All Items: Flexible Shaft - Categories


Part Description Matches

Hide Pictures

Go to Top  


Search again without part description matches.


KYO-94631-03

Part number KYO-94631-03.

Description: Shaft. Suits: -. Description: G Flexible.
Group: RC Spare Parts - Kyosho

Stock: Backorder


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Cased

Shafts - Flexible - Coupling Ends - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open (Ondrives)

Shafts - Flexible - Coupling Ends - Open (Ondrives)

Bi-directional flexible shaft couplings.

Hubs: 220 MO7 / Shaft: Steel. Standard bored ends. Keyways can be included in the bores for additional cost.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 13 - High Duty

Shafts - Flexible - Masterflex - Size 13 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 13 - Standard Duty

Shafts - Flexible - Masterflex - Size 13 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 16 - High Duty

Shafts - Flexible - Masterflex - Size 16 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 16mm encased in 32mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 16mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 16 - Standard Duty

Shafts - Flexible - Masterflex - Size 16 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 16mm encased in 32mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 16mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  4 - High Duty

Shafts - Flexible - Masterflex - Size 4 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  4 - Standard Duty

Shafts - Flexible - Masterflex - Size 4 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  5 - High Duty

Shafts - Flexible - Masterflex - Size 5 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  5 - Standard Duty

Shafts - Flexible - Masterflex - Size 5 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  6 - High Duty

Shafts - Flexible - Masterflex - Size 6 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  6 - Standard Duty

Shafts - Flexible - Masterflex - Size 6 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - High Duty

Shafts - Flexible - Masterflex - Size 8 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - Standard Duty

Shafts - Flexible - Masterflex - Size 8 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - High Duty

Shafts - Flexible - Masterflex - Size 9 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - Standard Duty

Shafts - Flexible - Masterflex - Size 9 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafting General Purpose

Hide Pictures

Go to Top  


Shafts - Flexible - Panel Mount - Cased

Shafts - Flexible - Panel Mount - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Panel Mount - Open

Shafts - Flexible - Panel Mount - Open

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Couplings Other

Hide Pictures

Go to Top  


Couplings - Neo-Flex

Couplings - Neo-Flex

0.71 to 1.27 Nm.

303 stainless steel with 73 durometer neoprene centre. Shaft to shaft insulation. Torsional vibration isolation. Ribbed style are more flexible than smooth style. Bore Tolerances: +0.025 / -0.000.

Related Information:
Shafting


Latches

Hide Pictures

Go to Top  


Latches - Draw - Flexible - T-Handle - Non Conductive

Latches - Draw - Flexible - T-Handle - Non Conductive

No metal parts. UV resistant, self aligning. Inbuilt drag prevents handle flopping. Steady state clamp force 4.4kg. Mounts with M5 screws or 4.76mm (3/16 in.) rivets. Keeper included.

Thermoplastic elastomer.

Gear Racks Flexible

Hide Pictures

Go to Top  


Gears - Racks - Flexible

Gears - Racks - Flexible

Blue acetal. Ideal for curved or irregular surfaces. Can fit a bent radius as small as 75mm.

20o Pressure Angle. Resistant to weak acids and alkalis, oil, grease, petrol, alcohol, ketones. Working temperature 100 Deg. C, Intermittent to 149 Deg. C. See optional rack clamps and guide rails. Longer lengths available on special order.

Click for combined categories: All Flexible Gear Racks


Gears - Racks - Flexible - Clamps

Gears - Racks - Flexible - Clamps

For clamping acetal flexirack.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Flexible Gear Racks


Gears - Racks - Flexible - Guide Rails

Gears - Racks - Flexible - Guide Rails

For mounting flexirack. Flexible nylon or rigid aluminium guide rails.

Longer lengths in Nylon available on special order. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Flexible Gear Racks


Couplings Other

Hide Pictures

Go to Top  


Couplings - Disc - Flexible

Couplings - Disc - Flexible

High torque. No backlash. Clamp fixing.

Aluminium A2017 Hubs. Aluminium A2011 Spacer. Stainless Steel 301 Pin. Stainless Steel 303 Disc.

Couplings - Disc - Flexible - Miniature

Couplings - Disc - Flexible - Miniature

Twin disc zero backlash


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Slit Type - Standard

Couplings - Slit Type - Standard

Aluminium - Stainless Steel - Flexible - Zero Backlash. 0.1 to 35 Nm. 2400 to 48000 rpm.

High Torsional Stiffness. Zero Backlash.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Straps

Hide Pictures

Go to Top  


Straps - Cargo

Straps - Cargo

Black rubber cargo straps with hooks. Stronger but less flexible than bungee straps.


