All Items: Drylin - Categories


Drylin Bearings and Systems

Hide Pictures

Go to Top  


Drylin Linear Assembly Parts - Carriage Only

Drylin Linear Assembly Parts - Carriage Only

Linear sliding motion. Plain and Locking Types. These carriages require a matching guide rail or matching rack and pinion. Match by size.

Drylin(R) T linear guides are maintenance free and run without additional lubrication. Consequently, they are also suitable for use in damp or dirty environments. Available with a manually operated clamp to achieve a force fit at any desired point along the travel path. The wing screw is used to clamp the slide in place of the guide. Matching components listed in separate category.

Click for combined categories: All Drylin


Drylin Linear Assembly Parts - Guide Rails Only

Drylin Linear Assembly Parts - Guide Rails Only

These rails require a matching carriage as listed in a separate category. Match by size.

Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Matching components listed in separate category.

Click for combined categories: All Drylin


Drylin Linear Assembly Parts - Pinion Assembly Only

Drylin Linear Assembly Parts - Pinion Assembly Only

These pinion assemblies require a matching carriage and rack as listed in separate categories. Match by size.

Pinion Assembly Body: Aluminium. Gear: Stainless steel. Bearings: Steel. Working Temperature Range: 0oC to +60oC. Designed to be attached to TW carriages using specific rack rail.

Click for combined categories: All Drylin


Drylin Linear Assembly Parts - Rack and Rail Only

Drylin Linear Assembly Parts - Rack and Rail Only

These rack and rails require a matching carriage and pinion assembly as listed in separate categories. Match by size.

Working Temperature Range: 0oC to +60oC. Available in 500mm lengths. Slide Rail: Extruded Aluminium Construction Material: Al Mg Si 0.5. Coating: Hard anodised, 50um Hardness: 500HV. Refer to Standard Rail for basic dimensions.

Click for combined categories: All Drylin


Drylin - Linear - Slides and Carriages - Size 17

Drylin - Linear - Slides and Carriages - Size 17

Linear sliding motion.

Guide Rail Weight: 150 g/m. Carriage Weight: 1.7g. Max Rail Length: 1960 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Click for combined categories: All Drylin


Drylin - Linear - Slides and Carriages - Size 27

Drylin - Linear - Slides and Carriages - Size 27

Linear sliding motion.

Guide Rail Weight: 290 g/m. Carriage Weight: 10.8 or 12.5g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Click for combined categories: All Drylin


Drylin - Linear - Slides and Carriages - Size 80

Drylin - Linear - Slides and Carriages - Size 80

Linear sliding motion.

Guide Rail Weight: 1140 g/m. Carriage Weight: 100g. Max Rail Length: 2000 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Click for combined categories: All Drylin


Drylin Sliding Bearings

Drylin Sliding Bearings

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J. Maximum Mean Surface Pressure: 25 N/mm2. Highest Wear Resistance at loads: Less than 2 N/mm2. Maximum Speed: 8 m/s (dry) Greater than 10 m/s (lubricated) 1.5 m/s (rotating dry). Working Temp. Range: -60oC to +100oC (increased wear when used in excess of 80oC).

Drylin Sliding Film

Drylin Sliding Film

Linear sliding motion. Use with Drylin Aluminium Shafts.

Sliding film Iglidur J.

Linear Slides

Hide Pictures

Go to Top  


Linear Slide - Drylin - Accessories

Linear Slide - Drylin - Accessories

Insensitive to dust and dirt.

Carriage blocks and half slide rail. Make your own custom sized assemblies. Replace blocks on carriage assemblies. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.

Click for combined categories: All Linear Slides

Related Information:
Carriage Assembly


Linear Slide - Drylin - Carriage Assembly

Linear Slide - Drylin - Carriage Assembly

Insensitive to dust and dirt. Match with Drylin Rail sold seperately.

Match size 1 assembly with size 1 rail or size 2 assembly with size 2 rail. Flat and wide for supporting high moments. Low friction value for dry running. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.

Click for combined categories: All Linear Slides

Related Information:
Drylin Accessories


Linear Slide - Drylin - Rail

Linear Slide - Drylin - Rail

Insensitive to dust and dirt. Match with Drylin Carriage Assembly sold seperately.

Match size 1 assembly with size 1 rail or size 2 assembly with size 2 rail. Flat and wide for supporting high moments. Low friction value for dry running. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.

Click for combined categories: All Linear Slides

Related Information:
Drylin Accessories


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium

Shafting - Aluminium

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting - Supported - Pre-Drilled - Aluminium

Shafting - Supported - Pre-Drilled - Aluminium

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting - Pipe - Aluminium

Shafting - Pipe - Aluminium

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Igubal - Sliding

Housings - Igubal - Sliding

Housing: Aluminium. Insert: Sliding film Iglidur(R) J. Tolerance for the Shaft: h7. Use with Drylin aluminium shafts.

Click for combined categories: All Housings with Integral Bearing


Leadscrew Actuators

Hide Pictures

Go to Top  


Actuator - Leadscrew - Low Profile

Actuator - Leadscrew - Low Profile

Lead = Travel per revolution of screw. Rail, Carriage Plate and End Blocks: Aluminium Carriage Blocks: Die cast Zinc. Leadscrew: Steel. Bearings: Self lubricating DryLin(R) Plastic. Max. Permissible Radial Load: 2,800N (Static), 2,000N (Dynamic). Max. Permissible Thrust Load: 700N (Static), 0,23 MPa x m/s (Dynamic Trapezoidal Leadscrew), 0.08 x m/s (Axial Bearing).

Click for combined categories: All Leadscrew Actuators



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155106 products in 3673 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.