Clevis Joints - Small Parts And Bearings Categories


Clevis Joints

Hide Pictures

Go to Top  


Joints - Clevis - Stainless Steel

Joints - Clevis - Stainless Steel

Stainless 1.4305. Stainless Steel Clevis assembly supplied complete with stainless pin. See also yokes.

Click for combined categories: All Clevis Joints

Related Information:
Clevis pins


Joints - Clevis - Plastic

Joints - Clevis - Plastic

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.

Click for combined categories: All Clevis Joints


Joints - Clevis - Spring Clips

Joints - Clevis - Spring Clips

Made from 9SMn steel.

Steel 9 SMn 28K (550-700 N/mm2). See also yokes.

Joints - Clevis - Steel

Joints - Clevis - Steel

Made from zinc plated 9SMn steel.

Steel 9 SMn 28K (550-700 N/mm2). Zinc plate and clear passivated. Pin not included. See also yokes.

Click for combined categories: All Clevis Joints

Related Information:
Clevis pins


Yoke Ends

Hide Pictures

Go to Top  


Yoke Ends - Threaded

Yoke Ends - Threaded

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Click for combined categories: All Yoke Ends

Related Information:
Other Clevis Joints

Other Clevis Pins


Yoke Ends - Blank

Yoke Ends - Blank

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Click for combined categories: All Yoke Ends

Related Information:
Other Clevis Joints

Other Clevis Pins


Ball Joints

Hide Pictures

Go to Top  


Joints - Ball and Socket - In line - Light Duty

Joints - Ball and Socket - In line - Light Duty

Light duty ball joints provide a pivot point. They are unhardened and should not be used for high load or high repetition applications. Clearance is not specified, so actual joints may range from very loose to reasonably tight.


Click for combined categories: All Ball Joints


Joints - Ball and Socket - Right Angle - Light Duty

Joints - Ball and Socket - Right Angle - Light Duty

Light duty ball joints provide a pivot point. They are unhardened and should not be used for high load or high repetition applications. Clearance is not specified, so actual joints may range from very loose to reasonably tight.

Steel Type: Zinc Passivated Induction Hardened. Stainless Steel Type: 303 Grade unhardened. Max. Static push/pull loads are valid for both radial and axial loads. Standard Steel type Ball Stud Tensile strength: Rm = 600 N/mm sq (Not applicable to stainless type). Standard Steel type Housing Tensile strength: Rm = 500 N/mm sq (Not applicable to stainless type).

Click for combined categories: All Ball Joints


Joints - Ball Positioner

Joints - Ball Positioner

For holding parts at an angle

Pivots 45 Deg from horizontal in every direction. Tightens at any position by rotating the collar. Has a tapped hole at the top and a male thread at the bottom for securing.

Click for combined categories: All Ball Joints


Tee Joints

Hide Pictures

Go to Top  


Joints - Tee - Tubing and Rod

Joints - Tee - Tubing and Rod

Inexpensive nylon joiners for hobby tubing and rod


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Telescoping - Spline Type - Stainless Steel

Universal Joints - Telescoping - Spline Type - Stainless Steel

Heat Resistant & Corrosion Resistant. MATERIAL: Joints - 303 Stainless Steel; Spline - 416 Stainless Steel. Max. Working Angle - 60 Deg. Pin Joints.

Click for combined categories: All Universal Joints


Cross Blocks

Hide Pictures

Go to Top  


Joints - Swivel - Double Wing Knob - Steel

Joints - Swivel - Double Wing Knob - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Knob Style - Stainless Steel

Joints - Swivel - Knob Style - Stainless Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Knob Style - Steel

Joints - Swivel - Knob Style - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Miniature - Steel

Joints - Swivel - Miniature - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Split Type - Steel

Joints - Swivel - Split Type - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Tee Handle - Steel

Joints - Swivel - Tee Handle - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Wing Knob - Stainless Steel

Joints - Swivel - Wing Knob - Stainless Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Joints - Swivel - Wing Knob - Steel

Joints - Swivel - Wing Knob - Steel

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.


Click for combined categories: All Swivel Joints

Click for combined categories: All Swivel Joints and Cross Blocks


Pins - Clevis

Hide Pictures

Go to Top  


Pins - Clevis - Adjustable

Pins - Clevis - Adjustable

Multihole clevis pins for quick and easy adjustments

Made from 1010, 1018 or 1022 steel.

