Dc Motors - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for DC MOTOR
Matching Part

ADDCM280AD found in Motors - Vibrating
Description: Vibrating Motor. Information: 24.0mm Diameter x 30.5mm Long. Information: Operating Voltage 3.0-12V Nominal 6V.

Stock: 5


Matching Part

ADDCM4540AD found in Motors - DC 22.4X38.0 mm
Body Diameter: 22.4. Overall Length: 38.0. Operating Voltage: 3.0-9.0.

Stock: 10


Matching Part

TG112-10ADC found in Gearmotors - DC - Size 112
Ratio: 10 to 1. Output Torque at 1650 Rpm Inpu: 5.00. L: 175.

Backorder


Matching Part

TG112-12ADC found in Gearmotors - DC - Size 112
Ratio: 12 to 1. Output Torque at 1650 Rpm Inpu: 5.00. L: 175.

Backorder


Matching Part

TG112-16ADC found in Gearmotors - DC - Size 112
Ratio: 16 to 1. Output Torque at 1650 Rpm Inpu: 4.50. L: 175.

Backorder


Matching Part

TG112-2ADC found in Gearmotors - DC - Size 112
Ratio: 2 to 1. Output Torque at 1650 Rpm Inpu: 1.14. L: 175.

Backorder


Matching Part

TG112-4ADC found in Gearmotors - DC - Size 112
Ratio: 4 to 1. Output Torque at 1650 Rpm Inpu: 2.28. L: 175.

Backorder


Matching Part

TG112-5ADC found in Gearmotors - DC - Size 112
Ratio: 5 to 1. Output Torque at 1650 Rpm Inpu: 2.85. L: 175.

Backorder


Matching Part

TG112-6ADC found in Gearmotors - DC - Size 112
Ratio: 6 to 1. Output Torque at 1650 Rpm Inpu: 3.42. L: 175.

Backorder


Matching Part

TG112-8ADC found in Gearmotors - DC - Size 112
Ratio: 8 to 1. Output Torque at 1650 Rpm Inpu: 4.56. L: 175.

Backorder



Motors DC

Hide Pictures

Go to Top  


Motors - DC 12.0X30.0 mm

Motors - DC 12.0X30.0 mm

6.0V - 22800 RPM


Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 16.6X32.0 mm

Motors - DC 16.6X32.0 mm

M-500T Series 1.5 to 9 VDC - 1430 to 2230 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 18.9X18.0X9.5 mm

Motors - DC 18.9X18.0X9.5 mm

M-020 Series - 1 to 3 VDC - 3700 to 11000 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft. Weight Approx 9.5 grams.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 20.0X25.0 mm

Motors - DC 20.0X25.0 mm

1.5 to 4.5 VDC - 12,000 RPM unloaded at 3 volts


Click for combined categories: All DC Motors


Motors - DC 22.4X38.0 mm

Motors - DC 22.4X38.0 mm


Click for combined categories: All DC Motors


Motors - DC 23.6X25.0 mm

Motors - DC 23.6X25.0 mm

1.5 to 4.5 VDC - 12,500 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 23.8X30.6 mm

Motors - DC 23.8X30.6 mm

12 VDC - 12,300 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 24.3X12.35 mm

Motors - DC 24.3X12.35 mm

6.0 VDC - 4,900 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 25.0x20.1X15.1 mm

Motors - DC 25.0x20.1X15.1 mm

M-13 Series - 1.5 to 24 VDC - 4500 to 13760 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 25.0X21.0 mm

Motors - DC 25.0X21.0 mm

M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 26.9X23.8 mm

Motors - DC 26.9X23.8 mm

M-26 Series 1.5 to 24 VDC - 2500 to 15100 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 26.9X24.2X18.3 mm

Motors - DC 26.9X24.2X18.3 mm

MF-26 Series - 1.5 to 24 VDC - 3600 to 15900 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 30.5X24.2 mm

Motors - DC 30.5X24.2 mm

M-28 Series 1.5 to 24 VDC - 2830 to 14250 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 30.5X24.2X18.3 mm

