Hobby Gears - Small Parts And Bearings Categories


Hobby Gears

Hide Pictures

Go to Top  


Hobby Gears - Spur - 48DP

Hobby Gears - Spur - 48DP

A small selection of popular 48DP Plastic/ Metal Pinion and Spur gears

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a 48DP spur gear, divide multiply the no of teeth by 0.52917.

Hobby Gears - Spur - Module 0.4

Hobby Gears - Spur - Module 0.4

A small selection of popular Module 0.4 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.4 spur gear with 20 teeth has a pitch diameter of 8mm. A module 0.4 spur gear with 10 teeth has a pitch diameter of 4mm.

Hobby Gears - Spur - Module 0.5

Hobby Gears - Spur - Module 0.5

A small selection of popular Module 0.5 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.5 spur gear with 20 teeth has a pitch diameter of 10mm. A module 0.5 spur gear with 10 teeth has a pitch diameter of 5mm.

Hobby Gears - Worm and Wheel  40 : 1 Plastic

Hobby Gears - Worm and Wheel 40 : 1 Plastic

Popular Hobby Set

1 start 40 tooth gear.

Gears - Crown Wheel - Module 0.5 - Hobby

Gears - Crown Wheel - Module 0.5 - Hobby

PCD = No. of Teeth x 0.500mm - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.

Click for combined categories: All Hobby Gears


Gears - Spur - Module 0.5 - Hobby - Economy

Gears - Spur - Module 0.5 - Hobby - Economy

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Hobby Gears


Hobby Servo Motors

Hide Pictures

Go to Top  


Servo Motor - Hobby - General

Servo Motor - Hobby - General

For cars, planes, boats and helicopters. JR, Spektrum, Futaba and Hitec

Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.

Click for combined categories: All Hobby Servo Motors


Hobby Shafting

Hide Pictures

Go to Top  


Shafting - Ground - Hobby - Steel

Shafting - Ground - Hobby - Steel

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Shaft Assortments


Spacers

Hide Pictures

Go to Top  


Spacers - Round - Hobby

Spacers - Round - Hobby

Inexpensive nylon spacers for hobby applications


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby Kits

Gearmotors - Basic - Hobby Kits

These gearmotor kits are of simple mainly plastic design. Great for making simple toys, hobbies or concept testing. Educational series.


Click for combined categories: All Basic Gearmotors


Gearmotors - Basic - Hobby - 12.1mm Diameter

Gearmotors - Basic - Hobby - 12.1mm Diameter

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.

Click for combined categories: All Basic Gearmotors


Leads and Connectors

Hide Pictures

Go to Top  


Leads - Hobby

Leads - Hobby

Adaptor leads for batteries, battery chargers, servos and receivers including Tamiya, Deans and Losi plugs.

Includes Deans and T Connectors.

Books

Hide Pictures

Go to Top  


Books - Hobby - General

Books - Hobby - General

Tips and tricks, maintenance and how-to guides.

Styrene modelling, biodiesel, Tamiya catalogue, RC tuning.

Click for combined categories: All Books


Batteries

Hide Pictures

Go to Top  


Batteries - Hobby - Lead Acid

Batteries - Hobby - Lead Acid

All types of Lead Acid Battery


Books

Hide Pictures

Go to Top  


Books - Hobby - Mousetrap Vehicles

Books - Hobby - Mousetrap Vehicles

Tips and tricks and how-to guides for Mousetrap powered cars and boats

Activities guide and plans.

Click for combined categories: All Books


Gears Metric Stem

Hide Pictures

Go to Top  


Gears - Spur - Module 1 - Stem

Gears - Spur - Module 1 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2 - Stem

Gears - Spur - Module 2 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 0.5 - Stem

Gears - Spur - Module 0.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.75 - Stem

Gears - Spur - Module 0.75 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 0.8 - Stem

Gears - Spur - Module 0.8 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 1.5 - Stem

Gears - Spur - Module 1.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2.5 - Stem

Gears - Spur - Module 2.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears Imperial Spur

Hide Pictures

Go to Top  


Gears - Spur - 120 Diametrical Pitch - Hub Mounting

Gears - Spur - 120 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  24 Diametrical Pitch - Hub Mounting

Gears - Spur - 24 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  32 Diametrical Pitch - Hub Mounting

Gears - Spur - 32 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  48 Diametrical Pitch - Hub Mounting

Gears - Spur - 48 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  64 Diametrical Pitch - Hub Mounting

Gears - Spur - 64 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  72 Diametrical Pitch - Hub Mounting

