Flat Belts - Small Parts And Bearings Categories


We are currently closed for stocktake and Easter. Online, e-mail and fax orders placed during this time will be processed on Tuesday 22nd April. Please have a Happy Easter.



Pulleys Flat Belt

Hide Pictures

Go to Top  


Pulleys - Flat Belt

Pulleys - Flat Belt

Polycarbonate pulleys for flat belts 6mm or 6.35mm wide.

Aluminium Knurled Inserts. Gold Iridite Brass Knurled Inserts. Set Screw Locking.

Click for combined categories: All Flat Belt Pulleys

Related Information:
Flat Belts

Drive Tighteners


Pulleys - Flat Belt - Idler - Heavy Duty

Pulleys - Flat Belt - Idler - Heavy Duty

Complete with Needle Roller Bearing.

Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Click for combined categories: All Flat Belt Pulleys

Related Information:
Flat Belts

Idler Shafts


Testers

Hide Pictures

Go to Top  


Belt Tension Tester

Belt Tension Tester

For testing the tension on assembled timing belts, vee belts, flat belts etc.

Gauges for testing all types of belts when assembled for correct tension.

Related Information:
Timing Belts


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - PVC

Washers - Flat - PVC

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Fibre

Hide Pictures

Go to Top  


Washers - Flat - Fibre

Washers - Flat - Fibre

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 Deg C. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - Nylon

Washers - Flat - Nylon

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Aluminium

Washers - Flat - Aluminium

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Mild Steel

Washers - Flat - Mild Steel

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Commercial

Washers - Flat - Brass - Commercial

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Titanium - CP Grade 1

Washers - Flat - Titanium - CP Grade 1

Flat washers. CP Grade 1 Titanium.

CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Sintered Bronze - Precision

Washers - Flat - Sintered Bronze - Precision

Flat thrust washers made from oil impregnated sintered bronze

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Commercial

Washers - Flat - Stainless Steel - Commercial

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Precision Ground

Washers - Flat - Stainless Steel - Precision Ground

Non magnetic and corrosion resistant. Sides are flat and parallel to within 0.025mm (0.001 in.)

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Carbon Spring Steel - Precision Shim

Washers - Flat - Carbon Spring Steel - Precision Shim

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gamg cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - Peek

Washers - Flat - Peek

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - PTFE

Washers - Flat - PTFE

Teflon Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Rubber

Hide Pictures

Go to Top  


Washers - Flat - Rubber

Washers - Flat - Rubber

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - High Tensile

Washers - Flat - High Tensile

Grade 8 high tensile washers

ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Hardened Steel

Washers - Flat - Hardened Steel

Medium carbon steel through hardened to RC 43-49. Zinc dichromate finish. All dimensions shows are minimum.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Bonded Neoprene

Washers - Flat - Bonded Neoprene

Galvanised sealing washers with neoprene centre for use with self drilling screws

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Precision

Washers - Flat - Brass - Precision

Precision Tolerances. Laminated brass shim washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Precision Shim

Washers - Flat - Stainless Steel - Precision Shim

Precision Tolerances.


Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stamped - Heavy Duty - Hardened

Washers - Flat - Stamped - Heavy Duty - Hardened

Heat treated. Black oxide finish.

Click for combined categories: All Flat Washers and Spacers - Metallic


Belts and Pulleys Conidrive

Hide Pictures

Go to Top  


Belts - Conidrive N10

Belts - Conidrive N10

Self Guided Belts - 10mm Pitch.

-30 to +80o Celsius. Low noise and vibration. No flanges needed on pulleys for guidance. Polyurethane Reinforced with Steel Tensile Cords. Very precise alternative to timing belts. No need for pulley flanges.

Related Information:
Timing Belts

Conidrive Pulleys


Timing Belt Lengths

Hide Pictures

Go to Top  


Belts - Timing - Lengths

Belts - Timing - Lengths

Sold per meter - Refer diagrams in timing belt listings for aspects of various pitches.

Lengths of timing belt stock are used for reciprocating applications. Not meant to be joined. For easy ready selected sets of timing belts and pulleys please see the HES website.

Vee Belts

Hide Pictures

Go to Top  


Belts - Vee -  5.0 x 3.0mm

Belts - Vee - 5.0 x 3.0mm

Miniature and small belts. 5.0mm Top Width x 3.0mm Height.

Sizes are nominal and may vary slightly.