Motors - DC 30.5X24.2X18.3 mm

MF-28 Series - 1.5 to 24 VDC - 4470 to 13430 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 36.0X71.0 mm

Motors - DC 36.0X71.0 mm

High power, high speed 11,800 RPM unloaded at 12 volts


Click for combined categories: All DC Motors


Motors - DC 42.0X85.0 mm

Motors - DC 42.0X85.0 mm

High power, high speed 9,700 RPM unloaded at 12 volts


Click for combined categories: All DC Motors


Motors - DC  6mm Diameter

Motors - DC 6mm Diameter

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Click for combined categories: All DC Motors


Motors - DC 8.0X10.0 mm

Motors - DC 8.0X10.0 mm

3.5V - 20500 RPM


Click for combined categories: All DC Motors

Related Information:
Batteries


Gearmotors DC

Hide Pictures

Go to Top  


Gearmotors - DC - Size  25 Low Cost

Gearmotors - DC - Size 25 Low Cost

25mm Gearhead Body Diameter. 24.4mm Motor Body Diameter. Low cost. Reversible

D Shaped 4x8mm Output Shaft.

Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  27 Low Cost

Gearmotors - DC - Size 27 Low Cost

27mm Gearhead Body Diameter. Low cost. 36 RPM Output Speed. One model only. Reversible. 24mm motor body diameter.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Low Voltage

Gearmotors - DC - Low Voltage

Reversible - Low Voltage - Self Starting.

Reversible. Low Voltage. Self Starting. Housing : Plastic / Shaft : Steel.

Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  12

Gearmotors - DC - Size 12

12mm Gearhead Body Diameter.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  20 Low Cost

Gearmotors - DC - Size 20 Low Cost

20mm Gearhead Body Diameter. Low cost. 70 RPM Output Speed. One model only. Reversible.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  37/350 Low Cost

Gearmotors - DC - Size 37/350 Low Cost

37mm Gearhead Body Diameter. Low cost. 160 RPM Output Speed. One model only. Reversible.


Click for combined categories: All DC Gearmotors


Gearmotors DC Permanent Magnet

Hide Pictures

Go to Top  


Gearmotors - DC PM - Size 70x114

Gearmotors - DC PM - Size 70x114

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Motors Hybrid Stepper

Hide Pictures

Go to Top  


Motors - Stepper - Hybrid - Nema Size 11

Motors - Stepper - Hybrid - Nema Size 11

Mounting hole centres 23.10 mm (+/- 0.2 mm) - Body Width 28.00 mm.

Refer PDF Link at bottm of internet page for sizes and wiring information. Hybrid Stepper Motors include a permanent magnet in the rotor.

Click for combined categories: All Stepper Motors


Motors - Stepper - Hybrid - Nema Size 14

Motors - Stepper - Hybrid - Nema Size 14

Mounting hole centres 26.00 mm - Body Width 35.00 mm.

Refer PDF Link at bottm of internet page for sizes and wiring information. Hybrid Stepper Motors include a permanent magnet in the rotor.

Click for combined categories: All Stepper Motors


Motors - Stepper - Hybrid - Nema Size 17

Motors - Stepper - Hybrid - Nema Size 17

Mounting hole centres 31.00 mm - Body Width 42.00 mm.

Refer PDF Link at bottm of internet page for sizes and wiring information. Hybrid Stepper Motors include a permanent magnet in the rotor.

Click for combined categories: All Stepper Motors


Motors - Stepper - Hybrid - Nema Size 23

Motors - Stepper - Hybrid - Nema Size 23

Mounting hole centres 47.00 mm - Body Width 56.40 mm.

Refer PDF Link at bottm of internet page for sizes and wiring information. Hybrid Stepper Motors include a permanent magnet in the rotor.

Click for combined categories: All Stepper Motors


Motors - Stepper - Hybrid - Nema Size 34

Motors - Stepper - Hybrid - Nema Size 34

Mounting hole centres 69.60 mm - Body Width 85.85 mm.

