Quick Delivery Items: Cross Axis Gearboxes - Small Parts And Bearings Categories


Gearboxes Cross Axis

Hide Pictures

Go to Top  


Gearboxes - Cross Axis - 110 x  95 x  38mm

Gearboxes - Cross Axis - 110 x 95 x 38mm

Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis -  90 x  75 x  32mm

Gearboxes - Cross Axis - 90 x 75 x 32mm

Worm and Wormwheel box. 5.0 to 18.0Nm. 5:1 to 120:1 ratios. P40 and PF40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis - 136.5 x 111.1 x  63.5

Gearboxes - Cross Axis - 136.5 x 111.1 x 63.5

Worm gears.

Maximum input speed 1800 RPM. Approx weight 2.7 KG (6 lb).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis - 150 x  96 x  96 A

Gearboxes - Cross Axis - 150 x 96 x 96 A

Helical or Wormwheel Gears. 25mm Bores. E60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Helical Gears and Worms : Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Worm Wheel : Aluminium Bronze (CA104 / AB2). Circlips : Steel (not plated). Bearing : Steel 2RS (Rubber seals fitted).

Click for combined categories: All Cross Axis Gearboxes

Related Information:
Output Shafts


Gearboxes - Cross Axis -  38.9 x  31.8 x  19.1mm

Gearboxes - Cross Axis - 38.9 x 31.8 x 19.1mm

Worm Gears - Precision.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 oC to +146 oC (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  52.4 x  44.5 x  25.4

Gearboxes - Cross Axis - 52.4 x 44.5 x 25.4

Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 oC to +146 oC (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  77.8 x  63.5 x  34.9

Gearboxes - Cross Axis - 77.8 x 63.5 x 34.9

Worm Gears. Precision Quality - Input Speeds up to 6000 RPM.

Max Input : 6000 RPM. Backlash at Output : 0 Deg 30 Min. Packed with grease at assembly - temp range -32 oC to +146 oC (-25 F to 295 F).

Click for combined categories: All Cross Axis Gearboxes


Gearboxes - Cross Axis -  85.6 x  66.7 x  34.9

Gearboxes - Cross Axis - 85.6 x 66.7 x 34.9

Worm Gears - Commercial size 26.

Maximum input speed 1800 RPM. Approx weight 0.6 KG (20 oz).

Click for combined categories: All Cross Axis Gearboxes


Positioning

Hide Pictures

Go to Top  


Ball Slides and Crossed Roller Positioning Stages

Ball Slides and Crossed Roller Positioning Stages

Used for Gauging and Positioning Light to Medium Loads.

Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish.

Gearboxes Tee

Hide Pictures

Go to Top  


Gearboxes - Tee -  36.5 x  36.5 x 29.4mm

Gearboxes - Tee - 36.5 x 36.5 x 29.4mm

GDRAB Series. Miniature gearbox.


Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  62.5 x  50.8 x  30.0mm

Gearboxes - Tee - 62.5 x 50.8 x 30.0mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Tee Gearboxes


Gearboxes - Tee -  85.5 x  77.8 x  31.8mm

Gearboxes - Tee - 85.5 x 77.8 x 31.8mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Tee Gearboxes


Gearboxes Bu-Ord

Hide Pictures

Go to Top  


Gearboxes - Bu-Ord - Size 11 - Double End

Gearboxes - Bu-Ord - Size 11 - Double End

SRBO11 Series.

Items listed as Zero Backlash are for loads less than the ZB Torque Limit shown. Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes - Bu-Ord - Size 15 - Double End

Gearboxes - Bu-Ord - Size 15 - Double End

SRBO15 Series.

Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes - Bu-Ord - Size 15 - Single End

Gearboxes - Bu-Ord - Size 15 - Single End

SRBO15 Series.

Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes - Bu-Ord - Size 18 - Double End

Gearboxes - Bu-Ord - Size 18 - Double End

SRBO18 Series.

Not recommended to be used as speed increasers - speed reducers only.

