Engineering And Hobby Rod - Small Parts And Bearings Categories


We are currently closed for stocktake and Easter. Online, e-mail and fax orders placed during this time will be processed on Tuesday 22nd April. Please have a Happy Easter.


FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

DR-11RS found in Books - Engineering
Main Description: Machinery Handbook Pocket Companion. Publisher: Industrial Press. Info: A condensed pocket companion for users of the Machinery Hand

Stock: 1


Matching Part

DR-16RS found in Books - Engineering
Main Description: Shop Reference. Publisher: -. Info: For students and apprentices.

Stock: 1


Matching Part

MachineryHB found in Books - Engineering
Main Description: MACHINERY HANDBOOK. Publisher: Industrial Press. Info: Industry fundamentals and standards.

Backorder



Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Acetal

Rod - Round - Acetal

Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.41 g/cm3 - Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa / Hardness 80 Rockwell M. Small diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - Aluminium

Rod - Round - Aluminium

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod


Rod - Round - Brass

Rod - Round - Brass

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod


Rod - Round - Bronze - LG2 (Standard)

Rod - Round - Bronze - LG2 (Standard)

Leaded Gunmetal Bronze. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Longer lengths available on special request. Composition (Approx.) : Copper 85%, Tin 5%, Zinc 5%, Lead 5%. AS1565-83600 / Hardness : 70-90 BHN. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod


Rod - Round - Carbon Fibre

Rod - Round - Carbon Fibre

High impact light weight carbon fibre for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Click for combined categories: All Plastic Rod


Rod - Round - Glass Fibre

Rod - Round - Glass Fibre

High impact light weight fibreglass for modelling.

Glass fibre rod is not smooth.

Click for combined categories: All Plastic Rod


Rod - Round - Nylon

Rod - Round - Nylon

High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - Polyester PETP

Rod - Round - Polyester PETP

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - PTFE

Rod - Round - PTFE

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Click for combined categories: All Plastic Rod


Rod - Round - Sintered Bronze

Rod - Round - Sintered Bronze

Sintered bronze is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Click for combined categories: All Metal Rod


Rod - Round - Stainless Steel

Rod - Round - Stainless Steel

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Click for combined categories: All Metal Rod


Rod - Round - Urethane

Rod - Round - Urethane

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Diameter +/- 2 percent.

Click for combined categories: All Plastic Rod


Engineering Sets

Hide Pictures

Go to Top  


Engineering Kits - Automat

Engineering Kits - Automat

See PDF file in FTP Directory for more information. Educational tool suitable for mechanical teaching institutions.

Automat is a Trademark of Designatronics.

Books

Hide Pictures

Go to Top  


Books - Engineering

Books - Engineering

Machinery handbook contains standards, materials and other general engineering information.

Engineers Black Book, Fasteners Black Book, Machinery Handbook, Shop Reference.

Click for combined categories: All Books


Hobby Shafting

Hide Pictures

Go to Top  


Shafting - Ground - Hobby - Steel

Shafting - Ground - Hobby - Steel

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Shaft Assortments


Hobby Gears

Hide Pictures

Go to Top  


Hobby Gears - Worm and Wheel  40 : 1 Plastic

Hobby Gears - Worm and Wheel 40 : 1 Plastic

Popular Hobby Set

1 start 40 tooth gear.

Hobby Gears - Spur - 48DP

Hobby Gears - Spur - 48DP

A small selection of popular 48DP Plastic/ Metal Pinion and Spur gears

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a 48DP spur gear, divide multiply the no of teeth by 0.52917.

Hobby Servo Motors

Hide Pictures

Go to Top  


Servo Motor - Hobby - General

Servo Motor - Hobby - General

For cars, planes, boats and helicopters. JR, Spektrum, Futaba and Hitec

Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.

Click for combined categories: All Hobby Servo Motors


Hobby Gears

Hide Pictures

Go to Top  


Hobby Gears - Spur - Module 0.4

Hobby Gears - Spur - Module 0.4

A small selection of popular Module 0.4 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.4 spur gear with 20 teeth has a pitch diameter of 8mm. A module 0.4 spur gear with 10 teeth has a pitch diameter of 4mm.

Hobby Gears - Spur - Module 0.5

Hobby Gears - Spur - Module 0.5

A small selection of popular Module 0.5 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.5 spur gear with 20 teeth has a pitch diameter of 10mm. A module 0.5 spur gear with 10 teeth has a pitch diameter of 5mm.

Gears - Crown Wheel - Module 0.5 - Hobby

Gears - Crown Wheel - Module 0.5 - Hobby

PCD = No. of Teeth x 0.500mm - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.

