Imperial Internal Gears And Gearing - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

PRR-I120-X found in Tools - Circlip Pliers - Internal
Clip Size range: 77.77 - 152.40 (3.1/16 to 6in. Imperial). Tip Angle: Straight. Style: Ratchet.

Stock: 1



Gears Imperial Internal

Hide Pictures

Go to Top  


Gears - Internal - 24 Diametrical Pitch

Gears - Internal - 24 Diametrical Pitch

Various materials including 2024-T4 Aluminum, 303 stainless steel and brass.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 32 Diametrical Pitch

Gears - Internal - 32 Diametrical Pitch

Various materials including 2024-T4 Aluminum, 303 stainless steel and brass.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 48 Diametrical Pitch

Gears - Internal - 48 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 64 Diametrical Pitch

Gears - Internal - 64 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 72 Diametrical Pitch

Gears - Internal - 72 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears - Internal - 96 Diametrical Pitch

Gears - Internal - 96 Diametrical Pitch

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Imperial Internal Gears


Gears Metric Internal

Hide Pictures

Go to Top  


Gears - Internal - Module 1

Gears - Internal - Module 1

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Metric Internal Gears


Gears - Internal - Module 0.5

Gears - Internal - Module 0.5

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Metric Internal Gears


Gears - Internal - Module 0.8

Gears - Internal - Module 0.8

2024-T4 Aluminum and 303 stainless steel.


Click for combined categories: All Metric Internal Gears


Pins - Taper

Hide Pictures

Go to Top  


Pins - Taper - Imperial - Miniature

Pins - Taper - Imperial - Miniature

Imperial Sizes 1:48 Taper (1/4 in. per foot). Miniature sizes. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Pins - Taper - Imperial - Standard

Pins - Taper - Imperial - Standard

Imperial Sizes 1:48 Taper (1/4 in. per foot). Standard sizes numbers 0 to 14. Stainless and Mild Steel.


Click for combined categories: All Imperial Taper Pins

Related Information:
Metric Taper Pins


Circlips

Hide Pictures

Go to Top  


Circlips - Internal - Standard

Circlips - Internal - Standard

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS.

Many sizes can also be ordered in Zinc Plated or Stainless Steel. Tolerances on request. Standard and heavy duty options.

Click for combined categories: All Internal Circlips


Shim

Hide Pictures

Go to Top  


Shims - Slotted - Imperial Sizes

Shims - Slotted - Imperial Sizes

Stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.


Click for combined categories: All Shim

Click for combined categories: All Slotted Shim


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Imperial - Acme

Leadscrew Nuts - Imperial - Acme

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Imperial Leadscrew Nuts

Related Information:
Imperial Acme Nut Flanges


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty

Springs - Die - Imperial - Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty

Springs - Die - Imperial - Medium Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Imperial - Supernuts - Acme

Leadscrew Nuts - Imperial - Supernuts - Acme

Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting


Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Imperial Leadscrew Nuts


Leadscrews - Imperial - Acme - Alloy Steel

Leadscrews - Imperial - Acme - Alloy Steel

Acme Leadscrew Thread - Use with Acme Supernuts

Alloy steel heat treated to RC 56-60.

Click for combined categories: All Leadscrews

Click for combined categories: All Imperial Leadscrews

Related Information:
Imperial Acme Nut Flanges


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Extra Heavy Duty

Springs - Die - Imperial - Extra Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium-Heavy Duty

Springs - Die - Imperial - Medium-Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Leadscrews

Hide Pictures

Go to Top  


Leadscrews - Imperial - Acme - Stainless Steel 18.8

Leadscrews - Imperial - Acme - Stainless Steel 18.8

Acme Leadscrew Thread - Use with Acme Supernuts


Click for combined categories: All Leadscrews

Click for combined categories: All Imperial Leadscrews

Related Information:
Imperial Acme Nut Flanges


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty - Chrome Silicon

Springs - Die - Imperial - Medium Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Mounts Leveling

Hide Pictures

Go to Top  


Mounts - Leveling - Stud Type - Gold Chromate - Imperial

Mounts - Leveling - Stud Type - Gold Chromate - Imperial

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Nickel Plated - Imperial

Mounts - Leveling - Stud Type - Nickel Plated - Imperial

Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Mounts - Leveling - Stud Type - Stainless Steel - Imperial

Mounts - Leveling - Stud Type - Stainless Steel - Imperial

Good quality with value pricing. 303 stainless steel.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.