Click for combined categories: All Vee Belts 5 and 6mm Top Width


Belts - Vee -  8.0 x 4.0mm

Belts - Vee - 8.0 x 4.0mm

Miniature and small belts. 8.0mm Top Width x 4.0mm Height.

Sizes are nominal and may vary slightly.

Click for combined categories: All Vee Belts 8mm and 10mm Top Width


Belts and Pulleys Conidrive

Hide Pictures

Go to Top  


Belts - Conidrive N10 - Lengths

Belts - Conidrive N10 - Lengths

Self Guided Belts - 10mm Pitch - Sold by the metre.

-30 to +80o Celsius. Self guiding system - no pulley flanges required. For metering, positioning and oscillating systems. Polyurethane Reinforced with Steel Tensile Cords. Orders for more than one metre will be supplied as a continuous length up to the max length shown.

Related Information:
Timing Belts

Conidrive Pulleys


Vee Belts

Hide Pictures

Go to Top  


Belts - Vee - 10.0 x 6.0mm - Z

Belts - Vee - 10.0 x 6.0mm - Z

Miniature and small belts. 10.0mm Top Width x 6.0mm Height.

Sizes are nominal and may vary slightly.

Click for combined categories: All Vee Belts 8mm and 10mm Top Width

Click for combined categories: All Vee and Wedge Belts around 10mm Top Width


Belts - Vee -  6.0 x 4.0mm - Y

Belts - Vee - 6.0 x 4.0mm - Y

Miniature and small belts. 6.0mm Top Width x 4.0mm Height.

Sizes are nominal and may vary slightly.

Click for combined categories: All Vee Belts 5 and 6mm Top Width


Belts - Vee -  6.4 x 4.1mm - 2L

Belts - Vee - 6.4 x 4.1mm - 2L

Miniature and small belts. 6.4mm Top Width x 4.1mm Height.

Sizes are nominal and may vary slightly.

Click for combined categories: All Vee Belts 5 and 6mm Top Width


Belts - Vee - 10.0 x 5.5mm - M/3L

Belts - Vee - 10.0 x 5.5mm - M/3L

Miniature and small belts. 10.0mm Top Width x 5.5mm Height.

Sizes are nominal and may vary slightly. Items marked as Fractional Horsepower are designed for general purrpose low horseposer applications such as laundry machines, home workshop tools, small fans and blowers, garage equipment, small metal and woodworking tools etc. Belts shown as Fractional Horsepower type should not be used with reverse side idlers.

Click for combined categories: All Vee Belts 8mm and 10mm Top Width

Click for combined categories: All Vee and Wedge Belts around 10mm Top Width

Related Information:
Vee Pulleys - M / 3L Section - Aluminium

Vee Pulleys - M / 3L Section - Cast Iron


Belts - Wedge -  9.7 x 8.0mm - SPZ / 3V

Belts - Wedge - 9.7 x 8.0mm - SPZ / 3V

Miniature and small belts. 9.7mm Top Width x 8.0mm Height.

Sizes are nominal and may vary slightly.

Click for combined categories: All Wedge Belts 9.5 and 9.7mm Top Width

Click for combined categories: All Vee and Wedge Belts around 10mm Top Width


Timing Belts and Pulleys 1.0mm

Hide Pictures

Go to Top  


Belts - Timing -  1.000mm Pitch - 3mm Wide

Belts - Timing - 1.000mm Pitch - 3mm Wide

Miniature 1mm series timing belts. 3mm Wide +/- 0.2mm

Pitch (P) - 1.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 1mm Pitch Timing Belts

Related Information:
Pulley Stock - 1.000mm Pitch

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  1.000mm Pitch - 6mm Wide

Belts - Timing - 1.000mm Pitch - 6mm Wide

Miniature 1mm series timing belts. 6mm Wide +/- 0.2mm

Pitch (P) - 1.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.41mm. Belt Height (W) - 0.97mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 1mm Pitch Timing Belts

Related Information:
Pulley stock - 1.000mm Pitch

For simple ready selected sets of timing belts and pulleys please see the HES website


Timing Belts and Pulleys 1.5mm

Hide Pictures

Go to Top  


Belts - Timing -  1.500mm Pitch - GT - 3mm Wide

Belts - Timing - 1.500mm Pitch - GT - 3mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 1.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.56mm. Belt Height (W) - 1.00mm.

