Imperial Pinion Wire - Small Parts And Bearings Categories


We are currently closed for stocktake and Easter. Online, e-mail and fax orders placed during this time will be processed on Tuesday 22nd April. Please have a Happy Easter.



Pinion Wire Imperial

Hide Pictures

Go to Top  


Gears - Pinion Wire - 24 Diametrical Pitch

Gears - Pinion Wire - 24 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Gears - Pinion Wire - 32 Diametrical Pitch

Gears - Pinion Wire - 32 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Gears - Pinion Wire - 48 Diametrical Pitch

Gears - Pinion Wire - 48 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Gears - Pinion Wire - 64 Diametrical Pitch

Gears - Pinion Wire - 64 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Pinion Wire Metric

Hide Pictures

Go to Top  


Gears - Pinion Wire - Module 0.4

Gears - Pinion Wire - Module 0.4

Brass

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Metric Pinion Wire


Gears - Pinion Wire - Module 0.5

Gears - Pinion Wire - Module 0.5

Brass

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Metric Pinion Wire


Gears - Pinion Wire - Module 0.8

Gears - Pinion Wire - Module 0.8

Brass

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Metric Pinion Wire


Pins - Taper

Hide Pictures

Go to Top  


Pins - Taper - Imperial - Miniature

Pins - Taper - Imperial - Miniature

Imperial Sizes 1:48 Taper (1/4 in. per foot). Miniature sizes. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Pins - Taper - Imperial - Standard

Pins - Taper - Imperial - Standard

Imperial Sizes 1:48 Taper (1/4 in. per foot). Standard sizes numbers 0 to 14. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Shim

Hide Pictures

Go to Top  


Shims - Slotted - Imperial Sizes

Shims - Slotted - Imperial Sizes

Stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.


Click for combined categories: All Shim

Click for combined categories: All Slotted Shim


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Imperial - Acme

Leadscrew Nuts - Imperial - Acme

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Imperial Leadscrew Nuts

Related Information:
Imperial Acme Nut Flanges


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty

Springs - Die - Imperial - Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty

Springs - Die - Imperial - Medium Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Imperial - Supernuts - Acme

Leadscrew Nuts - Imperial - Supernuts - Acme

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Imperial Leadscrew Nuts


Leadscrews - Imperial - Acme - Alloy Steel

Leadscrews - Imperial - Acme - Alloy Steel

Acme Leadscrew Thread - Use with Acme Supernuts

Alloy steel heat treated to RC 56-60.

Click for combined categories: All Leadscrews

Click for combined categories: All Imperial Leadscrews

Related Information:
Imperial Acme Nut Flanges


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Extra Heavy Duty

Springs - Die - Imperial - Extra Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium-Heavy Duty

Springs - Die - Imperial - Medium-Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Leadscrews

Hide Pictures

Go to Top  


Leadscrews - Imperial - Acme - Stainless Steel 18.8

Leadscrews - Imperial - Acme - Stainless Steel 18.8

Acme Leadscrew Thread - Use with Acme Supernuts


Click for combined categories: All Leadscrews

Click for combined categories: All Imperial Leadscrews

Related Information:
Imperial Acme Nut Flanges


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty - Chrome Silicon

Springs - Die - Imperial - Medium Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Mounts Leveling

Hide Pictures

Go to Top  


Mounts - Leveling - Stud Type - Gold Chromate - Imperial

Mounts - Leveling - Stud Type - Gold Chromate - Imperial

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Nickel Plated - Imperial

Mounts - Leveling - Stud Type - Nickel Plated - Imperial

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Stainless Steel - Imperial

Mounts - Leveling - Stud Type - Stainless Steel - Imperial

Good quality with value pricing. 303 stainless steel.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafts - Pinion

Shafts - Pinion


Click for combined categories: All Shafts


Rope and Cable

Hide Pictures

Go to Top  


Attachments - Wire Rope Clips

Attachments - Wire Rope Clips


Click for combined categories: All Cable Attachments


Actuators

Hide Pictures

Go to Top  


Actuator Box - Rack and Pinion - Size 16

Actuator Box - Rack and Pinion - Size 16

Precision low backlash actuator boxes.