Refer PDF Link at bottm of internet page for sizes and wiring information. Hybrid Stepper Motors include a permanent magnet in the rotor.

Click for combined categories: All Stepper Motors


Motors - Stepper - Hybrid - Nema Size 42

Motors - Stepper - Hybrid - Nema Size 42

Mounting hole centres 88.90 mm - Flange Width 106.70 mm.

Refer PDF Link at bottm of internet page for sizes and wiring information. Hybrid Stepper Motors include a permanent magnet in the rotor.

Click for combined categories: All Stepper Motors


Motors Stepper

Hide Pictures

Go to Top  


Motors - Stepper - Nema Size 23

Motors - Stepper - Nema Size 23

NEMA SIZE 23 - 2 PHASE STEPPER MOTOR.


Click for combined categories: All Stepper Motors


Motors - Stepper - Nema Size 34

Motors - Stepper - Nema Size 34

NEMA SIZE 34 - 2 PHASE STEPPER MOTOR.


Click for combined categories: All Stepper Motors


Motors Vibrating

Hide Pictures

Go to Top  


Motors - Vibrating

Motors - Vibrating


Click for combined categories: All Vibrating Motors


Motors - Vibrating - Pager

Motors - Vibrating - Pager

Includes vibrating disc motor


Click for combined categories: All Vibrating Motors


Hobby Servo Motors

Hide Pictures

Go to Top  


Servo Motor - Brackets

Servo Motor - Brackets

Brackets to suit servo motors for robotic applications


Click for combined categories: All Hobby Servo Motors


Servo Motor - Hobby - General

Servo Motor - Hobby - General

For cars, planes, boats and helicopters. JR, Spektrum, Futaba and Hitec

Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.

Click for combined categories: All Hobby Servo Motors


Robotic Servo Motors

Hide Pictures

Go to Top  


Servo Motor - Hobbies Robotics

Servo Motor - Hobbies Robotics

Hitec and more

Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.

Click for combined categories: All Hobby Servo Motors


Spring Motors

Hide Pictures

Go to Top  


Spring Motor Assemblies - Open - RINO

Spring Motor Assemblies - Open - RINO

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.

Click for combined categories: All Spring Motors


Spring Motor Assemblies - SDP

Spring Motor Assemblies - SDP

Base Mounted.

Base Mounted. Springs : 301 Stainless Steel.

Click for combined categories: All Spring Motors


Spring Motors - RINO

Spring Motors - RINO

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Click for combined categories: All Spring Motors


Spring Motors - SDP

Spring Motors - SDP

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Click for combined categories: All Spring Motors


Spa Jet Motor Bearings

Hide Pictures

Go to Top  


Spa Jet Motor Multiple Parts

Spa Jet Motor Multiple Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Dental Handpiece Parts

Hide Pictures

Go to Top  


Micromat-Athlet Type H240B Motor Muss Parts

Micromat-Athlet Type H240B Motor Muss Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Power Adaptors

Hide Pictures

Go to Top  


Adaptors - Power - AC to DC - Multi Plug

Adaptors - Power - AC to DC - Multi Plug

SAA Approved Australian Adaptors for AC to DC. Supplied with assorted plugs.


Click for combined categories: All Power Adaptors


Brushless Motor Bearings

Hide Pictures

Go to Top  


Park 480 E-Flite Parts

Park 480 E-Flite Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Clutches

Hide Pictures

Go to Top  


Clutches - Shaft Mounted

Clutches - Shaft Mounted

24 V DC - Zero Backlash Armature - For parallel loads.

This basic information is designed to assist you to make a decision on which clutch to use. Full dimensions available on request.

Power Supplies

Hide Pictures

Go to Top  


Power Supplies

Power Supplies

24 V DC.

Standard : 24V DC Output, 110V AC input. Available on special order : 12V DC Output, 220/230V AC input.

Bases

Hide Pictures

Go to Top  


Kits - Robotic Bases

Kits - Robotic Bases

Robotic bases include chassis, wheels, motors, gearboxes and hardware. Build your own robot.


