All Items: Cable Ties - Categories


Cable Ties

Hide Pictures

Go to Top  


Ties - Cable - Standard

Ties - Cable - Standard

Cable ties small to large. Light to heavy duty.


Click for combined categories: All Cable Ties


Ties - Cable - With Mounting Holes

Ties - Cable - With Mounting Holes

Cable ties with screw mounting holes.


Click for combined categories: All Cable Ties


Velcro - One Wrap Straps

Velcro - One Wrap Straps

Each roll contains 10 snap off straps. Simply wrap the strap around cable, cord, fibre optics or other objects then press the tip against itself for a secure closure.

10 Straps per roll.

Velcro - One Wrap Tape

Velcro - One Wrap Tape

One wrap tape is a single tape with hooks on one side and loops on the other. Used for quick flexible secure and reusable cable management.


Rope and Cable

Hide Pictures

Go to Top  


Attachments - Eyes - Synchromesh

Attachments - Eyes - Synchromesh

Recommended dimensions after crimping:. 1.05 Cable - A=2.59. 2.06 Cable - A=2.64. 2.60 Cable - A=2.72. 3.40 Cable - A=2.80 (3.40 Cable must have outer helical wire removed prior to crimping).

Click for combined categories: All Synchromesh Attachments

Related Information:
cable


Cable

Hide Pictures

Go to Top  


Cable - Miniature - Coated

Cable - Miniature - Coated

Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)

Recommended that nylon coating is stripped prior to swaging. Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum.

Click for combined categories: All Cable


Cable - Miniature - Uncoated

Cable - Miniature - Uncoated

Lengths will be supplied continuous to a maximum of 3mtrs (ie, 10 x 300mm supplied as 3mtr length)

Sold per length. Multiple quantities will be supplied in a continuous length up to 3mtr maximum.

Click for combined categories: All Cable


Cable - Synchromesh

Cable - Synchromesh

Pitch Error +/-0.050 mm. Cumulative Pitch Error +/-4.070 mm max. over 100 pitches. Temperature Range = -30 Deg. Celcius to +80 Deg. Celcius. Avoid strong acids, alkalies and organic solvents.

Related Information:
Cable Attachments


Rope and Cable

Hide Pictures

Go to Top  


Attachments - Ball Plugs

Attachments - Ball Plugs

F and L dimensions are obtained after swaging. Before swaging the fitting is round.

Click for combined categories: All Cable Attachments


Attachments - Loop Sleeves

Attachments - Loop Sleeves


Click for combined categories: All Cable Attachments

Related Information:
Cable


Attachments - Stop Sleeves

Attachments - Stop Sleeves


Click for combined categories: All Cable Attachments


Attachments - Threaded Plugs

Attachments - Threaded Plugs

F and L dimensions are obtained after swaging. Before swaging the fitting is round.

Click for combined categories: All Cable Attachments


Attachments - Wire Rope Clips - Carbon Steel

Attachments - Wire Rope Clips - Carbon Steel

Hot galvanised carbon steel

Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.

Click for combined categories: All Cable Attachments


Attachments - Wire Rope Clips - Stainless Steel

Attachments - Wire Rope Clips - Stainless Steel

304 Stainless Steel

Furnished with hex nuts. Meet USA Fed. Spec. FF-C-450c, Type I, Class 1.

Click for combined categories: All Cable Attachments


Attachments - Thimbles - Carbon Steel

Attachments - Thimbles - Carbon Steel

Hot galvanised carbon steel

Meets USA Fed. Spec. FF-T-276b for Type III thimbles.

Click for combined categories: All Cable Attachments


Attachments - Thimbles - Stainless Steel

Attachments - Thimbles - Stainless Steel

316 Stainless Steel. Use with synchromesh cable or standard miniature cable

Thimbles provide loop support at higher loads and protect cables from wear when motion is present. Some thimbles may have open or uneven ends.

Click for combined categories: All Cable Attachments

Click for combined categories: All Synchromesh Attachments

Related Information:
Cable


Spring Reels

Hide Pictures

Go to Top  


Reels - Spring Powered - Bracket Mounted

Reels - Spring Powered - Bracket Mounted

Applications: Counterbalances, door closers, cable retractors. Applications: Hose retreivers, tool head returns, cabinets and furniture.

Click for combined categories: All Reels


Snaps

Hide Pictures

Go to Top  


Snaps - Spring - Interlocking - Style 1

Snaps - Spring - Interlocking - Style 1

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.


