All Items: Dc Gearmotors - Categories


Gearmotors DC

Hide Pictures

Go to Top  


Gearmotors - DC - Low Voltage

Gearmotors - DC - Low Voltage

Reversible - Low Voltage - Self Starting.

Reversible. Low Voltage. Self Starting. Housing : Plastic / Shaft : Steel.

Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size 112

Gearmotors - DC - Size 112

112mm Gearhead Body - Low Backlash.

Weight: 3.50kg. Check motor data and gearbox chart for max. torque figures. Testing in your applications is necessary. You will need to assess duty, cycles and confirm gearbox suitability with your own calculations. Torque figures are to be used for guidance only. DUN80x80-24 DC Motor Included. Inline Gearbox TG112 series (112 x 55) included.

Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  12

Gearmotors - DC - Size 12

12mm Gearhead Body Diameter.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  20 Low Cost

Gearmotors - DC - Size 20 Low Cost

20mm Gearhead Body Diameter. Low cost. 70 RPM Output Speed. One model only. Reversible.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  25 Low Cost

Gearmotors - DC - Size 25 Low Cost

25mm Gearhead Body Diameter. 24.4mm Motor Body Diameter. Low cost. Reversible

D Shaped 4x8mm Output Shaft.

Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  27 Low Cost

Gearmotors - DC - Size 27 Low Cost

27mm Gearhead Body Diameter. Low cost. 36 RPM Output Speed. One model only. Reversible. 24mm motor body diameter.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  37/350 Low Cost

Gearmotors - DC - Size 37/350 Low Cost

37mm Gearhead Body Diameter. Low cost. 160 RPM Output Speed. One model only. Reversible.


Click for combined categories: All DC Gearmotors


Gearmotors - DC - Size  63 Ondrives

Gearmotors - DC - Size 63 Ondrives

Commutation: Graphite, No. of Sectors: 12. Magnets: Ferrite, Gearbox Type: Planetary, Gearbox Bushes: Rotary. Efficiency per Stage: 85%, Backlash: Less than 1o, Maximum Axial Load: 500N. Maximum Radial Load at 12.5mm: 350N, Operating Temperature Range: -15oC to +100oC, Mass: 1.8 to 2.6kg. Performance data is based upon an operating temperature of 25oC.

Click for combined categories: All DC Gearmotors


Gearmotors DC Permanent Magnet

Hide Pictures

Go to Top  


Gearmotors - DC PM - Size 29

Gearmotors - DC PM - Size 29

Permanent Magnet.

Max. Allowable Radial Load: 40N (10mm from mounting surface). Max. Allowable Axial Load: 15N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Gearmotors - DC PM - Size 30

Gearmotors - DC PM - Size 30

Permanent Magnet.

Max. Allowable Radial Load: 60N (10mm from mounting surface). Max. Allowable Axial Load: 20N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 7 segment commutator - RFI protection standard. High quality plastic gears - Terminal dimensions 2.8 x 0.5 - Weight: 180g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Gearmotors - DC PM - Size 35

Gearmotors - DC PM - Size 35

Permanent Magnet.

Max. Allowable Radial Load: 60N (10mm from mounting surface). Max. Allowable Axial Load: 5N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 7 segment commutator - RFI protection standard. High quality plastic gears - Terminal dimensions 2.8 x 0.5 - Weight: 180g - Gear drive made of metal gears Terminal dimensions 2.8 x 0.5 Weight: 150g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Gearmotors - DC PM - Size 47

Gearmotors - DC PM - Size 47

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Gearmotors - DC PM - Size 70x114

Gearmotors - DC PM - Size 70x114

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Gearmotors - DC PM - Size 70x129

Gearmotors - DC PM - Size 70x129

Permanent Magnet.

Max. Allowable Radial Load: 100N (20mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.5mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Gearmotors AC

Hide Pictures

Go to Top  


Gearmotors - A.C. Single Phase - Size 60

Gearmotors - A.C. Single Phase - Size 60

Max Capacitance - Induction Type - 50 Hz 1.0uf / 60 Hz 0.8 uF. Max Capacitance - Hysteresis Type - 0.8uf. Unit Weight Approx 0.8 KG. Machined Aluminium Housing - Steel Shaft. Steel / Phenolic Gears - Bronze Bearings.

Click for combined categories: All Right Angle Gearheads


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby - 12.1mm Diameter

Gearmotors - Basic - Hobby - 12.1mm Diameter

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.

