Flexible Gear Racks - Small Parts And Bearings Categories


Gear Racks Flexible

Hide Pictures

Go to Top  


Gears - Racks - Flexible - Guide Rails

Gears - Racks - Flexible - Guide Rails

For mounting flexirack. Flexible nylon or rigid aluminium guide rails.

Longer lengths in Nylon available on special order. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Flexible Gear Racks


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open (Ondrives)

Shafts - Flexible - Coupling Ends - Open (Ondrives)

Bi-directional flexible shaft couplings.

Hubs: 220 MO7 / Shaft: Steel. Standard bored ends. Keyways can be included in the bores for additional cost.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 13 - High Duty

Shafts - Flexible - Masterflex - Size 13 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  4 - High Duty

Shafts - Flexible - Masterflex - Size 4 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  5 - High Duty

Shafts - Flexible - Masterflex - Size 5 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  6 - Standard Duty

Shafts - Flexible - Masterflex - Size 6 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - High Duty

Shafts - Flexible - Masterflex - Size 8 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - Standard Duty

Shafts - Flexible - Masterflex - Size 8 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - High Duty

Shafts - Flexible - Masterflex - Size 9 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - Standard Duty

Shafts - Flexible - Masterflex - Size 9 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Cased

Shafts - Flexible - Coupling Ends - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Couplings Other

Hide Pictures

Go to Top  


Couplings - Disc - Flexible

Couplings - Disc - Flexible

High torque. No backlash. Clamp fixing.

Aluminium A2017 Hubs. Aluminium A2011 Spacer. Stainless Steel 301 Pin. Stainless Steel 303 Disc.

Gears Metric Racks

Hide Pictures

Go to Top  


Gears - Racks - Module 1

Gears - Racks - Module 1

20o Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 2

Gears - Racks - Module 2

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 3

Gears - Racks - Module 3

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Shafting General Purpose

Hide Pictures

Go to Top  


Shafts - Flexible - Panel Mount - Cased

Shafts - Flexible - Panel Mount - Cased

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Panel Mount - Open

Shafts - Flexible - Panel Mount - Open

See PDF file at bottom of internet page for Performance Data.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Gears Metric Racks

Hide Pictures

Go to Top  


Gears - Racks - Module 0.3

Gears - Racks - Module 0.3

20o Pressure Angle. Brass.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 0.4

Gears - Racks - Module 0.4

20o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 0.5

Gears - Racks - Module 0.5

20o Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 0.8

Gears - Racks - Module 0.8

20o Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 1.5

Gears - Racks - Module 1.5

20o Pressure Angle. Carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 2.5

Gears - Racks - Module 2.5

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Latches

Hide Pictures

Go to Top  


Latches - Draw - Flexible - T-Handle - Non Conductive

Latches - Draw - Flexible - T-Handle - Non Conductive

No metal parts. UV resistant, self aligning. Inbuilt drag prevents handle flopping. Steady state clamp force 4.4kg. Mounts with M5 screws or 4.76mm (3/16 in.) rivets. Keeper included.

Thermoplastic elastomer.

Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks -  1/10 Pitch

Gears - Racks - 1/10 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  1/20 Pitch

Gears - Racks - 1/20 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears Metric Racks

Hide Pictures

Go to Top  


Gears - Racks - Module 0.75

Gears - Racks - Module 0.75

20o Pressure Angle. Brass and stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 1.25

Gears - Racks - Module 1.25

20o Pressure Angle. Acetal.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks - 120 Diametrical Pitch

Gears - Racks - 120 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  64 Diametrical Pitch

Gears - Racks - 64 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  72 Diametrical Pitch

Gears - Racks - 72 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  80 Diametrical Pitch

Gears - Racks - 80 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  96 Diametrical Pitch

Gears - Racks - 96 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks - 10 Diametrical Pitch - 14.5 Degree

Gears - Racks - 10 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  12 Diametrical Pitch - 14.5 Degree

Gears - Racks - 12 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  16 Diametrical Pitch - 14.5 Degree

Gears - Racks - 16 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Nylon.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks - 20 Diametrical Pitch - 14.5 Degree

Gears - Racks - 20 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  24 Diametrical Pitch - 14.5 Degree

Gears - Racks - 24 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  24 Diametrical Pitch - 20 Degree

Gears - Racks - 24 Diametrical Pitch - 20 Degree

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  32 Diametrical Pitch - 14.5 Degree

Gears - Racks - 32 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  32 Diametrical Pitch - 20 Degree

Gears - Racks - 32 Diametrical Pitch - 20 Degree

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  48 Diametrical Pitch - 14.5 Degree

Gears - Racks - 48 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  48 Diametrical Pitch - 20 Degree

Gears - Racks - 48 Diametrical Pitch - 20 Degree

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  6 Diametrical Pitch - 14.5 Degree

Gears - Racks - 6 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  8 Diametrical Pitch - 14.5 Degree

Gears - Racks - 8 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears Metric Stem

Hide Pictures

Go to Top  


Gears - Spur - Module 1 - Stem

Gears - Spur - Module 1 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2 - Stem

Gears - Spur - Module 2 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 0.5 - Stem

Gears - Spur - Module 0.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.8 - Stem

Gears - Spur - Module 0.8 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 1.5 - Stem

Gears - Spur - Module 1.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 2.5 - Stem

Gears - Spur - Module 2.5 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Gears - Spur - Module 0.75 - Stem

Gears - Spur - Module 0.75 - Stem

Gears with integral shafts.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Metric Stem Gears