Click for combined categories: All Snaps


Snaps - Spring - Interlocking - Style 2

Snaps - Spring - Interlocking - Style 2

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.


Click for combined categories: All Snaps


Snaps - Spring - Interlocking - Style 3

Snaps - Spring - Interlocking - Style 3

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.


Click for combined categories: All Snaps


Spring Reels

Hide Pictures

Go to Top  


Reels - Spring Powered - Base Mounted - Steel

Reels - Spring Powered - Base Mounted - Steel

Used in counterbalances, door closers, cable retractors, hose retreivers, tool head returns, cabinets and furniture.

Click for combined categories: All Reels


Reels - Spring Powered - Base Mounted - Plastic Case

Reels - Spring Powered - Base Mounted - Plastic Case

Used in counterbalances, door closers, cable retractors, hose retreivers, tool head returns, cabinets and furniture.

Click for combined categories: All Reels


Tools Crimping

Hide Pictures

Go to Top  


Tools - Crimping

Tools - Crimping

For crimping loop sleeves, plugs and eyes used with miniature cable.

Used for synchromesh and miniature cables.

Click for combined categories: All Tools


Spring Reels

Hide Pictures

Go to Top  


Reels - Spring Powered - Arbor Mounted

Reels - Spring Powered - Arbor Mounted

Mounting studs sold seperately.

Used in counterbalances, door closers, cable retractors, hose retreivers, tool head returns, cabinets and furniture. Mounting studs sold seperately.

Click for combined categories: All Reels

Related Information:
Arbor Mounting Stud


Plungers Ball

Hide Pictures

Go to Top  


Plungers - Ball - Threaded - With Limit Switch

Plungers - Ball - Threaded - With Limit Switch

Supply Cable : Grey Two Phase for normally open contacts, black for normally closed. Temp (Body): -40 oC to 170 deg C Temp (Cable): -10 deg C to 50 deg C. Electrical Supply : 20 mA DC / 50 mA DC. Voltage : 24V Supply Cable 2.8mm - 2 Phase. Safety Standard : IP40 Average Switch Life Span : 56 Switching.

Click for combined categories: All Threaded Ball Plungers


Seals and Sealing

Hide Pictures

Go to Top  


Grommets - Rubber - EPDM

Grommets - Rubber - EPDM

EPDM Rubber Grommets

50 +/-5 Durometer. Easy to install. Good Vibration and Shock Control. Protects Wire, Cable and Hoses.

Click for combined categories: All Grommets - Rubber


Grommets - Rubber - Natural

Grommets - Rubber - Natural

Natural Rubber Grommets

50 +/-5 Durometer. Easy to Install. Good Vibration and Shock Controll. Protects Wire, Cable and Hoses.

Click for combined categories: All Grommets - Rubber


Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Coupling Ends - Open - Mild Steel

Shafts - Flexible - Coupling Ends - Open - Mild Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Shafts - Flexible - Coupling Ends - Open - Stainless Steel

Flexible shafting with coupling ends ready to attach to a fixed shaft. 303 Stainless Steel.

1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm.

Click for combined categories: All Flexible Shaft

Related Information:
Remote Control Nomenclature


Dubro Accessories

Hide Pictures

Go to Top  


Dubro Accessories Listed by Description

Dubro Accessories Listed by Description

Accessories for model airplanes and other hobbies.

Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.

Flexible Shaft

Hide Pictures

Go to Top  


Shafts - Flexible - Masterflex - Size 13 - High Duty

Shafts - Flexible - Masterflex - Size 13 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 13 - Standard Duty

Shafts - Flexible - Masterflex - Size 13 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 12.7mm encased in 25mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 15mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 16 - High Duty

Shafts - Flexible - Masterflex - Size 16 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 16mm encased in 32mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 16mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size 16 - Standard Duty

Shafts - Flexible - Masterflex - Size 16 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 16mm encased in 32mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 16mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  4 - High Duty

Shafts - Flexible - Masterflex - Size 4 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  4 - Standard Duty

Shafts - Flexible - Masterflex - Size 4 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 3.8mm encased in 10.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 4mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  5 - High Duty

Shafts - Flexible - Masterflex - Size 5 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  5 - Standard Duty

Shafts - Flexible - Masterflex - Size 5 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 4.75mm encased in 14mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 5mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  6 - High Duty