Click for combined categories: All Basic Gearmotors


Gearmotors - Basic - Hobby Kits

Gearmotors - Basic - Hobby Kits

These gearmotor kits are of simple mainly plastic design. Great for making simple toys, hobbies or concept testing. Educational series.


Click for combined categories: All Basic Gearmotors


Gearmotors Open

Hide Pictures

Go to Top  


Gearmotors - Open Gear

Gearmotors - Open Gear

Perfect for applications where inspection of the gears is important, educational purposes or for visual effects.


Click for combined categories: All DC Permanent Magnet Gearmotors


Gearmotors

Hide Pictures

Go to Top  


Solarbotics Gearmotors

Solarbotics Gearmotors

Hobby gearmotors for all types of applications


Click for combined categories: All Solarbotics


Motors DC

Hide Pictures

Go to Top  


Motors - DC 12.0X30.0 mm

Motors - DC 12.0X30.0 mm

6.0V - 22800 RPM


Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 16.6X32.0 mm

Motors - DC 16.6X32.0 mm

M-500T Series 1.5 to 9 VDC - 1430 to 2230 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 18.9X18.0X9.5 mm

Motors - DC 18.9X18.0X9.5 mm

M-020 Series - 1 to 3 VDC - 3700 to 11000 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft. Weight Approx 9.5 grams.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 20.0X25.0 mm

Motors - DC 20.0X25.0 mm

1.5 to 4.5 VDC - 12,000 RPM unloaded at 3 volts


Click for combined categories: All DC Motors


Motors - DC 22.4X38.0 mm

Motors - DC 22.4X38.0 mm


Click for combined categories: All DC Motors


Motors - DC 23.6X25.0 mm

Motors - DC 23.6X25.0 mm

1.5 to 4.5 VDC - 12,500 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 23.8X30.6 mm

Motors - DC 23.8X30.6 mm

12 VDC - 12,300 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 24.3X12.35 mm

Motors - DC 24.3X12.35 mm

6.0 VDC - 4,900 RPM unloaded at 4.5 volts


Click for combined categories: All DC Motors


Motors - DC 25.0x20.1X15.1 mm

Motors - DC 25.0x20.1X15.1 mm

M-13 Series - 1.5 to 24 VDC - 4500 to 13760 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 25.0X21.0 mm

Motors - DC 25.0X21.0 mm

M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 26.9X23.8 mm

Motors - DC 26.9X23.8 mm

M-26 Series 1.5 to 24 VDC - 2500 to 15100 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 26.9X24.2X18.3 mm

Motors - DC 26.9X24.2X18.3 mm

MF-26 Series - 1.5 to 24 VDC - 3600 to 15900 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 27.6X51.0 mm

Motors - DC 27.6X51.0 mm

Compact, high torque and reliable 16,200 RPM unloaded at 6 volts


Click for combined categories: All DC Motors


Motors - DC 30.5X24.2 mm

Motors - DC 30.5X24.2 mm

M-28 Series 1.5 to 24 VDC - 2830 to 14250 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 30.5X24.2X18.3 mm

Motors - DC 30.5X24.2X18.3 mm

MF-28 Series - 1.5 to 24 VDC - 4470 to 13430 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC 35.8X71.0 mm

Motors - DC 35.8X71.0 mm

Compact, high torque and reliable 14,600 RPM unloaded at 12 volts


Click for combined categories: All DC Motors


Motors - DC 36.0X71.0 mm

Motors - DC 36.0X71.0 mm

High power, high speed 11,800 RPM unloaded at 12 volts


Click for combined categories: All DC Motors


Motors - DC 42.0X78.0 mm

Motors - DC 42.0X78.0 mm

High power, high speed 18,800 to 20,000 RPM unloaded 6 volts to 12 volts


Click for combined categories: All DC Motors


Motors - DC 42.0X85.0 mm

Motors - DC 42.0X85.0 mm

High power, high speed 9,700 RPM unloaded at 12 volts


Click for combined categories: All DC Motors


Motors - DC  6mm Diameter

Motors - DC 6mm Diameter

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Click for combined categories: All DC Motors


Motors - DC 8.0X10.0 mm

Motors - DC 8.0X10.0 mm

3.5V - 20500 RPM


Click for combined categories: All DC Motors

Related Information:
Batteries


Motors - DC  - Size 63 Ondrives

Motors - DC - Size 63 Ondrives

Performance data is based upon an operating temperature of 25oC.