Shim

Hide Pictures

Go to Top  


Shims - Rubber

Shims - Rubber

Handy non marring soft spacer shims in a wedge shape

Level and stabilise appliances, desks, tables, filing cabinets, machinery. Stackable. Vibration cushioning. Ribs ensure that wedges grab tight and stay in place. Black ridid wedges can support up to 2000 lbs. White flexible wedges can be trimmed with a utility knife.

Click for combined categories: All Shim


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Aluminium

Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Aluminium

Aluminium - Flexible.


Click for combined categories: All Helical and Slit Couplings


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Spider Type C - Complete

Couplings - Spider Type C - Complete

Miniature aluminium curved jaw flexible couplings. 2 to 160 Nm. Match only hubs and spiders from listings SPIDER TYPE C. Inserts are held between the jaws of two hubs.

Discs (either red as standard with blue or white optional) are available to purchase separately. Flexible couplings transmit torque and rotational angle while absorbing misalignment. When the misalignment exceeds allowable values, vibration may result or the life of the coupling may become shortened. Zero backlash in low torque application, made capable by having the hubs pressed in a spacer. Can be used as a flexible coupling in a high torque application. Polyurethane spider.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium

Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Aluminium

Aluminium - Flexible.


Click for combined categories: All Helical and Slit Couplings


Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Stainless Steel

Couplings - Slit Type - 4 Slit Miniature - Clamp Type - Stainless Steel

303 Stainless Steel - Flexible.


Click for combined categories: All Helical and Slit Couplings


Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Stainless Steel

Couplings - Slit Type - 4 Slit Miniature - Set Screw Type - Stainless Steel

Stainless Steel - Flexible.


Click for combined categories: All Helical and Slit Couplings


Balls

Hide Pictures

Go to Top  


Balls - Rubber - Santoprene 40D

Balls - Rubber - Santoprene 40D

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .95 g/cc. Hardness, Shore 40D. Tensile Strength 3000 psi. Melting Point 410 F. Rohs Compliant. Not FDA compliant. This grade is slightly harder than the 87A grade. Colour Red.

Click for combined categories: All Rubber Balls

Click for combined categories: All Non Metallic Balls

Related Information:
Other Types of Balls


Balls - Rubber - Santoprene 87A

Balls - Rubber - Santoprene 87A

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .96 g/cc. Hardness, Shore 87A. Tensile Strength 2550 psi. Melting Point 400 F. Rohs Compliant and FDA compliant. This grade is slightly softer than the 40D grade. Colour Beige.

Click for combined categories: All Rubber Balls

Click for combined categories: All Non Metallic Balls

Related Information:
Other Types of Balls


Couplings Other

Hide Pictures

Go to Top  


Couplings - K Type

Couplings - K Type

Up to 3600 RPM - Minus 20 to Plus 60o C. 0.34 to 18 Nm.

Strong, flexible polyurethane or Hyrtel(R) is cut and tear resistant. Up to 3600 RPM. Urethane: Minus 20 to Plus 60o C / Hyrtel(R) : Minus 40 to Plus 100o C. Precision swaged mechanically crimped hubs. Annealed steel hubs.

Related Information:
Shafting


Cable Ties

Hide Pictures

Go to Top  


Velcro - One Wrap Tape

Velcro - One Wrap Tape

One wrap tape is a single tape with hooks on one side and loops on the other. Used for quick flexible secure and reusable cable management.


Bumpers

Hide Pictures

Go to Top  


Bumpers - Elastomer - Medium Energy Absorption - Low Reaction Force

Bumpers - Elastomer - Medium Energy Absorption - Low Reaction Force

Elastomer bumpers provide excellent resistance to chemicals and humidity. 20 times greater durability than urethane.

10 greater durability than rubber and 500 times greater than steel coiled springs. Maintains excellent resilience at extreme temperatures and remains flexible with no material degradation between -62 oC and +148 Deg C (-80 Deg F and +300 Deg F). Mounting screws not included.

Click for combined categories: All Bumpers


Bumpers - Elastomer - High Energy Absorption - Compact Size - Short Stroke

Bumpers - Elastomer - High Energy Absorption - Compact Size - Short Stroke

Elastomer bumpers provide excellent resistance to chemicals and humidity. 20 times greater durability than urethane.

10 greater durability than rubber and 500 times greater than steel coiled springs. Maintains excellent resilience at extreme temperatures and remains flexible with no material degradation between -62 oC and +148 Deg C (-80 Deg F and +300 Deg F). Mounting screws not included.

Click for combined categories: All Bumpers


Bumpers - Elastomer - Low Energy Absorption - Longer Stroke - Soft Stop

Bumpers - Elastomer - Low Energy Absorption - Longer Stroke - Soft Stop

Elastomer bumpers provide excellent resistance to chemicals and humidity. 20 times greater durability than urethane.