Click for combined categories: All Hobby Gears


Gears - Spur - Module 0.5 - Hobby - Economy

Gears - Spur - Module 0.5 - Hobby - Economy

PCD = No. of Teeth x 0.500mm. 20o Pressure Angle - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Spur Gears

Click for combined categories: All Hobby Gears


Spacers

Hide Pictures

Go to Top  


Spacers - Round - Hobby

Spacers - Round - Hobby

Inexpensive nylon spacers for hobby applications


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Non Metallic


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby - 12.1mm Diameter

Gearmotors - Basic - Hobby - 12.1mm Diameter

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.

Click for combined categories: All Basic Gearmotors


Leads and Connectors

Hide Pictures

Go to Top  


Leads - Hobby

Leads - Hobby

Adaptor leads for batteries, battery chargers, servos and receivers including Tamiya, Deans and Losi plugs.

Includes Deans and T Connectors.

Books

Hide Pictures

Go to Top  


Books - Hobby - General

Books - Hobby - General

Tips and tricks, maintenance and how-to guides.

Styrene modelling, biodiesel, Tamiya catalogue, RC tuning.

Click for combined categories: All Books


Batteries

Hide Pictures

Go to Top  


Batteries - Hobby - Lead Acid

Batteries - Hobby - Lead Acid

All types of Lead Acid Battery


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby Kits

Gearmotors - Basic - Hobby Kits

These gearmotor kits are of simple mainly plastic design. Great for making simple toys, hobbies or concept testing. Educational series.


Click for combined categories: All Basic Gearmotors


Books

Hide Pictures

Go to Top  


Books - Hobby - Mousetrap Vehicles

Books - Hobby - Mousetrap Vehicles

Tips and tricks and how-to guides for Mousetrap powered cars and boats

Activities guide and plans.

Click for combined categories: All Books


Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Ground - Silver Steel

Shafting - Ground - Silver Steel

Unhardened silversteel shafting for general purposes. Not suitable for precision bearings until machined to correct tolerances and hardened.

See also drill rod. Drill Rod.

Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Keyed

Shafting - Keyed

Keyways are cut full length of each bar.

Diameter Tolerance +0.00/-0.051. Keyway Depth Tolerance +0.41/-0.00. Keyway Width Tolerance +0.05/-0.00.

Click for combined categories: All Shafting


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium

Shafting - Aluminium

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40m. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

Click for combined categories: All Aluminium Shafting


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Precision - Chrome Plated

Shafting - Ground - Precision - Chrome Plated

Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Hardened and recommended for use with precision bearings. Ends are not plated.


Shafting - Ground - Precision - Chrome Vanadium Alloy

Shafting - Ground - Precision - Chrome Vanadium Alloy

Precision ground shafting. Ck53 / Cf53 Chrome Vanadium Alloy. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - High Carbon Steel

Shafting - Ground - Precision - High Carbon Steel

Precision ground shafting. AISI C1060. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 303 Grade

Shafting - Ground - Precision - Stainless 303 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 316 Grade

Shafting - Ground - Precision - Stainless 316 Grade

Precision ground shafting.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 416 Grade Hardened

Shafting - Ground - Precision - Stainless 416 Grade Hardened

Precision ground shafting. 416 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 420 Grade Hardened

Shafting - Ground - Precision - Stainless 420 Grade Hardened

Precision ground shafting. 420 grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 17-4PH Grade Hardened

Shafting - Ground - Precision - Stainless 17-4PH Grade Hardened

Precision ground shafting. 17-4PH grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting - Ground - Precision - Stainless 440C Grade Hardened

Shafting - Ground - Precision - Stainless 440C Grade Hardened

Precision ground shafting. 440C grade. Hardened and recommended for use with precision bearings.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium - Ceramic Coated

Shafting - Aluminium - Ceramic Coated

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Aluminium Shafting


Shafting Hollow

Hide Pictures

Go to Top  


Shafting - Pipe - AISI52100 Steel

Shafting - Pipe - AISI52100 Steel

AISI 52100 Steel Hardened to HRC 58-62. Straightness 0.0003 mm / mm. Ideal for design weight reduction. Note! ID of pipe shaft may be up to 1mm undersize. Other lengths may be available on request however a surcharge for special sizing will apply and extended delivery times can be expected (if available).

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium - Ceramic Coated - Tapped

Shafting - Aluminium - Ceramic Coated - Tapped

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Aluminium Shafting


Shafting General Purpose

Hide Pictures

Go to Top  


Shafting - Mild Steel

Shafting - Mild Steel

Great axles for low load and low precision applications like trolleys, carts and wheelbarrows.


