All Items: Housings To Suit Ball Bearings - Categories


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Miniature

Housings - Bearing - Flanged - Miniature

Chromic Anodised Aluminium double or single flanged housings.

For standard radial ball bearings.

Housings - Bearing - Hanger - Miniature

Housings - Bearing - Hanger - Miniature

Chromic Anodised Aluminium hanger housings.

For standard radial ball bearings.

Housings - Bearing - Single Assembly

Housings - Bearing - Single Assembly

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings - Bearing - Square - Miniature

Housings - Bearing - Square - Miniature

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Housings - Bearing - 2 Bolt Mounting Plates

Housings - Bearing - 2 Bolt Mounting Plates

Chromic Anodised Aluminium mounting plates.

For standard radial ball bearings.

Housings - Bearing - Double Assembly - Circlip Retained

Housings - Bearing - Double Assembly - Circlip Retained

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings - Bearing - Single Assembly - Circlip Retained

Housings - Bearing - Single Assembly - Circlip Retained

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Closed

Bearings - Linear - Ball - Closed

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Adjustable

Bearings - Linear - Ball - Adjustable

Adjustable type allows you to vary the preload according to your application

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Stainless Steel - Adjustable

Bearings - Linear - Ball - Stainless Steel - Adjustable

Adjustable type allows you to vary the preload according to your application

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Stainless Steel - Closed

Bearings - Linear - Ball - Stainless Steel - Closed

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings Housings

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Miniature

Housings - Bearing - Pillow Block - Miniature

Aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Hoist Rings

Hide Pictures

Go to Top  


Rings - Hoist - With Ball Bearings

Rings - Hoist - With Ball Bearings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

Click for combined categories: All Hoist Rings


Gearboxes Offset

Hide Pictures

Go to Top  


Gearboxes - Offset -  60 x  60

Gearboxes - Offset - 60 x 60

Base mounted. SRBM60 Series.

Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : Less than 0.11mm / Less than 0.31mm. Operating Temp : -10 to 60 oC | Approx weight : 26 grams.

Click for combined categories: All Offset Gearboxes


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Grooved Race Type

Bearings - Thrust - Ball - Grooved Race Type

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline - Planetary - Size  56 - Economy

Gearheads - Inline - Planetary - Size 56 - Economy

Use with NEMA Size 56 Motors.

Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 446kg (1000 lbs) radial and 446kg (1000 lbs) axial / Maximum input speed 4000 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Flat Race Type

Bearings - Thrust - Ball - Flat Race Type

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline - Planetary - Size  17 - Precision

Gearheads - Inline - Planetary - Size 17 - Precision

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Gearheads - Inline - Planetary - Size  56 - Precision

Gearheads - Inline - Planetary - Size 56 - Precision

Use with NEMA Size 56 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 937kg (2100 lbs) radial and 937kg (2100 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Open

Bearings - Linear - Ball - Open

For running on shafts supported by a rail along their length.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings


Bearings for Housings

Hide Pictures

Go to Top  


Bearings - Acetal with Glass Balls - For Plastic Housings

Bearings - Acetal with Glass Balls - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - Acetal with Stainless Balls - For Plastic Housings

Bearings - Acetal with Stainless Balls - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Angular Contact - 440C Stainless

Bearings - Ball - Angular Contact - 440C Stainless

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Click for combined categories: All Angular Contact Bearings


Bearings - Ball - Angular Contact - Chrome Steel

Bearings - Ball - Angular Contact - Chrome Steel

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Click for combined categories: All Angular Contact Bearings


Bearings Hydrodynamic

Hide Pictures

Go to Top  


Bearings - Hydrodynamic Pressure

Bearings - Hydrodynamic Pressure

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Square

Housings - Linear - Square

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.