Gears - Spur - 72 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  80 Diametrical Pitch - Hub Mounting

Gears - Spur - 80 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  96 Diametrical Pitch - Hub Mounting

Gears - Spur - 96 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gears


Spur Gear Stock Metric

Hide Pictures

Go to Top  


Gears - Spur - Stock - Module 0.4 - Carbon Steel

Gears - Spur - Stock - Module 0.4 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 0.5 - Carbon Steel

Gears - Spur - Stock - Module 0.5 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 0.8 - Carbon Steel

Gears - Spur - Stock - Module 0.8 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 1 - Carbon Steel

Gears - Spur - Stock - Module 1 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gear Stock


Spur Gear Stock Imperial

Hide Pictures

Go to Top  


Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gear Blanks

Hide Pictures

Go to Top  


Gears - Blanks

Gears - Blanks

Blanks for cutting gears and pulleys and friction drives.


Gears Cluster

Hide Pictures

Go to Top  


Gears - Cluster - 48 Diametrical Pitch

Gears - Cluster - 48 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears - Cluster - 64 Diametrical Pitch

Gears - Cluster - 64 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears - Cluster - 72 Diametrical Pitch

Gears - Cluster - 72 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears - Cluster - 80 Diametrical Pitch

Gears - Cluster - 80 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears Imperial Worms

Hide Pictures

Go to Top  


Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 15.95o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.7o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 7.12o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Gears Metric Worms

Hide Pictures

Go to Top  


Worm Gears - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worm Gears - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worm Gears - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 3 (Series 1) - Metallic - Left Hand

Worm Gears - Module 3 (Series 1) - Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 3 (Series 1) - Metallic - Right Hand

Worm Gears - Module 3 (Series 1) - Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worms - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worms - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Gears Metric Spur

Hide Pictures

Go to Top  


Gears - Spur - Module 1

Gears - Spur - Module 1

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 2

Gears - Spur - Module 2

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 3

Gears - Spur - Module 3

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. 303 stainless steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears Metric Bevel

Hide Pictures

Go to Top  


Gears - Bevel - Module 1

Gears - Bevel - Module 1

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 1 Mitre Gears


Gears - Bevel - Module 2

Gears - Bevel - Module 2

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 2 Mitre Gears


Gears - Bevel - Module 3

Gears - Bevel - Module 3

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 3 Mitre Gears


Gears Metric Mitre

Hide Pictures

Go to Top  


Gears - Mitre - Module 1

Gears - Mitre - Module 1

1:1 Ratio. 20o Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Mitre Gears

Related Information:
Module 1 Bevel Gears

Module 1 Spiral Mitre Gears


Gears - Mitre - Module 2

Gears - Mitre - Module 2

1:1 Ratio. 20o Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Mitre Gears

Related Information:
Module 2 Bevel Gears

Module 2 Spiral Mitre Gears


Gears - Mitre - Module 3

Gears - Mitre - Module 3

1:1 Ratio. 20o Pressure Angle - Steel, stainless steel, brass, aluminium, acetal and zinc die cast.

Mitre gears are used with a matching gear of the same pitch and number of teeth. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Mitre Gears

Related Information:
Module 3 Bevel Gears

Module 3 Spiral Mitre Gears


Gears Metric Racks

Hide Pictures

Go to Top  


Gears - Racks - Module 1

Gears - Racks - Module 1

20o Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 2

Gears - Racks - Module 2

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 3

Gears - Racks - Module 3

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Gear Racks


Gears Metric Spur

Hide Pictures

Go to Top  


Gears - Spur - Module 0.3

Gears - Spur - Module 0.3

PCD = No. of Teeth x 0.300mm. 20o Pressure Angle. Brass.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.4

Gears - Spur - Module 0.4

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. 416 stainless steel, acetal, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.5

Gears - Spur - Module 0.5

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.7

Gears - Spur - Module 0.7

PCD = No. of Teeth x 0.700mm. 20o Pressure Angle. Acetal.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.8

Gears - Spur - Module 0.8

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 1.5

Gears - Spur - Module 1.5

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 2.5

Gears - Spur - Module 2.5

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. 303 stainless steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Spur Gears


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks -  1/10 Pitch

Gears - Racks - 1/10 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  1/20 Pitch

Gears - Racks - 1/20 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Imperial Gear Racks


Gears Metric Bevel

Hide Pictures

Go to Top  


Gears - Bevel - Module 0.5

Gears - Bevel - Module 0.5

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the hobbyparts.com.au/store/categories/easy+kits/>HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 0.5 Mitre Gears



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.