Case: AA15 Red Anodised Aluminum (6082-T6). Rack and Pinion: High Carbon Steel 817M40 (EN24). Backlash: 2o. Travel: 25mm travel = 204.8o pinion rotation on input : 1mm travel = 8.19o pinion rotation on input. Lubrication: Greased for life - Shell Nerita Grease HV.

Click for combined categories: All Actuator Boxes


Hooks

Hide Pictures

Go to Top  


Slings - Wire Rope - Permaloc®

Slings - Wire Rope - Permaloc®

For general purpose lifting in environments too rugged for synthetic slings. Tuff-Tag identification on every sling for capacity ratings.


Spring Wire

Hide Pictures

Go to Top  


Wire - Steel - Brass

Wire - Steel - Brass

Brass

Shipped in straight lengths on wood backing board.

Click for combined categories: All Spring Wire


Wire - Steel - 302 Stainless

Wire - Steel - 302 Stainless

302 Stainless Steel


Click for combined categories: All Spring Wire


Wire - Steel - Spring - Music - Coils

Wire - Steel - Spring - Music - Coils

SAE 1090 Spring Steel.


Click for combined categories: All Spring Wire


Wire - Steel - Spring - Music Wire - Short Lengths

Wire - Steel - Spring - Music Wire - Short Lengths

SAE 1090 Spring Steel.

Shipped in straight lengths on wood backing board.

Click for combined categories: All Spring Wire


Tools Bending

Hide Pictures

Go to Top  


Tools - Wire Working

Tools - Wire Working

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.

Click for combined categories: All Tools


Snaps

Hide Pictures

Go to Top  


Snaps - Steel Wire - Bit

Snaps - Steel Wire - Bit

Zinc Plated


Snaps - Steel Wire - Bodies

Snaps - Steel Wire - Bodies

Nickel Plated


Snaps - Steel Wire - Open Swivel

Snaps - Steel Wire - Open Swivel

Zinc Plated


Snaps - Steel Wire - Swivel Eye

Snaps - Steel Wire - Swivel Eye

Nickel Plated


Springs Extension

Hide Pictures

Go to Top  


Springs - Extension - Music Wire

Springs - Extension - Music Wire

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 Deg C (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 Deg C (500 Deg F). 302 stainless steel is slightly magnetic.

Click for combined categories: All Extension Springs


Springs Compression

Hide Pictures

Go to Top  


Springs - Compression - Long Lengths - Music Wire

Springs - Compression - Long Lengths - Music Wire

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Click for combined categories: All Compression Springs


Pins - Wirelock

Hide Pictures

Go to Top  


Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks -  1/10 Pitch

Gears - Racks - 1/10 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  1/20 Pitch

Gears - Racks - 1/20 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears Imperial Helical

Hide Pictures

Go to Top  


Gears - Helical - 48 Normal Pitch

Gears - Helical - 48 Normal Pitch


Click for combined categories: All Imperial Helical Gears


Gears Imperial Bevel

Hide Pictures

Go to Top  


Gears - Bevel - 24 Diametrical Pitch

Gears - Bevel - 24 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
24 DP Mitre Gears


Gears - Bevel - 32 Diametrical Pitch

Gears - Bevel - 32 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
32 DP Mitre Gears


Gears - Bevel - 48 Diametrical Pitch

Gears - Bevel - 48 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
48 DP Mitre Gears


Gears Imperial Mitre

Hide Pictures

Go to Top  


Gears - Mitre - 10 Diametrical Pitch

Gears - Mitre - 10 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 12 Diametrical Pitch

Gears - Mitre - 12 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 20 Diametrical Pitch

Gears - Mitre - 20 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Unhardened Steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 24 Diametrical Pitch

Gears - Mitre - 24 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Nylon, brass and carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears

Related Information:
24 DP Bevel Gears


Gears - Mitre - 32 Diametrical Pitch

Gears - Mitre - 32 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Nylon, brass and carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears

Related Information:
32 DP Bevel Gears


Gears - Mitre - 48 Diametrical Pitch

Gears - Mitre - 48 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Nylon, brass, carbon steel and acetal.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears

