Quick Delivery Items: Leads And Connectors - Small Parts And Bearings Categories

FOUND IN PARTS DATABASE:- The item was found in our part numbers and descriptions database. Click Here to show the parts found.



Leads and Connectors

Hide Pictures

Go to Top  


Leads - Hobby

Leads - Hobby

Adaptor leads for batteries, battery chargers, servos and receivers including Tamiya, Deans and Losi plugs.

Includes Deans and T Connectors.

Locking Assemblies

Hide Pictures

Go to Top  


Connectors - Hub - Locking

Connectors - Hub - Locking

For fast and accurate positioning and locking of components on shafts.

Fast and frequent mounting and dismounting with only one screw. No axial movement when mounted. Uniform surface pressure against shaft component prevents damage to these parts. Temperature range Minus 30 Deg C to Plus 82 Deg C. Double walled sleeve expands when the pressure screw is tightened to the specified torque. Dismantled easily by releasing pressure on the screw.

Batteries

Hide Pictures

Go to Top  


Batteries - Hobby - Lead Acid

Batteries - Hobby - Lead Acid

All types of Lead Acid Battery


Belts Rounthane

Hide Pictures

Go to Top  


Belts - Rounthane - Connectors

Belts - Rounthane - Connectors

Joinable belting connectors.


Framing

Hide Pictures

Go to Top  


Automat - Frame Kit Connectors

Automat - Frame Kit Connectors

See PDF file in FTP Directory for more information. Educational tool suitable for mechanical teaching institutions.


Click for combined categories: All Automat Frame Components

Related Information:
See all Automat Categories


Ball Screws

Hide Pictures

Go to Top  


Ballscrew - Ground - Dia 4mm - Lead 1mm

Ballscrew - Ground - Dia 4mm - Lead 1mm

Not for sale outside of Australia and New Zealand


Click for combined categories: All Ball Screws


Ballscrew - Rolled - Dia 5mm - Lead 4mm

Ballscrew - Rolled - Dia 5mm - Lead 4mm

Not for sale outside of Australia and New Zealand


Click for combined categories: All Ball Screws


Yoke Ends

Hide Pictures

Go to Top  


Yoke Ends - Blank

Yoke Ends - Blank

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Click for combined categories: All Yoke Ends

Related Information:
Other Clevis Joints

Other Clevis Pins


Yoke Ends - Threaded

Yoke Ends - Threaded

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Click for combined categories: All Yoke Ends

Related Information:
Other Clevis Joints

Other Clevis Pins


Ball Screws

Hide Pictures

Go to Top  


Ballscrew - Ground - Bi-Directional - Dia 8mm - Lead 1mm

Ballscrew - Ground - Bi-Directional - Dia 8mm - Lead 1mm

Not for sale outside of Australia and New Zealand


Click for combined categories: All Ball Screws


Ballscrew - Ground - Bi-Directional - Dia 8mm - Lead 2mm

Ballscrew - Ground - Bi-Directional - Dia 8mm - Lead 2mm

Not for sale outside of Australia and New Zealand


Click for combined categories: All Ball Screws


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nut Flanges for Acme Nuts

Leadscrew Nut Flanges for Acme Nuts

Flanges for Acme leadscrew thread nuts imperial

These flanges are screwed onto the outer thread of the red leadscrew nuts. This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved.

Click for combined categories: All Leadscrew Nut Flanges

Related Information:
Imperial Acme Nuts


Leadscrew Nuts - Imperial - Acme - Bronze

Leadscrew Nuts - Imperial - Acme - Bronze

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Imperial Leadscrew Nuts

Related Information:
Imperial Acme Nut Flanges


Leadscrew Nuts - Imperial - Acme - Plastic

Leadscrew Nuts - Imperial - Acme - Plastic

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Imperial Leadscrew Nuts

Related Information:
Imperial Acme Nut Flanges


Leadscrew Nuts - Imperial - Supernuts - Acme

Leadscrew Nuts - Imperial - Supernuts - Acme

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Imperial Leadscrew Nuts


Leadscrew Nuts - Metric - Flanged - Plastic

Leadscrew Nuts - Metric - Flanged - Plastic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300. Single Start / Right Hand.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Rolled Leadscrew

Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Hexagonal - Metallic

Leadscrew Nuts - Metric - Hexagonal - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Round - Metallic

Leadscrew Nuts - Metric - Round - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Square - Metallic

Leadscrew Nuts - Metric - Square - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Leadscrew Nuts - Metric - Supernuts - Acme

Leadscrew Nuts - Metric - Supernuts - Acme

Acme Leadscrew Nuts - Use with Acme Leadscrew Thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts


Leadscrews - Imperial - Acme - Alloy Steel

Leadscrews - Imperial - Acme - Alloy Steel

Acme Leadscrew Thread - Use with Acme Supernuts

Alloy steel heat treated to RC 56-60.

Click for combined categories: All Leadscrews

Click for combined categories: All Imperial Leadscrews

Related Information:
Imperial Acme Nut Flanges


Leadscrews - Imperial - Acme - Stainless Steel 18.8

Leadscrews - Imperial - Acme - Stainless Steel 18.8

Acme Leadscrew Thread - Use with Acme Supernuts


Click for combined categories: All Leadscrews

Click for combined categories: All Imperial Leadscrews

Related Information:
Imperial Acme Nut Flanges


Leadscrews - Metric - Acme

Leadscrews - Metric - Acme

Acme Leadscrew Thread - Use with Acme Supernuts


Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews


Leadscrews - Metric - Rolled Thread - Carbon Steel

Leadscrews - Metric - Rolled Thread - Carbon Steel

Trapezoidal thread design. Use with metric leadscrew nuts listed in separate category.