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Pipe - Aluminium

Shafting - Pipe - Aluminium

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40m. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Ground - Cold Rolled Steel

Shafting - Ground - Cold Rolled Steel

Cold rolled steel with saw cut ends and smooth finish


Click for combined categories: All Shafting

Related Information:
Shaft Extenders

Bore Reducers


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Supported - Pre-Drilled - Aluminium

Shafting - Supported - Pre-Drilled - Aluminium

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40m. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

Click for combined categories: All Shafts


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafting - Pre Drilled and Tapped - High Carbon Steel

Shafting - Pre Drilled and Tapped - High Carbon Steel

For use with rail supports and open linear bearings

Straightness: 0.1 mm / mtr.

Click for combined categories: All Shafting


Shafting - Pre Drilled and Tapped - Stainless Steel Steel

Shafting - Pre Drilled and Tapped - Stainless Steel Steel

For use with rail supports and open linear bearings


Tee Joints

Hide Pictures

Go to Top  


Joints - Tee - Tubing and Rod

Joints - Tee - Tubing and Rod

Inexpensive nylon joiners for hobby tubing and rod


Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill Blanks

Rod - Drill Blanks

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.

Click for combined categories: All Drill Rod


Rod - Drill - General

Rod - Drill - General

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Chrome vanadium alloy with unfinished ends. Requires heat treating to harden. Small diameters may not be perfectly straight. Heat treating by air, water or oil. See also Silver Steel.

Click for combined categories: All Drill Rod

Related Information:
Silversteel


Square Shaft

Hide Pictures

Go to Top  


Shafting - Linear - Square

Shafting - Linear - Square


Click for combined categories: All Shafting


Shafting General Purpose

Hide Pictures

Go to Top  


Rod - Drill - A-2 Air Hardening

Rod - Drill - A-2 Air Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening. Maximum abrasion resistance. 65 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - O-1 Oil Hardening

Rod - Drill - O-1 Oil Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

For general toolroom use. Good non-deforming characteristics. Moderate resistance to abrasion. 90 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - S-7 Air Hardening

Rod - Drill - S-7 Air Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

Air hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. 95 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - W-1 Water Hardening

Rod - Drill - W-1 Water Hardening

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

High abrasion resistance and high toughness when hardened. 100 percent machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod - Drill - Oil Hardening - 480 Series

Rod - Drill - Oil Hardening - 480 Series

For punches dies and high strength machine parts. Unhardened - requires heat treatment.

General purpose tool steel with good wear resistance, toughness and machinability. Requires heat treating to harden. Small diameters may not be perfectly straight.

Click for combined categories: All Drill Rod


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Plastic - Male

Rod Ends - Plastic - Male

Thermoplastic Body / L280R Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends


Rod Ends - Plastic - Female

Rod Ends - Plastic - Female

Thermoplastic Body / L280R Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Brass

Threaded Rod - Allthread - Brass

UNC - UNF - METRIC brass.


Click for combined categories: All Threaded Rod


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - Stamped - Female

Rod Ends - Steel - Stamped - Female

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Plastic

Threaded Rod - Allthread - Plastic

UNC - UNF - METRIC - Nylon and PVC.

Light Weight. Non Corrosive. Vibration Resistant.

Click for combined categories: All Threaded Rod


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - PTFE Lined - Male

Rod Ends - Steel - PTFE Lined - Male

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Aluminium

Threaded Rod - Allthread - Aluminium

UNC and UNF light weight aluminium.


Click for combined categories: All Threaded Rod


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - Bronze Lined - Female

Rod Ends - Steel - Bronze Lined - Female

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Bronze Lined - Male

Rod Ends - Steel - Bronze Lined - Male

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Nylon Raceway - Male

Rod Ends - Steel - Nylon Raceway - Male

Also known as Heim Joints


Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - PTFE Lined - Female

Rod Ends - Steel - PTFE Lined - Female

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Steel - Plain

Threaded Rod - Allthread - Steel - Plain

UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile.


Click for combined categories: All Threaded Rod


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - Nylon Raceway - Female

Rod Ends - Steel - Nylon Raceway - Female

Also known as Heim Joints


Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Stainless Steel

Threaded Rod - Allthread - Stainless Steel

UNC - UNF - METRIC - 303, 304 and 316 grades.


Click for combined categories: All Threaded Rod


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Stainless Steel - PTFE Lined - Male

Rod Ends - Stainless Steel - PTFE Lined - Male

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Stainless Steel Male Rod Ends


Rod Ends - Steel - Heavy Duty - Ball - Female

Rod Ends - Steel - Heavy Duty - Ball - Female

With integral self aligning ball bearing. Also known as Heim Joints

With grease nipple. Housing: Tempered forged steel. Bearing Race: Case hardened. Thread: Rolled - Surface galvanised. Inner Ring: Ball bearing steel. Hardened, ground. Lubrication: Calcium Complex Soap Grease temperature range -20C to +120C.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Studded - Nylon Seat - Female

Rod Ends - Steel - Studded - Nylon Seat - Female

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Female Rod Ends with Stud


Rod Ends - Steel - Studded - Nylon Seat - Male

Rod Ends - Steel - Studded - Nylon Seat - Male

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Male Rod Ends with Stud


Rod Ends - Steel - Studded - PTFE Seat - Female

Rod Ends - Steel - Studded - PTFE Seat - Female

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Female Rod Ends with Stud


Rod Ends - Steel - Studded - PTFE Seat - Male

Rod Ends - Steel - Studded - PTFE Seat - Male

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.