Click for combined categories: All Linear Bearing Housings


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Thermoplastic - W300

Housings - Bearing - Pillow Block - Thermoplastic - W300

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 oC to +130 oC. Max. Static Tensile Strength is Long Term. Info for Short Term also available.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Flanged - Square - W300

Housings - Bearing - Flanged - Square - W300

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 oC to +180 oC.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Flanged - 2 Bolt Hole - W300

Housings - Bearing - Flanged - 2 Bolt Hole - W300

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.

Click for combined categories: All Housings with Integral Bearing


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Miniature - High Precision - Steel

Bearings - Linear - Ball - Miniature - High Precision - Steel

Hardened Steel with resin ball retainer

Recommended shaft 58-64 HRC. +0.000 / -0.006. Recommended Housing +0.012 / -0.000.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Miniature - High Precision - Stainless Steel

Bearings - Linear - Ball - Miniature - High Precision - Stainless Steel

Hardened Stainless Steel 440C with resin ball retainer

Recommended shaft 58-64 HRC. +0.000 / -0.006. Recommended Housing +0.012 / -0.000.

Click for combined categories: All Linear Ball Bearings


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - PTFE Bronze Bearing

Housings - Bearing - Pillow Block - PTFE Bronze Bearing

Aluminium with 5 percent self aligning sintered bronze bearing and PTFE solid lubricant.

Bearing: Bronze PTFE impregnated. / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. Operating temperature minus 201 to plus 282o Celsius (minus 330 to plus 540o Farenheit).

Click for combined categories: All Housings with Integral Bearing


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - 440C Stainless

Bearings - Ball - 440C Stainless

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - Chrome Steel

Bearings - Ball - Chrome Steel

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - Ceramic Hybrid

Bearings - Ball - Ceramic Hybrid

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.

Click for combined categories: All Radial Ball Bearings


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Washers Only - Chrome Steel

Bearings - Thrust - Ball - Washers Only - Chrome Steel

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Flanged - 440C Stainless

Bearings - Ball - Flanged - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - Chrome Steel

Bearings - Ball - Flanged - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - 304 Stainless Steel

Bearings - Ball - 304 Stainless Steel

Corrosion and Heat resistance - Non Magnetic - Unhardened.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.050 mm / -0.000 mm OD +0.000 mm / -0.030 mm Width +0.000 mm /- 0.120 mm. Low load, low speed applications requiring maximum corrosion resistance. Non Magnetic. Cages, balls, races and shields from AISI 304 Stainless Steel.

Click for combined categories: All 300 Grade Stainless Bearings


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Ball Bearing Type

Washers - Disc Spring - Ball Bearing Type

Specially designed for preloading ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed - Adjustable

Housings - Linear - Pillow Block - Closed - Adjustable

Includes Bearings. Adjustable preload.

Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball BushingTM Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).

Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing


Balls

Hide Pictures

Go to Top  


Balls - Plastic - Torlon

Balls - Plastic - Torlon

TorlonTM 4301 Bearing Grade Balls. Grade 1.

Polyamide-imide (TorlonTM) Balls. Rockwell Hardness (Method A): E86 or M109-119. Specific Gravity: 1.38. Colour: Brown Opaque.

Click for combined categories: All Plastic Balls

Click for combined categories: All Non Metallic Balls

Related Information:
Other Types of Balls


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Sprockets - Idler

Sprockets - Idler

Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Roller Chain (See types under R)

Idler Shafts


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed - Ceramic Coated

Housings - Linear - Pillow Block - Closed - Ceramic Coated

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.

Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed

Housings - Linear - Pillow Block - Closed

Bearings not included.

NOTE: You may need to use adhesive to hold the bearing securely in place on the 'D' dimension. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. The units can be attached to any surface to offer support in any direction. For use with closed linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - 316 Stainless Steel - Double Row

Bearings - Ball - 316 Stainless Steel - Double Row

Food and Medical grade Stainless Steel - Non Hardenable.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.0762 mm / -0.000 mm OD +0.000 mm / -0.0762 mm Width +/- 0.127 mm. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races.

