All Items: Levers - Categories


Levers

Hide Pictures

Go to Top  


Levers - Clamp

Levers - Clamp

Steel Parts: Quality class 5.8. Handle: Diecast zinc to DIN 1743 or Glass fibre reinforced plastic with toothed wheel in diecast zinc. Surface Finish: Handle plastic coated. Steel parts black oxide finish.

Click for combined categories: All Levers


Levers - Clamp - Quick Release

Levers - Clamp - Quick Release

Handles: Die-cast zinc or plastic. Internal thread: mechanism made from carbon steel. The thru-hole clamping lever allows for quick clamping on long thread lengths.

Click for combined categories: All Levers


Levers - Control Handles

Levers - Control Handles

Steel Parts: Quality class 5.8. Ball Knob: Black plastic. Surface Finish: Black oxide.

Click for combined categories: All Levers


Levers - Control Handles - Flat

Levers - Control Handles - Flat

Steel Parts: Quality class 5.8. Ball Knob: Black duroplastic FS31 / Surface Finish: Black oxide. Can be used for simpler clamping applications and switching operations. If necessary there must be enough space to turn the handle through an angle of 360o. The star drive hole model is designed to allow turning in steps of 45o.

Click for combined categories: All Levers


Levers - Flat Tension

Levers - Flat Tension

Steel Parts: Quality class 5.8. Ball Knob: Black plastic. Surface Finish: Burnished.

Click for combined categories: All Levers


Levers - Safety Tension

Levers - Safety Tension

Steel Parts: Quality class 5.8. Ball Knob: Black plastic. Surface Finish: Burnished. Press the handle down until the teeth are fully engaged. The object can now be clamped or released. Spring pressure releases the locking mechanism immediately, restoring the safety function (handle can be turned effortlessly).

Click for combined categories: All Levers


Levers - Tension - 0 Degrees

Levers - Tension - 0 Degrees

Steel Parts: Quality class 5.8. Ball Knob: Black plastic. Surface finish: Burnished. Hub machined and bored to ISO fit H7. Choose from 0 or 20o.

Click for combined categories: All Levers


Knobs Lever

Hide Pictures

Go to Top  


Knobs - Lever

Knobs - Lever

Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.

Click for combined categories: All Lever Knobs

Click for combined categories: All Knobs


Fishing Reel Parts

Hide Pictures

Go to Top  


45 GLS Lever Drag Penn Parts

45 GLS Lever Drag Penn Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Latches

Hide Pictures

Go to Top  


Latches - Adjustable Lever

Latches - Adjustable Lever

Die cast zinc with stainless steel springs and roll pins. Available in textured chrome or matte black powder coat. Working load 130kg. Ultimate load 210kg. M5 screws with lock washer supplied. Single hole installation.


Latches - Draw - Lever Assisted - Aerolatch -tm-

Latches - Draw - Lever Assisted - Aerolatch -tm-

Non-corrosive and UV resistant lever assisted draw latch. To operate, align pivot bosses on lever with slots in keeper. Snap lever over keeper detent. Overcentre action and detent keep latch closed. Latch absorbs and reduces vibration.

Base lever and keeper are made from black glass filled nylon. Latch body is thick EPDM rubber. Four mounting holes are designed for 10 gauge screws (not included). Clamp forces listed are for average steady state at room temperatures.

Latches - Small Lever - Locking - Black

Latches - Small Lever - Locking - Black

Black powder coated finish. Includes key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Small Lever - Locking - Chrome

Latches - Small Lever - Locking - Chrome

Includes key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Small Lever - Non Locking - Black

Latches - Small Lever - Non Locking - Black

Black powder coated finish.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Small Lever - Non Locking - Chrome

Latches - Small Lever - Non Locking - Chrome

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Linear Slides

Hide Pictures

Go to Top  


Slides - Drawer - Front Disconnect - Lever - Full Ext

Slides - Drawer - Front Disconnect - Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock

Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Lock in or lock out. 25.4mm over travel. 12.7mm side space.

Click for combined categories: All Drawer Slides


Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out

Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Lock out only. 25.4mm over travel. 12.7mm side space.

Click for combined categories: All Drawer Slides


Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext

Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Non locking. 19.1mm side space.

Click for combined categories: All Drawer Slides


Slides - Drawer - Light Duty - Lever Disconnect

Slides - Drawer - Light Duty - Lever Disconnect

Used for desks, credenzas and cabinets.

Low profile. Hold in detent. Includes 32mm hole pattern as well as traditional hole pattern.

Click for combined categories: All Drawer Slides


Slides - Drawer - Medium Duty - Lever Disconnect

Slides - Drawer - Medium Duty - Lever Disconnect

Used for shallow drawers, tool chests and medical carts.

Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.

Click for combined categories: All Drawer Slides


Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Latches

Hide Pictures

Go to Top  


Latches - Adjustable - Catchbolt -tm-

Latches - Adjustable - Catchbolt -tm-

Holds firmly in three directions. Initial action pulls two parts together. As lever is latched an integral deadbolt slides into keeper forcing a panel or door to stay firmly in place with no movement in any direction.

Six mounting holes ar 4mm diameter. Latch height when closed is 18mm. 302/304 Stainless Steel.

Measuring Equipment

Hide Pictures

Go to Top  


Position Indicators - Digital - Clamping Plates

Position Indicators - Digital - Clamping Plates

Housing: Aluminium, anodised. Clamping Lever: Plastic, snap in. A combination of the digital indicator with this practical accessory forms a reliable shaft clamp. Without additional design work it is possible to prevent automatic shaft movements in a fast and secure way. For shaft diameters 8 to 20 mm.

Handles

Hide Pictures

Go to Top  


Handles - Adjustable - Stud

Handles - Adjustable - Stud

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.

Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Round - Bolt On

Suspension Units - Rubber - Round - Bolt On

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Round - Insert Type

Suspension Units - Rubber - Round - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Square - Bolt On

Suspension Units - Rubber - Square - Bolt On

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Square - Insert Type

Suspension Units - Rubber - Square - Insert Type

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Rectangular - Bolt On

Suspension Units - Rubber - Rectangular - Bolt On

Housing (up to DOA45): Light Alloy (DOA50): spheroidal graphite cast iron. Rubber: Black, hardness 70 Shore A. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30oC / Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Rectangular - Insert Type

Suspension Units - Rubber - Rectangular - Insert Type

Housing (up to DOS45): Light Alloy (DOS50): spheroidal graphite cast iron. Rubber: Black, hardness 70 Shore A. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30oC / Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154804 products in 3729 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.