Click for combined categories: All 1.5mm Pitch Timing Belts


Timing Belts and Pulleys 12.7mm

Hide Pictures

Go to Top  


Belts - Timing - 12.700mm Pitch - H - 10mm Wide

Belts - Timing - 12.700mm Pitch - H - 10mm Wide

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. For easy ready selected sets of timing belts and pulleys please see the HES website.

Belts - Timing - 12.700mm Pitch - H - 15mm Wide

Belts - Timing - 12.700mm Pitch - H - 15mm Wide

Standard Series Timing Belts 12.700mm or 0.500 inch pitch.

Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. For easy ready selected sets of timing belts and pulleys please see the HES website.

Timing Belts and Pulleys 2.0mm

Hide Pictures

Go to Top  


Belts - Timing -  2.000mm Pitch - GT - 3mm Wide

Belts - Timing - 2.000mm Pitch - GT - 3mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.45mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 2mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.000mm Pitch - GT - 4mm Wide

Belts - Timing - 2.000mm Pitch - GT - 4mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.75mm. Belt Height (W) - 1.45mm. For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 2mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.000mm Pitch - GT - 6mm Wide

Belts - Timing - 2.000mm Pitch - GT - 6mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.45mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 2mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 6mm wide belts - 2.000mm GT Pitch

Pulleys stock - 2.000mm GT Pitch.


Belts - Timing -  2.000mm Pitch - GT - 9mm Wide

Belts - Timing - 2.000mm Pitch - GT - 9mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 2.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 0.76mm. Belt Height (W) - 1.45mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 2mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Timing Belts and Pulleys 3.0mm

Hide Pictures

Go to Top  


Belts - Timing -  3.000mm Pitch - GT - 6mm Wide

Belts - Timing - 3.000mm Pitch - GT - 6mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Pulleys stock - 3.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  3.000mm Pitch - GT - 9mm Wide

Belts - Timing - 3.000mm Pitch - GT - 9mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9mm wide belts - 3.000mm GT Pitch.

Pulleys stock - 3.000mm GT Pitch.


Timing Belts and Pulleys 5.08mm XL (1/5in)

Hide Pictures

Go to Top  


Belts - Timing -  5.080mm Pitch - XL -12mm Wide

Belts - Timing - 5.080mm Pitch - XL -12mm Wide

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All XL 5.08mm Pitch Timing Belts


Belts - Timing -  5.080mm Pitch - XL - 6mm Wide

Belts - Timing - 5.080mm Pitch - XL - 6mm Wide

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All XL 5.08mm Pitch Timing Belts


Belts - Timing -  5.080mm Pitch - XL - 8mm Wide

Belts - Timing - 5.080mm Pitch - XL - 8mm Wide

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All XL 5.08mm Pitch Timing Belts


Timing Belts and Pulleys 5.0mm

Hide Pictures

Go to Top  


Belts - Timing -  5.000mm Pitch - T5 - 6mm Wide

Belts - Timing - 5.000mm Pitch - T5 - 6mm Wide

T Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Pulleys stock - 5.000mm T Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Timing Belts and Pulleys 9.525mm L (3/8in)

Hide Pictures

Go to Top  


Belts - Timing -  9.525mm Pitch - L - 19mm Wide

Belts - Timing - 9.525mm Pitch - L - 19mm Wide

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Click for combined categories: All L 9.525mm Pitch Timing Belts

Related Information:
Metallic pulleys to suit 19mm wide belts - 9.525mm L Pitch.

Pulleys stock - 9.525mm L Pitch.


Belts - Timing -  9.525mm Pitch - L - 25mm Wide

Belts - Timing - 9.525mm Pitch - L - 25mm Wide

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Click for combined categories: All L 9.525mm Pitch Timing Belts


Vee Belts

Hide Pictures

Go to Top  


Belts - Wedge -  9.5 x 7.9mm - Notched XPZ / 3VX

Belts - Wedge - 9.5 x 7.9mm - Notched XPZ / 3VX

Miniature and small belts. 9.5mm Top Width x 7.9mm Height.


Click for combined categories: All Wedge Belts 9.5 and 9.7mm Top Width

Click for combined categories: All Vee and Wedge Belts around 10mm Top Width


Timing Belts and Pulleys 10mm

Hide Pictures

Go to Top  


Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

Belts - Timing - 10.000mm Pitch - AT10 - 32mm Wide

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 10.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.50mm. Belt Height (W) - 4.50mm - Corner Radii ( r )- 0.60mm.