Click for combined categories: All Bu-Ord Gearboxes


Gearboxes Right Angle

Hide Pictures

Go to Top  


Gearboxes - Right Angle - Model RA 0300-0300-0180 - 30.0 x  30.0 x 18.0mm

Gearboxes - Right Angle - Model RA 0300-0300-0180 - 30.0 x 30.0 x 18.0mm

Economy Bevel Gear Type. Miniature gearbox.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0365-0365-0294 - 36.5 x  36.5 x 29.4mm

Gearboxes - Right Angle - Model RA 0365-0365-0294 - 36.5 x 36.5 x 29.4mm

1:1 ratio. GDRA Series. Miniature gearbox.


Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0400-0400-0200 - 40.0 x  40.0 x 20.0mm

Gearboxes - Right Angle - Model RA 0400-0400-0200 - 40.0 x 40.0 x 20.0mm

Mitre Gears 1:1 ratio. GDRA Series. Miniature gearbox.

Max Speed 3000 RPM. Max Backlash 1o. Ball bearings both ends. Base mounting both sides.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0500-0500-0300 - 50.0 x  50.0 x 30.0mm

Gearboxes - Right Angle - Model RA 0500-0500-0300 - 50.0 x 50.0 x 30.0mm

Economy Bevel Gear Type. GDRA Series.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0625-0508-0300 - 62.5 x  50.8 x 30.0mm

Gearboxes - Right Angle - Model RA 0625-0508-0300 - 62.5 x 50.8 x 30.0mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0630-0630-0400 - 63.0 x  63.0 x 40.0mm

Gearboxes - Right Angle - Model RA 0630-0630-0400 - 63.0 x 63.0 x 40.0mm

Economy Bevel Gear Type. GDRABE Series.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x  75.0 x 44.0mm

Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm

BLH40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0855-0778-0318 - 85.5 x  77.8 x  31.8mm

Gearboxes - Right Angle - Model RA 0855-0778-0318 - 85.5 x 77.8 x 31.8mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle Model RA 0400-0400-0250(B) - 40.0 x  40.0 x 25.0mm (B)

Gearboxes - Right Angle Model RA 0400-0400-0250(B) - 40.0 x 40.0 x 25.0mm (B)

Economy Bevel Gear Type. GDRA Series. Miniature gearbox.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes Tee

Hide Pictures

Go to Top  


Gearboxes - Tee -  38.9 x  38.1 x 27.0mm B

Gearboxes - Tee - 38.9 x 38.1 x 27.0mm B

1:1, 2:1 and 3:1 ratios. GDRA Series. Miniature gearbox.

Max Speed 2000 RPM. Max Backlash 5o. Bevel Gears.

Click for combined categories: All Tee Gearboxes


Gearboxes Offset

Hide Pictures

Go to Top  


Gearboxes - Offset -  60 x  60

Gearboxes - Offset - 60 x 60

Base mounted. SRBM60 Series.

Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : Less than 0.11mm / Less than 0.31mm. Operating Temp : -10 to 60 oC | Approx weight : 26 grams.

Click for combined categories: All Offset Gearboxes


Gearboxes Right Angle

Hide Pictures

Go to Top  


Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

1 to 1 ratio with rated speeds up to 1800rpm. Sealed gearcase. Key drive shafts. Keys included.

4140 Heat Treated steel gears and shafts. Aluminium alloy hard anodised case. Maximum operating temperature 90 oC (200 Deg F). Optional foot mount plates available - also listed in this category.

Click for combined categories: All Right Angle Gearboxes


Gearboxes Educational Kits

Hide Pictures

Go to Top  


Educational Gearbox Kits

Educational Gearbox Kits

Basic gearbox kits for prototyping, testing and learning


Cross Blocks

Hide Pictures

Go to Top  


Cross Blocks - Heavy Duty - One Knob One Nut

Cross Blocks - Heavy Duty - One Knob One Nut

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Cross Blocks - Heavy Duty - Two Knobs

Cross Blocks - Heavy Duty - Two Knobs

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Cross Blocks - Heavy Duty - Two Nuts

Cross Blocks - Heavy Duty - Two Nuts

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.