Click for combined categories: All Clevis Pins

Related Information:
Large Yokes

Cotter Pins


Pins - Clevis - Handle - Bent

Pins - Clevis - Handle - Bent

Also known as Hitch Pins. Heat treated.

Bent at a 15o angle.

Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Handle - Straight - Plain

Pins - Clevis - Handle - Straight - Plain

Also known as Hitch Pins. Heat treated.


Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Handle - Straight - Powder Coated

Pins - Clevis - Handle - Straight - Powder Coated

Also known as Hitch Pins. Heat treated.


Click for combined categories: All Heat Treated Clevis Pins

Click for combined categories: All Clevis Pins


Pins - Clevis - Plain

Pins - Clevis - Plain

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Threaded yokes to suit


Pins - Clevis - Self Locking

Pins - Clevis - Self Locking

No need for cotter pins. Inexpensive ball lock pin type.

Self locking and reusable with a spring loaded ball lock. Plated steel with stainless steel ball.

Click for combined categories: All Ball Lock Pins

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Pins - Clevis - Stainless Steel 304

Pins - Clevis - Stainless Steel 304

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Pins - Clevis - Stainless Steel 316

Pins - Clevis - Stainless Steel 316

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Pins - Clevis - Zinc Plated

Pins - Clevis - Zinc Plated

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings

Click for combined categories: All Clevis Pins

Related Information:
Large yokes

Cotter Pins


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Inverted Design

Universal Joints - Inverted Design

The flange in the 40o models is just a design characteristic to prevent these joints from being overloaded beyond their 40o intended limit.

Click for combined categories: All Universal Joints


Universal Joints - Plastic

Universal Joints - Plastic

Acetal with or without steel inserts.


Click for combined categories: All Universal Joints


Universal Joints - Plastic with Brass Inserts - Ondrives

Universal Joints - Plastic with Brass Inserts - Ondrives

Cross Piece and Inserts: Brass CZ121 Chromate and passivate finish. Body - Black Acetal. Max Speed: 1000 Rpm. Temp. Range: -20 Deg C to +60 Deg C. Backlash Free up to 1000,000,000 Turns.

Click for combined categories: All Universal Joints


Universal Joints - Steel

Universal Joints - Steel

Steel - Cast Zinc - Stainless Steel.


Click for combined categories: All Universal Joints

Related Information:
Torque / Speed HU Series Only

Covers For Uni Joints


Universal Joints - Telescoping - Moulded

Universal Joints - Telescoping - Moulded


Click for combined categories: All Universal Joints


Universal Joints - Telescoping - Shrouded

Universal Joints - Telescoping - Shrouded

Accomodates up to 6.35mm (1/4 inch) of axial motion. Zero backlash. 440 stainless steel. Ends and flanges are 300 grade stainless steel. Max angle 40o at 1800rpm. Max speed 4000rpm.


Click for combined categories: All Universal Joints


Universal Joints - Telescoping - Unshrouded

Universal Joints - Telescoping - Unshrouded

Accomodates up to 6.35mm (1/4 inch) of axial motion. Zero backlash. 303 stainless steel with 440 stainless balls. Max angle 60o at 4000rpm. Max speed 10000rpm.


Click for combined categories: All Universal Joints


Universal Joint Covers

Hide Pictures

Go to Top  


Covers - Universal Joint - Elasticate Rubber

Covers - Universal Joint - Elasticate Rubber

For Single and Double Universal Joints.

-27 Deg C to 70 Deg C temp range (constant). -32 Deg C to 120 Deg C temp range (intermittent).

Click for combined categories: All Universal Joint Covers

Related Information:
Universal Joints


Hooks

Hide Pictures

Go to Top  


Hooks - Chain - Clevis Grab

Hooks - Chain - Clevis Grab

Not for lifting. For use with grade 70 transport chain or grade 43 high test. Deep narrow hook for engaging between chain links for secure holding.

Bright zinc finish.

Click for combined categories: All Non Lifting Hooks


Couplings Other

Hide Pictures

Go to Top  


Couplings - Cross Joint - High Speed

Couplings - Cross Joint - High Speed

0.3 to 6 N.m. 15000 to 42000 rpm.

