Insert Bearings And Housings - Small Parts And Bearings Categories


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Plastic

Housings - Bearing - Pillow Block - Plastic

Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Bearings for Plastic Housings


Housings - Bearing - Flanged - Square - Plastic

Housings - Bearing - Flanged - Square - Plastic

Use with steel, plastic or stainless steel bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Other Bearings to Suit


Bearings for Housings

Hide Pictures

Go to Top  


Bearings - For Cast Iron Housings

Bearings - For Cast Iron Housings

Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - For Pressed Metal Housings

Bearings - For Pressed Metal Housings

Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.

Related Information:
Three Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Cast Iron

Housings - Bearing - Pillow Block - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Offset - Cast Iron

Housings - Bearing - Flanged - Offset - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Round - Cast Iron

Housings - Bearing - Flanged - Round - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Square - Cast Iron

Housings - Bearing - Flanged - Square - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Load and speed capability depend on the bearing used. Use with steel or plastic bearing inserts for plastic housings.

Related Information:
Other Bearings to Suit


Housings - Bearing - Pillow Block - Pressed Metal

Housings - Bearing - Pillow Block - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Bearings for Housings

Hide Pictures

Go to Top  


Bearings - Acetal - Solid - For Plastic Housings

Bearings - Acetal - Solid - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Tapped Base Unit - Stainless

Housings - Bearing - Tapped Base Unit - Stainless

Full stainless steel bearing units are the best solution for hostile chemical washdown applications. All metal bearing insert components are a combination of 302, 304 and 440 stainless steel. Seals are silicone rubber. Grease is H-1 food grade.

Operating temperature minus 20 deg C to +120 deg C. Solid 304 stainless housings have a machined base and extremely smooth surface finish, essential for demanding washdown installations. These housings do not experience flaking, cracking or discolouration and are virtually unaffected by scrapes. Bearings are removable. Food grade.

Bearings for Housings

Hide Pictures

Go to Top  


Bearings - 316 Stainless Steel - For Plastic Housings

Bearings - 316 Stainless Steel - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - Acetal with Stainless Balls - For Plastic Housings

Bearings - Acetal with Stainless Balls - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Nylon with Stainless Bearing

Housings - Bearing - Pillow Block - Nylon with Stainless Bearing

Moulded Nylon 101 Housing with 440C Stainless Bearing.

Bearing block: Nylon / Bearing: 440C Stainless / Insert: 52100 Chrome Steel. High Performance. Housing is Electrically Insulating. Not intended for precision applications. Inner assembly not fixed in place. Can be used as a floating assembly or fixed using conventional adhesives or circlips.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Square - Miniature

Housings - Bearing - Square - Miniature

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Die Cast

Housings - Bearing - Pillow Block - Die Cast

Zinc Die Cast Housings with or without Sintered Bronze Bearings.

Lubricable. With or without standard sintered bronze bearings.

Click for combined categories: All Housings with Integral Bearing


Bearings Housings

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Miniature

Housings - Bearing - Pillow Block - Miniature

Aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Miniature - Self Aligning

Housings - Bearing - Flanged - Miniature - Self Aligning

Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pedestal - Miniature - Self Aligning

Housings - Bearing - Pedestal - Miniature - Self Aligning

Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing

Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing

Flanged Ertalyte Bearing in Moulded Nylon 101 Housing.

Self-Lubricating. High Performance. Electrically Insulating.

Click for combined categories: All Housings with Integral Bearing


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Single Assembly

Housings - Bearing - Single Assembly

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - W300

Housings - Bearing - Flanged - Square - W300

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 Deg C to +180 Deg C.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Flanged - 2 Bolt Hole - W300

Housings - Bearing - Flanged - 2 Bolt Hole - W300

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Bronze Bearing

Housings - Bearing - Pillow Block - Bronze Bearing

Aluminium with 5 percent self aligning sintered bronze bearing.

Bearing: Bronze SAE 840 (oil impregnated). / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. The performance of a plain bearing is stated as a PV value, which is the product of a pressure and velocity.

Click for combined categories: All Housings with Integral Bearing


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Double Assembly - Circlip Retained

Housings - Bearing - Double Assembly - Circlip Retained

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings - Bearing - Single Assembly - Circlip Retained

Housings - Bearing - Single Assembly - Circlip Retained

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - PTFE Bronze Bearing

Housings - Bearing - Pillow Block - PTFE Bronze Bearing

Aluminium with 5 percent self aligning sintered bronze bearing and PTFE solid lubricant.

Bearing: Bronze PTFE impregnated. / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. Operating temperature minus 201 to plus 282o Celsius (minus 330 to plus 540o Farenheit).

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Needle Roller Bearing

Housings - Bearing - Pillow Block - Needle Roller Bearing

Aluminium with 5 percent self aligning drawn cup needle roller bearing.

Bearing: Drawn cup needle roller. / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 58 HRC (Rockwell C). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food Grade.

Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food grade.

Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Miniature

Housings - Bearing - Flanged - Miniature

Chromic Anodised Aluminium double or single flanged housings.

For standard radial ball bearings.

Housings - Bearing - Hanger - Miniature

Housings - Bearing - Hanger - Miniature

Chromic Anodised Aluminium hanger housings.

For standard radial ball bearings.

Housings - Bearing - 2 Bolt Mounting Plates

Housings - Bearing - 2 Bolt Mounting Plates

Chromic Anodised Aluminium mounting plates.

For standard radial ball bearings.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Bronze Bearing

Housings - Bearing - Flanged - Bronze Bearing

5o Static Alignment.

Bearing: Bronze SAE 840 (oil impregnated). Housing: Sintered Aluminium. Bearing Retainer: Outer retainer is steel (which is clinched into Aluminium housing) with a Nylon washer on first face. Apply appropriate factor of safety to the nominal loads and speeds specified. Mating shaft rec. Min. 100 HRB. Max surface finish 16 RMS. Rec. shaft clearance 0.013 - 0.038mm.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Thermoplastic - W300

Housings - Bearing - Pillow Block - Thermoplastic - W300

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 deg C to +130 deg C. Max. Static Tensile Strength is Long Term. Info for Short Term also available.

Click for combined categories: All Housings with Integral Bearing


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C.

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C.

Bearings - Self Clinching - Miniature - Self Aligning

Bearings - Self Clinching - Miniature - Self Aligning

Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 Deg C to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.

Click for combined categories: All Housings with Integral Bearing


Bearings Mounted

Hide Pictures

Go to Top  


Bearings - Spyraflo - Self Clinching - Non Aligning

Bearings - Spyraflo - Self Clinching - Non Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Bearings - Spyraflo - Self Clinching - Self Aligning

Bearings - Spyraflo - Self Clinching - Self Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Flat Race Type

Bearings - Thrust - Ball - Flat Race Type

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Grooved Race Type

Bearings - Thrust - Ball - Grooved Race Type

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Open (Type 2)

Housings - Linear - Open (Type 2)

Bearings not included.

Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Thread Repair - Helicoil

Inserts - Thread Repair - Helicoil

Replacement helicoil inserts for after you have purchased a starter kit or tools separately.

Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.

Click for combined categories: All Helicoil Inserts and Kits


Inserts - Thread Repair - Recoil

Inserts - Thread Repair - Recoil

Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.

Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

Click for combined categories: All Recoil Inserts and Kits


Inserts - Rivet Nuts - Klik - Ribbed

Inserts - Rivet Nuts - Klik - Ribbed

Individual Inserts for use with the Klik Thread Setter Tool

These blind thread inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Expansion - Press In - Brass

Inserts - Expansion - Press In - Brass

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.

Material : Brass. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

Click for combined categories: All Expansion Inserts


Inserts - Rivet Nuts - Klik - Standard

Inserts - Rivet Nuts - Klik - Standard

Individual Inserts for use with the Klik Thread Setter Tool

These inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Inserts - Rivet Nuts - Klik - Threadsert

Inserts - Rivet Nuts - Klik - Threadsert

Individual Inserts for use with the Klik Thread Setter Tool

These inserts can be used in blind or through hole applications. Can be used in almost any material over 0.8mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material.

Click for combined categories: All Klik Rivet Nuts

Related Information:
Mandrels and Nosepieces


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Thomson Super (Flanged)

Housings - Linear - Thomson Super (Flanged)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed

Housings - Linear - Pillow Block - Closed

Bearings not included.

NOTE: You may need to use adhesive to hold the bearing securely in place on the 'D' dimension. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. The units can be attached to any surface to offer support in any direction. For use with closed linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Self Tapping - For Plastics - Steel

Inserts - Self Tapping - For Plastics - Steel

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from steel with zinc chromate finish.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Hex Drive

Inserts - Self Tapping - For Wood - Hex Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Tools - Thread Insert - Power Drive - EZ-Lok

Tools - Thread Insert - Power Drive - EZ-Lok

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.

Click for combined categories: All Tools


Inserts - Expansion - Press In - Brass - Flanged

Inserts - Expansion - Press In - Brass - Flanged

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.


Click for combined categories: All Expansion Inserts


Inserts - Self Tapping - For Aluminium - Steel

Inserts - Self Tapping - For Aluminium - Steel

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive

Inserts - Self Tapping - For Wood - Slotted Drive

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with soft plastics, hard and soft wood, particle board.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Thread Repair - EZ-Lok - Individual Kits

Inserts - Thread Repair - EZ-Lok - Individual Kits

Contains 20 inserts per kit along with a standard tap, drill bit and installation tool. Installation tool is not needed but will make multiple installations easier.

Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.