Click for combined categories: All Cross Blocks

Click for combined categories: All Swivel Joints and Cross Blocks


Knobs Cross

Hide Pictures

Go to Top  


Knobs - Cross - Blind - Female

Knobs - Cross - Blind - Female


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Knobs - Cross - Standard - Female

Knobs - Cross - Standard - Female


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Knobs - Cross - Standard - Male

Knobs - Cross - Standard - Male


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Knobs - Cross - Through Hole - Female

Knobs - Cross - Through Hole - Female


Click for combined categories: All Cross Knobs

Click for combined categories: All Knobs


Couplings Other

Hide Pictures

Go to Top  


Couplings - Cross Joint - High Speed

Couplings - Cross Joint - High Speed

0.3 to 6 N.m. 15000 to 42000 rpm.

Aluminium A2017 Hubs. Stainless Steel SUS304 Spacers. Hardened Steel Bearing Pins. Abrasion Resistant Polyamide Bush. SCM435 Black Coated Steel Cap Screws.

Related Information:
Shafting


Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Cross Roller Tables - Aluminium

Linear Slides - Cross Roller Tables - Aluminium

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Linear Slides - Cross Roller Tables - Steel

Linear Slides - Cross Roller Tables - Steel

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Slides - Linear - Cross Roller Rail

Slides - Linear - Cross Roller Rail

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.

Click for combined categories: All Linear Slides


Linear Slide Assemblies - Cross Roller

Linear Slide Assemblies - Cross Roller

Higher load capacity than precision ball slide assemblies. High cycling rates. Tolerant of shock and overhanging loads.

Accuracy of 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm. Not as naturally cleaning as ball slides. A good choice for environments protected from dust, and when heavy loads are a consideration. Positive stops prevent over-travel. Rollers improve capacity 8-10 times that of balls. Alternately crossed rollers handle force in any direction. Lightweight aluminium carriage and base. Interchangeable with many types of ball slides. Four tapped carriage holes and two counter bored base holes simplify installation and component mounting.

Click for combined categories: All Linear Slide Assemblies


Cross Blocks

Hide Pictures

Go to Top  


Joints - Swivel - Miniature - Steel

Joints - Swivel - Miniature - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Knob Style - Steel

Joints - Swivel - Knob Style - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Split Type - Steel

Joints - Swivel - Split Type - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Tee Handle - Steel

Joints - Swivel - Tee Handle - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Wing Knob - Steel

Joints - Swivel - Wing Knob - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Bases

Hide Pictures

Go to Top  


Kits - Robotic Bases

Kits - Robotic Bases

Robotic bases include chassis, wheels, motors, gearboxes and hardware. Build your own robot.


Cross Blocks

Hide Pictures

Go to Top  


Joints - Swivel - Double Wing Knob - Steel

Joints - Swivel - Double Wing Knob - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Knob Style - Stainless Steel

Joints - Swivel - Knob Style - Stainless Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Wing Knob - Stainless Steel

Joints - Swivel - Wing Knob - Stainless Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Balls

Hide Pictures

Go to Top  


Balls - Rubber - Santoprene 87A

Balls - Rubber - Santoprene 87A

A high performance thermoplastic created by cross linking EPDM rubber with Polypropylene. As an elastomer plastic it is flexible, light weight, and has very good abrasion resistance. It also has good resistance to many acids, bases and aqueous solutions.

It holds up well in both extreme hot and cold environments which can make it preferred over rubber. Common uses include; grips, knobs, handles, gaskets, and ball check valves. Specific Gravity .96 g/cc. Hardness, Shore 87A. Tensile Strength 2550 psi. Melting Point 400 F. Rohs Compliant and FDA compliant. This grade is slightly softer than the 40D grade. Colour Beige.

Click for combined categories: All Rubber Balls

Click for combined categories: All Non Metallic Balls

Related Information:
Other Types of Balls


Adjusters

Hide Pictures

Go to Top  


Adjusters - Rigid

Adjusters - Rigid

Adjustable supports for all kinds of machinery.