Shafts - Flexible - Masterflex - Size 6 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  6 - Standard Duty

Shafts - Flexible - Masterflex - Size 6 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 6.35mm encased in 17mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 6mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - High Duty

Shafts - Flexible - Masterflex - Size 8 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  8 - Standard Duty

Shafts - Flexible - Masterflex - Size 8 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 8mm encased in 17.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 8mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - High Duty

Shafts - Flexible - Masterflex - Size 9 - High Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. High duty with sintered bushes.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Shafts - Flexible - Masterflex - Size  9 - Standard Duty

Shafts - Flexible - Masterflex - Size 9 - Standard Duty

Fully encased flexible couplings with either bored ends or panel mounting end nuts. Standard Duty with ball bearings.

Torsional deflection ino is listed for 0.1Nm load at 1m length. Cable diameter 9.52mm encased in 22.5mm diameter plastic cover. Choose from clockwise only, anti-clockwise only or bi-directional. 10mm coupling bore. Panel nuts are 4mm wide.

Click for combined categories: All Flexible Shaft


Hooks

Hide Pictures

Go to Top  


Tie Down - Load Hugger - Components

Tie Down - Load Hugger - Components

Secure loads and protect them against damage from shifting while in transit.


Click for combined categories: All Load Hugger Tie Downs


Tie Down - Load Hugger - Ratchet Assemblies

Tie Down - Load Hugger - Ratchet Assemblies

Secure loads and protect them against damage from shifting while in transit.


Click for combined categories: All Load Hugger Tie Downs


Tie Down - Load Hugger - Winch Straps

Tie Down - Load Hugger - Winch Straps

Secure loads and protect them against damage from shifting while in transit.


Click for combined categories: All Load Hugger Tie Downs


Tie Downs - D-Ring - Forged with Bolt-on Bracket

Tie Downs - D-Ring - Forged with Bolt-on Bracket

C-1045 steel with bolt-on mounting bracket


Click for combined categories: All D Ring Tie Downs


Tie Downs - D-Ring - Forged with Weld-on Bracket

Tie Downs - D-Ring - Forged with Weld-on Bracket

C-1045 steel with weld-on mounting bracket


Click for combined categories: All D Ring Tie Downs


Tie Downs - D-Ring - Plated Steel

Tie Downs - D-Ring - Plated Steel

Zinc plated steel with 6.35mm mounting holes. Ultimate load 660 kg.


Click for combined categories: All D Ring Tie Downs


Tie Downs - Lifting Grapple

Tie Downs - Lifting Grapple

Use as a lifting grapple or tie down. A continuous welded bail and and a heavy duty stainless return spring allows for heavy duty lifting.

180o swing. Zinc plated steel.

Tie Downs - Recessed

Tie Downs - Recessed

Works as a grapple or lifting ring with 90o stop. Mounts into a 79x87mm rectangular opening.

Zinc plated steel.

Tie Downs - Round - With Spacer

Tie Downs - Round - With Spacer

Zinc plated steel with plastic spacer. Ultimate load 530kg.


Games Amusement

Hide Pictures

Go to Top  


Games - Putties - Slimes - Clays

Games - Putties - Slimes - Clays

Glow in the dark, bouncy, coloured slimes and bouncy clay


Click for combined categories: All Games and Gadgets


Lifting Chain

Hide Pictures

Go to Top  


Chain - Grade 70 - Transport

Chain - Grade 70 - Transport

For load binding applications, tie-downs, towing and logging. Not for lifting.

Strength to lb ratio exceed that of Proof Coil and High Test. Meets US department of transport regulations. High strength heat treated steel with a peer finish.

Click for combined categories: All Link Chain


Bearings Pivot

Hide Pictures

Go to Top  


Bearings - Pivot - With Inner Ring

Bearings - Pivot - With Inner Ring

Note! Minimum quantities apply to production of these items.

Click for combined categories: All Pivot Bearings


Bearings - Pivot - Without Inner Ring

Bearings - Pivot - Without Inner Ring

Note! Minimum quantities apply to production of these items.

Click for combined categories: All Pivot Bearings


Bearings Scale

Hide Pictures

Go to Top  


Bearings - Precision Scale

Bearings - Precision Scale

Bearings for scales.

Note! Minimum quantities apply to production of these items.