Commutation: Graphite, No. of Sectors: 12. Brushes: Rotary, Magnets: Ferrite, Axial Backlash: Less than 0.15mm. Radial Backlash: Less than 0.15mm. Maximum Axial Load: 150N, Maximum Radial Load at 20mm: 150N. Maximum Shaft Push Pressure: 200N, Operating Temperature Range: -20oC to +85oC, Mass: 1.2 to 1.7kg.

Click for combined categories: All DC Motors


Motors - DC -  Size 80 Ondrives

Motors - DC - Size 80 Ondrives

Performance data is based upon an operating temperature of 25oC.

Commutation: Graphite, No. of Sectors: 12. Brushes: Rotary, Magnets: Ferrite, Axial Backlash: Less than 0.15mm. Radial Backlash: Less than 0.15mm. Maximum Axial Load: 180N, Maximum Radial Load at 30mm: 200N, Maximum Shaft Push Pressure: 200N. Maximum Operating Speed: 5,000 Rpm, Operating Temperature Range: -20oC to +85oC, Mass: 2.8 to 4kg. Maximum Housing Temperature: +80/84oC, Starting Voltage: 0.7V to 1.0V.

Click for combined categories: All DC Motors


Motors DC MAX Series

Hide Pictures

Go to Top  


Motors - DC - MAX 13

Motors - DC - MAX 13

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 21g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 16

Motors - DC - MAX 16

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 21g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 22

Motors - DC - MAX 22

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 54g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 32

Motors - DC - MAX 32

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 213g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Motors - DC - MAX 40

Motors - DC - MAX 40

Precious metal brush commutation system. See Gearheads - Ondrives - MAX Series for matching gearheads.

Operating Temperature Range: -30oC to +85oC (Max. rotor temperature +85oC), Mass: 187g. Low inductance - much longer brush life and low electrical noise. Low inertia - low mechanical time constant for fast acceleration and high speed stability. High efficiency - low current consumption, ideal for battery powered applications. Linear speed torque characteristics - easy accurate control ideal for servo applications.

Click for combined categories: All DC Motors


Power Adaptors

Hide Pictures

Go to Top  


Adaptors - Power - AC to DC - Fixed Plug

Adaptors - Power - AC to DC - Fixed Plug

SAA Approved Australian Adaptors for AC to DC. Fixed plug size.


Click for combined categories: All Power Adaptors


Adaptors - Power - AC to DC - Multi Plug

Adaptors - Power - AC to DC - Multi Plug

SAA Approved Australian Adaptors for AC to DC. Supplied with assorted plugs.


Click for combined categories: All Power Adaptors


Power Supplies

Hide Pictures

Go to Top  


Power Supplies

Power Supplies

24 V DC.

Standard : 24V DC Output, 110V AC input. Available on special order : 12V DC Output, 220/230V AC input.

Gearheads MAX

Hide Pictures

Go to Top  


Gearheads - MAX 13

Gearheads - MAX 13

Use with Motors - DC - Ondrives - Max series.

13mm planetary steel gearhead supplied with fitting kit to suit Size 13 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 1 Stage = 8N, 2 Stage = 12N, 3 Stage = 16N, 4 Stage = 20N, 5 Stage = 20N. Operating Temperature Range: -15oC to +100oC, Mass: 11-23g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 16

Gearheads - MAX 16

Use with Motors - DC - Ondrives - Max series.

16mm planetary steel gearhead supplied with fitting kit to suit Size 16 motors, sleeve bearing output. Maximum Axial Load: 8N. Maximum Radial Load at 6mm from Flange: 2 Stage = 15N, 5 Stage = 20N. Operating Temperature Range: -15oC to +65oC, Mass: 23-35g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 22

Gearheads - MAX 22

Use with Motors - DC - Ondrives - Max series.

22mm planetary steel gearhead supplied with fitting kit to suit Size 22 motors, sleeve bearing output. Maximum Axial Load: 100N. Maximum Radial Load at 10mm from Flange: 70N. Operating Temperature Range: -15oC to +80oC, Mass: 55-94g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 32

Gearheads - MAX 32

Use with Motors - DC - Ondrives - Max series.

32mm planetary steel gearhead supplied with fitting kit to suit Size 32 motors, sleeve bearing output. Maximum Axial Load: 120N. Maximum Radial Load at 12mm from Flange: 140N. Operating Temperature Range: -15oC to +80oC, Mass: 118-226g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Gearheads - MAX 40

Gearheads - MAX 40

Use with Motors - DC - Ondrives - Max series.

