Cup Washers - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

W00380-01030-00240-CUP-3 found in Washers - Cup - Stainless Steel
Nom. ID (A): 3.80. Nom. OD (B): 10.30. Nom. Section (C): 2.40.

Stock: 350


Matching Part

W00440-01190-00240-CUP-3 found in Washers - Cup - Stainless Steel
Nom. ID (A): 4.40. Nom. OD (B): 11.90. Nom. Section (C): 2.40.

Stock: 2


Matching Part

W00440-01310-00290-CUP-NY found in Washers - Cup - Nylon
Inside Diameter (ID): 4.40. Outside Diameter (OD): 13.10. Thickness (T): 2.90.

Stock: 82


Matching Part

W00480-01470-00390-CUP-NY found in Washers - Cup - Nylon
Inside Diameter (ID): 4.80. Outside Diameter (OD): 14.70. Thickness (T): 3.90.

Stock: 85


Matching Part

W00550-01430-00280-CUP-3 found in Washers - Cup - Stainless Steel
Nom. ID (A): 5.50. Nom. OD (B): 14.30. Nom. Section (C): 2.80.

Stock: 150


Matching Part

W00610-01510-00280-CUP-3 found in Washers - Cup - Stainless Steel
Nom. ID (A): 6.10. Nom. OD (B): 15.10. Nom. Section (C): 2.80.

Stock: 84


Matching Part

W00640-01730-00460-CUP-NY found in Washers - Cup - Nylon
Inside Diameter (ID): 6.40. Outside Diameter (OD): 17.30. Thickness (T): 4.60.

Stock: 90


Matching Part

W00820-01980-00320-CUP-3 found in Washers - Cup - Stainless Steel
Nom. ID (A): 8.20. Nom. OD (B): 19.80. Nom. Section (C): 3.20.

Stock: 2


Matching Part

W00340-00950-00210-CUP-BR found in Washers - Cup - Brass - Nickel Plated
Nom. ID (A): 3.40. Nom. OD (B): 9.50. Nom. Section (C): 2.10.

Backorder


Matching Part

W00360-01110-00250-CUP-NY found in Washers - Cup - Nylon
Inside Diameter (ID): 3.60. Outside Diameter (OD): 11.10. Thickness (T): 2.50.

Backorder



Washers Finishing

Hide Pictures

Go to Top  


Washers - Cup - Stainless Steel

Washers - Cup - Stainless Steel

For countersunk screws.

Stainless Steel cup washers.

Click for combined categories: All Cup Washers


Washers - Cup - Nylon

Washers - Cup - Nylon

Countersunk washers for use with screws for decorative finishing


Click for combined categories: All Cup Washers


Washers - Cup - Steel - Nickel Plated

Washers - Cup - Steel - Nickel Plated

Countersunk washers for use with screws for decorative finishing


Click for combined categories: All Cup Washers


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - PVC

Washers - Flat - PVC

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Serrated Locking

Hide Pictures

Go to Top  


Washers - Disk Lock

Washers - Disk Lock

Also see Nord Lock and Lockrite washers

Stainless Grade Grade A2 302/316 18-8. Vibration-proof self tightening structural locking device. Maximum Working Temp: +430oC. DISC-LOCKR has outperformed all other types of loose, washered, threaded or pinned systems. in a wide range of high stress, corrosive, and vibration sensitive applications.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - PTFE

Washers - Flat - PTFE

Teflon Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Fibre

Hide Pictures

Go to Top  


Washers - Flat - Fibre

Washers - Flat - Fibre

Flat red vulcanised fibre washers. Black available on request and sufficient quantity.

Operating temperature up to 105 Deg C. Tensile strength 6 kg/mm2. Elongation up to 19 percent. Shrinkage up to 3 percent thickness. Water absorption 4 to 70 percent after 24 hours. Density 1 to 1.45 g/cm.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - Nylon

Washers - Flat - Nylon

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Aluminium

Washers - Flat - Aluminium

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Mild Steel

Washers - Flat - Mild Steel

Flat washers. Includes fender washers. Zinc plated and unplated listings.

