Extension Springs - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

AST-SPR-EX-COM-B-0200 found in Assortment Kits - Various
Selection: Springs. Quantity Per Kit: 200. Description: 19 sizes of extension and 5 sizes of compression springs.

Stock: 8



Springs Extension

Hide Pictures

Go to Top  


Springs - Extension - Music Wire

Springs - Extension - Music Wire

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 Deg C (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 Deg C (500 Deg F). 302 stainless steel is slightly magnetic.

Click for combined categories: All Extension Springs


Springs - Extension - Stainless Steel

Springs - Extension - Stainless Steel

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 Deg C (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 Deg C (500 Deg F). 302 stainless steel is slightly magnetic.

Click for combined categories: All Extension Springs


Spring Anchors

Hide Pictures

Go to Top  


Anchors - Spring - Steel

Anchors - Spring - Steel

An economical way to secure the ends of extension springs, and provide easy adjustment.

C-12114 Steel with Black Oxide Finsh.

Click for combined categories: All Spring Anchors


Anchors - Spring - Stainless Steel

Anchors - Spring - Stainless Steel

An economical way to secure the ends of extension springs, and provide easy adjustment.

300 Grade Stainless Steel.

Click for combined categories: All Spring Anchors


Tools Threading

Hide Pictures

Go to Top  


Tools - Taps - High Speed Steel - Extension

Tools - Taps - High Speed Steel - Extension

Intermediate small shank spiral point extension taps 150mm long


Click for combined categories: All Taps

Click for combined categories: All Tools


Springs Compression

Hide Pictures

Go to Top  


Springs - Drawbar - Zinc Plated

Springs - Drawbar - Zinc Plated

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Click for combined categories: All Drawbar Springs


Springs - Drawbar - Stainless Steel

Springs - Drawbar - Stainless Steel

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Click for combined categories: All Drawbar Springs


Spring Assemblies

Hide Pictures

Go to Top  


Spring Assemblies - Single - RINO

Spring Assemblies - Single - RINO

Spring: Stainless Steel 301 S21 Grade. Other Parts: Pressed Mild Steel, Zinc Plate and clear passivated. Temp Max 200 Deg C / Min -200 Deg C. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Click for combined categories: All Spring Assemblies


Spring Assemblies - Twin - RINO

Spring Assemblies - Twin - RINO

Spring: Stainless Steel 301 S21 Grade. Other Parts: Pressed Mild Steel, Zinc Plate and clear passivated. Temp Max 200 Deg C / Min -200 Deg C. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Click for combined categories: All Spring Assemblies


Spring Assemblies - Bracket - RINO

Spring Assemblies - Bracket - RINO

Spring: Stainless Steel 301 S21 Grade. Bobbin and Bracket: Nylon Moulded secured to aluminium sheet. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring. End holes are centred at the distances and diameters shown in the tables.

Click for combined categories: All Spring Assemblies


Spring Assemblies - Small Bracket - RINO

Spring Assemblies - Small Bracket - RINO

Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Click for combined categories: All Spring Assemblies


Springs Constant Force

Hide Pictures

Go to Top  


Springs - Constant Force

Springs - Constant Force

301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Spring Mounts

Hide Pictures

Go to Top  


Springs - Neoprene

Springs - Neoprene

Neoprene elastomer springs have proven to be the safest, most efficient material for punching, stamping and drawing dies.

Major advantages include high loads, increased durability, better performance, no maintenance and long life.

Click for combined categories: All Rubber Springs


Springs - Urethane

Springs - Urethane

Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.

They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80 Deg C.

Click for combined categories: All Rubber Springs


Springs Compression

Hide Pictures

Go to Top  


Springs - Compression - Conical

Springs - Compression - Conical

Conical 302 Stainless steel springs

Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate.

Click for combined categories: All Compression Springs


Spring Wire

Hide Pictures

Go to Top  


Wire - Steel - Spring - Music - Coils

Wire - Steel - Spring - Music - Coils

SAE 1090 Spring Steel.


