Hexagonal Bar - Small Parts And Bearings Categories


Bar

Hide Pictures

Go to Top  


Hexagonal Bar - Brass

Hexagonal Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Hexagonal Bar - 303 Stainless

Hexagonal Bar - 303 Stainless

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Hexagonal Bar - Carbon Steel

Hexagonal Bar - Carbon Steel

Saw Cut Ends. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Tube and Tubing

Hide Pictures

Go to Top  


Tube - Hexagonal - Brass

Tube - Hexagonal - Brass

Hexagonal hollow tubing.


Click for combined categories: All Metal Tube


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Locking

Nuts - Hexagonal - Locking

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.

Click for combined categories: All Lock Nuts


Nuts

Hide Pictures

Go to Top  


Nuts - Hexagonal - Peek

Nuts - Hexagonal - Peek


Click for combined categories: All Nuts


Spacers

Hide Pictures

Go to Top  


Standoffs - Hexagonal

Standoffs - Hexagonal

Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.


Nuts

Hide Pictures

Go to Top  


Nuts - Hexagonal - Brass

Nuts - Hexagonal - Brass

UNC - UNF - BA - METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size.

Click for combined categories: All Nuts


Nuts - Hexagonal - Collar

Nuts - Hexagonal - Collar


Click for combined categories: All Nuts


Nuts - Hexagonal - Nylon

Nuts - Hexagonal - Nylon

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Nuts


Nuts - Hexagonal - Steel

Nuts - Hexagonal - Steel

UNC - UNF - BA - METRIC. Plain and Zinc Plated.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Nuts


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Soc-Lock

Nuts - Hexagonal - Soc-Lock

Stainless Steel. No plastic inserts. All metal locking withstands higher temperatures.


Click for combined categories: All Lock Nuts


Nuts

Hide Pictures

Go to Top  


Nuts - Hexagonal - Aluminium

Nuts - Hexagonal - Aluminium

METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Nuts


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Binx - Steel

Nuts - Hexagonal - Binx - Steel

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Weld - Steel

Nuts - Hexagonal - Weld - Steel

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.


Click for combined categories: All Lock Nuts


Nuts

Hide Pictures

Go to Top  


Nuts - Hexagonal - Steel - Grade 2

Nuts - Hexagonal - Steel - Grade 2

General automotive and equipment repair and maintenance. Zinc chromate finish. For use with grade 5 cap screws.

Meets or exceeds ANSI B18.2.2 and SAE J995 standards.

Click for combined categories: All Nuts


Nuts - Hexagonal - Steel - Grade 5

Nuts - Hexagonal - Steel - Grade 5

Medium carbon steel. Zinc chromate. Designed for use with Grade 5 cap screws. Meets or exceeds ANSI B18.2.2 and SAE J995 standards. Proof load 120,000 PSI.

Meets or exceeds ANSI B18.2.2 and SAE J995 standards.

Click for combined categories: All Nuts


Nuts - Hexagonal - Steel - Grade 8

Nuts - Hexagonal - Steel - Grade 8

High strength alloy steel nuts deliver an extra margin of safety in critical applications. Meets or exceeds all ASME/ANSI B18.2.2K and SAE J995 standards for tensile strength and hardness.

Zinc gold chromate plating provides superior corrosion resistance. Should be used with Grade 8 cap screws. UNC-USS coarse thread and UNF-SAE fine thread.

Click for combined categories: All Nuts


Nuts - Hexagonal - Steel - Slotted

Nuts - Hexagonal - Steel - Slotted

Castellated (slotted) hex nuts in UNC or UNF threads


Click for combined categories: All Nuts


Nuts - Hexagonal - Stainless Steel

Nuts - Hexagonal - Stainless Steel

UNC - UNF - BA - METRIC - BSW - Course - Fine - Extra Fine.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Nuts


Nuts - Hexagonal - Titanium - 6AL-4V

Nuts - Hexagonal - Titanium - 6AL-4V

METRIC. 6AL-4V (Grade 5) High strength titanium alloy.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. 6AL-4V (Grade 5) High strength titanium alloy, used in critical aircraft structural components. UNS R56400.

Click for combined categories: All Nuts


Nuts - Hexagonal - Half - Stainless Steel

Nuts - Hexagonal - Half - Stainless Steel

UNC - UNF - METRIC

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Nuts


Nuts - Hexagonal - Nylon - Self Tapping

Nuts - Hexagonal - Nylon - Self Tapping

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Nuts


Nuts - Hexagonal - Steel - Class 10 Metric

Nuts - Hexagonal - Steel - Class 10 Metric

Medium carbon steel. For use with Property Class 10.9 cap screws.


Click for combined categories: All Nuts


Nuts - Hexagonal - Steel - Class 8 Metric

Nuts - Hexagonal - Steel - Class 8 Metric

Metric property class 8. Zinc chromate plate with red dye for easy identification. Meets or exceeds ANSI/ASME B18.2.4.1 standards.