Click for combined categories: All Pivotal Levelers

Click for combined categories: All Mounting Feet


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Tools Circlip

Hide Pictures

Go to Top  


Tools - Circlip Pliers - Internal

Tools - Circlip Pliers - Internal

Internal circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.

Click for combined categories: All Circlip Tools

Click for combined categories: All Tools


Circlips

Hide Pictures

Go to Top  


Circlips - Internal - Round Section

Circlips - Internal - Round Section

Includes DIN7993B / RB / M1700 / BN826.

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.

Click for combined categories: All Internal Circlips


Circlips - Internal - Inverted

Circlips - Internal - Inverted

M1308 / JV / INTV / BN830.

Inverted lugs seat into the groove for better clearance and cleaner appearance. Good for shielded bearings that pass tightly through the bore or housing. Use recommended installation pliers.

Click for combined categories: All Internal Circlips


Clamping Rings

Hide Pictures

Go to Top  


Spiral Rings - Internal - Medium Duty

Spiral Rings - Internal - Medium Duty

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.

Click for combined categories: All Spiral Rings


Clips

Hide Pictures

Go to Top  


Snaprings - Internal - Stainless Steel

Snaprings - Internal - Stainless Steel

301 S11/S22 Stainless Steel.

Click for combined categories: All Internal Snaprings


Clamping Rings

Hide Pictures

Go to Top  


Spiral Rings - Internal - Medium/Heavy Duty

Spiral Rings - Internal - Medium/Heavy Duty

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.

Click for combined categories: All Spiral Rings


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - Internal Tooth - Spring Steel

Washers - Lock - Internal Tooth - Spring Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Clamping Rings

Hide Pictures

Go to Top  


Rings - Retaining - PR Type Internal - For Linear Bearings

Rings - Retaining - PR Type Internal - For Linear Bearings

Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.


Pins - Taper

Hide Pictures

Go to Top  


Pins - Taper - Metric - Extractable - Internal Thread

Pins - Taper - Metric - Extractable - Internal Thread

1:50 Taper.

DIN 7978. Mild Steel.

Click for combined categories: All Metric Taper Pins


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - Internal Tooth - Stainless Steel

Washers - Lock - Internal Tooth - Stainless Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Gears Imperial Spur

Hide Pictures

Go to Top  


Gears - Spur - 120 Diametrical Pitch - Hub Mounting

Gears - Spur - 120 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  24 Diametrical Pitch - Hub Mounting

Gears - Spur - 24 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  32 Diametrical Pitch - Hub Mounting

Gears - Spur - 32 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  48 Diametrical Pitch - Hub Mounting

Gears - Spur - 48 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  64 Diametrical Pitch - Hub Mounting

Gears - Spur - 64 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  72 Diametrical Pitch - Hub Mounting

Gears - Spur - 72 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  80 Diametrical Pitch - Hub Mounting

Gears - Spur - 80 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  96 Diametrical Pitch - Hub Mounting

Gears - Spur - 96 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears Imperial Worms

Hide Pictures

Go to Top  


Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 15.95o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.7o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 7.12o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Spur Gear Stock Imperial

Hide Pictures

Go to Top  


Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks -  1/10 Pitch

Gears - Racks - 1/10 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  1/20 Pitch

Gears - Racks - 1/20 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears Imperial Helical

Hide Pictures

Go to Top  


Gears - Helical - 48 Normal Pitch

Gears - Helical - 48 Normal Pitch


Click for combined categories: All Imperial Helical Gears


Gears Imperial Bevel

Hide Pictures

Go to Top  


Gears - Bevel - 24 Diametrical Pitch

Gears - Bevel - 24 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
24 DP Mitre Gears