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby - 12.1mm Diameter

Gearmotors - Basic - Hobby - 12.1mm Diameter

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.

Click for combined categories: All Basic Gearmotors


Brakes

Hide Pictures

Go to Top  


Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Backlash (Enaged) Friction Types : 5 Min Max. Backlash (Enaged) Crown Tooth Types : 10 Min Max.

Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Backlash (Enaged) : 5 Min Max. Power Consumption at 24 V DC : 3.7 watts.

Bearings Hydrodynamic

Hide Pictures

Go to Top  


Bearings - Hydrodynamic Pressure

Bearings - Hydrodynamic Pressure

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Robotic Wheels

Hide Pictures

Go to Top  


Wheels - Robotic - Motorised

Wheels - Robotic - Motorised

Motorised wheels for robotic and other applications

See also tracks for robotic applications.

Click for combined categories: All Wheels


Brakes

Hide Pictures

Go to Top  


Brakes - Magnetic - Particle

Brakes - Magnetic - Particle

Zero Backlash - Low Inertia - No Friction Surface.

24 V DC. Shaft becomes coupled to housing with electrical excitation. Torque is proportional to the DC input current.

Clutches

Hide Pictures

Go to Top  


Clutch Brakes - Magnetic - Bu-Ord Size 18

Clutch Brakes - Magnetic - Bu-Ord Size 18

Breakaway Torque (Energised) at 24-28 V DC : 14.4g.cm (0.20 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 2.2g.cm (0.03 oz.in). Shafts A & B coupled when energised, B shaft braked when de-energised. Inertia (Energised) at 24-28 VDC : 5.11g.cm sq (0.071 oz.in sq). Inertia (Energised) at 24-28 VDC : 7.56g.cm sq (0.105 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Clutches - Magnetic - Bu-Ord Size 11 - Reverse Acting

Clutches - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 18g.cm (0.25 oz.in). Breakaway Torque (De-energised) at 24-28 V DC : 7.2g.cm (0.10 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.4g.cm sq (0.041 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.0g.cm sq (0.028 oz.in sq).

Click for combined categories: All Magnetic Clutches


Clutch Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Clutch Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 18g.cm (0.25 oz.in). Breakaway Torque (De-energised) at 24-28 V DC : 7.2g.cm (0.10 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.4g.cm sq (0.041 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.1g.cm sq (0.028 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Clutch Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Clutch Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 14.4g.cm (0.2 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.27g.cm sq (0.101 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.11g.cm sq (0.071 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Dental Handpiece Parts

Hide Pictures

Go to Top  


Airmotor 13000 RPM W.H. Parts

Airmotor 13000 RPM W.H. Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Micromotor Aquilon 830 - 850 Bien Air Parts

Micromotor Aquilon 830 - 850 Bien Air Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Micromotor Isolite 100 and 300 Bien Air Parts

Micromotor Isolite 100 and 300 Bien Air Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts

Micromotor MC2 20-40E - 20GTAV-40GTAV - 20GT-40GT Bien Air Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Micromotor MC3LK Bien Air Parts

Micromotor MC3LK Bien Air Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Micromotor Morita Parts

Micromotor Morita Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Gearmotors AC

Hide Pictures

Go to Top  


Gearmotors - A.C. Single Phase - Size 60

Gearmotors - A.C. Single Phase - Size 60

Max Capacitance - Induction Type - 50 Hz 1.0uf / 60 Hz 0.8 uF. Max Capacitance - Hysteresis Type - 0.8uf. Unit Weight Approx 0.8 KG. Machined Aluminium Housing - Steel Shaft. Steel / Phenolic Gears - Bronze Bearings.

Click for combined categories: All Right Angle Gearheads


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby Kits

Gearmotors - Basic - Hobby Kits

These gearmotor kits are of simple mainly plastic design. Great for making simple toys, hobbies or concept testing. Educational series.


Click for combined categories: All Basic Gearmotors


Gearmotors Open

Hide Pictures

Go to Top  


Gearmotors - Open Gear

Gearmotors - Open Gear

Perfect for applications where inspection of the gears is important, educational purposes or for visual effects.


