Quick Delivery Items: Handles - Small Parts And Bearings Categories

FOUND IN PARTS DATABASE:- The item was found in our part numbers and descriptions database. Click Here to show the parts found.



Handles

Hide Pictures

Go to Top  


Handles - Adjustable - Stud

Handles - Adjustable - Stud

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.

Handles - Clean Line - Style 2

Handles - Clean Line - Style 2

High impact strength special technopolymer, in white similar to RAL 9002 with bright finish. Resistant to solvents, oils, greases and other chemical agents. Push fitting on plain shaft made from standard h9 tolerance bright drawn stock bars. Elastic coupling: the handle is not affected by vibrations and does not tend to loosen.

Click for combined categories: All Handles


Handles - Steel

Handles - Steel

Brass, Stainless Steel, Aluminium.


Click for combined categories: All Handles


Handles - Steel - End Ferrules

Handles - Steel - End Ferrules


Click for combined categories: All Handles


Knobs Lock

Hide Pictures

Go to Top  


Handles - Lock - Round

Handles - Lock - Round

Satin Chrome with black plastic grip. Supplied with 2 keys to differ or 2 keys to pass 92201.

Click for combined categories: All Lock Handles

Click for combined categories: All Handles


Latches

Hide Pictures

Go to Top  


Handles - Latching - 2-Point Locking Rod Kit

Handles - Latching - 2-Point Locking Rod Kit

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.


Handles - Latching - Cab Locks

Handles - Latching - Cab Locks

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.


Handles - Latching - L-Handle - Locking

Handles - Latching - L-Handle - Locking

Chrome finished zinc die-cast construction. 360o handle rotation. Comes with gasket. All locks are keyed alike. Keys included. May be used with rod kit for 2 point locking.


Handles - Latching - Padlocking

Handles - Latching - Padlocking

Zinc finished iron/steel construction. Has 5/16in. Square shank.


Handles - Latching - T-Handle - Folding

Handles - Latching - T-Handle - Folding

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.


Handles - Latching - T-Handle - Locking

Handles - Latching - T-Handle - Locking

90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.


Handles - Tee

Handles - Tee

Zinc plated steel 7.94mm (5/16in.) square shank.


Latching Handles - Outside Door - Heavy Duty

Latching Handles - Outside Door - Heavy Duty

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.

Latches - Knob Handle

Latches - Knob Handle

Black powder coated die cast zinc. Maximum working load 66kg. Average ultimate load 150kg.


Latches - L-Handle

Latches - L-Handle

Bright chrome. With or without lock. Turn clockwise to latch. Average ultimate load is 185 kg.


Latches - L Handle - Locking

Latches - L Handle - Locking

Black polyamide and clear coated zinc

Includes key. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - L Handle - Non  Locking

Latches - L Handle - Non Locking

Black polyamide and clear coated zinc

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - T-Handle

Latches - T-Handle

Bright chrome. With or without lock. Turn clockwise to latch. Average ultimate load is 185 kg.


Latches - T-Handle - Basic

Latches - T-Handle - Basic

Made of die cast zinc with matte black polyester powder coated and zinc alloy plated steel parts. Max working load 44kg. Average ultimate load 88kg. Three hole mount installation. 8-32 screws and lockwashers supplied for max 4mm door thickness.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - T-Handle - Polyamide - Locking

Latches - T-Handle - Polyamide - Locking

Includes key ELH-333. Clear zinc coated

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - T-Handle - Polyamide - Non Locking

Latches - T-Handle - Polyamide - Non Locking

Clear zinc coated

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - T-Handle - Steel

Latches - T-Handle - Steel

Wide grip range, restricted to 90o rotation. Mounts from inside panel. No visible mounting hardware. Turn clockwise to open.

Die cast zinc. Available either chrome plated or with chemical protective film.