Click for combined categories: All 300 Grade Stainless Bearings


Bearings - Ball - 316 Stainless Steel - Single Row

Bearings - Ball - 316 Stainless Steel - Single Row

Food and Medical grade Stainless Steel - Non Hardenable.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.0762 mm / -0.000 mm OD +0.000 mm / -0.0762 mm Width +/- 0.127 mm. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races.

Click for combined categories: All 300 Grade Stainless Bearings


Bearings - Ball - Economy - 440C Stainless

Bearings - Ball - Economy - 440C Stainless

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Economy - Chrome Steel

Bearings - Ball - Economy - Chrome Steel

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - With Snap Ring - Chrome Steel

Bearings - Ball - With Snap Ring - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with snap ring. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Open (Type 1)

Housings - Linear - Open (Type 1)

Bearings not included.

Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Housings - Linear - Open (Type 2)

Housings - Linear - Open (Type 2)

Bearings not included.

Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Flanged - WIR - 440C Stainless

Bearings - Ball - Flanged - WIR - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - Flanged - WIR - Chrome Steel

Bearings - Ball - Flanged - WIR - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - WIR - 440C Stainless

Bearings - Ball - WIR - 440C Stainless

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - WIR - Chrome Steel

Bearings - Ball - WIR - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Housings with Integral Bearing

Hide Pictures

Go to Top  


Bearings - Self Clinching - Miniature - Self Aligning

Bearings - Self Clinching - Miniature - Self Aligning

Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 oC to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.

Click for combined categories: All Housings with Integral Bearing


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline - Spur Gear - Size 56

Gearheads - Inline - Spur Gear - Size 56

Use with NEMA Size 56 Motors.

Steel Housing - Aluminium Flanges - Stainless Steel Heat Treated Gears - Ball Bearings. Double Stage / Max 5000 RPM Input Speed. Continuous Torque 135 N.m (1200 lb.in) / Peak Torque 270 N.m (2400 lb.in). Min Efficiency 90% / Max. Backlash 20 min.

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Bearings for Housings

Hide Pictures

Go to Top  


Bearings - For Cast Iron Housings

Bearings - For Cast Iron Housings

Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - For Pressed Metal Housings

Bearings - For Pressed Metal Housings

Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.

Related Information:
Three Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Chrome Steel Bearings with a Snap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Bearings Mounted

Hide Pictures

Go to Top  


Bearings - Spyraflo - Self Clinching - Self Aligning

Bearings - Spyraflo - Self Clinching - Self Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Castors

Hide Pictures

Go to Top  


Castors - Plate - With Ball Bearings - Fixed

Castors - Plate - With Ball Bearings - Fixed


Click for combined categories: All Castors


Castors - Plate - With Ball Bearings - Swivel

Castors - Plate - With Ball Bearings - Swivel


Click for combined categories: All Castors


Castors - Plate - With Ball Bearings - Swivel with Brake

Castors - Plate - With Ball Bearings - Swivel with Brake


Click for combined categories: All Castors


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC.

Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - High Speed Cage

Bearings - Ball - High Speed Cage

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Click for combined categories: All Radial Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - Heavy Duty - Ball - Female

Rod Ends - Steel - Heavy Duty - Ball - Female

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Heavy Duty - Ball - Male

Rod Ends - Steel - Heavy Duty - Ball - Male

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Sealing Plugs

Hide Pictures

Go to Top  


Tools - Sealing Plug Installation

Tools - Sealing Plug Installation

Hand installation tools for sealing plugs

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.