Carbon Steel C35. For power transmission and continuous use always use bronze nuts - never steel. Nuts and screws should always be lubricated with grease or oil. Steel nuts with steel screws should only be used for hand motion. Efficiency Guide 20 percent with lubrication for single start.

Click for combined categories: All Leadscrews

Click for combined categories: All Metric Leadscrews

Related Information:
Metric Nuts


Belts Rounthane

Hide Pictures

Go to Top  


Belts - Rounthane

Belts - Rounthane

Joinable belting.

Join with Rounthane Connectors (purchased separately). Material : Non Slip Polyurethane. Use with grooved idler pulleys or 6.35mm Top Width V Pulleys. Purchased per 305mm (1 foot). Orders for more than 1 foot will be supplied as a continuous length.

Related Information:
Rounthane Connectors


Leadscrew Actuators

Hide Pictures

Go to Top  


Actuator - Leadscrew - Nuts

Actuator - Leadscrew - Nuts

Related Information:
Actuator - Leadscrew - Medium Duty

Actuator - Leadscrew - High Duty


Balsa

Hide Pictures

Go to Top  


Balsa Wood - Leading Edge

Balsa Wood - Leading Edge

Leading edge for aircraft use.

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Bushes Bronze

Hide Pictures

Go to Top  


Bushes - Bronze - Solid - Leaded Gunmetal

Bushes - Bronze - Solid - Leaded Gunmetal

Solid precision leaded gunmetal bronze bushes. Either LG2 (C83600A) or C93200 as indicated in the listings.

Composition (Approx.) : Copper 85%, Tin 5%, Zinc 5%, Lead 5%. Hardness : 70-90 BHN.

Click for combined categories: All Bronze Bushes

Click for combined categories: All Flanged Bronze Bushes

Related Information:
Sintered Bronze Bushes


Gears Metric Worms

Hide Pictures

Go to Top  


Worms - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Worms - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Match with metallic worms Module 0.80 Series 2.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Worm Gears - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Match with metallic worms Module 0.80 Series 2.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Gears Imperial Worms

Hide Pictures

Go to Top  


Worms - 24 Pitch (Series 1) - Metallic

Worms - 24 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 1) - Plastic

Worms - 24 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 2) - Metallic

Worms - 24 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 3) - Metallic

Worms - 24 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 1) - Metallic

Worms - 32 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 1) - Plastic

Worms - 32 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 2) - Metallic

Worms - 32 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 2) - Plastic

Worms - 32 Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 3) - Metallic

Worms - 32 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 15.95o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 1) - Metallic

Worms - 48 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 1) - Plastic

Worms - 48 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 2) - Metallic

Worms - 48 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 3) - Metallic

Worms - 48 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.7o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 3) - Plastic

Worms - 48 Pitch (Series 3) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 4) - Metallic

Worms - 48 Pitch (Series 4) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 5) - Metallic

Worms - 48 Pitch (Series 5) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 6) - Metallic

Worms - 48 Pitch (Series 6) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 64 Pitch (Series 1) - Metallic

Worms - 64 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 64 Pitch (Series 2) - Metallic

Worms - 64 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 64 Pitch (Series 3) - Metallic

Worms - 64 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 7.12o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 15.95o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.7o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 7.12o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Gears Metric Worms

Hide Pictures

Go to Top  


Worms - Module 3 (Series 1) - Metallic - Left Hand

Worms - Module 3 (Series 1) - Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 3 (Series 1) - Metallic - Right Hand

Worms - Module 3 (Series 1) - Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 3 (Series 1) - Metallic - Left Hand

Worm Gears - Module 3 (Series 1) - Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 3 (Series 1) - Metallic - Right Hand

Worm Gears - Module 3 (Series 1) - Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worms - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worms - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worms - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worms - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worms - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worms - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worms - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worms - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worms - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worm Gears - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worm Gears - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - Nook Series - Right Hand

Screws - Ball - Nook Series - Right Hand

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

High quality alloy steel, induction hardened to RC 56-60. Protective black oxide finish. Lead accurate by at least 0.00083mm per mm.

Dubro Accessories

Hide Pictures

Go to Top  


Dubro Accessories Listed by Description

Dubro Accessories Listed by Description

Accessories for model airplanes and other hobbies.

Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.

Linear Slides

Hide Pictures

Go to Top  


Posi Drive Stage - Ball Slide

Posi Drive Stage - Ball Slide

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

Click for combined categories: All Posi-Drive Stages


Posi Drive Stage - Crossed Roller

Posi Drive Stage - Crossed Roller

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

Click for combined categories: All Posi-Drive Stages


Spacers

Hide Pictures

Go to Top  


Spacers - Hex - Threaded - Steel

Spacers - Hex - Threaded - Steel

Threaded Hex Spacers. Also known as coupling nuts, joiner or connector.


Click for combined categories: All Hex Spacers


Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Bronze - LG2 (Standard)

Rod - Round - Bronze - LG2 (Standard)

Leaded Gunmetal Bronze. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Longer lengths available on special request. Composition (Approx.) : Copper 85%, Tin 5%, Zinc 5%, Lead 5%. AS1565-83600 / Hardness : 70-90 BHN. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155215 products in 3613 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.