Click for combined categories: All Nuts


Nuts - Hexagonal - Titanium - CP Grade 1

Nuts - Hexagonal - Titanium - CP Grade 1

METRIC. CP Grade 1.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250.

Click for combined categories: All Nuts


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Nylon Insert - Aluminium

Nuts - Hexagonal - Nylon Insert - Aluminium

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Brass

Nuts - Hexagonal - Nylon Insert - Brass

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Steel

Nuts - Hexagonal - Nylon Insert - Steel

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Weld - Stainless Steel

Nuts - Hexagonal - Weld - Stainless Steel

Stainless Steel.


Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Binx - Stainless Steel 304

Nuts - Hexagonal - Binx - Stainless Steel 304

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Nylon Insert - Stainless Steel

Nuts - Hexagonal - Nylon Insert - Stainless Steel

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Leadscrews

Hide Pictures

Go to Top  


Leadscrew Nuts - Metric - Hexagonal - Metallic

Leadscrew Nuts - Metric - Hexagonal - Metallic

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Click for combined categories: All Leadscrew Nuts

Click for combined categories: All Metric Leadscrew Nuts

Related Information:
Metric Whirled Leadscrew


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose

Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.

Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.

Click for combined categories: All Threaded Spring Plungers


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Class 10

Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Class 10

Prevailing torque locknuts.Zinc gold chromate. Medium carbon steel. For use with property class 10.9 and 8.8 fasteners.

Metric Only.

Click for combined categories: All Lock Nuts


Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Grade C

Nuts - Hexagonal - Locknuts - Prevailing Torque - Steel - Grade C

Prevailing torque locknuts.Zinc gold chromate. Medium carbon steel. For use grade 8 cap screws.

UNC and UNF. Meets or exceeds IFI 100 / 107 and IFI 101 standards.

Click for combined categories: All Lock Nuts


Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Keyed

Shafting - Keyed

Keyways are cut full length of each bar.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00.

Click for combined categories: All Shafting


Shafting - Ground - Silver Steel

Shafting - Ground - Silver Steel

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium

Shafting - Aluminium

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40Ám. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

Click for combined categories: All Aluminium Shafting


Hobby Shafting

Hide Pictures

Go to Top  


Shafting - Ground - Hobby - Steel

Shafting - Ground - Hobby - Steel

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Shaft Assortments


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Precision - Chrome Plated

Shafting - Ground - Precision - Chrome Plated

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Hardened and recommended for use with precision bearings. Ends are not plated.


Shafting - Ground - Precision - Chrome Vanadium Alloy

Shafting - Ground - Precision - Chrome Vanadium Alloy

Precision ground shafting. Ck53 / Cf53 Chrome Vanadium Alloy. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - High Carbon Steel

Shafting - Ground - Precision - High Carbon Steel

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 303 Grade

Shafting - Ground - Precision - Stainless 303 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 316 Grade

Shafting - Ground - Precision - Stainless 316 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 416 Grade Hardened

Shafting - Ground - Precision - Stainless 416 Grade Hardened

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 420 Grade Hardened

Shafting - Ground - Precision - Stainless 420 Grade Hardened

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 17-4PH Grade Hardened

Shafting - Ground - Precision - Stainless 17-4PH Grade Hardened

Precision ground shafting. 17-4PH grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 440C Grade Hardened

Shafting - Ground - Precision - Stainless 440C Grade Hardened

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium - Ceramic Coated

Shafting - Aluminium - Ceramic Coated

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Aluminium Shafting


Shafting Hollow

Hide Pictures

Go to Top  


Shafting - Pipe - AISI52100 Steel

Shafting - Pipe - AISI52100 Steel

AISI 52100 Steel Hardened to HRC 58-62. Straightness 0.0003 mm / mm. Ideal for design weight reduction. Note! ID of pipe shaft may be up to 1mm undersize. Other lengths may be available on request however a surcharge for special sizing will apply and extended delivery times can be expected (if available).

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium - Ceramic Coated - Tapped

Shafting - Aluminium - Ceramic Coated - Tapped

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Aluminium Shafting


Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Mild Steel

Shafting - Mild Steel

Great axles for low load and low precision applications like trolleys, carts and wheelbarrows.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Pipe - Aluminium

Shafting - Pipe - Aluminium

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40Ám. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Cold Rolled Steel

Shafting - Ground - Cold Rolled Steel

Cold rolled steel with saw cut ends and smooth finish


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Supported - Pre-Drilled - Aluminium

Shafting - Supported - Pre-Drilled - Aluminium

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40Ám. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

Click for combined categories: All Shafts


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Pre Drilled and Tapped - High Carbon Steel

Shafting - Pre Drilled and Tapped - High Carbon Steel

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.