Click for combined categories: All Spring Wire


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty

Springs - Die - Imperial - Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty

Springs - Die - Imperial - Medium Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Push Fit - Stainless

Plungers - Spring - Push Fit - Stainless

300 series stainless with 17-7 stainless spring


Click for combined categories: All Push Fit Spring Plungers


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Extra Heavy Duty

Springs - Die - Imperial - Extra Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium-Heavy Duty

Springs - Die - Imperial - Medium-Heavy Duty

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Spring Wire

Hide Pictures

Go to Top  


Wire - Steel - Spring - Music Wire - Short Lengths

Wire - Steel - Spring - Music Wire - Short Lengths

SAE 1090 Spring Steel.

Shipped in straight lengths on wood backing board.

Click for combined categories: All Spring Wire


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Duty - Chrome Silicon

Springs - Die - Imperial - Medium Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length.

Click for combined categories: All Imperial Die Springs

Click for combined categories: All All Die Springs


Springs General

Hide Pictures

Go to Top  


Posts - Spring

Posts - Spring

Related Information:
Metre Length Extension Springs


Spring Motors

Hide Pictures

Go to Top  


Spring Motors - SDP

Spring Motors - SDP

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Click for combined categories: All Spring Motors


Spring Motors - RINO

Spring Motors - RINO

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Click for combined categories: All Spring Motors


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Econoloc

Gas Springs - Econoloc


Click for combined categories: All Gas Springs


Gas Springs - End Fittings

Gas Springs - End Fittings


Click for combined categories: All Gas Springs


Gas Springs - Fixed Force

Gas Springs - Fixed Force


Click for combined categories: All Gas Springs


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 2 Wave Type

Washers - Spring - 2 Wave Type

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Spring Motors

Hide Pictures

Go to Top  


Spring Motor Assemblies - SDP

Spring Motor Assemblies - SDP

Base Mounted.

Base Mounted. Springs : 301 Stainless Steel.

Click for combined categories: All Spring Motors


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Plastic

Washers - Disc Spring - Plastic

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - PolysorbR material.

Click for combined categories: All Disc Springs


Air Springs

Hide Pictures

Go to Top  


Springs - Air - Convolute Bellows

Springs - Air - Convolute Bellows


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Adjustable Force

Gas Springs - Adjustable Force


Click for combined categories: All Gas Springs


Springs Anti Backlash

Hide Pictures

Go to Top  


Springs - Torsion - Anti Backlash

Springs - Torsion - Anti Backlash


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Push Fit - Steel

Plungers - Spring - Push Fit - Steel

Steel body and steel nose


Click for combined categories: All Push Fit Spring Plungers


Plungers - Spring - Threaded - Steel

Plungers - Spring - Threaded - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Carbon Steel

Washers - Disc Spring - Carbon Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Adjustable -  50-540N

Gas Springs - Adjustable - 50-540N

Body: Semi Matt Black Epoxy Paint. Finish: Black. Adjusted by Grubscrew. Once discharged, the gas is not refillable. Supplied filled to maximum force.

Click for combined categories: All Gas Springs


Gas Springs - Assembly End Fittings

Gas Springs - Assembly End Fittings


Click for combined categories: All Gas Springs


Spring Motors

Hide Pictures

Go to Top  


Spring Motor Assemblies - Open - RINO

Spring Motor Assemblies - Open - RINO

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.

Click for combined categories: All Spring Motors


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Metric - Heavy Duty

Springs - Die - Metric - Heavy Duty

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Click for combined categories: All Metric Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Metric - Light Duty

Springs - Die - Metric - Light Duty

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Click for combined categories: All Metric Die Springs

Click for combined categories: All All Die Springs


Springs - Die - Metric - Medium Duty

Springs - Die - Metric - Medium Duty

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Click for combined categories: All Metric Die Springs

Click for combined categories: All All Die Springs


Springs Torsion

Hide Pictures

Go to Top  


Springs - Torsion - Left Hand Wound

Springs - Torsion - Left Hand Wound

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.

