Quick Delivery Items: Clamps - Categories


Clamps

Hide Pictures

Go to Top  


Clamp Kits - Timing Belt

Clamp Kits - Timing Belt

Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Clamps - Gearhead Attaching

Clamps - Gearhead Attaching


Clamps - Gear - Screw Type

Clamps - Gear - Screw Type

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Clamps - Gear - Split

Clamps - Gear - Split

Commercial - Precision - Stainless - Aluminium - Carbon Steel - For clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. ID Tolerances - Refer to table.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Clamps - Gear - Two Piece - Commercial Balanced

Clamps - Gear - Two Piece - Commercial Balanced

Commercial - Stainless - Aluminium - Carbon Steel - For our clamp type gears.

Commercial Type : Height and Clearance Radii Tolerances +/- 0.794. Commercial Type : All other dimensional tolerances except ID +/-0.254. These clamps are designed to clamp the OD of the hub on our clamp type gears. The shaft size listed is for reference only.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Clamps - Gear - Two Piece - Precision Balanced

Clamps - Gear - Two Piece - Precision Balanced

Precision - Stainless - Aluminium - Carbon Steel - For our clamp type gears.

Precision Type : Height and Clearance Radii Tolerances +/- 0.397. Precision Type : All other dimensional tolerances except ID +/-0.127. These clamps are designed to clamp the OD of the hub on our clamp type gears. The shaft size listed is for reference only.

Click for combined categories: All Gear Clamps

Related Information:
Shaft Clamps


Clamps - Syncro - Locking

Clamps - Syncro - Locking


Click for combined categories: All Syncro Clamps


Clamps - Syncro - L-Shaped

Clamps - Syncro - L-Shaped


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Adjustable

Clamps - Syncro - Mounting - Adjustable


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Sintered

Clamps - Syncro - Mounting - Sintered

Sintered Stainless Steel 316. Screw Treat Per MIL-S-5002, Clamp as cast and tumbled. Insert - Nylon Type 1 per MIL-M20693, Natural Colour.

Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 1

Clamps - Syncro - Mounting - Type 1


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 2

Clamps - Syncro - Mounting - Type 2


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 3

Clamps - Syncro - Mounting - Type 3


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 4

Clamps - Syncro - Mounting - Type 4


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 5

Clamps - Syncro - Mounting - Type 5


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 6

Clamps - Syncro - Mounting - Type 6


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 7

Clamps - Syncro - Mounting - Type 7


Click for combined categories: All Syncro Clamps


Clamps - Syncro - Mounting - Type 8

Clamps - Syncro - Mounting - Type 8


Click for combined categories: All Syncro Clamps


Levers

Hide Pictures

Go to Top  


Levers - Clamp

Levers - Clamp

Steel Parts: Quality class 5.8. Handle: Diecast zinc to DIN 1743 or Glass fibre reinforced plastic with toothed wheel in diecast zinc. Surface Finish: Handle plastic coated. Steel parts black oxide finish.

Click for combined categories: All Levers


Levers - Clamp - Quick Release

Levers - Clamp - Quick Release

Handles: Die-cast zinc or plastic. Internal thread: mechanism made from carbon steel. The thru-hole clamping lever allows for quick clamping on long thread lengths.

Click for combined categories: All Levers


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Clamp Type - One Piece - Aluminium

Collars - Shaft - Clamp Type - One Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Stainless Steel

Collars - Shaft - Clamp Type - One Piece - Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - One Piece - Steel

Collars - Shaft - Clamp Type - One Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 303 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel

Collars - Shaft - Clamp Type - Two Piece - 304 Stainless Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Aluminium

Collars - Shaft - Clamp Type - Two Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Steel

Collars - Shaft - Clamp Type - Two Piece - Steel


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Collars - Threaded - Clamp Type - Stainless Steel

Collars - Threaded - Clamp Type - Stainless Steel

Offer full radial holding power without marring the shaft.


Click for combined categories: All Threaded Shaft Collars


Collars - Threaded - Clamp Type - Steel

Collars - Threaded - Clamp Type - Steel

Offer full radial holding power without marring the shaft.