Click for combined categories: All DC Permanent Magnet Gearmotors


Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - Thomson Saginaw

Screws - Ball - Thomson Saginaw

Offer 90% efficiency converting rotary to linear motion with low coefficient of friction. Match all components within the Thomson Saginaw range only.

When replacing screws, hydraulics or pneumatics, they allow the use of smaller, less expensive drive motors and reduce the need for auxiliary equipment. Offer dependable accuracy and repeatability, Made off high quality alloy steel, hardened to Rockwell 56-60C.

Click for combined categories: All Ball Screws


Turntables

Hide Pictures

Go to Top  


Display - Turntables and Signs

Display - Turntables and Signs

Very light weight motorised lazy susan with reflective paper cover.


Gearmotors

Hide Pictures

Go to Top  


Solarbotics Gearmotors

Solarbotics Gearmotors

Hobby gearmotors for all types of applications


Click for combined categories: All Solarbotics


Couplings Other

Hide Pictures

Go to Top  


Couplings - Vibration Absorption

Couplings - Vibration Absorption

For servo and stepper motors. Backlash free. Cap screw fixing.

Aluminium A2017 Hub. HNBR Anti-Vibration Rubber Insert. Black Oxide Coated Cap Screw SCM435 Steel. Minus 20 Deg C to 80 Deg C Operating Temperature. High torque. High response. Zero backlash. Electrical insulation.

Linear Slides

Hide Pictures

Go to Top  


Posi Drive Stage - Ball Slide

Posi Drive Stage - Ball Slide

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

Click for combined categories: All Posi-Drive Stages


Posi Drive Stage - Crossed Roller

Posi Drive Stage - Crossed Roller

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

Click for combined categories: All Posi-Drive Stages


Clutches

Hide Pictures

Go to Top  


Clutches - Magnetic Particle 24VDC

Clutches - Magnetic Particle 24VDC

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Click for combined categories: All Magnetic Clutches


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline - Planetary - Size  17 - Precision

Gearheads - Inline - Planetary - Size 17 - Precision

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types


Brakes

Hide Pictures

Go to Top  


Sensor - Ultrasonic - For Brakes

Sensor - Ultrasonic - For Brakes

For maintaining constant tension when using a brake for producing unwind tension.

Also used when using a clutch for rewind tension. When target is within range the LED Status Indicator glows continuously. Uses Power Supply S90MPS-24 (See category - Power Supplies). Sensor measures diameter of the roll and sends a 0-10V DC signal to power supply. Torque is automatically varied as roll size changes to keep constant tension.

Clutches

Hide Pictures

Go to Top  


Clutches - Magnetic - Bu-Ord Size 18 - Triplex

Clutches - Magnetic - Bu-Ord Size 18 - Triplex

Breakaway Torque (Energised) at 24-28 VDC : 14.4g.cm (0.20 oz.in). Breakaway Torque (De-Energised) at 24-28 VDC : 4.3g.cm (0.06 oz.in). Shafts A & B coupled when energised (terminals 1 and 2). Shafts A & C coupled when energised (terminals 3 and 4). Inertia (Energised) at 24-28 VDC : 19.2g.cm sq (0.108 oz.in sq) either coil, 25.86g.cm sq (0.145 oz.in sq) both coils.

Click for combined categories: All Magnetic Clutches


Steam Engine Parts

Hide Pictures

Go to Top  


D106 Wilesco Parts

D106 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D10 Wilesco Parts

D10 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D12 Wilesco Parts

D12 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D141 Wilesco Parts

D141 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D14 Wilesco Parts

D14 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D15 Wilesco Parts

D15 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D161 Wilesco Parts

D161 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D165 Wilesco Parts

D165 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D16 Wilesco Parts

D16 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D18 Wilesco Parts

D18 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D20 Wilesco Parts

D20 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D21 Wilesco Parts

D21 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D22 Wilesco Parts

D22 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D24 Wilesco Parts

D24 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

D305 Wilesco Parts

D305 Wilesco Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155213 products in 3609 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.