In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 2 Wave Type

Washers - Spring - 2 Wave Type

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - High Tensile

Washers - Flat - High Tensile

Grade 8 high tensile washers

ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Bonded Neoprene

Washers - Flat - Bonded Neoprene

Galvanised sealing washers with neoprene centre for use with self drilling screws

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Precision

Washers - Flat - Brass - Precision

Precision Tolerances. Laminated brass shim washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Brass - Commercial

Washers - Flat - Brass - Commercial

Flat washers.

Please note! Tolerances for commercial grade washers are much larger than for precision washers. In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Titanium - CP Grade 1

Washers - Flat - Titanium - CP Grade 1

Flat washers. CP Grade 1 Titanium.

CP Grade 1. Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - Curved - Spring Steel

Washers - Spring - Curved - Spring Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers - Spring - Curved - Stainless Steel

Washers - Spring - Curved - Stainless Steel

Wave Washers - All Materials.


Click for combined categories: All Wave Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Sintered Bronze - Precision

Washers - Flat - Sintered Bronze - Precision

Flat thrust washers made from oil impregnated sintered bronze

Click for combined categories: All Flat Washers and Spacers - Metallic


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 3 Wave Type - Berryllium Copper

Washers - Spring - 3 Wave Type - Berryllium Copper

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - Spring Steel

Washers - Spring - 3 Wave Type - Spring Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Sets - Hardened Steel

Washers - Self Aligning - Sets - Hardened Steel

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers - Self Aligning - Sets - Stainless Steel

Washers - Self Aligning - Sets - Stainless Steel

Spherical Seat Washers

AISI 303 Stainless Steel. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Stainless Steel - Commercial

Washers - Flat - Stainless Steel - Commercial

Flat washers.

Dimensions are nominal. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Spring Washers

Hide Pictures

Go to Top  


Washers - Spring - 3 Wave Type - 302 Stainless Steel

Washers - Spring - 3 Wave Type - 302 Stainless Steel

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers - Spring - 3 Wave Type - 400 Grade Stainless

Washers - Spring - 3 Wave Type - 400 Grade Stainless

Wave Washers - also called crinkle wave.


Click for combined categories: All Wave Washers


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Components - Hardened Steel

Washers - Self Aligning - Components - Hardened Steel

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers - Self Aligning - Components - Stainless Steel

Washers - Self Aligning - Components - Stainless Steel

Spherical Seat Washers

AISI 303 Stainless Steel. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Carbon Spring Steel - Precision Shim

Washers - Flat - Carbon Spring Steel - Precision Shim

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gamg cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - C - Steel

Washers - C - Steel

Cold finished steel, case hardened with a black oxide finish.


Click for combined categories: All C Washers


Washers - C - Swing

Washers - C - Swing

Cold finished steel, hardened and ground. Black oxide finish.


Washers Serrated Locking

Hide Pictures

Go to Top  


Washers - LockRite

Washers - LockRite

Supplied in pairs.

Also see Nordlock and Disk Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers Flat Plastic

Hide Pictures

Go to Top  


Washers - Flat - Peek

Washers - Flat - Peek

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Flat Rubber

Hide Pictures

Go to Top  


Washers - Flat - Rubber

Washers - Flat - Rubber

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Thrust

Hide Pictures

Go to Top  


Washers - Thrust - DP4 Type

Washers - Thrust - DP4 Type

Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.

Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.

Click for combined categories: All Thrust Washers


Washers - Thrust - DU Type

Washers - Thrust - DU Type

Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE).

Operating temperature - 200o to 280o celsius. Maximum load 250N per mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments.

Click for combined categories: All Thrust Washers


Washers - Thrust - DX Type

Washers - Thrust - DX Type

Provides maintenance free operation.

Opertating temperature minus 40o to plus 120 Degress Celsius. Provides maintenance free operation. Exhibits low wear rate. Seizure resistant. High Static and Dynamic Load capacity. Good frictional prperties, No water absorption, Compact and Light, Suitable for rotating, oscillating, reiprocating and sliding movements.

