Dc Max Series Motors - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

1.61.065.403 found in Gearmotors - DC PM - Size 29
Voltage: 6V (8 max). Rated Torque: 45. Rated Speed: 136.

Backorder


Matching Part

1.61.065.404 found in Gearmotors - DC PM - Size 29
Voltage: 6V (8 max). Rated Torque: 90. Rated Speed: 64.

Backorder


Matching Part

1.61.065.405 found in Gearmotors - DC PM - Size 29
Voltage: 6V (8 max). Rated Torque: 150. Rated Speed: 34.

Backorder


Matching Part

1.61.065.406 found in Gearmotors - DC PM - Size 29
Voltage: 6V (8 max). Rated Torque: 200. Rated Speed: 18.

Backorder


Matching Part

1.61.065.407 found in Gearmotors - DC PM - Size 29
Voltage: 6V (8 max). Rated Torque: 200. Rated Speed: 9.5.

Backorder


Matching Part

1.61.065.408 found in Gearmotors - DC PM - Size 29
Voltage: 6V (8 max). Rated Torque: 300. Rated Speed: 4.65.

Backorder


Matching Part

1.61.065.423 found in Gearmotors - DC PM - Size 29
Voltage: 12V (16 max). Rated Torque: 45. Rated Speed: 136.

Backorder


Matching Part

1.61.065.424 found in Gearmotors - DC PM - Size 29
Voltage: 12V (16 max). Rated Torque: 90. Rated Speed: 64.

Backorder


Matching Part

1.61.065.425 found in Gearmotors - DC PM - Size 29
Voltage: 12V (16 max). Rated Torque: 150. Rated Speed: 34.

Backorder


Matching Part

1.61.065.426 found in Gearmotors - DC PM - Size 29
Voltage: 12V (16 max). Rated Torque: 200. Rated Speed: 18.

Backorder



Motors DC MAX Series

Hide Pictures

Go to Top  


Motors - DC - MAX 13

Motors - DC - MAX 13

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 21g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 16

Motors - DC - MAX 16

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 21g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 22

Motors - DC - MAX 22

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 54g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 32

Motors - DC - MAX 32

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 213g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 40

Motors - DC - MAX 40

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 187g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Gearheads MAX

Hide Pictures

Go to Top  


Gearheads - MAX 16

Gearheads - MAX 16

Use with Motors - DC - Ondrives - Max series.

16mm planetary steel gearhead supplied with fitting kit to suit Size 16 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 2 Stage = 15N, 5 Stage = 20N. Operating Temperature Range: -15oC to +65oC, Mass: 23-35g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 22

Gearheads - MAX 22

Use with Motors - DC - Ondrives - Max series.

22mm planetary steel gearhead supplied with fitting kit to suit Size 22 motors, sleeve bearing output. Maximum Axial Load: 100N. Maximum Radial Load at 10mm from Flange: 70N. Operating Temperature Range: -15oC to +80oC, Mass: 55-94g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 32

Gearheads - MAX 32

Use with Motors - DC - Ondrives - Max series.

32mm planetary steel gearhead supplied with fitting kit to suit Size 32 motors, sleeve bearing output. Maximum Axial Load: 120N. Maximum Radial Load at 12mm from Flange: 140N. Operating Temperature Range: -15oC to +80oC, Mass: 118-226g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 40

Gearheads - MAX 40

Use with Motors - DC - Ondrives - Max series.

38mm spur steel gearhead supplied with fitting kit to suit Size 40 motors, sleeve bearing output. Maximum Axial Load: 30N. Maximum Radial Load at 5mm from Bearing: 50N. Operating Temperature Range: -5oC to +65oC, Mass: 60-75g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Motors DC

Hide Pictures

Go to Top  


Motors - DC 16.6X32.0 mm

Motors - DC 16.6X32.0 mm

M-500T Series 1.5 to 9 VDC - 1430 to 2230 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 25.0X21.0 mm

Motors - DC 25.0X21.0 mm

M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 26.9X23.8 mm

Motors - DC 26.9X23.8 mm

M-26 Series 1.5 to 24 VDC - 2500 to 15100 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 30.5X24.2 mm

Motors - DC 30.5X24.2 mm

M-28 Series 1.5 to 24 VDC - 2830 to 14250 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 18.9X18.0X9.5 mm