Click for combined categories: All 10mm Pitch Timing Belts


Timing Belts and Pulleys 2.032mm MXL

Hide Pictures

Go to Top  


Belts - Timing -  2.032mm Pitch - MXL - 3mm Wide

Belts - Timing - 2.032mm Pitch - MXL - 3mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL - 4.76mm Wide

Belts - Timing - 2.032mm Pitch - MXL - 4.76mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 4.5mm to 4.76mm (3/16 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL - 6mm Wide

Belts - Timing - 2.032mm Pitch - MXL - 6mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 6.0mm to 6.35mm (1/4 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 6mm wide belts - 2.032mm MXL Pitch

Pulleys stock - 2.032mm MXL Pitch.


Belts - Timing -  2.032mm Pitch - MXL - 8mm Wide

Belts - Timing - 2.032mm Pitch - MXL - 8mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 8.0mm and 7.93mm (5/16 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL - 9.5mm Wide

Belts - Timing - 2.032mm Pitch - MXL - 9.5mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 9.5mm and 9.53mm (3/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Timing Belts and Pulleys 2.073mm 40DP

Hide Pictures

Go to Top  


Belts - Timing -  2.073mm Pitch - 40DP - 3mm Wide

Belts - Timing - 2.073mm Pitch - 40DP - 3mm Wide

Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 40DP 2.073mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.073mm 40DP Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.073mm Pitch - 40DP - 4.5mm Wide

Belts - Timing - 2.073mm Pitch - 40DP - 4.5mm Wide

Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 40DP 2.073mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.073mm 40DP Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.073mm Pitch - 40DP - 6.0mm Wide

Belts - Timing - 2.073mm Pitch - 40DP - 6.0mm Wide

Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 40DP 2.073mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.073mm 40DP Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.073mm Pitch - 40DP - 8.0mm Wide

Belts - Timing - 2.073mm Pitch - 40DP - 8.0mm Wide

Standard Series Timing Belts 2.072mm or 0.08016 inch pitch.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 40DP 2.073mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.073mm 40DP Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Timing Belts and Pulleys 2.5mm

Hide Pictures

Go to Top  


Belts - Timing -  2.500mm Pitch - T2.5 - 10mm Wide

Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide

T Series Metric Timing Belts.

Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 2.5mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.500mm T2.5 Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.500mm Pitch - T2.5 - 4mm Wide

Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide

T Series Metric Timing Belts.

Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 2.5mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.500mm T2.5 Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.500mm Pitch - T2.5 - 6mm Wide

Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide

T Series Metric Timing Belts.

Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 2.5mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 6mm wide belts - 2.500mm T2.5 Pitch.

Pulleys stock - 2.500mm T2.5 Pitch.


Timing Belts and Pulleys 3.0mm

Hide Pictures

Go to Top  


Belts - Timing -  3.000mm Pitch - GT - 15mm Wide

Belts - Timing - 3.000mm Pitch - GT - 15mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts


Belts - Timing -  3.000mm Pitch - HTD - 6mm Wide

Belts - Timing - 3.000mm Pitch - HTD - 6mm Wide

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Pulleys stock - 3.000mm HTD Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  3.000mm Pitch - HTD - 9mm Wide

Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9mm wide belts - 3.000mm HTD Pitch.

Pulleys stock - 3.000mm HTD Pitch.


Timing Belts and Pulleys 5.08mm XL (1/5in)

Hide Pictures

Go to Top  


Belts - Timing -  5.080mm Pitch - XL - 9.5mm Wide

Belts - Timing - 5.080mm Pitch - XL - 9.5mm Wide

Standard Series Timing Belts 5.080mm or 0.200 inch pitch.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.30mm. Belt Height (W) - 2.30mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All XL 5.08mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9.5mm wide belts - 5.080mm XL Pitch.

Pulleys stock - 5.080mm XL Pitch.


Timing Belts and Pulleys 5.0mm

Hide Pictures

Go to Top  


Belts - Timing -  5.000mm Pitch - AT5 - 10mm Wide

Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide

AT Synchroflex Generation III Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.

Click for combined categories: All 5mm Pitch Timing Belts


Belts - Timing -  5.000mm Pitch - HTD - 15mm Wide

Belts - Timing - 5.000mm Pitch - HTD - 15mm Wide

HTD Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 15mm wide belts - 5.000mm HTD Pitch.

Pulleys stock - 5.000mm HTD Pitch.


