FOUND IN CROSS REFERENCE:- The item was found in our cross reference database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here
Possible cross references (other brands) part number matches for CERAMIC
B15-R8C-TH9/C3CERAMICHYBRID (BOCA) matches MR28.57515-CSN-T9H-C3 found in Bearings - Ball - Single Row - Radial - Unflanged
ID (d): 15.000. OD (D): 28.575. Width (B): 6.350.
B17-86C-TH9/C3CERAMICHYBRID (BOCA) matches MR3217-CSN-T9H-C3 found in Bearings - Ball - Single Row - Radial - Unflanged
ID (d): 17.000. OD (D): 32.000. Width (B): 7.000.
D6000/602-847CERAMICHYBRID (GRW) matches D6000-FC-MC5-gr7 found in Bearings - Model Jet Turbine
ID (d): 10.000. OD (D): 26.000. Width (B): 8.000.
D608/602602-ACERAMICHYBRID (GRW) matches D608-PK-MC5-gr7 found in Bearings - Model Jet Turbine
ID (d): 8.000. OD (D): 22.000. Width (B): 7.000.
DR13A2L-801MPBW/CERAMICBALL (Kavo) matches SFR144-CSN-D28 found in Bearings - Ball - Single Row - Radial - Flanged - High Precision
ID (d): 3.175. OD (D): 6.350. Width (B): 2.381.
DR55B1L-SR144-Z-CERAMICHYB (Kavo) matches SR144A-CSN-ZS-MC3gr5 found in Bearings - Ball - Single Row - Radial - Unflanged - High Precision
ID (d): 3.175. OD (D): 6.350. Width (B): 2.779.
DR55T1L-SR144-ZZ-CERAMICHYB (Kavo) matches SR144A-CSN-ZZSMC3gr5 found in Bearings - Ball - Single Row - Radial - Unflanged - High Precision
ID (d): 3.175. OD (D): 6.350. Width (B): 2.779.
MR16001C-TH9/C3CERAMICHYBRID (BOCA) matches 6001B-CSN-T9H-C3 found in Bearings - Ball - Single Row - Radial - Unflanged
ID (d): 12.000. OD (D): 28.000. Width (B): 7.000.
MR16002C-TH9/C3CERAMICHYBRID (BOCA) matches 6002A-CSN-T9H-C3 found in Bearings - Ball - Single Row - Radial - Unflanged
ID (d): 15.000. OD (D): 32.000. Width (B): 8.000.
MR16002C-THB/C3CERAMICHYBRID (BOCA) matches 6002A-CSN-KC-C3 found in Bearings - Ball - Single Row - Radial - Unflanged
ID (d): 15.000. OD (D): 32.000. Width (B): 8.000.
Categories for: ceramic
Balls - Ceramic - Silicon Nitride
Outstanding wear resistance. Good thermal and chemical resistance.
High hardness. High strength over a wide temperature range. High fracture toughness. Outstanding wear resistance. Good thermal and chemical resistance.
Outstanding wear resistance. Excellent thermal and chemical resistance.
Low cost, light weight, high energy material
Non conductive hard brittle material. Performs best at temperatures below 249 Deg C. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.
Low cost, light weight, high energy material
Non conductive hard brittle material. Performs best at temperatures below 249 Deg C. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.
Steel Races with Si3N4 Ceramic Balls
Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily.
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02.
Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls, cage and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage.
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed.
Excellent performance in electrical and magnetism sensitive applications. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls, cage and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage.
Housings - Linear - Pillow Block - Closed - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants.
Bearings - Linear - Ball - Ceramic Coated
Approved for direct food contact in applications where animal fat or food approved lubricants are present.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling.
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Specific Gravity: 3.98.
Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.
Tolerances available on request. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).
Bearings - Linear - Plastic - Closed
Operating temp -50 Deg to 90 Deg Celius
Features include - Self lubricating, Corrosion and dirt resistant, Lightweight, Maintenance free, Vibration dampening and Can be secured by a retaining ring (not included). Can be used with aluminum shafting, stainless steel, ceramic, case-hardened steel and chrome plated steel if hardness is below HRC50 and finish is 8-16 RMS.
|
| |||||||||||||||||||||||||
| Select all items starting with... | |||||||||||||||||||||||||
| A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | Or use the category search | ||||||||||||||||
|
| |||||||||||||||||||||||||
Store - Categories Pages
Store Pages
Main Pages on Small Parts and Bearings Website
Site Summary:
Freight Rates Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery. Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue. Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved. |