Motors - DC 18.9X18.0X9.5 mm

M-020 Series - 1 to 3 VDC - 3700 to 11000 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft. Weight Approx 9.5 grams.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 25.0x20.1X15.1 mm

Motors - DC 25.0x20.1X15.1 mm

M-13 Series - 1.5 to 24 VDC - 4500 to 13760 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 26.9X24.2X18.3 mm

Motors - DC 26.9X24.2X18.3 mm

MF-26 Series - 1.5 to 24 VDC - 3600 to 15900 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 30.5X24.2X18.3 mm

Motors - DC 30.5X24.2X18.3 mm

MF-28 Series - 1.5 to 24 VDC - 4470 to 13430 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Hobby Servo Motors

Hide Pictures

Go to Top  


Servo Motor - Brackets

Servo Motor - Brackets

Brackets to suit servo motors for robotic applications


Click for combined categories: All Hobby Servo Motors


Motors DC

Hide Pictures

Go to Top  


Motors - DC  6mm Diameter

Motors - DC 6mm Diameter

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Click for combined categories: All DC Motors


Motors Vibrating

Hide Pictures

Go to Top  


Motors - Vibrating - Pager

Motors - Vibrating - Pager

Includes vibrating disc motor


Click for combined categories: All Vibrating Motors


Motors Stepper

Hide Pictures

Go to Top  


Motors - Stepper - Nema Size 23

Motors - Stepper - Nema Size 23

NEMA SIZE 23 - 2 PHASE STEPPER MOTOR.


Click for combined categories: All Stepper Motors


Motors - Stepper - Nema Size 34

Motors - Stepper - Nema Size 34

NEMA SIZE 34 - 2 PHASE STEPPER MOTOR.


Click for combined categories: All Stepper Motors


Motors Vibrating

Hide Pictures

Go to Top  


Motors - Vibrating

Motors - Vibrating


Click for combined categories: All Vibrating Motors


Spring Motors

Hide Pictures

Go to Top  


Spring Motors - SDP

Spring Motors - SDP

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Click for combined categories: All Spring Motors


Spring Motors - RINO

Spring Motors - RINO

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.

Click for combined categories: All Spring Motors


Motors DC

Hide Pictures

Go to Top  


Motors - DC 8.0X10.0 mm

Motors - DC 8.0X10.0 mm

3.5V - 20500 RPM


Click for combined categories: All DC Motors

Related Information:
Batteries


Gears Imperial Worms

Hide Pictures

Go to Top  


Worms - 24 Pitch (Series 1) - Metallic

Worms - 24 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 1) - Plastic

Worms - 24 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 2) - Metallic

Worms - 24 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 24 Pitch (Series 3) - Metallic

Worms - 24 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 1) - Metallic

Worms - 32 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 1) - Plastic

Worms - 32 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 2) - Metallic

Worms - 32 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 2) - Plastic

Worms - 32 Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 32 Pitch (Series 3) - Metallic

Worms - 32 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 15.95o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 1) - Metallic

Worms - 48 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 1) - Plastic

Worms - 48 Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 2) - Metallic

Worms - 48 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 3) - Metallic

Worms - 48 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.7o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 3) - Plastic

Worms - 48 Pitch (Series 3) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 4) - Metallic

Worms - 48 Pitch (Series 4) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 5) - Metallic

Worms - 48 Pitch (Series 5) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 48 Pitch (Series 6) - Metallic

Worms - 48 Pitch (Series 6) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 64 Pitch (Series 1) - Metallic

Worms - 64 Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 64 Pitch (Series 2) - Metallic

Worms - 64 Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - 64 Pitch (Series 3) - Metallic

Worms - 64 Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 7.12o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - Nook Series - Flanges

Screws - Ball - Nook Series - Flanges

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

Carburised steel with ball tracks heated to RC 58-60. Protective black oxide finish.