Click for combined categories: All Thrust Washers


Washers Locking

Hide Pictures

Go to Top  


Washers - Serrated - Safety

Washers - Serrated - Safety

Spring Steel Hardened Black.

Washers Shoulder

Hide Pictures

Go to Top  


Washers - Shoulder - Nylon

Washers - Shoulder - Nylon


Click for combined categories: All Shoulder Washers


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - Split - Steel

Washers - Lock - Split - Steel

Plain and zinc plated

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - C - 303 Stainless Steel

Washers - C - 303 Stainless Steel

Knurled outside edge


Click for combined categories: All C Washers


Washers - Flat - Hardened Steel

Washers - Flat - Hardened Steel

Medium carbon steel through hardened to RC 43-49. Zinc dichromate finish. All dimensions shows are minimum.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - Split - Grade 8

Washers - Lock - Split - Grade 8

Zinc plated


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Split - Titanium

Washers - Lock - Split - Titanium

Dimensions are nominal and may vary between batches.

Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers Serrated Locking

Hide Pictures

Go to Top  


Washers - Nord Lock - Zinc Plated

Washers - Nord Lock - Zinc Plated

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - Tabbed - Heavy Duty

Washers - Lock - Tabbed - Heavy Duty

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.

Click for combined categories: All Tabbed Lock Washers

Click for combined categories: All Lock Washers


Washers Serrated Locking

Hide Pictures

Go to Top  


Washers - Nord Lock - 316 Stainless

Washers - Nord Lock - 316 Stainless

Supplied in pairs

Steel: Hardness HRA 75+/-3% (HRC48) Passivated Zinc Plated. ALWAYS LUBRICATE FASTENERS BEFORE REUSING. When reusing fasteners the friction is always higher. When tightening, a 20% higher torque should be applied than if tightening against a flat washer. Also see Lockrite and Disc Lock washers.

Click for combined categories: All Serrated Locking Washers

Click for combined categories: All Lock Washers


Washers Square

Hide Pictures

Go to Top  


Washers - Square - Heavy Duty - Steel

Washers - Square - Heavy Duty - Steel


Click for combined categories: All Square Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Heavy Duty - Machined - Steel

Washers - Heavy Duty - Machined - Steel

Case hardened cold finished steel with black oxide finish.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - Split - Stainless Steel

Washers - Lock - Split - Stainless Steel

304 Grade Stainless Steel


Click for combined categories: All Split Lock Washers

Click for combined categories: All Lock Washers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Stainless Steel - Precision Ground

Washers - Flat - Stainless Steel - Precision Ground

Non magnetic and corrosion resistant. Sides are flat and parallel to within 0.025mm (0.001 in.)

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stainless Steel - Precision Shim

Washers - Flat - Stainless Steel - Precision Shim

Precision Tolerances.


Click for combined categories: All Precision Shim Washers

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Flat - Stamped - Heavy Duty - Hardened

Washers - Flat - Stamped - Heavy Duty - Hardened

Heat treated. Black oxide finish.

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers - Heavy Duty - Machined - Stainless Steel

Washers - Heavy Duty - Machined - Stainless Steel

303 Stainless Steel

Click for combined categories: All Flat Washers and Spacers - Metallic


Washers Lock

Hide Pictures

Go to Top  


Washers - Lock - External Tooth - Spring Steel

Washers - Lock - External Tooth - Spring Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - External Tooth - Stainless Steel

Washers - Lock - External Tooth - Stainless Steel

Dimensions are nominal and may vary between batches.

Click for combined categories: All External Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Spring Steel

Washers - Lock - Internal Tooth - Spring Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers - Lock - Internal Tooth - Stainless Steel

Washers - Lock - Internal Tooth - Stainless Steel

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.

Click for combined categories: All Internal Tooth Lock Washers

Click for combined categories: All Lock Washers


Washers Square

Hide Pictures

Go to Top  


Washers - Square - Heavy Duty - 304 Stainless Steel

Washers - Square - Heavy Duty - 304 Stainless Steel


Click for combined categories: All Square Washers


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Plastic

Washers - Disc Spring - Plastic

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - PolysorbR material.

