

Plungers - Indexing - Grip - Steel - Without Nut

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.


Click for combined categories: All Indexing Plungers


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn  - L Handle with Pawl - Chrome Finish - Padlockable

Latches - 1/4 Turn - L Handle with Pawl - Chrome Finish - Padlockable

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Locks

Hide Pictures

Go to Top  


Locks - Cam

Locks - Cam


Click for combined categories: All Locks


Reverse Locks

Reverse Locks

The reverse lock is used to hold a door or mechanism in either an open or closed position.

Polycarbonate Plastic. Operating Temperature: 0o to 50oC. The locking point is infinitely variable without adjustment and can be used with a rotary damper to give both a lock and controlled closure rate.

Shaft Locks

Hide Pictures

Go to Top  


Shaft Locks - Potentiometer

Shaft Locks - Potentiometer


Knobs Lock

Hide Pictures

Go to Top  


Handles - Lock - Round

Handles - Lock - Round

Satin Chrome with black plastic grip. Supplied with 2 keys.

Click for combined categories: All Lock Handles

Click for combined categories: All Handles


Handles - Lock - T-Handle

Handles - Lock - T-Handle

Bright Chrome. Supplied complete with a 0.3mm thick nitrile head gasket and 2 keys to differ.

Click for combined categories: All Lock Handles

Click for combined categories: All Handles


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn  - L Handle Defeator - 304 Stainless Steel - Padlockable

Latches - 1/4 Turn - L Handle Defeator - 304 Stainless Steel - Padlockable

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - External Tooth - Spring Steel

Washers - Lock - External Tooth - Spring Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - External Tooth - Stainless Steel

Washers - Lock - External Tooth - Stainless Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Spring Steel

Washers - Lock - Internal Tooth - Spring Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Stainless Steel

Washers - Lock - Internal Tooth - Stainless Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Grade 8

Washers - Lock - Split - Grade 8

Zinc plated


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Stainless Steel

Washers - Lock - Split - Stainless Steel

304 Grade Stainless Steel


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Steel

Washers - Lock - Split - Steel

Plain and zinc plated

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Titanium

Washers - Lock - Split - Titanium

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Latches - 1/4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Pins - Ball Lock

Hide Pictures

Go to Top  


Pins - Ball Lock - Ball Handle - Plastic Handle

Pins - Ball Lock - Ball Handle - Plastic Handle

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Commercial

Pins - Ball Lock - Button Handle - Commercial

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Stainless Steel

Pins - Ball Lock - Button Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Steel

Pins - Ball Lock - Button Handle - Steel

Heat treated 4130 alloy spindle and shank. Handles aluminium.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Double Acting - L-Handle - Stainless Steel

Pins - Ball Lock - Double Acting - L-Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel

Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Economy - Stainless Steel

Pins - Ball Lock - Economy - Stainless Steel

Economical pins that can be used in military or conventional equipment. Type 303 stainless steel.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Stainless steel pins used in aircraft industry, food processing machinery, marine equipment, laboratory and testing equipment. Commercial drill tolerances provide clearance for standard pins. 303 stainless steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Economy - Steel

Pins - Ball Lock - Economy - Steel

Economical pins that can be used in military or conventional equipment.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Flanged Receptacles

Pins - Ball Lock - Flanged Receptacles

Provide a permanent and proper mating hole for commercial and industrial type quick release ball lock pins.

Designed to be used on materials or in applications where the pin does not have anything to lock against. Pin does not protrude past the bottom of the receptacle so they are ideal for blind hole applications. 303 Stainless Steel. Mounted with screws, rivets or bolts. The quick release ball lock pins are inserted from the flanged end, and the ball extends into the wider opening at the top of the receptacle.

Pins - Ball Lock - High Tension - Industrial

Pins - Ball Lock - High Tension - Industrial

17-4 PH or PH15-7MO stainless steel shank. CRES440C stainless steel spindle. Four balls offer greater pullout strength.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - L-Handle - Industrial - Steel

Pins - Ball Lock - L-Handle - Industrial - Steel

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Half Ring Style

Pins - Ball Lock - Marine Style - Half Ring Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Recessed  Head

Pins - Ball Lock - Marine Style - Recessed Head

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Marine Style - Ring Style

Pins - Ball Lock - Marine Style - Ring Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Shackle

Pins - Ball Lock - Shackle

Pins will not release until spindle is depressed. Four balls for high loads. Body and spindle are made from 4130 alloy steel.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Shoulder Type - T Handle

Pins - Ball Lock - Shoulder Type - T Handle

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Commercial

Pins - Ball Lock - T-Handle - Commercial

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Plastic Handle

Pins - Ball Lock - T-Handle - Plastic Handle

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

17-4 PH or PH15-7MO stainless steel spindle and shank. Ground handling pins used in the handling of aircraft and service equipment.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Threaded End - Stainless Steel

Pins - Ball Lock - Threaded End - Stainless Steel

One end threaded so you can attach your own handle or knob.


Click for combined categories: All Ball Lock Pins


Pins - Wirelock

Hide Pictures

Go to Top  


Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel

Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154804 products in 3729 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.