Click for combined categories: All EZ Lok inserts and Kits


Inserts - Thread Repair - Keylocking Starter Sets

Inserts - Thread Repair - Keylocking Starter Sets

Keylocking inserts are used to repair threads by tapping the worn thread to a standard larger thread, twisting the insert into place and then driving in the keys to lock the insert. Also known as keenserts.

Each kit contains an installation tool and the quantity of inserts shown. One size per kit. Also known as keenserts, keylocking inserts are available in mild steel and stainless steel.

Click for combined categories: All Keylocking Inserts and Kits


Inserts - Thread Repair - Recoil Starter Sets

Inserts - Thread Repair - Recoil Starter Sets

Recoil inserts are screwed directly into an enlarged tapped hole. A tap and installation tool is included with these kits.

Stainless inserts. Contents: Ground intermediate (2nd) tap. Inserts. Installation/tang break off tool. Full instructions. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.

Click for combined categories: All Recoil Inserts and Kits


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed - Adjustable

Housings - Linear - Pillow Block - Closed - Adjustable

Includes Bearings. Adjustable preload.

Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball BushingTM Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).

Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing


Housings - Linear - Thomson Super Smart (Flanged)

Housings - Linear - Thomson Super Smart (Flanged)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Expansion - Press In - 303 Stainless - Flanged

Inserts - Expansion - Press In - 303 Stainless - Flanged

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.


Click for combined categories: All Expansion Inserts


Inserts - Expansion - Press In - 303 Stainless Steel

Inserts - Expansion - Press In - 303 Stainless Steel

Use for cored or drilled holes in plastics. Designed to replace molded in inserts and threads in plastic casings.

Material : 303 Stainless Steel. Easiest inserts to install - simply push into a pre-moulded hole. Used with plastics or other materials. Material must be strong enough to withstand the expansion of the insert. The insertion of the screw locks the external knurls into the wall of the hole. Provides excellent thread durability but where maximum strength is required other inserts shown in this catalogue should be preferred.

Click for combined categories: All Expansion Inserts


Inserts - Self Tapping - For Aluminium - Stainless 303

Inserts - Self Tapping - For Aluminium - Stainless 303

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Plastics - Stainless 303

Inserts - Self Tapping - For Plastics - Stainless 303

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Inserts - Self Tapping - For Wood - Hex Drive - Flanged

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Wood - Slotted Drive - Short

Inserts - Self Tapping - For Wood - Slotted Drive - Short

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Brass. Install with a screwdriver. Superior holding power in hard and soft woods, particle board and other wood products. Long pilot assists with straight driving into a drilled hole.

Click for combined categories: All Self Tapping Inserts for Wood

Click for combined categories: All Self Tapping Inserts


Inserts - Thread Repair - Helicoil Extracting Tools

Inserts - Thread Repair - Helicoil Extracting Tools

Extracting tools are used to remove helicoil inserts. This is done by applying the tool to the insert, striking the tools head and turning it counter-clockwide.


Inserts - Thread Repair - Helicoil Installation Tools

Inserts - Thread Repair - Helicoil Installation Tools

Tools for helicoil inserts include economy style and production style prewinder and threaded mandrel types


Inserts - Thread Repair - Helicoil Tang Breakoff Tools

Inserts - Thread Repair - Helicoil Tang Breakoff Tools

The driving tangs of helicoil inserts must be removed to prevent interference with the end of the assembled screw. For inserts over 1/2 inch use long nosed pliers.


Inserts - Thread Repair - Keylocking Insertion Tools

Inserts - Thread Repair - Keylocking Insertion Tools

Used to insert keylocking inserts - keensert style. Keylocking inserts can be wound in without these tools but the tools make the job much easier. Also known as keenserts.


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Thomson Super (Pillow Block - Closed)

Housings - Linear - Thomson Super (Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Pillow Block - Open)

Housings - Linear - Thomson Super (Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Twin Pillow Block - Open)

Housings - Linear - Thomson Super (Twin Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Pillow Block - Closed)

Housings - Linear - Thomson Super Smart (Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Pillow Block - Open)

Housings - Linear - Thomson Super Smart (Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Twin Pillow Block - Closed)

Housings - Linear - Thomson Super (Twin Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Footed

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Footed

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Footed

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Footed

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Bearings for Skating

Hide Pictures

Go to Top  


Skate Bearings

Skate Bearings

Bearings for use with skates and skate boards.


Bearings for Wheelbarrows

Hide Pictures

Go to Top  


Bearings - Unground

Bearings - Unground

Unground bearings used in trolleys, prams and wheel barrow wheels


Bearings One Way Clutch

Hide Pictures

Go to Top  


Bearings - One Way - Roller

Bearings - One Way - Roller

Roller Clutch Bearings rotate in one direction only.

Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.

Click for combined categories: All One Way Clutch Bearings


Bearings Scale

Hide Pictures

Go to Top  


Bearings - Precision Scale

Bearings - Precision Scale

Bearings for scales.

Note! Minimum quantities apply to production of these items.

Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Chrome Steel

Bearings - Ball - Chrome Steel

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.