All Items: Linear Bearings - Categories


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Miniature - Super High Precision

Bearings - Linear - Ball - Miniature - Super High Precision

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Aluminium and Plastic - Closed

Bearings - Linear - Aluminium and Plastic - Closed

Metric style does not come with oring grooves.

Operating Temperature -14o to 90o Celius. Anodized Aluminium Body with Polymer J Bearing material. Features include - Self-lubricating, Corrosion and dirt resistant, Maintenance free, Vibration dampening.

Bearings - Linear - Aluminium and Plastic - Open

Bearings - Linear - Aluminium and Plastic - Open

Metric style does not come with oring grooves.

Operating Temperature -14o to 90o Celius. Anodized Aluminium Body with Polymer J Bearing material. Features include - Self-lubricating, Open, anodized aluminum adapter for support shafts, Maintenance free, Secure bearing with set screws (not included).

Bearings - Linear - Ball - Adjustable

Bearings - Linear - Ball - Adjustable

Adjustable type allows you to vary the preload according to your application

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Closed

Bearings - Linear - Ball - Closed

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Miniature - High Precision - Stainless Steel

Bearings - Linear - Ball - Miniature - High Precision - Stainless Steel

Hardened Stainless Steel 440C with resin ball retainer

Recommended shaft 58-64 HRC. +0.000 / -0.006. Recommended Housing +0.012 / -0.000.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Miniature - High Precision - Steel

Bearings - Linear - Ball - Miniature - High Precision - Steel

Hardened Steel with resin ball retainer

Recommended shaft 58-64 HRC. +0.000 / -0.006. Recommended Housing +0.012 / -0.000.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Open

Bearings - Linear - Ball - Open

For running on shafts supported by a rail along their length.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Stainless Steel - Adjustable

Bearings - Linear - Ball - Stainless Steel - Adjustable

Adjustable type allows you to vary the preload according to your application

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Stainless Steel - Closed

Bearings - Linear - Ball - Stainless Steel - Closed

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Precision Steel - Closed

Bearings - Linear - Ball - Thomson Precision Steel - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Precision Steel - Open

Bearings - Linear - Ball - Thomson Precision Steel - Open

For running on shafts supported by a rail along their length.


Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Super - Closed

Bearings - Linear - Ball - Thomson Super - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super - Open

Bearings - Linear - Ball - Thomson Super - Open

For running on shafts supported by a rail along their length.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super Smart - Closed

Bearings - Linear - Ball - Thomson Super Smart - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super Smart - Open

Bearings - Linear - Ball - Thomson Super Smart - Open

For running on shafts supported by a rail along their length.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon Gold Lined - Closed - Precision

Bearings - Linear - Frelon Gold Lined - Closed - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon Gold Lined - Closed - Standard

Bearings - Linear - Frelon Gold Lined - Closed - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon Gold Lined - Open - Precision

Bearings - Linear - Frelon Gold Lined - Open - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon Gold Lined - Open - Standard

Bearings - Linear - Frelon Gold Lined - Open - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon Gold Lined Linear Bearings

Related Information:

Precision Shafting To Suit Bearings


Bearings - Linear - Frelon J Lined - Closed - Precision

Bearings - Linear - Frelon J Lined - Closed - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon J Lined Linear Bearings


Bearings - Linear - Frelon J Lined - Closed - Self Aligning

Bearings - Linear - Frelon J Lined - Closed - Self Aligning

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon J Lined Linear Bearings


Bearings - Linear - Frelon J Lined - Closed - Standard

Bearings - Linear - Frelon J Lined - Closed - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Click for combined categories: All Closed Frelon Lined Linear Bearings

Click for combined categories: All Closed Frelon J Lined Linear Bearings


Bearings - Linear - Frelon J Lined - Open - Precision

Bearings - Linear - Frelon J Lined - Open - Precision

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon J Lined Linear Bearings


Bearings - Linear - Frelon J Lined - Open - Standard

Bearings - Linear - Frelon J Lined - Open - Standard

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Click for combined categories: All Open Frelon Lined Linear Bearings

Click for combined categories: All Open Frelon J Lined Linear Bearings


Bearings - Linear - Plastic - Closed

Bearings - Linear - Plastic - Closed

Operating temp -50 Deg to 90 Deg Celius

Features include - Self lubricating, Corrosion and dirt resistant, Lightweight, Maintenance free, Vibration dampening and Can be secured by a retaining ring (not included). Can be used with aluminum shafting, stainless steel, ceramic, case-hardened steel and chrome plated steel if hardness is below HRC50 and finish is 8-16 RMS.

Bearings - Linear - Sliding - Ceramic Coated

Bearings - Linear - Sliding - Ceramic Coated

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Sliding - Stainless - PTFE - Closed

Bearings - Linear - Sliding - Stainless - PTFE - Closed

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Sliding - Stainless - PTFE - Open

Bearings - Linear - Sliding - Stainless - PTFE - Open

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Click for combined categories: All Linear Ball Bearings


Ball Splines Linear

Hide Pictures

Go to Top  


Linear Ball Splines - Bearings - Flanged

Linear Ball Splines - Bearings - Flanged

Use with Linear Ball Spline Shaft.