Motors DC

Hide Pictures

Go to Top  


Motors - DC 12.0X30.0 mm

Motors - DC 12.0X30.0 mm

6.0V - 22800 RPM


Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 20.0X25.0 mm

Motors - DC 20.0X25.0 mm

1.5 to 4.5 VDC - 12,000 RPM unloaded at 3 volts


Click for combined categories: All DC Motors


Motors - DC 22.4X38.0 mm

Motors - DC 22.4X38.0 mm


Click for combined categories: All DC Motors


Motors - DC 23.6X25.0 mm

Motors - DC 23.6X25.0 mm

1.5 to 4.5 VDC - 12,500 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 23.8X30.6 mm

Motors - DC 23.8X30.6 mm

12 VDC - 12,300 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 24.3X12.35 mm

Motors - DC 24.3X12.35 mm

6.0 VDC - 4,900 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 27.6X51.0 mm

Motors - DC 27.6X51.0 mm

Compact, high torque and reliable 16,200 RPM unloaded at 6 volts


Click for combined categories: All DC Motors


Motors - DC 36.0X71.0 mm

Motors - DC 36.0X71.0 mm

High power, high speed 11,800 RPM unloaded at 12 volts


Click for combined categories: All DC Motors


Motors - DC 42.0X85.0 mm

Motors - DC 42.0X85.0 mm

High power, high speed 9,700 RPM unloaded at 12 volts


Click for combined categories: All DC Motors


Ball Screws

Hide Pictures

Go to Top  


Screws - Ball - Nook Series - Right Hand

Screws - Ball - Nook Series - Right Hand

Match all components within the Nook Series range only. Match nuts, flanges and screws based on ball circle diameter.

High quality alloy steel, induction hardened to RC 56-60. Protective black oxide finish. Lead accurate by at least 0.00083mm per mm.

Gears Imperial Worms

Hide Pictures

Go to Top  


Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.77o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 24 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 9.47o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 24 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 18.43o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worm Gears - 32 Diametrical Pitch (Series 2) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 32 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 15.95o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.35o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 1) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 4.08o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.7o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worm Gears - 48 Diametrical Pitch (Series 3) - Plastic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 7.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 4) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 8.13o Lead Angle - 2 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 5) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worm Gears - 48 Diametrical Pitch (Series 6) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

25o Pressure Angle - 14.2o Lead Angle - 4 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 1) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 1.78o Lead Angle - 1 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 2) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 3.58o Lead Angle - 2 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worm Gears - 64 Diametrical Pitch (Series 3) - Metallic

Worms and Gears must be chosen from the same pitch and series to match.

14.5o Pressure Angle - 7.12o Lead Angle - 4 Lead. Includes anti-backlash series. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Gears Metric Worms

Hide Pictures

Go to Top  


Worm Gears - Module 3 (Series 1) - Metallic - Left Hand

Worm Gears - Module 3 (Series 1) - Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 3 (Series 1) - Metallic - Right Hand

Worm Gears - Module 3 (Series 1) - Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 3 (Series 1) - Metallic - Left Hand

Worms - Module 3 (Series 1) - Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.92o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Hobby Servo Motors

Hide Pictures

Go to Top  


Servo Motor - Hobby - General

Servo Motor - Hobby - General

For cars, planes, boats and helicopters. JR, Spektrum, Futaba and Hitec

Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.

Click for combined categories: All Hobby Servo Motors


Spring Motors

Hide Pictures

Go to Top  


Spring Motor Assemblies - SDP

Spring Motor Assemblies - SDP

Base Mounted.

Base Mounted. Springs : 301 Stainless Steel.

Click for combined categories: All Spring Motors


Gears Metric Worms

Hide Pictures

Go to Top  


Worm Gears - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Worm Gears - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Match with metallic worms Module 0.80 Series 2.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worm Gears - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worm Gears - Module 2.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.87o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worm Gears - Module 2 (Series 3) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.70o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worm Gears - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worm Gears - Module 2 (Series 4) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worm Gears

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Worms - Module 0.8 (Series 2) - Plastic Gear and Metallic Worm

Match with metallic worms Module 0.80 Series 2.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worms - Module 1.5 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worms - Module 1.5 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.43o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worms - Module 1 (Series 1) - Plastic and Metallic - Left Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worms - Module 1 (Series 1) - Plastic and Metallic - Right Hand

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 3.58o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website


Worms - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worms - Module 1 (Series 2) - Plastic Gear and Metallic Worm

Worms and Gears must be chosen from the same pitch and series to match.

20o Pressure Angle - 4.40o Lead Angle - 1 Lead. A single start worm and gear will provide a ratio equivalent to the number of teeth on the gear. A double start worm and gear will provide a ratio of half the number of teeth on the gear.

Click for combined categories: All Worms

Related Information:
For simple ready selected sets of worms and gears please see the HES website



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.