Gears - Bevel - 32 Diametrical Pitch

Gears - Bevel - 32 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
32 DP Mitre Gears


Gears - Bevel - 48 Diametrical Pitch

Gears - Bevel - 48 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
48 DP Mitre Gears


Gears Imperial Mitre

Hide Pictures

Go to Top  


Gears - Mitre - 10 Diametrical Pitch

Gears - Mitre - 10 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 12 Diametrical Pitch

Gears - Mitre - 12 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 20 Diametrical Pitch

Gears - Mitre - 20 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Unhardened Steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 24 Diametrical Pitch

Gears - Mitre - 24 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Nylon, brass and carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears

Related Information:
24 DP Bevel Gears


Gears - Mitre - 32 Diametrical Pitch

Gears - Mitre - 32 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Nylon, brass and carbon steel.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears

Related Information:
32 DP Bevel Gears


Gears - Mitre - 48 Diametrical Pitch

Gears - Mitre - 48 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Nylon, brass, carbon steel and acetal.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears

Related Information:
48 DP Bevel Gears

48 DP Precision Matched Sets


Gears - Mitre -  8 Diametrical Pitch

Gears - Mitre - 8 Diametrical Pitch

1:1 Ratio. 20o Pressure Angle - Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks - 120 Diametrical Pitch

Gears - Racks - 120 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  64 Diametrical Pitch

Gears - Racks - 64 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  72 Diametrical Pitch

Gears - Racks - 72 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  80 Diametrical Pitch

Gears - Racks - 80 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  96 Diametrical Pitch

Gears - Racks - 96 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears Imperial Spur

Hide Pictures

Go to Top  


Gears - Spur - 120 Diametrical Pitch

Gears - Spur - 120 Diametrical Pitch

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 2024 aluminium and 303 stainless steel.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  64 Diametrical Pitch

Gears - Spur - 64 Diametrical Pitch

PCD = No. of Teeth x 0.397mm (1/64 in.). 20o Pressure Angle. 5052 aluminium, stainless steel, acetal and brass.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  72 Diametrical Pitch

Gears - Spur - 72 Diametrical Pitch

PCD = No. of Teeth x 0.353mm (1/72 in.). 20o Pressure Angle. 2024 aluminium, stainless steel and acetal.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  80 Diametrical Pitch

Gears - Spur - 80 Diametrical Pitch

PCD = No. of Teeth x 0.318mm (1/80 in.). 20o Pressure Angle. 2024 aluminium and 303 stainless steel.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  96 Diametrical Pitch

Gears - Spur - 96 Diametrical Pitch

PCD = No. of Teeth x 0.265mm (1/96 in.). 20o Pressure Angle. 2024 aluminium and 303 stainless steel.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears Imperial Mitre

Hide Pictures

Go to Top  


Gears - Mitre - 16 Diametrical Pitch - Nylon

Gears - Mitre - 16 Diametrical Pitch - Nylon

1:1 Ratio. 20o Pressure Angle - Nylon.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears - Mitre - 16 Diametrical Pitch - Steel

Gears - Mitre - 16 Diametrical Pitch - Steel

1:1 Ratio. 20o Pressure Angle - Unhardened Steel

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Mitre Gears


Gears Imperial Spur

Hide Pictures

Go to Top  


Gears - Spur - 120 Diametrical Pitch - Stem

Gears - Spur - 120 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  32 Diametrical Pitch - Stem

Gears - Spur - 32 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  48 Diametrical Pitch - Stem

Gears - Spur - 48 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  64 Diametrical Pitch - Stem

Gears - Spur - 64 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears

Click for combined categories: All Imperial Stem Gears


Gears - Spur -  72 Diametrical Pitch - Stem

Gears - Spur - 72 Diametrical Pitch - Stem

303 stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.