Click for combined categories: All Tools


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - Heavy Duty - Ball - Enlarged Eye - Female

Rod Ends - Steel - Heavy Duty - Ball - Enlarged Eye - Female

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Heavy Duty - Ball - Reduced Eye - Male

Rod Ends - Steel - Heavy Duty - Ball - Reduced Eye - Male

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20oC to +120oC.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Sliding - Stainless - PTFE - Closed

Bearings - Linear - Sliding - Stainless - PTFE - Closed

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Sliding - Stainless - PTFE - Open

Bearings - Linear - Sliding - Stainless - PTFE - Open

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Click for combined categories: All Linear Ball Bearings


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Bronze Bearing

Housings - Bearing - Flanged - Bronze Bearing

5o Static Alignment.

Bearing: Bronze SAE 840 (oil impregnated). Housing: Sintered Aluminium. Bearing Retainer: Outer retainer is steel (which is clinched into Aluminium housing) with a Nylon washer on first face. Apply appropriate factor of safety to the nominal loads and speeds specified. Mating shaft rec. Min. 100 HRB. Max surface finish 16 RMS. Rec. shaft clearance 0.013 - 0.038mm.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Brakes

Hide Pictures

Go to Top  


Limit Stops - Electromagnetic

Limit Stops - Electromagnetic

Adjustable Limits.

Material: Cast aluminium, black anodised. Shaft: Stainless Steel. Ball bearings used throughout. Four miniature single pole double throw switches. Two adjusting screws to permit easy accurate adjustment of the miniature switch actuators.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 oC. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Bearings Mounted

Hide Pictures

Go to Top  


Bearings - Spyraflo - Self Clinching - Non Aligning

Bearings - Spyraflo - Self Clinching - Non Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Roller - Cage and Rollers Only

Bearings - Thrust - Roller - Cage and Rollers Only

Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Roller - Washers

Bearings - Thrust - Roller - Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food grade.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 oC to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food Grade.

Bearings Linear

Hide Pictures

Go to Top  


Bushes - Aluminium - Frelon Lined - Flanged

Bushes - Aluminium - Frelon Lined - Flanged

Self lubricating - Replaces oilite or plastic bearings.

SLIP FIT: Housing bore should be nominal OD +0.050/+0.075 - lock in place with retaining compound or epoxy. PRESS FIT: Housing bore should be nominal OD -0.000/+0.012. Use freezing method for press fit assembly - freeze bearing to -18 oC for 30 minutes. Body: Aluminium. Lining: Frelon.

Click for combined categories: All Aluminium Bushes


Bushes - Aluminium - Frelon Lined - Unflanged

Bushes - Aluminium - Frelon Lined - Unflanged

Self lubricating - Replaces oilite or plastic bearings.

SLIP FIT: Housing bore should be nominal OD +0.050/+0.075 - lock in place with retaining compound or epoxy. PRESS FIT: Housing bore should be nominal OD -0.000/+0.012. Use freezing method for press fit assembly - freeze bearing to -18 oC for 30 minutes. Body: Aluminium. Lining: Frelon.

Click for combined categories: All Aluminium Bushes


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Igubal - Sliding

Housings - Igubal - Sliding

Housing: Aluminium. Insert: Sliding film Iglidur(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.

Click for combined categories: All Housings with Integral Bearing


Tolerance

Hide Pictures

Go to Top  


Rings - Tolerance

Rings - Tolerance

Tolerance Rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.

Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - Economy - Rolled - Nut Only

Screws - Ball - Economy - Rolled - Nut Only

Match with screw. Accuracy T7 50um/300mm. Match all components within the economy range only.

Steel 16 MnCr5 or 100Cr6. Size, length of screw and end bearing configurations will affect the resulting loads and speeds. Backlash 0.01 Percent of lead. Accuracy T7 50um/300mm. Blank sleeve supplied in nut to retain balls. Do not remove without simultaneous assembly to screw.

Click for combined categories: All Ball Screws


Linear Slides

Hide Pictures

Go to Top  


Slides - Drawer - Front Disconnect - Lever - Full Ext

Slides - Drawer - Front Disconnect - Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect.

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Click for combined categories: All Drawer Slides



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155124 products in 3632 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.