Belts - Timing -  5.000mm Pitch - HTD - 6mm Wide

Belts - Timing - 5.000mm Pitch - HTD - 6mm Wide

HTD Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts


Belts - Timing -  5.000mm Pitch - HTD - 9mm Wide

Belts - Timing - 5.000mm Pitch - HTD - 9mm Wide

HTD Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9mm wide belts - 5.000mm HTD Pitch.

Pulleys stock - 5.000mm HTD Pitch.


Belts - Timing -  5.000mm Pitch - T5 - 10mm Wide

Belts - Timing - 5.000mm Pitch - T5 - 10mm Wide

T Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 10mm wide belts - 5.000mm T Pitch.

Pulleys stock - 5.000mm T Pitch.


Belts - Timing -  5.000mm Pitch - T5 - 15mm Wide

Belts - Timing - 5.000mm Pitch - T5 - 15mm Wide

T Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.20mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Pulleys stock - 5.000mm T Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Timing Belts and Pulleys 9.525mm L (3/8in)

Hide Pictures

Go to Top  


Belts - Timing -  9.525mm Pitch - L - 12.5mm Wide

Belts - Timing - 9.525mm Pitch - L - 12.5mm Wide

Standard Series Timing Belts 9.525mm or 0.375 inch pitch.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 3.56mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Click for combined categories: All L 9.525mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 12.5mm wide belts - 9.525mm L Pitch.

Pulleys stock - 9.525mm L Pitch.


Belts - Timing -  9.525mm Pitch - L Double Sided -19mm

Belts - Timing - 9.525mm Pitch - L Double Sided -19mm

Standard Series Timing Belts 9.525mm or 0.375 inch pitch - Double Sided.

Pitch (P) - 9.525mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 3.25mm. Tooth Height (H) - 1.90mm. Belt Height (W) - 4.60mm - Corner Radii ( r ) - 0.50mm. Breaking strength is not indicative of working strength.

Click for combined categories: All L 9.525mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 19mm wide belts - 9.525mm L Pitch.

Pulleys stock - 9.525mm L Pitch.


Timing Belts and Pulleys 2.032mm MXL

Hide Pictures

Go to Top  


Belts - Timing -  2.032mm Pitch - MXL Double Sided - 3mm Wide

Belts - Timing - 2.032mm Pitch - MXL Double Sided - 3mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch - Double Sided. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL Double Sided - 4.76mm Wide

Belts - Timing - 2.032mm Pitch - MXL Double Sided - 4.76mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 4.5mm to 4.76mm (3/16 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL Double Sided - 6mm Wide

Belts - Timing - 2.032mm Pitch - MXL Double Sided - 6mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 6.0mm to 6.35mm (1/4 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 6mm wide belts - 2.032mm MXL Pitch

Pulleys stock - 2.032mm MXL Pitch.


Belts - Timing -  2.032mm Pitch - MXL Double Sided - 9.5mm Wide

Belts - Timing - 2.032mm Pitch - MXL Double Sided - 9.5mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 9.5mm and 9.53mm (3/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.51mm. Belt Height (W) - 1.52mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL TruMotion - 3mm Wide

Belts - Timing - 2.032mm Pitch - MXL TruMotion - 3mm Wide

PowerGripR TruMotion® Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotionR belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotionR belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs comliant.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL TruMotion - 4.5mm Wide

Belts - Timing - 2.032mm Pitch - MXL TruMotion - 4.5mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL TruMotion  - 6.0mm Wide

Belts - Timing - 2.032mm Pitch - MXL TruMotion - 6.0mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 6mm wide belts - 2.032mm MXL Pitch

Pulleys stock - 2.032mm MXL Pitch.


Belts - Timing -  2.032mm Pitch - MXL TruMotion  - 8.0mm Wide

Belts - Timing - 2.032mm Pitch - MXL TruMotion - 8.0mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  2.032mm Pitch - MXL TruMotion  - 9.5mm Wide

Belts - Timing - 2.032mm Pitch - MXL TruMotion - 9.5mm Wide

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. Includes 3mm to 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Click for combined categories: All MXL 2.032mm Pitch Timing Belts

Related Information:
Pulleys stock - 2.032mm MXL Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Timing Belts and Pulleys 3.0mm

Hide Pictures

Go to Top  


Belts - Timing -  3.000mm Pitch - GT - Double Sided - 15mm Wide

Belts - Timing - 3.000mm Pitch - GT - Double Sided - 15mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts


Belts - Timing -  3.000mm Pitch - GT - Double Sided - 6mm Wide

Belts - Timing - 3.000mm Pitch - GT - Double Sided - 6mm Wide

GT Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Pulleys stock - 3.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  3.000mm Pitch - GT - Double Sided - 9mm Wide

Belts - Timing - 3.000mm Pitch - GT - Double Sided - 9mm Wide

GT Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9mm wide belts - 3.000mm GT Pitch.