Aluminium A2017 Hubs. Stainless Steel SUS304 Spacers. Hardened Steel Bearing Pins. Abrasion Resistant Polyamide Bush. SCM435 Black Coated Steel Cap Screws.

Related Information:
Shafting


Latches

Hide Pictures

Go to Top  


Latches - Panel Fastener - Butt Joint

Latches - Panel Fastener - Butt Joint

Progressively draws panels together. Helps provide airtight or water tight seal. Adjustability for manufacturing tolerances and gasket shrinkages. Receptacle needs to be purchased separately.

Uses 8mm hex to actuate. Bright chromate dipped, zinc plated carbon steel. Ultimate tensile load 625kg. Ultimate shear load 890kg.

Hooks

Hide Pictures

Go to Top  


Hooks - Grab - Kuplex II - Clevis Type

Hooks - Grab - Kuplex II - Clevis Type

Approved for lifting. Provides a chain to grab hook connection method that completely eliminates mechanical connection devices.

Red colour.

Click for combined categories: All Lifting Hooks


Hooks - Sling - Kuplex II - Clevis Type

Hooks - Sling - Kuplex II - Clevis Type

Approved for lifting. Engineered to make rapit high integrity chain to hook connections.

No bulky connection link required. Drop forged. Rated at grade 80. Red colour.

Click for combined categories: All Lifting Hooks


Shock Absorbers

Hide Pictures

Go to Top  


Shock Absorbers - Full Threaded - Clevis Mounts

Shock Absorbers - Full Threaded - Clevis Mounts


Click for combined categories: All Shock Absorbers


Latches

Hide Pictures

Go to Top  


Latches - Draw - Adjustable Style

Latches - Draw - Adjustable Style

Base, clevis, pivot nut and keeper are glass reinforced black nylon. Cover and retainer are black acetal. Adjustment nut is passivated stainless steel.

Max working load 155kg. Average ultimate load 220 kg. Keeper included.

Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - Studded - Quick Disconnect - Female

Rod Ends - Steel - Studded - Quick Disconnect - Female

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.

Click for combined categories: All Female Rod Ends with Stud


Rod Ends - Steel - Nylon Raceway - Female

Rod Ends - Steel - Nylon Raceway - Female

Also known as Heim Joints


Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Nylon Raceway - Male

Rod Ends - Steel - Nylon Raceway - Male

Also known as Heim Joints


Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Stainless Steel - Nylon Raceway - Female

Rod Ends - Stainless Steel - Nylon Raceway - Female

Also known as Heim Joints


Click for combined categories: All Female Rod Ends

Click for combined categories: All Stainless Steel Female Rod Ends


Rod Ends - Stainless Steel - Nylon Raceway - Male

Rod Ends - Stainless Steel - Nylon Raceway - Male

Also known as Heim Joints


Click for combined categories: All Male Rod Ends

Click for combined categories: All Stainless Steel Male Rod Ends


Rod Ends - Steel - Bronze Lined - Female

Rod Ends - Steel - Bronze Lined - Female

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - Bronze Lined - Male

Rod Ends - Steel - Bronze Lined - Male

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Rod Ends - Plastic - Female

Rod Ends - Plastic - Female

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends


Rod Ends - Plastic - Male

Rod Ends - Plastic - Male

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Flange Locking Type

Washers - Disc Spring - Flange Locking Type

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Rod Ends

Hide Pictures

Go to Top  


Rod Ends - Steel - Stamped - Female

Rod Ends - Steel - Stamped - Female

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - PTFE Lined - Female

Rod Ends - Steel - PTFE Lined - Female

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Female Rod Ends

Click for combined categories: All Steel Female Rod Ends


Rod Ends - Steel - PTFE Lined - Male

Rod Ends - Steel - PTFE Lined - Male

Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.

Click for combined categories: All Male Rod Ends

Click for combined categories: All Steel Male Rod Ends


Assortments

Hide Pictures

Go to Top  


Assortment Kits - Various

Assortment Kits - Various

Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins


Dubro Accessories

Hide Pictures

Go to Top  


Dubro Accessories Listed by Description

Dubro Accessories Listed by Description

Accessories for model airplanes and other hobbies.

Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.


Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155385 products in 3606 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.