Click for combined categories: All Shafting


Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Shafting - Pre Drilled and Tapped - Stainless Steel Steel

For use with rail supports and open linear bearings


Square Shaft

Hide Pictures

Go to Top  


Shafting - Linear - Square

Shafting - Linear - Square


Click for combined categories: All Shafting


Bar

Hide Pictures

Go to Top  


Square Bar - Brass

Square Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Bar - I Beam - Brass

Bar - I Beam - Brass


Square Bar - Urethane

Square Bar - Urethane

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.

Click for combined categories: All Square Bar


Bar - H Section - Brass

Bar - H Section - Brass


Rectangular Bar - Brass

Rectangular Bar - Brass

Thin and thick brass strip and rectangular profiles

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small sizes may not be perfectly straight.

Click for combined categories: All Rectangular Bar

Related Information:
See also Strip Brass for very thin strips


Square Bar - 303 Stainless

Square Bar - 303 Stainless

Corrosion resistant 303 grade stainless.

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Square Bar - Carbon Steel

Square Bar - Carbon Steel

Saw Cut Ends. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Rectangular Bar - Aluminium

Rectangular Bar - Aluminium

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.

Click for combined categories: All Rectangular Bar


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - With Shaft

Rail Supports - With Shaft

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings


Rail Supports - Without Shaft

Rail Supports - Without Shaft

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearing in Housing

Linear Bearings


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Shafts - Steel

Splined Shafts - Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Splined Shafts - Stainless Steel

Splined Shafts - Stainless Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafts - Idler

Shafts - Idler

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Magnets Alnico

Hide Pictures

Go to Top  


Magnets - Alnico - Bar

Magnets - Alnico - Bar

Cast Alnico 5 bar


Click for combined categories: All Magnets

Click for combined categories: All Alnico Magnets


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafts - Pinion

Shafts - Pinion


Click for combined categories: All Shafts


Shafting General Purpose

Hide Pictures

Go to Top  


Shafts - Flexible - Panel Mount - Cased

Shafts - Flexible - Panel Mount - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Panel Mount - Open

Shafts - Flexible - Panel Mount - Open

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - With Shaft - One Piece

Rail Supports - With Shaft - One Piece

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings

Frelon Linear Bearings


Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Extenders - Shaft

Extenders - Shaft

Miniature and large shaft extenders and reducers


Magnets Alcomax

Hide Pictures

Go to Top  


Magnets - Alcomax - Cylindrical Bar

Magnets - Alcomax - Cylindrical Bar

No keepers


Click for combined categories: All Magnets

Click for combined categories: All Alcomax Magnets


Magnets - Alcomax - Rectangular Bar

Magnets - Alcomax - Rectangular Bar

No keepers


Click for combined categories: All Magnets

Click for combined categories: All Alcomax Magnets


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open (Ondrives)

Shafts - Flexible - Coupling Ends - Open (Ondrives)

Bi-directional flexible shaft couplings.

Hubs: 220 MO7 / Shaft: Steel. Standard bored ends. Keyways can be included in the bores for additional cost.

Click for combined categories: All Flexible Shaft


Shaft Locks

Hide Pictures

Go to Top  


Shaft Locks - Potentiometer

Shaft Locks - Potentiometer


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Cased

Shafts - Flexible - Coupling Ends - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Gearbox Output Shafts

Hide Pictures

Go to Top  


Gearboxes - Output Shafts - For E Type Helical Reducers

Gearboxes - Output Shafts - For E Type Helical Reducers

For use in Right Angle gearboxes with bores. E Series.

Stainless 303 shaft. Steel keys and circlips. E-X and E-DX types suitable for E type gearboxes (right angle types).

Click for combined categories: All Shafts


Gearboxes - Output Shafts - For P Type Worm Reducers

Gearboxes - Output Shafts - For P Type Worm Reducers

For use in Cross Axis gearboxes with bores. P and PF Series.

Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).

Click for combined categories: All Shafts


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Masterflex - Size 13 - High Duty

Shafts - Flexible - Masterflex - Size 13 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  4 - High Duty

Shafts - Flexible - Masterflex - Size 4 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  5 - High Duty

Shafts - Flexible - Masterflex - Size 5 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  6 - Standard Duty

Shafts - Flexible - Masterflex - Size 6 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - High Duty

Shafts - Flexible - Masterflex - Size 8 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - Standard Duty

Shafts - Flexible - Masterflex - Size 8 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - High Duty

Shafts - Flexible - Masterflex - Size 9 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - Standard Duty

Shafts - Flexible - Masterflex - Size 9 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill Blanks

Rod - Drill Blanks

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.

Click for combined categories: All Drill Rod


Rod - Drill - General

Rod - Drill - General

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil. See also Silver Steel.

Click for combined categories: All Drill Rod

Related Information:
Silversteel


Tensioners

Hide Pictures

Go to Top  


Tensioner - Drive - Single Adjusting - Shaft Mount

Tensioner - Drive - Single Adjusting - Shaft Mount

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill - A-2 Air Hardening

Rod - Drill - A-2 Air Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - O-1 Oil Hardening

Rod - Drill - O-1 Oil Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.