Click for combined categories: All Threaded Shaft Collars


Couplings Bellows

Hide Pictures

Go to Top  


Couplings - Bellows - External Clamp and Set Screw - Brass

Couplings - Bellows - External Clamp and Set Screw - Brass

Zero Backlash - Tin Plate - Angular Misalignment up to 5o

Phosphor Bronze Bellows. Brass set screw hub one end, berrylium copper clamp hub other end. Match with precision or commercial gear clamps - see link.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings - Bellows - External Clamp - Brass

Couplings - Bellows - External Clamp - Brass

Zero Backlash - Tin Plate - Angular Misalignment up to 10o (Refer Tables)

Phosphor Bronze Bellows. Beryllium Copper Hubs. Match with precision or commercial gear clamps - see link.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings - Bellows - Hiflex - Clamp Hub

Couplings - Bellows - Hiflex - Clamp Hub

Precise adjustment - Vibration resistance - Large misalignment capability. 0.01 to 9.17 Nm. 2000 rpm. - Zero Backlash

Wide torque range. Zero cyclic speed variation during 360 Deg. Rotation. Very low torsional deflection.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings - Bellows - Integral Clamp - 316 Stainless

Couplings - Bellows - Integral Clamp - 316 Stainless

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings - Bellows - Integral Clamp - Aluminium

Couplings - Bellows - Integral Clamp - Aluminium

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Phosphor Bronze Bellows. Aluminium Hubs.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings - Bellows - Integral Clamp - Brass

Couplings - Bellows - Integral Clamp - Brass

Zero Backlash - Constant Angular Velocity - Dampens vibration and noise - Tin plate finish

Phosphor Bronze Bellows. Brass Hubs.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings - Bellows - Hiflex - Integral Clamp Hub

Couplings - Bellows - Hiflex - Integral Clamp Hub

Precise adjustment - Vibration resistance - Large misalignment capability. 0.01 to 9.17 Nm. 2000 rpm. - Zero Backlash

Wide torque range. Zero cyclic speed variation during 360 Deg. Rotation. Very low torsional deflection.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Slit Type - Plastic - Clamp Hub

Couplings - Slit Type - Plastic - Clamp Hub

Lightweight molded patented coupling can replace many stainless or aluminum slit type couplings with lost coast and improved operation.

No windup or backlash or any derating for reversing applications. To ensure tight fit between shaft and coupling, a metal screw to metal nut design is used and does not utilize threads cut into moulded piece. Operating temperature -20o to 140o Celius. Made of Engineered polymer with stainless fastners. UV reisitant. Voltage and RF isolation.

Click for combined categories: All Helical and Slit Couplings


Couplings Insert and Jaw Type

Hide Pictures

Go to Top  


Couplings - Oldham - Complete - Acetal Disk - Clamp Type

Couplings - Oldham - Complete - Acetal Disk - Clamp Type

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 oC to +60 oC. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Click for combined categories: All Insert and Jaw Type Couplings

Related Information:
Shafting


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Reli-a-flex - Long Series - Clamp Type

Couplings - Reli-a-flex - Long Series - Clamp Type

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings - Reli-a-flex - Short Series - Clamp Type

Couplings - Reli-a-flex - Short Series - Clamp Type

From compact 6mm diameter 0.15Nm Working Torque to 40mm diameter 8.3Nm Working Torque. Reli-a-flex(R).

Aluminium Alloy 7075-T6. Zero backlash, one piece construction. Maximises torsional stiffness without inducing high bearing loads. Over 50,000,000 test cycles at rated load and 80 percent offset without failure. Maintenance Free. Recommended temperature range minus 80 oC to plus 80 Deg C.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Knobs Precision

Hide Pictures

Go to Top  


Knobs - Precision - Knurled

Knobs - Precision - Knurled

Set screw and clamp types - Stainless Steel. Also known as Thumb Knobs.

303 Stainless Steel. ID Tolerance +0.013 / -0.000 mm (+0.0005 / - 0.0000 inch).

Click for combined categories: All Knurled Knobs

Click for combined categories: All Knobs


Couplings Other

Hide Pictures

Go to Top  


Couplings - Double Disk - High Torque

Couplings - Double Disk - High Torque

Zero Backlash - Clamp Locking - Medium torsional stiffness.