Mild steel bright zinc plated. Screwdriver cross recess in base. Use as mounting feet.

Click for combined categories: All Mounting Feet


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Plastic with Brass Inserts - Ondrives

Universal Joints - Plastic with Brass Inserts - Ondrives

Cross Piece and Inserts: Brass CZ121 Chromate and passivate finish. Body - Black Acetal. Max Speed: 1000 Rpm. Temp. Range: -20 oC to +60 Deg C. Backlash Free up to 1000,000,000 Turns.

Click for combined categories: All Universal Joints


Linear Slides

Hide Pictures

Go to Top  


Posi Drive Stage - Crossed Roller

Posi Drive Stage - Crossed Roller

Compact economical Posi Drive Stages take the work out of designing linear motion control systems.

These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.

Click for combined categories: All Posi-Drive Stages


Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Bushings Spherical

Hide Pictures

Go to Top  


Bushings - Spherical - Steel

Bushings - Spherical - Steel

Steel

Compensates for axial loads and misalignment.

Click for combined categories: All Spherical Bushings


Bushings - Spherical - Steel - With Oil Hole

Bushings - Spherical - Steel - With Oil Hole

Steel

Compensates for axial loads and misalignment.

Click for combined categories: All Spherical Bushings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - 4 Point Contact

Bearings - Ball - 4 Point Contact

4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Couplings Other

Hide Pictures

Go to Top  


Couplings - Torque Tube

Couplings - Torque Tube

Internal compression spring preloads the ends against axial movement and backlash. Up to 2.8 Nm. Up to 2000 rpm.

Maximum Torque: 2.8 N.m (25 lb.in). Delrin Torque Tube. Aluminium Split Hubs. Do not compress the unit axially during installation. Speeds to 2000 rpm. One piece assembly.

Related Information:
Shafting


Catches

Hide Pictures

Go to Top  


Catches - Side Mount - With Microswitch - Grabber -tm-

Catches - Side Mount - With Microswitch - Grabber -tm-

Mounts inside your enclosure. Installs either right or left side by inverting. Use 4 gauge screws or 1/8in (3.125mm) rivets to install.

Switch is designed to operate as an indicator light or form part of a non-safety related logic circuit.

Belts Flat

Hide Pictures

Go to Top  


Belts - Flat

Belts - Flat

Working Tension 2.3 to 27.5 N. Length Tolerance +/- 0.5%. Breaking Strength 1108 N. 1 Ply Polyester Woven Cord, Black Neoprene Coating. Maximum Belt Speed: 5000 mtrs / min (20000 feet / min).

Related Information:
Timing Belts

Flat Belt Idler Pulley


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Standard - Steel

Collars - Shaft - Standard - Steel

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Telescoping - Shrouded

Universal Joints - Telescoping - Shrouded

Accomodates up to 6.35mm (1/4 inch) of axial motion. Zero backlash. 440 stainless steel. Ends and flanges are 300 grade stainless steel. Max angle 40o at 1800rpm. Max speed 4000rpm.


Click for combined categories: All Universal Joints


Universal Joints - Telescoping - Unshrouded

Universal Joints - Telescoping - Unshrouded

Accomodates up to 6.35mm (1/4 inch) of axial motion. Zero backlash. 303 stainless steel with 440 stainless balls. Max angle 60o at 4000rpm. Max speed 10000rpm.


Click for combined categories: All Universal Joints


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Standard - Stainless Steel

Collars - Shaft - Standard - Stainless Steel

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Click for combined categories: All Shaft Collars

Click for combined categories: All Standard Shaft Collars


Sealing Plugs

Hide Pictures

Go to Top  


Sealing Plugs - Stainless

Sealing Plugs - Stainless

The sealing plug is a safe, quick, leakproof and low cost method for sealing cross-drilled holes. It ensures peak performance with a comfortable safety margin even in extreme applications.

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.