10 greater durability than rubber and 500 times greater than steel coiled springs. Maintains excellent resilience at extreme temperatures and remains flexible with no material degradation between -62 oC and +148 Deg C (-80 Deg F and +300 Deg F). Mounting screws not included.

Click for combined categories: All Bumpers


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafts - Idler

Shafts - Idler

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Shafts - Pinion

Shafts - Pinion


Click for combined categories: All Shafts


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Shafts - Stainless Steel

Splined Shafts - Stainless Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Splined Shafts - Steel

Splined Shafts - Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Shaft Locks

Hide Pictures

Go to Top  


Shaft Locks - Potentiometer

Shaft Locks - Potentiometer


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - Without Shaft

Rail Supports - Without Shaft

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearing in Housing

Linear Bearings


Rail Supports - With Shaft

Rail Supports - With Shaft

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings


Rail Supports - With Shaft - One Piece

Rail Supports - With Shaft - One Piece

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings

Frelon Linear Bearings


Clamps

Hide Pictures

Go to Top  


Clamps - Shaft - Split Type

Clamps - Shaft - Split Type


Clamps - Shaft - With Keyway

Clamps - Shaft - With Keyway


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Clamp Type - Long

Collars - Shaft - Clamp Type - Long

303 Stainless Steel

Maximum bore shown is the largest size you could machine the standard bore to.

Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Aluminium

Collars - Shaft - Clamp Type - One Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Collars - Shaft - Clamp Type - One Piece - Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Steel

Collars - Shaft - Clamp Type - One Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 316 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 316 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Aluminium

Collars - Shaft - Clamp Type - Two Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Steel

Collars - Shaft - Clamp Type - Two Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Fairloc

Collars - Shaft - Fairloc


Click for combined categories: All Shaft Collars


Collars - Shaft - Fastlock

Collars - Shaft - Fastlock

No tools required.

Usable for Nonhardened Shafts. Inner body and Outer sleeve: 303 Stainless, Balls: 440C Stainless, Spring: 302 Stainless.

Click for combined categories: All Shaft Collars


Collars - Shaft - Gripfast - 304 Stainless Steel

Collars - Shaft - Gripfast - 304 Stainless Steel

Self Locking - Quick Release.

304 Stainless Body, Retention Ring, Balls and Springs.

Click for combined categories: All Shaft Collars

Related Information:
Similar prodct Fastlock Collars

ABS Plastic Gripfast Collars


Collars - Shaft - Gripfast - ABS Plastic

Collars - Shaft - Gripfast - ABS Plastic

Self Locking - Quick Release.

265 kg Load Capacity (600 lbs). ABS Plastic Inner Body and Outer Sleeve. Steel Retention Ring, Balls and Springs.

Click for combined categories: All Shaft Collars

Related Information:
Similar prodct Fastlock Collars

304 Stainless Gripfast Collars


Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel

Collars - Shaft - Hex Bore - One Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hex Bore - One Piece - Steel

Collars - Shaft - Hex Bore - One Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel

Collars - Shaft - Hex Bore - Two Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hex Bore - Two Piece - Steel

Collars - Shaft - Hex Bore - Two Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Hex Bore Shaft Collars


Collars - Shaft - Hinged - Stainless Steel

Collars - Shaft - Hinged - Stainless Steel

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Hinged - Steel

Collars - Shaft - Hinged - Steel

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Long Series - Mild Steel

Collars - Shaft - Long Series - Mild Steel

Mild Steel. Chemically black (RoHS Compliant)

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft. It is recommended that you conduct your own testing for your application.

Click for combined categories: All Shaft Collars


Collars - Shaft - Standard - Stainless Steel

Collars - Shaft - Standard - Stainless Steel

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Collars - Shaft - Standard - Steel

Collars - Shaft - Standard - Steel

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Collars - Shaft - Stroke Adjustment - 303 Stainless

Collars - Shaft - Stroke Adjustment - 303 Stainless

Recommended tolerances for mating shaft diameter : h6. Use with rubber washers listed under WASHERS.

Click for combined categories: All Shaft Collars


Collars - Shaft - Stroke Adjustment - Steel

Collars - Shaft - Stroke Adjustment - Steel

Recommended tolerances for mating shaft diameter : h6. Use with rubber washers listed under WASHERS.

Click for combined categories: All Shaft Collars


Collars - Shaft - With Integral Shim

Collars - Shaft - With Integral Shim

Bore tolerance (+0.003/+0.013). Imperial Collars have undersized tolerances. Metric Collars have oversized tolerances.

Click for combined categories: All Shaft Collars


Clutches

Hide Pictures

Go to Top  


Clutches - Shaft Mounted

Clutches - Shaft Mounted

24 V DC - Zero Backlash Armature - For parallel loads.

This basic information is designed to assist you to make a decision on which clutch to use. Full dimensions available on request.

Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Extenders - Shaft

Extenders - Shaft

Miniature and large shaft extenders and reducers


Square Shaft

Hide Pictures

Go to Top  


Shafting - Linear - Square

Shafting - Linear - Square


Rollers

Hide Pictures

Go to Top  


Rollers - Durasoft - Shaft Mount - Black Neoprene

Rollers - Durasoft - Shaft Mount - Black Neoprene

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature.

Rollers - Durasoft - Shaft Mount - Coloured Urethane

Rollers - Durasoft - Shaft Mount - Coloured Urethane

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting.

Rollers - Solid - Shaft Mount - Black Neoprene

Rollers - Solid - Shaft Mount - Black Neoprene

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed.

Gearbox Output Shafts

Hide Pictures

Go to Top  


Gearboxes - Output Shafts - For E Type Helical Reducers

Gearboxes - Output Shafts - For E Type Helical Reducers

For use in Right Angle gearboxes with bores. E Series.

Stainless 303 shaft. Steel keys and circlips. E-X and E-DX types suitable for E type gearboxes (right angle types).

Click for combined categories: All Shafts


Gearboxes - Output Shafts - For P Type Worm Reducers

Gearboxes - Output Shafts - For P Type Worm Reducers

For use in Cross Axis gearboxes with bores. P and PF Series.

Stainless 303 shaft. Steel keys and circlips. P-X and P-DX types suitable for P and PF type gearboxes (cross axis types).

Click for combined categories: All Shafts


Couplings Other

Hide Pictures

Go to Top  


Couplings - Clutch - Shaft Mounted

Couplings - Clutch - Shaft Mounted

0.565 to 14 N.m. For in-line loads.

24 Volt DC. Zero Backlash Armature. For in-line loads. Dynamic torque is 80% of static torque. 0.565 N.m Models have no keyway in rotor.

Related Information:
Shafting


Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Reducers - Bore

Reducers - Bore

Inch to Metric / Inch to Inch / Metric to Metric. Brass reducing bushes.

S = Recommended set screw positions. C = Recommended position for single set screw fastening. T = Recommended position for tangential screw in clamp hub.

Ball Splines Linear

Hide Pictures

Go to Top  


Linear Ball Splines - Shaft

Linear Ball Splines - Shaft

Use with either flanged or unflanged Linear Ball Spline Bearings.


Click for combined categories: All Linear Ball Splines

Related Information:
Unflanged Bearings to Suit


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splines - Ball - Telescoping

Splines - Ball - Telescoping


Tensioners

Hide Pictures

Go to Top  


Tensioner - Drive - Single Adjusting - Shaft Mount

Tensioner - Drive - Single Adjusting - Shaft Mount

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Bushes - Flanged - Brass

Splined Bushes - Flanged - Brass

Internally splined bushes. Match with same size splined shafts.

Steel C45 (080M46) : ISO 14 (DIN 5463) Medium Series. Match bushes and shafts by Major Diameter. Phosphor Bronze : ISO 14 (DIN 5463) Medium Series. Machinable. (Tolerances do not follow ISO 14 Standard). Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Splined Bushes - Flanged - Steel

Splined Bushes - Flanged - Steel

Internally splined bushes. Match with same size splined shafts.

Steel C45 (080M46) : ISO 14 (DIN 5463) Medium Series. Match bushes and shafts by Major Diameter. Phosphor Bronze : ISO 14 (DIN 5463) Medium Series. Machinable. (Tolerances do not follow ISO 14 Standard). Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Splined Bushes - Unflanged - Steel

Splined Bushes - Unflanged - Steel

Internally splined bushes. Match with same size splined shafts.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Clutches

Hide Pictures

Go to Top  


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Click for combined categories: All Slip Clutches


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Bushes - Unflanged - Stainless Steel

Splined Bushes - Unflanged - Stainless Steel

Internally splined bushes. 416 stainless steel. Match with same size splined shafts.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Bushes

Related Information:
Stainless Steel Splined Shafts to Suit

Combined Splined Shafts List


Spacers

Hide Pictures

Go to Top  


Spacers - Round - Through Bore - Aluminium

Spacers - Round - Through Bore - Aluminium

Shaft spacers - Aluminium


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Spacers - Round - Through Bore - Brass

Spacers - Round - Through Bore - Brass

Shaft spacers - Brass


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Spacers - Round - Through Bore - Nylon

Spacers - Round - Through Bore - Nylon

Shaft spacers - Nylon


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Spacers - Round - Through Bore - Steel

Spacers - Round - Through Bore - Steel

Shaft spacers - Steel


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Open

Bearings - Linear - Ball - Open

For running on shafts supported by a rail along their length.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous.

Click for combined categories: All Linear Ball Bearings



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154812 products in 3732 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.