Click for combined categories: All Male Rod Ends with Stud


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Steel - Zinc Plated

Threaded Rod - Allthread - Steel - Zinc Plated

UNC - UNF - METRIC - BSW


Click for combined categories: All Threaded Rod


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Stainless Steel - Bronze Lined - Female

Rod Ends - Stainless Steel - Bronze Lined - Female

Also known as Heim Joints

Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Stainless Steel - Nylon Raceway - Female

Rod Ends - Stainless Steel - Nylon Raceway - Female

Also known as Heim Joints


Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Stainless Steel - Nylon Raceway - Male

Rod Ends - Stainless Steel - Nylon Raceway - Male

Also known as Heim Joints


Click for combined categories: All Male Rod Ends

Click for combined categories: All Stainless Steel Male Rod Ends


Rod Ends - Stainless Steel - PTFE Lined - Female

Rod Ends - Stainless Steel - PTFE Lined - Female

Tight fit (Minimal ball clearance). Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Steel - Bronze Lined - High Clearance - Female

Rod Ends - Steel - Bronze Lined - High Clearance - Female

High clearance very free moving self lubricating. Also known as Heim Joints

100 Cr6 Bearing Steel on bronze bearing surface. Housings - Sizes 4 to 12 Low Carbon Steel, sizes 16-20 High Carbon Alloy Steel. Minus 30 Deg C to 150 Deg C Operating Temperature Range. Multiply Static Load by 0.5 for simple radial dynamic load or by 0.25 if load is varied. Maintenance free, wear resistant bearing surfaces, low constant rotational resistance.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Bronze Lined - High Clearance - Male

Rod Ends - Steel - Bronze Lined - High Clearance - Male

High clearance very free moving self lubricating. Also known as Heim Joints

100 Cr6 Bearing Steel on bronze bearing surface. Housings - Sizes 5 to 12 Low Carbon Steel, sizes 16-20 High Carbon Alloy Steel. Minus 30 Deg C to 150 Deg C Operating Temperature Range. Multiply Static Load by 0.5 for simple radial dynamic load or by 0.25 if load is varied. Maintenance free, wear resistant bearing surfaces, low constant rotational resistance.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Steel - Studded - Quick Disconnect - Female

Rod Ends - Steel - Studded - Quick Disconnect - Female

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.

Click for combined categories: All Female Rod Ends with Stud


Rod Ends - Steel - Studded - Swaged Construction - Female

Rod Ends - Steel - Studded - Swaged Construction - Female

Designed for heavy duty service, they come with dirt shield to provide protection against contaminants.

Unique assembly swages metal to retain the ball in cavity resulting in increased pull out and wear resistance. Ball studs are surface hardened. Made of low carbon steel, plated and dichromate treated.

Click for combined categories: All Female Rod Ends with Stud


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - With Shaft

Rail Supports - With Shaft

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings


Rail Supports - Without Shaft

Rail Supports - Without Shaft

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearing in Housing

Linear Bearings


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Shafts - Steel

Splined Shafts - Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Bar

Hide Pictures

Go to Top  


Square Bar - Brass

Square Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.

Click for combined categories: All Square Bar


Bar - I Beam - Brass

Bar - I Beam - Brass


Splined Shafts and Bushes

Hide Pictures

Go to Top  


Splined Shafts - Stainless Steel

Splined Shafts - Stainless Steel

Externally splined shafting. Bushes not included. Match with same size splined bushes.

Match bushes and shafts by Major Diameter. Steel on Steel is not meant for sliding applications. Steel on Bronze is OK for intermittent sliding under load.

Click for combined categories: All Splined Shafts

Related Information:
Combined Splined Bushes List


Bar

Hide Pictures

Go to Top  


Hexagonal Bar - Brass

Hexagonal Bar - Brass

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight.

Click for combined categories: All Hexagonal Bar


Square Bar - Urethane

Square Bar - Urethane

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.

Click for combined categories: All Square Bar


Shafting Precision Ground

Hide Pictures

Go to Top  


Shafts - Idler

Shafts - Idler

Ready made precision ground idler shafts.

Internal grease hole can be accessed by drilling if required. Use with your idler pulleys. Can be used with the idler tensioners listed on this site or use in your own design.

Bar

Hide Pictures

Go to Top  


Bar - H Section - Brass

Bar - H Section - Brass



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.