Couplings Other

Hide Pictures

Go to Top  


Couplings - Crowned Tooth Gear - Hubs Only

Couplings - Crowned Tooth Gear - Hubs Only

Match with sleeves from the sleeves category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:
Shafting


Couplings - Crowned Tooth Gear - Sleeve Only

Couplings - Crowned Tooth Gear - Sleeve Only

Match with hubs from the hubs category

+/- 1.02 mm Axial Displacement. 0.41mm Parallel offset per hub. 1o Angular Displacement. Free axial movement. 19.55 to 88 Nm. 8500 to 14000 rpm. High torque / low inertia.

Related Information:
Shafting


Bushings Spherical

Hide Pictures

Go to Top  


Bushings - Spherical - Plastic

Bushings - Spherical - Plastic

Ball Material W300. Housing Iglidur G. Maintenance Free. Self lubricating. Compensates for axial loads and misalignment. Corrosion resistant. High vibration dampening capacity.

Click for combined categories: All Spherical Bushings


Lazy Susans

Hide Pictures

Go to Top  


Lazy Susan Bearings

Lazy Susan Bearings

One unit construction for maximum stability and quiet running. Used to make light weight turntables.

Centre opening allows for a centre post if required.

Couplings Other

Hide Pictures

Go to Top  


Couplings - Double Disk - Aluminium

Couplings - Double Disk - Aluminium

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:
Shafting


Cable

Hide Pictures

Go to Top  


Cable - Miniature - Coated

Cable - Miniature - Coated

Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)

Recommended that nylon coating is stripped prior to swaging. Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum.

Click for combined categories: All Cable


Cable - Miniature - Uncoated

Cable - Miniature - Uncoated

Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)

Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum.

Click for combined categories: All Cable


Latches

Hide Pictures

Go to Top  


Latches - Knob Handle

Latches - Knob Handle

Black powder coated die cast zinc. Maximum working load 66kg. Average ultimate load 150kg.


Hoist Rings

Hide Pictures

Go to Top  


Rings - Hoist - Stationary - Without Screws

Rings - Hoist - Stationary - Without Screws

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Rings - Hoist - Stationary - With Screws

Rings - Hoist - Stationary - With Screws

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Clevis Joints

Hide Pictures

Go to Top  


Joints - Clevis - Plastic

Joints - Clevis - Plastic

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.

Click for combined categories: All Clevis Joints


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Helical - Long Series

Couplings - Helical - Long Series

2.9 to 31.4 Nm.

5o max angular misalignment. 0.762 mm Parallel offset. +/- 0.254 mm Axial motion. Zero backlash.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings - Helical - Low Inertia

Couplings - Helical - Low Inertia

0.8 to 13.2 Nm.

5o max angular misalignment. 0.254 mm Parallel offset. +/- 0.203 mm Axial motion. Zero backlash.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Short Series - Step Down - 303 Stainless Steel

Universal Joints - Short Series - Step Down - 303 Stainless Steel

Maximum angle of 30 Degrees


Click for combined categories: All Universal Joints


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Helical - Precision

Couplings - Helical - Precision

0.14 to 9 Nm. 25000 max RPM.

5o max angular misalignment. 0.076 mm Parallel offset. Zero Axial motion. Zero backlash.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Hinged - Stainless Steel

Collars - Shaft - Hinged - Stainless Steel

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Hinged - Steel

Collars - Shaft - Hinged - Steel

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Gearmotors Basic

Hide Pictures

Go to Top  


Gearmotors - Basic - Hobby - 12.1mm Diameter

Gearmotors - Basic - Hobby - 12.1mm Diameter

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.

Click for combined categories: All Basic Gearmotors


Protective Packing and Sleeves

Hide Pictures

Go to Top  


Sleeving - Mesh

Sleeving - Mesh

Low cost protection for exterior threaded and cylindrical parts

Elastic snug tight fit on straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).

Mounts Wedge

Hide Pictures

Go to Top  


Mounts - Wedge - Heavy Duty

Mounts - Wedge - Heavy Duty

For installation and precise leveling of heavy industrial machinery.