Click for combined categories: All Disc Springs


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Roller - Washers

Bearings - Thrust - Roller - Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are a guide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Plungers Ball

Hide Pictures

Go to Top  


Washers - for Indexing Pull Knobs

Washers - for Indexing Pull Knobs

The washer is slid beneath the disengaged pull knob so that the follower pins engage in the slot.


Click for combined categories: All Indexing Plungers

Related Information:
Plungers to Suit with Locknut


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Carbon Steel

Washers - Disc Spring - Carbon Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Stainless Steel

Washers - Disc Spring - Stainless Steel

Also known as belleville washers.

Manufactured under strict quality control to conform to DIN 2093.

Click for combined categories: All Disc Springs


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Washers Only - Chrome Steel

Bearings - Thrust - Ball - Washers Only - Chrome Steel

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Screws Thumb

Hide Pictures

Go to Top  


Screws - Thumb - Flat Key Head - Washer Face - Steel

Screws - Thumb - Flat Key Head - Washer Face - Steel

Flat Key head malleable iron screws with an integral washer


Click for combined categories: All Thumb Screws


Screws - Thumb - Knurled - Washer Face - Aluminium

Screws - Thumb - Knurled - Washer Face - Aluminium

Knurled head aluminum thumb screws with an integral washer


Click for combined categories: All Thumb Screws


Screws - Thumb - Knurled - Washer Face - Brass

Screws - Thumb - Knurled - Washer Face - Brass

Knurled head brass thumb screws with an integral washer


Click for combined categories: All Thumb Screws


Screws - Thumb - Knurled - Washer Face - Nylon

Screws - Thumb - Knurled - Washer Face - Nylon

Knurled head nylon thumb screws with an integral washer


Click for combined categories: All Thumb Screws


Screws - Thumb - Knurled - Washer Face - Stainless Steel

Screws - Thumb - Knurled - Washer Face - Stainless Steel

Knurled head stainless steel thumb screws with an integral washer


Click for combined categories: All Thumb Screws


Screws - Thumb - Knurled - Washer Face - Steel

Screws - Thumb - Knurled - Washer Face - Steel

Knurled head steel thumb screws with an integral washer


Click for combined categories: All Thumb Screws


Screws - Thumb - Wing - Washer Face - Steel

Screws - Thumb - Wing - Washer Face - Steel

Wing head malleable iron screws with an integral washer


Click for combined categories: All Thumb Screws


Screws Self Tapping

Hide Pictures

Go to Top  


Screws - Self Drilling - Hex Head - With Washers

Screws - Self Drilling - Hex Head - With Washers

With bonded neoprene washer. Galvanised for corrosion resistance.


Click for combined categories: All Self Drilling Screws


Bumpers

Hide Pictures

Go to Top  


Bumpers - Round - Urethane - Female Washer

Bumpers - Round - Urethane - Female Washer

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.


Click for combined categories: All Female Bumpers

Click for combined categories: All Bumpers


Hoist Rings

Hide Pictures

Go to Top  


Washers - Bevel

Washers - Bevel

For use with eyebolts to correct taper when used on I beams and other structural applications. Bevelled 2 in 12 which is standard for flanges of I beams and channels.

Malleable iron with black finish.

Click for combined categories: All Hoist Rings


Screws Hex Head

Hide Pictures

Go to Top  


Screws - Hex Washer Head - Black Nylon

Screws - Hex Washer Head - Black Nylon

1/4 UNC and UNF only

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Click for combined categories: All Machine Screws

Click for combined categories: All Plastic Screws


Screws Self Tapping

Hide Pictures

Go to Top  


Screws - Self Drilling - Hex Washer Head

Screws - Self Drilling - Hex Washer Head

Zinc chromate. Fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.


Click for combined categories: All Self Drilling Screws


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Ball Bearing Type

Washers - Disc Spring - Ball Bearing Type

Specially designed for preloading ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Washers - Disc Spring - Flange Locking Type

Washers - Disc Spring - Flange Locking Type

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Suction Cups

Hide Pictures

Go to Top  


Suction Cups

Suction Cups

EPDM or Natural Rubber as listed against each item

EPDM is a higher grade rubber that rates excellent for ozone resistance and is used for molded parts used outdoors. SBR is Styrene-butadiene Rubber is a general purpose rubber but not recommended for continual use outdoors or in oily environments.