Pulleys stock - 3.000mm GT Pitch.


Belts - Timing -  3.000mm Pitch - GT TruMotion - 6mm Wide

Belts - Timing - 3.000mm Pitch - GT TruMotion - 6mm Wide

PowerGripR TruMotion® Timing Belts in 3.000mm.

The TruMotionR belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oF to +220oF, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Pulleys stock - 3.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  3.000mm Pitch - GT TruMotion - 9mm Wide

Belts - Timing - 3.000mm Pitch - GT TruMotion - 9mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9mm wide belts - 3.000mm GT Pitch.

Pulleys stock - 3.000mm GT Pitch.


Belts - Timing -  3.000mm Pitch - HTD Double Sided - 6mm Wide

Belts - Timing - 3.000mm Pitch - HTD Double Sided - 6mm Wide

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Pulleys stock - 3.000mm HTD Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  3.000mm Pitch - HTD Double Sided - 9mm Wide

Belts - Timing - 3.000mm Pitch - HTD Double Sided - 9mm Wide

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 3mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9mm wide belts - 3.000mm HTD Pitch.

Pulleys stock - 3.000mm HTD Pitch.


Timing Belts and Pulleys 5.08mm XL (1/5in)

Hide Pictures

Go to Top  


Belts - Timing -  5.080mm Pitch - XL Double Sided - 6mm Wide

Belts - Timing - 5.080mm Pitch - XL Double Sided - 6mm Wide

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All XL 5.08mm Pitch Timing Belts


Belts - Timing -  5.080mm Pitch - XL Double Sided - 8mm Wide

Belts - Timing - 5.080mm Pitch - XL Double Sided - 8mm Wide

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All XL 5.08mm Pitch Timing Belts


Belts - Timing -  5.080mm Pitch - XL Double Sided - 9.5mm Wide

Belts - Timing - 5.080mm Pitch - XL Double Sided - 9.5mm Wide

Standard Series Timing Belts 5.080mm or 0.200 inch pitch - Double Sided.

Pitch (P) - 5.080mm (0.200 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.40mm. Tooth Height (H) - 1.20mm. Belt Height (W) - 3.00mm - Corner Radii ( r ) - 0.40mm. Breaking strength is not indicative of working strength.

Click for combined categories: All XL 5.08mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 9.5mm wide belts - 5.080mm XL Pitch.

Pulleys stock - 5.080mm XL Pitch.


Timing Belts and Pulleys 5.0mm

Hide Pictures

Go to Top  


Belts - Timing -  5.000mm Pitch - GT - Double Sided - 15mm Wide

Belts - Timing - 5.000mm Pitch - GT - Double Sided - 15mm Wide

GT Series Metric Timing Belts Double Sided

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Pulleys stock - 5.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  5.000mm Pitch - GT - Double Sided - 9mm

Belts - Timing - 5.000mm Pitch - GT - Double Sided - 9mm

GT Series Metric Timing Belts Double Sided

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 5.00mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Pulleys stock - 5.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  5.000mm Pitch - GT - TRUE METRIC - 15mm Wide

Belts - Timing - 5.000mm Pitch - GT - TRUE METRIC - 15mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Pulleys stock - 5.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  5.000mm Pitch - GT - TRUE METRIC - 9mm Wide

Belts - Timing - 5.000mm Pitch - GT - TRUE METRIC - 9mm Wide

GT Series Metric Timing Belts.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.93mm. Belt Height (W) - 3.81mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Pulleys stock - 5.000mm GT Pitch.

For simple ready selected sets of timing belts and pulleys please see the HES website


Belts - Timing -  5.000mm Pitch - HTD Double Sided -15mm Wide

Belts - Timing - 5.000mm Pitch - HTD Double Sided -15mm Wide

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 2.08mm. Belt Height (W) - 5.30mm. Breaking strength is not indicative of working strength.

Click for combined categories: All 5mm Pitch Timing Belts

Related Information:
Plastic pulleys to suit 15mm wide belts - 5.000mm HTD Pitch.

Pulleys stock - 5.000mm HTD Pitch.



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.