Click for combined categories: All Linear Ball Splines


Linear Ball Splines - Bearings - Unflanged

Linear Ball Splines - Bearings - Unflanged

Use with Linear Ball Spline Shaft.


Click for combined categories: All Linear Ball Splines


Bearings Linear

Hide Pictures

Go to Top  


Seals - For Linear Bearings - Closed

Seals - For Linear Bearings - Closed


Click for combined categories: All Oil Seals


Seals - For Linear Bearings - Open

Seals - For Linear Bearings - Open


Click for combined categories: All Oil Seals


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square

Housings - Linear - Square

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Click for combined categories: All Linear Bearing Housings


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Open (Type 1)

Housings - Linear - Open (Type 1)

Bearings not included.

Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Housings - Linear - Open (Type 2)

Housings - Linear - Open (Type 2)

Bearings not included.

Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Housings - Linear - Pillow Block - Closed

Housings - Linear - Pillow Block - Closed

Bearings not included.

NOTE: You may need to use adhesive to hold the bearing securely in place on the 'D' dimension. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. The units can be attached to any surface to offer support in any direction. For use with closed linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Chamfered Edges

Bearings - Chamfered Edges

Chamfered edge bearings for Linear Guide Systems.


Drylin Bearings and Systems

Hide Pictures

Go to Top  


Drylin Linear Assembly Parts - Carriage Only

Drylin Linear Assembly Parts - Carriage Only

Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.

Drylin(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.

Click for combined categories: All Drylin


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Dual Rail

Housings - Linear - Dual Rail

Bearings not included.

Material: Aluminium.

Click for combined categories: All Linear Bearing Housings


Housings - Linear - Square - Clamps

Housings - Linear - Square - Clamps


Click for combined categories: All Linear Bearing Housings


Drylin Bearings and Systems

Hide Pictures

Go to Top  


Drylin Sliding Bearings

Drylin Sliding Bearings

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).

Clamping Rings

Hide Pictures

Go to Top  


Rings - Retaining - C Type External - For Linear Bearings

Rings - Retaining - C Type External - For Linear Bearings

Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.


Drylin Bearings and Systems

Hide Pictures

Go to Top  


Drylin Linear Assembly Parts - Guide Rails Only

Drylin Linear Assembly Parts - Guide Rails Only

These rails require a matching carriage as listed in a separate category. Match by size.

Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.

Click for combined categories: All Drylin


Drylin Linear Assembly Parts - Pinion Assembly Only

Drylin Linear Assembly Parts - Pinion Assembly Only

These pinion assemblies require a matching carriage and rack as listed in separate categories. Match by size.

Pinion Assembly Body: Aluminium. Gear: Stainless steel. Bearings: Steel. Working Temperature Range: 0oC to +60oC. Designed to be attached to TW carriages using specific rack rail.

Click for combined categories: All Drylin


Drylin - Linear - Slides and Carriages - Size 17

Drylin - Linear - Slides and Carriages - Size 17

Linear sliding motion.

Guide Rail Weight: 150 g/m. Carriage Weight: 1.7g. Max Rail Length: 1960 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Click for combined categories: All Drylin


Drylin - Linear - Slides and Carriages - Size 27

Drylin - Linear - Slides and Carriages - Size 27

Linear sliding motion.

Guide Rail Weight: 290 g/m. Carriage Weight: 10.8 or 12.5g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Click for combined categories: All Drylin


Drylin - Linear - Slides and Carriages - Size 80

Drylin - Linear - Slides and Carriages - Size 80

Linear sliding motion.

Guide Rail Weight: 1140 g/m. Carriage Weight: 100g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Click for combined categories: All Drylin


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Thomson Super (Flanged)

Housings - Linear - Thomson Super (Flanged)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Bearings Crossed Roller

Hide Pictures

Go to Top  


Crossed Roller Way

Crossed Roller Way

For precise linear motion.

Maximum Speed: 0.5 m/sec (30m/min). Temperature: +100oC ( Constant), +140oC (Maximum). For temperatures over 100oC we can supply special high temperature grease (200oC - supplied in syringe) CG2-SY.

Drylin Bearings and Systems

Hide Pictures

Go to Top  


Drylin Linear Assembly Parts - Rack and Rail Only

Drylin Linear Assembly Parts - Rack and Rail Only

These rack and rails require a matching carriage and pinion assembly as listed in separate categories. Match by size.

Working Temperature Range: 0oC to +60oC. Available in 500mm lengths. Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Refer to Standard Rail for basic dimensions.

Click for combined categories: All Drylin


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed - Adjustable

Housings - Linear - Pillow Block - Closed - Adjustable

Includes Bearings. Adjustable preload.

Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball BushingTM Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).

Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing


Housings - Linear - Thomson Super Smart (Flanged)

Housings - Linear - Thomson Super Smart (Flanged)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Linear Slides

Hide Pictures

Go to Top  


Slides - Linear - Cross Roller Rail

Slides - Linear - Cross Roller Rail

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.

Click for combined categories: All Linear Slides


Drylin Bearings and Systems

Hide Pictures

Go to Top  


Drylin Sliding Film

Drylin Sliding Film

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J.

Bearings Linear

Hide Pictures

Go to Top  


Bushes - Aluminium - Frelon Lined - Flanged

Bushes - Aluminium - Frelon Lined - Flanged

Self lubricating - Replaces oilite or plastic bearings.

SLIP FIT: Housing bore should be nominal OD +0.050/+0.075 - lock in place with retaining compound or epoxy. PRESS FIT: Housing bore should be nominal OD -0.000/+0.012. Use freezing method for press fit assembly - freeze bearing to -18 oC for 30 minutes. Body: Aluminium. Lining: Frelon.

Click for combined categories: All Aluminium Bushes


Bushes - Aluminium - Frelon Lined - Unflanged

Bushes - Aluminium - Frelon Lined - Unflanged

Self lubricating - Replaces oilite or plastic bearings.

SLIP FIT: Housing bore should be nominal OD +0.050/+0.075 - lock in place with retaining compound or epoxy. PRESS FIT: Housing bore should be nominal OD -0.000/+0.012. Use freezing method for press fit assembly - freeze bearing to -18 oC for 30 minutes. Body: Aluminium. Lining: Frelon.

Click for combined categories: All Aluminium Bushes


Clamping Rings

Hide Pictures

Go to Top  


Rings - Retaining - PR Type Internal - For Linear Bearings

Rings - Retaining - PR Type Internal - For Linear Bearings

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed - Ceramic Coated

Housings - Linear - Pillow Block - Closed - Ceramic Coated

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.

Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing


Housings - Linear - Thomson Super (Pillow Block - Closed)

Housings - Linear - Thomson Super (Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Pillow Block - Open)

Housings - Linear - Thomson Super (Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Linear Slides

Hide Pictures

Go to Top  


Linear Guide System - Two Piece

Linear Guide System - Two Piece

Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.

Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems.

Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Thomson Super Smart (Pillow Block - Closed)

Housings - Linear - Thomson Super Smart (Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Pillow Block - Open)

Housings - Linear - Thomson Super Smart (Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Twin Pillow Block - Closed)

Housings - Linear - Thomson Super (Twin Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Twin Pillow Block - Open)

Housings - Linear - Thomson Super (Twin Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed Adj)

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed Adj)

Includes Bearings. Adjustable preload.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Footed

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Footed

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Solid

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Solid

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open Adj)

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open Adj)

Includes Bearings. Adjustable preload.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Footed

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Footed

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Solid

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Solid

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Ball Splines Linear

Hide Pictures

Go to Top  


Linear Ball Splines - Shaft

Linear Ball Splines - Shaft

Use with either flanged or unflanged Linear Ball Spline Bearings.


Click for combined categories: All Linear Ball Splines

Related Information:
Unflanged Bearings to Suit


Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Utilitrak - CR - Carriage

Linear Slides - Utilitrak - CR - Carriage

Use with Utilitrak CR Channel. Stainless steel wheels with sealed bearings. Match by size.


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Spherical OD

Bearings - Spherical OD

Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems.

Linear Slides

Hide Pictures

Go to Top  


Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Front Disconnect - Lever - Full Ext

Slides - Drawer - Front Disconnect - Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Linear Slides - Cross Roller Tables - Aluminium

Linear Slides - Cross Roller Tables - Aluminium

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Linear Slides - Cross Roller Tables - Steel

Linear Slides - Cross Roller Tables - Steel

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.

Click for combined categories: All Drawer Slides


Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect.

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium - Ceramic Coated

Shafting - Aluminium - Ceramic Coated

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Click for combined categories: All Drawer Slides


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium - Ceramic Coated - Tapped

Shafting - Aluminium - Ceramic Coated - Tapped

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Pre Drilled and Tapped - High Carbon Steel

Shafting - Pre Drilled and Tapped - High Carbon Steel

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.

Click for combined categories: All Shafting

Click for combined categories: All Steel Shafting


Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Shafting - Pre Drilled and Tapped - Stainless Steel Steel

For use with rail supports and open linear bearings


Click for combined categories: All Shafting

Click for combined categories: All Stainless Shafting


Linear Slides

Hide Pictures

Go to Top  


Linear - Mini Rail - Self-Lubricating - Carriage

Linear - Mini Rail - Self-Lubricating - Carriage

Additional carriages for the Mini-Rail system. Match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.

Linear - Mini Rail - Self-Lubricating - Carriage and Rail

Linear - Mini Rail - Self-Lubricating - Carriage and Rail

Comes with one carriage. Spare carriages sold separately - match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments.


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154812 products in 3732 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.