38mm spur steel gearhead supplied with fitting kit to suit Size 40 motors, sleeve bearing output. Maximum Axial Load: 30N. Maximum Radial Load at 5mm from Bearing: 50N. Operating Temperature Range: -5oC to +65oC, Mass: 60-75g. Usable output torque depends on torque from motor.

Click for combined categories: All MAX Gearheads


Brakes

Hide Pictures

Go to Top  


Brakes - Flange Mounted - Power On - Combinorm

Brakes - Flange Mounted - Power On - Combinorm

After applying DC voltage (standard 24 V DC) the armature is attracted by the force of a magnetic field. over the air gap to the brake magnet or rotor. This results in a frictionally engaged connected (for single-face elements) or a positive-locking connection (for tooth clutches). 24 V DC.

Related Information:
Full Catalogue Pages


Couplings Other

Hide Pictures

Go to Top  


Couplings - Clutch - Shaft Mounted

Couplings - Clutch - Shaft Mounted

0.565 to 14 N.m. For in-line loads.

24 Volt DC. Zero Backlash Armature. For in-line loads. Dynamic torque is 80% of static torque. 0.565 N.m Models have no keyway in rotor.

Related Information:
Shafting


Brakes

Hide Pictures

Go to Top  


Brakes - Magnetic - Particle

Brakes - Magnetic - Particle

Zero Backlash - Low Inertia - No Friction Surface.

24 V DC. Shaft becomes coupled to housing with electrical excitation. Torque is proportional to the DC input current.

Castors

Hide Pictures

Go to Top  


Castors - Ball - Style D

Castors - Ball - Style D

Similar to an inverted ball transfer with lower load capacity. Used to support and move furniture and equipment with a free range of movement in any direction.

Can be used inverted as a low load ball transfer. Made from carbon steel.

Click for combined categories: All Ball Castors and Transfers


Hubs

Hide Pictures

Go to Top  


Hubs - Gear and Dial - Removable Type

Hubs - Gear and Dial - Removable Type

Diameters MD and d concentric within 0.0076 mm T.I.R (Total Indicator Runout).

Click for combined categories: All Hubs


Plungers Ball

Hide Pictures

Go to Top  


Plungers - Ball - Threaded - With Limit Switch

Plungers - Ball - Threaded - With Limit Switch

Supply Cable : Grey Two Phase for normally open contacts, black for normally closed. Temp (Body): -40 oC to 170 deg C Temp (Cable): -10 deg C to 50 deg C. Electrical Supply : 20 mA DC / 50 mA DC. Voltage : 24V Supply Cable 2.8mm - 2 Phase. Safety Standard : IP40 Average Switch Life Span : 56 Switching.

Click for combined categories: All Threaded Ball Plungers


Clutches

Hide Pictures

Go to Top  


Clutches - Magnetic Particle 24VDC

Clutches - Magnetic Particle 24VDC

Ultrafast Responses.

The input shaft becomes coupled to the output shaft with electrical excitation. Shafts have a flat on the end. Soft or fast start.

Click for combined categories: All Magnetic Clutches


Clutches - Shaft Mounted

Clutches - Shaft Mounted

24 V DC - Zero Backlash Armature - For parallel loads.

This basic information is designed to assist you to make a decision on which clutch to use. Full dimensions available on request.

Brakes

Hide Pictures

Go to Top  


Sensor - Ultrasonic - For Brakes

Sensor - Ultrasonic - For Brakes

For maintaining constant tension when using a brake for producing unwind tension.

Also used when using a clutch for rewind tension. When target is within range the LED Status Indicator glows continuously. Uses Power Supply S90MPS-24 (See category - Power Supplies). Sensor measures diameter of the roll and sends a 0-10V DC signal to power supply. Torque is automatically varied as roll size changes to keep constant tension.

Clutches

Hide Pictures

Go to Top  


Clutches - Combinorm - Power On

Clutches - Combinorm - Power On

Applying a standard 24 V DC the armature is attracted by the force of a magnetic field. This results in a frictionally engaged connected (for single-face elements). or a positive-locking connection (for tooth clutches).