Click for combined categories: All Torsion Springs


Springs - Torsion - Right Hand Wound

Springs - Torsion - Right Hand Wound

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.

Click for combined categories: All Torsion Springs


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Threaded - Stainless

Plungers - Spring - Threaded - Stainless

303 Stainless Steel.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Plungers - Spring - Threaded - Steel/Acetal

Plungers - Spring - Threaded - Steel/Acetal

Acetal nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Ball Bearing Type

Washers - Disc Spring - Ball Bearing Type

Specially designed for preloading ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Flange Locking Type

Washers - Disc Spring - Flange Locking Type

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Stainless Steel

Washers - Disc Spring - Stainless Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - Curved - Spring Steel

Washers - Spring - Curved - Spring Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers - Spring - Curved - Stainless Steel

Washers - Spring - Curved - Stainless Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Adjustable - Accessories

Gas Springs - Adjustable - Accessories

See diagrams in main Gas Springs Categories.

Click for combined categories: All Gas Springs


Spring Reels

Hide Pictures

Go to Top  


Reels - Spring Powered - Arbor Mounted

Reels - Spring Powered - Arbor Mounted

Mounting studs sold seperately.

Used in counterbalances, door closers, cable retractors, hose retreivers, tool head returns, cabinets and furniture. Mounting studs sold seperately.

Click for combined categories: All Reels

Related Information:
Arbor Mounting Stud


Reels - Spring Powered - Bracket Mounted

Reels - Spring Powered - Bracket Mounted

Applications: Counterbalances, door closers, cable retractors. Applications: Hose retreivers, tool head returns, cabinets and furniture.

Click for combined categories: All Reels


Springs Compression

Hide Pictures

Go to Top  


Springs - Compression - Standard - Steel

Springs - Compression - Standard - Steel

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Click for combined categories: All Compression Springs

Related Information:
Stainless Steel Compression Springs


Springs Die

Hide Pictures

Go to Top  


Springs - Die - Metric - Extra Heavy Duty

Springs - Die - Metric - Extra Heavy Duty

Colour coded yellow

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Click for combined categories: All Metric Die Springs

Click for combined categories: All All Die Springs


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Acetal Handle - Locking - Steel

Plungers - Spring - Acetal Handle - Locking - Steel

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Steel

Plungers - Spring - Knurled Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Stainless

Plungers - Spring - L Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Steel

Plungers - Spring - L Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Non Locking - Steel

Plungers - Spring - L Handle - Non Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Push Fit - Stainless/Acetal

Plungers - Spring - Push Fit - Stainless/Acetal

Stainless body with acetal nose


Click for combined categories: All Push Fit Spring Plungers


Plungers - Spring - Ring Handle - Locking - Steel

Plungers - Spring - Ring Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Tee Handle - Locking - Stainless

Plungers - Spring - Tee Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Tee Handle - Locking - Steel

Plungers - Spring - Tee Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Threaded - Stainless/Acetal

Plungers - Spring - Threaded - Stainless/Acetal

303 Stainless Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Plungers - Spring - Threaded - Steel and Plastic

Plungers - Spring - Threaded - Steel and Plastic

Plastic nose with steel body

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Plungers - Spring - Threaded - Steel - Hex Nose

Plungers - Spring - Threaded - Steel - Hex Nose

Steel body and steel hex nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Plungers - Spring - Threaded - Steel - Long Stroke

Plungers - Spring - Threaded - Steel - Long Stroke

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Plungers - Spring - Threaded - Steel - Threadlock

Plungers - Spring - Threaded - Steel - Threadlock

With Long-Lok thread locking compound to prevent loosening

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 3 Wave Type - Berryllium Copper