High torsional stiffness and high response. Zero backlash. Hub: Aluminium (A2017) Spacer: Aluminium (A2011). Pin: Stainless Steel (SUS301) Disk: Stainless Steel (SUS303). Maximum Temperature: +100oC. 2.8 to 22 Nm. 2400 to 4800 rpm. Identical clockwise & anti-clockwise rotational characteristics.

Related Information:
Shafting


Couplings Bellows

Hide Pictures

Go to Top  


Couplings - Bellows - Modular

Couplings - Bellows - Modular

Interchangeable bushings for a variety of bore sizes.

1 Coupling consists of: 2 Bushings - 2 Clamps - 1 Bellows. Choose all 5 parts from any one size group. Bushings may be interchanged within any size group.

Related Information:
Shafting


Pulleys Grooved

Hide Pictures

Go to Top  


Pulleys - U Groove - Steel

Pulleys - U Groove - Steel

303 Stainless Steel. Groove has 1.57 mm Radius - 1.57mm Deep. 2 hub types - Pin Hub for use with Set Screws - Clamp Hub for use with Gear Clamps. Use with O-Rings or Rounthane Belts.

Click for combined categories: All U Groove Bearings and Pulleys

Related Information:
Rounthane Belts


Clamping Bushings

Hide Pictures

Go to Top  


Bushings - Taperlock

Bushings - Taperlock


Clamping Rings

Hide Pictures

Go to Top  


Rings - Split - Stainless Steel

Rings - Split - Stainless Steel

316 stainless steel wire rings.


Click for combined categories: All Split Rings


Spiral Rings - External - Heavy Duty

Spiral Rings - External - Heavy Duty

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.

Click for combined categories: All Spiral Rings


Spiral Rings - External - Medium Duty

Spiral Rings - External - Medium Duty

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.

Click for combined categories: All Spiral Rings


Spiral Rings - Internal - Medium Duty

Spiral Rings - Internal - Medium Duty

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.

Click for combined categories: All Spiral Rings


Clutches

Hide Pictures

Go to Top  


Clutches - Slip - Inline - Precision

Clutches - Slip - Inline - Precision

Adjustable to 3600 g.cm (50 oz.in) by advancing jam nut and using second jam nut to lock. Adjustment with 7/8 open end wrench (not supplied). Pin and Clamp type hubs.

Click for combined categories: All Slip Clutches


Shaft Extenders and Reducers

Hide Pictures

Go to Top  


Reducers - Bore

Reducers - Bore

Inch to Metric / Inch to Inch / Metric to Metric.

S = Recommended set screw positions. C = Recommended position for single set screw fastening. T = Recommended position for tangential screw in clamp hub.

Clamping Rings

Hide Pictures

Go to Top  


Spiral Rings - Internal - Medium/Heavy Duty

Spiral Rings - Internal - Medium/Heavy Duty

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.

Click for combined categories: All Spiral Rings


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Hinged - Stainless Steel

Collars - Shaft - Hinged - Stainless Steel

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Collars - Shaft - Hinged - Steel

Collars - Shaft - Hinged - Steel

Precision machined. Convenient easy-to-assemble design. Steel 12L14 (9SMn Pb36)

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Click for combined categories: All Shaft Collars

Click for combined categories: All Hinged Shaft Collars


Shafting Precision Ground

Hide Pictures

Go to Top  


Supports - Flanged Four Bolt

Supports - Flanged Four Bolt

For linear shafting.

Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Supports - Flanged Two Bolt

Supports - Flanged Two Bolt

For linear shafting.

Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Supports - Pedestal Two Bolt

Supports - Pedestal Two Bolt

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Handles

Hide Pictures

Go to Top  


Handles - Adjustable - Stud

Handles - Adjustable - Stud

Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space.

Shaftloc

Hide Pictures

Go to Top  


Shaftloc-tm Sleeves - Single Ended

Shaftloc-tm Sleeves - Single Ended

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Click for combined categories: All Shaftloc


Washers Aligning

Hide Pictures

Go to Top  


Washers - Self Aligning - Sets - Hardened Steel

Washers - Self Aligning - Sets - Hardened Steel

Spherical Seat Washers

Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.

Click for combined categories: All Thrust Washers

Click for combined categories: All Aligning Washers



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155123 products in 3615 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.