Related Information:
Full Catalogue Pages


Clutches - Magnetic - Bu-Ord Size 11

Clutches - Magnetic - Bu-Ord Size 11

Breakaway Torque (Energised) at 24-28 V DC : 10.8g.cm (0.15 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Shafts A & B coupled when energised, braked when de-energised. Inertia (De-Energised) at 24-28 VDC : 0.94g.cm sq (0.013 oz.in sq). Inertia (Energised) at 24-28 VDC : 2.09g.cm sq (0.029 oz.in sq).

Click for combined categories: All Magnetic Clutches


Clutches - Magnetic - Bu-Ord Size 18

Clutches - Magnetic - Bu-Ord Size 18

Breakaway Torque (Energised) at 24-28 VDC : 14.4g.cm (0.20 oz.in). Breakaway Torque (De-Energised) at 24-28 VDC : 4.3g.cm (0.06 oz.in). Shafts a & B coupled when energised, braked when de-energised. Inertia (De-Energised) at 24-28 VDC : 2.74g.cm sq(0.038 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.18g.cm sq (0.072 oz.in sq).

Click for combined categories: All Magnetic Clutches


Clutch Brakes - Magnetic - Bu-Ord Size 11

Clutch Brakes - Magnetic - Bu-Ord Size 11

Breakaway Torque (Energised) at 24-28 V DC : 10.8g.cm (0.15 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Shafts A & B coupled when energised, B shaft braked when de-energised. Inertia (De-Energised) at 24-28 VDC : 2.38g.cm sq (0.013 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.3g.cm sq (0.029 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Clutch Brakes - Magnetic - Bu-Ord Size 18

Clutch Brakes - Magnetic - Bu-Ord Size 18

Breakaway Torque (Energised) at 24-28 V DC : 14.4g.cm (0.20 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 2.2g.cm (0.03 oz.in). Shafts A & B coupled when energised, B shaft braked when de-energised. Inertia (Energised) at 24-28 VDC : 5.11g.cm sq (0.071 oz.in sq). Inertia (Energised) at 24-28 VDC : 7.56g.cm sq (0.105 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Clutches - Magnetic - Bu-Ord Size 18 - Triplex

Clutches - Magnetic - Bu-Ord Size 18 - Triplex

Breakaway Torque (Energised) at 24-28 VDC : 14.4g.cm (0.20 oz.in). Breakaway Torque (De-Energised) at 24-28 VDC : 4.3g.cm (0.06 oz.in). Shafts A & B coupled when energised (terminals 1 and 2). Shafts A & C coupled when energised (terminals 3 and 4). Inertia (Energised) at 24-28 VDC : 19.2g.cm sq (0.108 oz.in sq) either coil, 25.86g.cm sq (0.145 oz.in sq) both coils.

Click for combined categories: All Magnetic Clutches


Clutches - Magnetic - Bu-Ord Size 11 - Reverse Acting

Clutches - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 18g.cm (0.25 oz.in). Breakaway Torque (De-energised) at 24-28 V DC : 7.2g.cm (0.10 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.4g.cm sq (0.041 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.0g.cm sq (0.028 oz.in sq).

Click for combined categories: All Magnetic Clutches


Clutches - Magnetic - Bu-Ord Size 18 - Reverse Acting

Clutches - Magnetic - Bu-Ord Size 18 - Reverse Acting

Breakaway Torque (Energised) at 24-28 VDC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 VDC : 14.4g.cm (0.2 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 19g.cm sq (0.134 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.18g.cm sq (0.103 oz.in sq).

Click for combined categories: All Magnetic Clutches


Brakes

Hide Pictures

Go to Top  


Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Backlash (Enaged) Friction Types : 5 Min Max. Backlash (Enaged) Crown Tooth Types : 10 Min Max.

Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Backlash (Enaged) : 5 Min Max. Power Consumption at 24 V DC : 3.7 watts.

Clutches

Hide Pictures

Go to Top  


Clutch Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Clutch Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 18g.cm (0.25 oz.in). Breakaway Torque (De-energised) at 24-28 V DC : 7.2g.cm (0.10 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.4g.cm sq (0.041 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.1g.cm sq (0.028 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Clutch Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Clutch Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 14.4g.cm (0.2 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.27g.cm sq (0.101 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.11g.cm sq (0.071 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Brakes

Hide Pictures

Go to Top  


Brakes - Flange Mounted - Power On - SDP

Brakes - Flange Mounted - Power On - SDP

Anti backlash when energised - zero drag when de-energised.

24 V DC.


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155124 products in 3632 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.