Magnets Cup

Hide Pictures

Go to Top  


Magnets - Cup Assemblies - Clips

Magnets - Cup Assemblies - Clips


Click for combined categories: All Magnets

Click for combined categories: All Cup Magnets


Magnets - Cup Assemblies - Loop

Magnets - Cup Assemblies - Loop

Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.

Plated cup with a 9.525mm ID loop.

Click for combined categories: All Magnets

Click for combined categories: All Cup Magnets


Magnets - Cup Assemblies - Stud

Magnets - Cup Assemblies - Stud


Click for combined categories: All Magnets

Click for combined categories: All Cup Magnets


Magnets - Cup Assemblies - Through Hole

Magnets - Cup Assemblies - Through Hole


Click for combined categories: All Magnets

Click for combined categories: All Cup Magnets


Latches

Hide Pictures

Go to Top  


Latches - Cup - Flush

Latches - Cup - Flush

Polished stainless steel cup and bracket. Handle is diecast zinc, chrome plated. Set grip during installation. Includes mounting studs, mounting nuts and lockwashers. Grip range 27.7 to 39.6mm.

Max working load 44kg. Ultimate load 110kg. Turns clockwise to latch.

Screws Square Head

Hide Pictures

Go to Top  


Screws - Set - Cup Point - Square Head

Screws - Set - Cup Point - Square Head

Grade 8 hreat treated alloy steel. All screws are threaded to the head.


Hooks

Hide Pictures

Go to Top  


Hooks - Ball - Cup - 304 Stainless

Hooks - Ball - Cup - 304 Stainless

Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.


Hooks - Ball - Half Cup - 304 Stainless

Hooks - Ball - Half Cup - 304 Stainless

Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.


Screws Socket Set (Grub Screws)

Hide Pictures

Go to Top  


Socket Set Screws - Cup Point - Peek - DIN913

Socket Set Screws - Cup Point - Peek - DIN913


Click for combined categories: All Grub Screws


Isolators

Hide Pictures

Go to Top  


Mounts - Vibration - Isolation - Cup Style 2

Mounts - Vibration - Isolation - Cup Style 2

Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.

High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.

Click for combined categories: All Cup Mounts


Screws Socket Set (Grub Screws)

Hide Pictures

Go to Top  


Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN913

Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN913

Standard grub screws. UNC - UNF - BA - METRIC.


Click for combined categories: All Grub Screws


Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN913

Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN913

Standard grub screws. UNC - UNF - BA - METRIC.


Click for combined categories: All Grub Screws


Socket Set Screws - Cup Point - Titanium - CP1 - DIN913

Socket Set Screws - Cup Point - Titanium - CP1 - DIN913

Standard DIN913 grub screws in CP1 Commercially Pure Titanium Grade 1.


Click for combined categories: All Grub Screws


Socket Set Screws - Cup Point - Titanium - Ti-Gr5/Ti-6AI4v - DIN913

Socket Set Screws - Cup Point - Titanium - Ti-Gr5/Ti-6AI4v - DIN913

Standard DIN913 grub screws in Ti-Gr5/Ti-6AI4v Titanium.


Click for combined categories: All Grub Screws


Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN913

Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN913

Standard grub screws. UNC - UNF - BA - METRIC.


Click for combined categories: All Grub Screws


Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN913

Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN913

Standard grub screws. UNC - UNF - BA - METRIC.


Click for combined categories: All Grub Screws


Dental Handpiece Parts

Hide Pictures

Go to Top  


Several Dental Washers Parts

Several Dental Washers Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Mounts Cup

Hide Pictures

Go to Top  


Mounts - Cupmounts - Industrial

Mounts - Cupmounts - Industrial

Protext against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.

Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.

Click for combined categories: All Cup Mounts


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Cage and Balls Only - Chrome Steel

Bearings - Thrust - Ball - Cage and Balls Only - Chrome Steel

Match with thrust washers of the same bore and OD.


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.