Spur Gear Stock Metric

Hide Pictures

Go to Top  


Gears - Spur - Stock - Module 0.4 - Carbon Steel

Gears - Spur - Stock - Module 0.4 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 0.5 - Carbon Steel

Gears - Spur - Stock - Module 0.5 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 0.8 - Carbon Steel

Gears - Spur - Stock - Module 0.8 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears - Spur - Stock - Module 1 - Carbon Steel

Gears - Spur - Stock - Module 1 - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gear Stock


Gears Imperial Spur

Hide Pictures

Go to Top  


Gears - Spur - 120 Diametrical Pitch - Hub Mounting

Gears - Spur - 120 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  24 Diametrical Pitch - Hub Mounting

Gears - Spur - 24 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  32 Diametrical Pitch - Hub Mounting

Gears - Spur - 32 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  48 Diametrical Pitch - Hub Mounting

Gears - Spur - 48 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  64 Diametrical Pitch - Hub Mounting

Gears - Spur - 64 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  72 Diametrical Pitch - Hub Mounting

Gears - Spur - 72 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  80 Diametrical Pitch - Hub Mounting

Gears - Spur - 80 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Gears - Spur -  96 Diametrical Pitch - Hub Mounting

Gears - Spur - 96 Diametrical Pitch - Hub Mounting

Suits hub and cluster gears 9.525mm (3/8) mounting diameter as listed on this site. Aluminium, stainless steel and acetal.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gears


Spur Gear Stock Imperial

Hide Pictures

Go to Top  


Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 20 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 24 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 32 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Gears - Spur - Stock - 48 Diametrical Pitch - Carbon Steel

Lengths of spur gear stock for manufacturing gears.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Spur Gear Stock


Gear Blanks

Hide Pictures

Go to Top  


Gears - Blanks

Gears - Blanks

Blanks for cutting gears and pulleys and friction drives.


Hobby Gears

Hide Pictures

Go to Top  


Hobby Gears - Spur - 48DP

Hobby Gears - Spur - 48DP

A small selection of popular 48DP Plastic/ Metal Pinion and Spur gears

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a 48DP spur gear, divide multiply the no of teeth by 0.52917.

Hobby Gears - Spur - Module 0.4

Hobby Gears - Spur - Module 0.4

A small selection of popular Module 0.4 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.4 spur gear with 20 teeth has a pitch diameter of 8mm. A module 0.4 spur gear with 10 teeth has a pitch diameter of 4mm.

Hobby Gears - Spur - Module 0.5

Hobby Gears - Spur - Module 0.5

A small selection of popular Module 0.5 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.5 spur gear with 20 teeth has a pitch diameter of 10mm. A module 0.5 spur gear with 10 teeth has a pitch diameter of 5mm.

Gears Cluster

Hide Pictures

Go to Top  


Gears - Cluster - 48 Diametrical Pitch

Gears - Cluster - 48 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears - Cluster - 64 Diametrical Pitch

Gears - Cluster - 64 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears - Cluster - 72 Diametrical Pitch

Gears - Cluster - 72 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears - Cluster - 80 Diametrical Pitch

Gears - Cluster - 80 Diametrical Pitch

Have a mounting area for a second gear - see diagram.

All have a 20 deg. Pressure Angle. Mounting diameter 9.525 (+0.008 / -0.000) mm (3/8 in.). Mounting area width 3.175 mm (1/8 in.). See diagram for mounting position of second gear. Combine with a gear from the listings under Gears - Spur . - Hub Mounting.

Click for combined categories: All Cluster Gears


Gears Metric Spur

Hide Pictures

Go to Top  


Gears - Spur - Module 1

Gears - Spur - Module 1

PCD = No. of Teeth x 1.000mm. 20o Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 2

Gears - Spur - Module 2

PCD = No. of Teeth x 2.000mm. 20o Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 3

Gears - Spur - Module 3

PCD = No. of Teeth x 3.000mm. 20o Pressure Angle. 303 stainless steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.15

Gears - Spur - Module 0.15

PCD = No. of Teeth x 0.150mm. 20o Pressure Angle. Brass.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.25

Gears - Spur - Module 0.25

PCD = No. of Teeth x 0.250mm. 20o Pressure Angle. Brass and carbon steel.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.3

Gears - Spur - Module 0.3

PCD = No. of Teeth x 0.300mm. 20o Pressure Angle. Brass.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.4

Gears - Spur - Module 0.4

PCD = No. of Teeth x 0.400mm. 20o Pressure Angle. 416 stainless steel, acetal, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.5

Gears - Spur - Module 0.5

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.7

Gears - Spur - Module 0.7

PCD = No. of Teeth x 0.700mm. 20o Pressure Angle. Acetal.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.75

Gears - Spur - Module 0.75

PCD = No. of Teeth x 0.750mm. 20o Pressure Angle. Brass.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 0.8

Gears - Spur - Module 0.8

PCD = No. of Teeth x 0.800mm. 20o Pressure Angle. 2024 aluminium, 303 stainless steel, 416 stainless, acetal, AISI4135 steel, brass and carbon steel.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 1.25

Gears - Spur - Module 1.25

PCD = No. of Teeth x 1.250mm. 20o Pressure Angle. 303 stainless steel and acetal.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 1.5

Gears - Spur - Module 1.5

PCD = No. of Teeth x 1.500mm. 20o Pressure Angle. 303 stainless steel, acetal, AISI4135 steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears - Spur - Module 2.5

Gears - Spur - Module 2.5

PCD = No. of Teeth x 2.500mm. 20o Pressure Angle. 303 stainless steel, carbon steel and nylon.

Metallic and plastic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears


Gears Imperial Worms

Hide Pictures

Go to Top  


Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.