Latches - Wing Handle - Locking - Black Polyamide

Latches - Wing Handle - Locking - Black Polyamide

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Wing Handle - Locking - Black Powder Coat

Latches - Wing Handle - Locking - Black Powder Coat

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Wing Handle - Locking - Chrome

Latches - Wing Handle - Locking - Chrome

Includes Key ELH-333

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Wing Handle - Non Locking - Black Polyamide

Latches - Wing Handle - Non Locking - Black Polyamide

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Pins - Clevis

Hide Pictures

Go to Top  


Pins - Clevis - Handle - Bent

Pins - Clevis - Handle - Bent

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle.

Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Handle - Straight - Plain

Pins - Clevis - Handle - Straight - Plain

Also known as Hitch Pins. Heat treated.


Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Handle - Straight - Powder Coated

Pins - Clevis - Handle - Straight - Powder Coated

Also known as Hitch Pins. Heat treated.


Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Cross Blocks

Hide Pictures

Go to Top  


Joints - Swivel - Tee Handle - Steel

Joints - Swivel - Tee Handle - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Latches

Hide Pictures

Go to Top  


Latches - Compression - L-Handle

Latches - Compression - L-Handle

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Compression - T-Handle

Latches - Compression - T-Handle

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Draw - T-Handle - Stainless Steel

Latches - Draw - T-Handle - Stainless Steel

Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Latches - Draw - T-Handle - Zinc Plated Steel

Latches - Draw - T-Handle - Zinc Plated Steel

Black rubber T Handle with steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.


Plungers Indexing

Hide Pictures

Go to Top  


Plungers - Indexing - Large Handle

Plungers - Indexing - Large Handle

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

Extra large fluted handle for quick and easy plunger retraction. Can be fully retracted into the body by pulling up on the handle. Handle is black thermoplastic. Body and pin are steel with black oxide finish.

Click for combined categories: All Indexing Plungers


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Acetal Handle - Locking - Stainless

Plungers - Spring - Acetal Handle - Locking - Stainless

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Acetal Handle - Locking - Steel

Plungers - Spring - Acetal Handle - Locking - Steel

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Acetal Handle - Non Locking - Stainless

Plungers - Spring - Acetal Handle - Non Locking - Stainless

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Acetal Handle - Non Locking - Steel

Plungers - Spring - Acetal Handle - Non Locking - Steel

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Stainless

Plungers - Spring - Knurled Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Stainless/Acetal

Plungers - Spring - Knurled Handle - Locking - Stainless/Acetal

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Stainless/Phenolic

Plungers - Spring - Knurled Handle - Locking - Stainless/Phenolic

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Steel

Plungers - Spring - Knurled Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Steel/Acetal

Plungers - Spring - Knurled Handle - Locking - Steel/Acetal

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Steel/Phenolic

Plungers - Spring - Knurled Handle - Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Non Locking - Stainless

Plungers - Spring - Knurled Handle - Non Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Non Locking - Steel

Plungers - Spring - Knurled Handle - Non Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Stainless

Plungers - Spring - L Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Stainless/Acetal

Plungers - Spring - L Handle - Locking - Stainless/Acetal

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Stainless/Phenolic

Plungers - Spring - L Handle - Locking - Stainless/Phenolic

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Steel

Plungers - Spring - L Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Steel/Acetal

Plungers - Spring - L Handle - Locking - Steel/Acetal

Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Steel/Phenolic

Plungers - Spring - L Handle - Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Non Locking - Steel

Plungers - Spring - L Handle - Non Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Stainless

Plungers - Spring - Ring Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Stainless/Phenolic

Plungers - Spring - Ring Handle - Locking - Stainless/Phenolic

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Steel

Plungers - Spring - Ring Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Locking - Steel/Phenolic

Plungers - Spring - Ring Handle - Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Stainless

Plungers - Spring - Ring Handle - Non Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Stainless/Phenolic

Plungers - Spring - Ring Handle - Non Locking - Stainless/Phenolic

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Steel

Plungers - Spring - Ring Handle - Non Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Ring Handle - Non Locking - Steel/Phenolic

Plungers - Spring - Ring Handle - Non Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Tee Handle - Locking - Stainless

Plungers - Spring - Tee Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Tee Handle - Locking - Steel

Plungers - Spring - Tee Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Pins - Pull

Hide Pictures

Go to Top  


Pins - Pull - Round Handle - Aluminium and Steel

Pins - Pull - Round Handle - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Round Handle - Stainless Steel