Three machined wedges are mounted and held together by a horizontal adjusting bolt. A lock screw ensures the mount in the leveled position. Keys in the sliding surface of the wedges ensure rigidity within the mount construction. A special opening allows for bolting of the machine to the floor. Maximum leveling is 6.35mm.

Click for combined categories: All Wedge Mounts


Cranks and Wheels

Hide Pictures

Go to Top  


Cranks - Handwheel - Spoked

Cranks - Handwheel - Spoked

Pressed steel with RAL 9005 black epoxy resin coating. Hub: Welded with H9 tolerance plain hole (Type B) or through square H11 tolerance hole (Type V). Axial and radial runout lower than IT 12.

Click for combined categories: All Cranks


Linear Slides

Hide Pictures

Go to Top  


Linear Slide Assemblies - Ball - Pre-Loaded - Compliant

Linear Slide Assemblies - Ball - Pre-Loaded - Compliant

Pre-loaded ball slides provide an acceptable level of accuracy of 0.001mm per mm for most linear motion applications. Considerably lower cost than crossed roller slides.

Uses a conventional hardened steel rod raceway and balls. Incorporates an elastomer spine and shock absorbing backup gib. Provides even and continuous preload, whilst minimising the effects of impact and shock. Tolerant to contamination and can operate of millions of cycles without lubrication. 8-32 UNC mounting holes.

Click for combined categories: All Linear Slide Assemblies


Linear Slide Assemblies - Ball - Pre-Loaded - Hard Gib

Linear Slide Assemblies - Ball - Pre-Loaded - Hard Gib

Pre-loaded ball slides provide an acceptable level of accuracy of 0.001mm per mm for most linear motion applications. Considerably lower cost than crossed roller slides.

Hard gib preload. Tolerant to contamination and can operate of millions of cycles without lubrication. 8-32 UNC mounting holes.

Click for combined categories: All Linear Slide Assemblies


Lifting Chain

Hide Pictures

Go to Top  


Master Links - Chain - Accoloy - Kuplex - Oblong

Master Links - Chain - Accoloy - Kuplex - Oblong

Approved for lifting. Use for assembling slings to allow maximum safe spread of sling legs without bending.


Click for combined categories: All Master Links


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Plastic

Washers - Disc Spring - Plastic

Also known as belleville washers.

Not for constant spring forces or when high forces are needed. Provides flat spring characteristics and compensates for axial clearances and tolerances. Vibration dampening and noise reduction. Electrical and thermal insulation. Non magnetic - Polysorb(R) material.

Click for combined categories: All Disc Springs


Gearmotors DC Permanent Magnet

Hide Pictures

Go to Top  


Gearmotors - DC PM - Size 70x114

Gearmotors - DC PM - Size 70x114

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.

Click for combined categories: All DC Permanent Magnet Gearmotors


Gearbox Parts

Hide Pictures

Go to Top  


P30-60 Ondrives Parts

P30-60 Ondrives Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

P30-60 Rino Parts

P30-60 Rino Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Fishing Reel Parts

Hide Pictures

Go to Top  


440 - 454 - 541 - 545 Pro Gear Parts

440 - 454 - 541 - 545 Pro Gear Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Clamps

Hide Pictures

Go to Top  


Clamps - Gear - Screw Type

Clamps - Gear - Screw Type

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Clamps - Gear - Split

Clamps - Gear - Split

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Clamps - Gear - Two Piece - Commercial Balanced

Clamps - Gear - Two Piece - Commercial Balanced

Commercial - Stainless - Aluminium - Carbon Steel - For our clamp type gears.

Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. These clamps are designed to clamp the OD of the hub on our clamp type gears. The shaft size listed is for reference only.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Clamps - Gear - Two Piece - Precision Balanced

Clamps - Gear - Two Piece - Precision Balanced

Precision - Stainless - Aluminium - Carbon Steel - For our clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. These clamps are designed to clamp the OD of the hub on our clamp type gears. The shaft size listed is for reference only.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155121 products in 3615 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.