Washers - Spring - 3 Wave Type - Berryllium Copper

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - Spring Steel

Washers - Spring - 3 Wave Type - Spring Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Gas Springs

Hide Pictures

Go to Top  


Gas Springs - Adjustable - Push Type - Max  100N

Gas Springs - Adjustable - Push Type - Max 100N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 5mm. Available Force Range: 5N to 100N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 1300N

Gas Springs - Adjustable - Push Type - Max 1300N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 80N to 1300N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  180N

Gas Springs - Adjustable - Push Type - Max 180N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 10N to 180N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max 2600N

Gas Springs - Adjustable - Push Type - Max 2600N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 100N to 2600N (comes standard with max. force).

Click for combined categories: All Gas Springs


Gas Springs - Adjustable - Push Type - Max  700N

Gas Springs - Adjustable - Push Type - Max 700N

Piston Rod: Hard black ceramic finish. Body: Powder Coated. End Fittings: Zinc Plated Steel. Operating Temp. Range: -20oC to +80oC End Position Damping Length: Approx. 10mm. Available Force Range: 50N to 700N (comes standard with max. force).

Click for combined categories: All Gas Springs


Spring Reels

Hide Pictures

Go to Top  


Reels - Spring Powered - Base Mounted - Steel

Reels - Spring Powered - Base Mounted - Steel

Used in counterbalances, door closers, cable retractors, hose retreivers, tool head returns, cabinets and furniture.

Click for combined categories: All Reels


Springs Compression

Hide Pictures

Go to Top  


Springs - Compression - Long Lengths - Music Wire

Springs - Compression - Long Lengths - Music Wire

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Click for combined categories: All Compression Springs


Springs - Compression - Standard - Stainless Steel

Springs - Compression - Standard - Stainless Steel

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Click for combined categories: All Compression Springs

Related Information:
Zinc Plated Compression Springs


Plungers Spring

Hide Pictures

Go to Top  


Plungers - Spring - Acetal Handle - Locking - Stainless

Plungers - Spring - Acetal Handle - Locking - Stainless

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Acetal Handle - Non Locking - Stainless

Plungers - Spring - Acetal Handle - Non Locking - Stainless

White acetal plastic handle . 303 stainless steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Acetal Handle - Non Locking - Steel

Plungers - Spring - Acetal Handle - Non Locking - Steel

Black acetal plastic handle . Black oxide coated steel body and plunger.

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Hex Drive Handle - Locking - Steel

Plungers - Spring - Hex Drive Handle - Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Stainless

Plungers - Spring - Knurled Handle - Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Stainless/Acetal

Plungers - Spring - Knurled Handle - Locking - Stainless/Acetal

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Steel/Acetal

Plungers - Spring - Knurled Handle - Locking - Steel/Acetal

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Locking - Steel/Phenolic

Plungers - Spring - Knurled Handle - Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Non Locking - Stainless

Plungers - Spring - Knurled Handle - Non Locking - Stainless

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Knurled Handle - Non Locking - Steel

Plungers - Spring - Knurled Handle - Non Locking - Steel

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Stainless/Acetal

Plungers - Spring - L Handle - Locking - Stainless/Acetal

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Stainless/Phenolic

Plungers - Spring - L Handle - Locking - Stainless/Phenolic

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Steel/Acetal

Plungers - Spring - L Handle - Locking - Steel/Acetal

Steel body and acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - L Handle - Locking - Steel/Phenolic

Plungers - Spring - L Handle - Locking - Steel/Phenolic

Steel body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Pull Ring - Locking - Stainless/Acetal

Plungers - Spring - Pull Ring - Locking - Stainless/Acetal

Stainless body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers


Plungers - Spring - Pull Ring - Locking - Steel/Acetal

Plungers - Spring - Pull Ring - Locking - Steel/Acetal

Steel body with acetal nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.

Click for combined categories: All Threaded Spring Plungers

Click for combined categories: All Handled Spring Plungers



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.