Pins - Pull - Round Handle - Stainless Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Round Handle - Steel

Pins - Pull - Round Handle - Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Tee Handle - Aluminium and Steel

Pins - Pull - Tee Handle - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Tee Handle - Stainless Steel

Pins - Pull - Tee Handle - Stainless Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Tee Handle - Steel

Pins - Pull - Tee Handle - Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Latches

Hide Pictures

Go to Top  


Latches - Compression - Wing

Latches - Compression - Wing

Handles and housings are black powder coated zinc alloy. If handle is a locking type it is supplied with one ELH-333 key.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Latches - Draw - Flexible - T-Handle - Non Conductive

Latches - Draw - Flexible - T-Handle - Non Conductive

No metal parts. UV resistant, self aligning. Inbuilt drag prevents handle flopping. Steady state clamp force 4.4kg. Mounts with M5 screws or 4.76mm (3/16 in.) rivets. Keeper included.

Thermoplastic elastomer.

Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Hex Drive Handle - Locking - Steel

Plungers - Spring - Hex Drive Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Pins - Ball Lock

Hide Pictures

Go to Top  


Pins - Ball Lock - Ball Handle - Plastic Handle

Pins - Ball Lock - Ball Handle - Plastic Handle

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Commercial

Pins - Ball Lock - Button Handle - Commercial

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Stainless Steel

Pins - Ball Lock - Button Handle - Stainless Steel

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - Button Handle - Steel

Pins - Ball Lock - Button Handle - Steel

Heat treated 4130 alloy spindle and shank. Handles aluminium.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - L-Handle - Industrial - Steel

Pins - Ball Lock - L-Handle - Industrial - Steel

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Commercial

Pins - Ball Lock - T-Handle - Commercial

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Plastic Handle

Pins - Ball Lock - T-Handle - Plastic Handle

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.


Click for combined categories: All Ball Lock Pins


Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

17-4 PH or PH15-7MO stainless steel spindle and shank. Ground handling pins used in the handling of aircraft and service equipment.


Click for combined categories: All Ball Lock Pins


Latches

Hide Pictures

Go to Top  


Latches - 1/4 Turn -L Handle - Blank

Latches - 1/4 Turn -L Handle - Blank

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -L Handle - Blank - 316 Stainless Steel

Latches - 1/4 Turn -L Handle - Blank - 316 Stainless Steel

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -L Handle - Coin Proof Slotted

Latches - 1/4 Turn -L Handle - Coin Proof Slotted

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black diecast. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle Defeator - 304 Stainless Steel - Padlockable

Latches - 1/4 Turn - L Handle Defeator - 304 Stainless Steel - Padlockable

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle - Key Locking - Padlockable

Latches - 1/4 Turn - L Handle - Key Locking - Padlockable

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -L Handle - Padlockable - 316 Stainless Steel

Latches - 1/4 Turn -L Handle - Padlockable - 316 Stainless Steel

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle - Plain

Latches - 1/4 Turn - L Handle - Plain

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Defeator - Slotted Insert

Latches - 1/4 Turn - L Handle with Defeator - Slotted Insert

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black powder coating. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - 304 Stainless Steel

Latches - 1/4 Turn - L Handle with Pawl - 304 Stainless Steel

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - Black Finish

Latches - 1/4 Turn - L Handle with Pawl - Black Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - Chrome Finish

Latches - 1/4 Turn - L Handle with Pawl - Chrome Finish

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn  - L Handle with Pawl - Chrome Finish - Padlockable

Latches - 1/4 Turn - L Handle with Pawl - Chrome Finish - Padlockable

Quarter turn latches. Nema 4 rated. Supplied assembled. Includes housing, insert, rubber seal, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking

Latches - 1/4 Turn -Tee Handle - 304 Stainless Steel - Blank - Non-Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Latches - 1/4 Turn -Tee Handle - 316 Stainless Steel - Non-Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches


Latches - 1/4 Turn -Tee Handle - Locking

Latches - 1/4 Turn -Tee Handle - Locking

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.

Click for combined categories: All Quarter Turn Latches



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155215 products in 3613 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.