Related Information:
48 DP Bevel Gears

48 DP Precision Matched Sets


Gears - Mitre -  8 Diametrical Pitch

Gears - Mitre - 8 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks - 120 Diametrical Pitch

Gears - Racks - 120 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  64 Diametrical Pitch

Gears - Racks - 64 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  72 Diametrical Pitch

Gears - Racks - 72 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  80 Diametrical Pitch

Gears - Racks - 80 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  96 Diametrical Pitch

Gears - Racks - 96 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears Imperial Spur

Hide Pictures

Go to Top  


Gears - Spur - 120 Diametrical Pitch

Gears - Spur - 120 Diametrical Pitch

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 2024 aluminium and 303 stainless steel.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  64 Diametrical Pitch

Gears - Spur - 64 Diametrical Pitch

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium, stainless steel, acetal and brass.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  72 Diametrical Pitch

Gears - Spur - 72 Diametrical Pitch

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium, stainless steel and acetal.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  80 Diametrical Pitch

Gears - Spur - 80 Diametrical Pitch

PCD = No. of Teeth x 0.318mm (1/80 in.). 20o Pressure Angle. 2024 aluminium and 303 stainless steel.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  96 Diametrical Pitch

Gears - Spur - 96 Diametrical Pitch

PCD = No. of Teeth x 0.265mm (1/96 in.). 20o Pressure Angle. 2024 aluminium and 303 stainless steel.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears Imperial Worms

Hide Pictures

Go to Top  


Worms - 24 Pitch (Series 1) - Plastic

Worms - 24 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 1) - Plastic

Worms - 32 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 2) - Plastic

Worms - 32 Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 1) - Plastic

Worms - 48 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 3) - Plastic

Worms - 48 Pitch (Series 3) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Gears Imperial Internal

Hide Pictures

Go to Top  


Gears - Internal - 24 Diametrical Pitch

Gears - Internal - 24 Diametrical Pitch

Various materials including 2024-T4 Aluminum, 303 stainless steel and brass.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 32 Diametrical Pitch

Gears - Internal - 32 Diametrical Pitch

Various materials including 2024-T4 Aluminum, 303 stainless steel and brass.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 48 Diametrical Pitch

Gears - Internal - 48 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 64 Diametrical Pitch

Gears - Internal - 64 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 72 Diametrical Pitch

Gears - Internal - 72 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 96 Diametrical Pitch

Gears - Internal - 96 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears Imperial Mitre

Hide Pictures

Go to Top  


Gears - Mitre - 16 Diametrical Pitch - Nylon

Gears - Mitre - 16 Diametrical Pitch - Nylon

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 16 Diametrical Pitch - Steel

Gears - Mitre - 16 Diametrical Pitch - Steel

1:1 Ratio. 20o Pressure Angle - Unhardened Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears Imperial Spur

Hide Pictures

Go to Top  


Gears - Spur - 120 Diametrical Pitch - Stem

Gears - Spur - 120 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  32 Diametrical Pitch - Stem

Gears - Spur - 32 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  48 Diametrical Pitch - Stem

Gears - Spur - 48 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  64 Diametrical Pitch - Stem

Gears - Spur - 64 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  72 Diametrical Pitch - Stem

Gears - Spur - 72 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  80 Diametrical Pitch - Stem

Gears - Spur - 80 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  96 Diametrical Pitch - Stem

Gears - Spur - 96 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears Imperial Worms

Hide Pictures

Go to Top  


Worms - 24 Pitch (Series 1) - Metallic

Worms - 24 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 2) - Metallic

Worms - 24 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 3) - Metallic

Worms - 24 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 1) - Metallic

Worms - 32 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 2) - Metallic

Worms - 32 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 3) - Metallic

Worms - 32 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 15.95o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 1) - Metallic

Worms - 48 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 2) - Metallic

Worms - 48 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 3) - Metallic

Worms - 48 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.7o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 4) - Metallic

Worms - 48 Pitch (Series 4) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 5) - Metallic

Worms - 48 Pitch (Series 5) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 6) - Metallic

Worms - 48 Pitch (Series 6) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 64 Pitch (Series 1) - Metallic

Worms - 64 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.