Latches

Hide Pictures

Go to Top  


Latches - Tension - Versa Latch - Steel

Latches - Tension - Versa Latch - Steel

Torsion springs compensate for application irregularities. Easy to grasp handle design. Zinc plated carbon steel with bright chromate dip.

Keepers sold separately - see linked category.

Hoist Rings

Hide Pictures

Go to Top  


Rings - Hoist - Stationary - Without Screws

Rings - Hoist - Stationary - Without Screws

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Rings - Hoist - Stationary - With Screws

Rings - Hoist - Stationary - With Screws

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Click for combined categories: All Hoist Rings


Latches

Hide Pictures

Go to Top  


Latches - Tension - Versa Latch - 300 Grade Stainless Steel

Latches - Tension - Versa Latch - 300 Grade Stainless Steel

Torsion springs compensate for application irregularities. Easy to grasp handle design. Passivated type 300 grade stainless steel.

Keepers sold separately - see linked category.

Bungs

Hide Pictures

Go to Top  


Bungs - Rectangular

Bungs - Rectangular

Plastic bungs fit inside rectangular tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Click for combined categories: All Bungs

Related Information:
Square Bungs


Bungs - Round

Bungs - Round

Plastic bungs fit inside round tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Click for combined categories: All Bungs

Related Information:
Round Bungs


Bungs - Square

Bungs - Square

Plastic bungs fit inside square tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Click for combined categories: All Bungs

Related Information:
Square Bungs


Tips

Hide Pictures

Go to Top  


Tips - Round

Tips - Round

Plastic tips fit over outside of tubing.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.

Clips

Hide Pictures

Go to Top  


C Clips

C Clips

Variation of an E-Clip with an open face.

Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.

Screws Button Head

Hide Pictures

Go to Top  


Screws - Button - Socket - Aluminium

Screws - Button - Socket - Aluminium

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.

Click for combined categories: All Socket Button Screws

Related Information:
Hex Keys

Allen Key Screwdrivers


Screws Cap Head

Hide Pictures

Go to Top  


Screws - Cap - Socket - Aluminium

Screws - Cap - Socket - Aluminium

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.

Click for combined categories: All Socket Cap Screws

Related Information:
Hex Keys

Allen Key Screwdrivers


Books

Hide Pictures

Go to Top  


Books - Hobby - Mousetrap Vehicles

Books - Hobby - Mousetrap Vehicles

Tips and tricks and how-to guides for Mousetrap powered cars and boats

Activities guide and plans.

Click for combined categories: All Books


Hooks

Hide Pictures

Go to Top  


Slings - Wire Rope - Permaloc®

Slings - Wire Rope - Permaloc®

For general purpose lifting in environments too rugged for synthetic slings. Tuff-Tag identification on every sling for capacity ratings.


Balls

Hide Pictures

Go to Top  


Balls - Stainless Steel - 316L Grade

Balls - Stainless Steel - 316L Grade

Easier to machine than standard 316 grade.

316L Stainless Steel has the same properties as 316, except that it has a lower carbon content. It is also easier to machine. Non-magnetic. Resistant to severe corrosive conditions. Hardness: Rockwell C: 25-39. Specific Gravity: 7.972.

Click for combined categories: All Metallic Balls

Related Information:
Other Types of Balls


Snaps

Hide Pictures

Go to Top  


Snaps - Steel Wire - Bit

Snaps - Steel Wire - Bit

Zinc Plated


Snaps - Steel Wire - Bodies

Snaps - Steel Wire - Bodies

Nickel Plated


Snaps - Steel Wire - Open Swivel

Snaps - Steel Wire - Open Swivel

Zinc Plated


Snaps - Steel Wire - Swivel Eye

Snaps - Steel Wire - Swivel Eye

Nickel Plated


Pins - Wirelock

Hide Pictures

Go to Top  


Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Pins - Wire Lock Lynch - Double Wire - Round - 304 Stainless Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel

Pins - Wire Lock Lynch - Double Wire - Round - Mild Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Double Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Round - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Square - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel

Pins - Wire Lock Lynch - Single Wire - Trapezoid - Carbon Steel

Also known as snapper pins


Click for combined categories: All Wire Lock Lynch Pins


Pinion Wire Imperial

Hide Pictures

Go to Top  


Gears - Pinion Wire - 24 Diametrical Pitch

Gears - Pinion Wire - 24 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Gears - Pinion Wire - 32 Diametrical Pitch

Gears - Pinion Wire - 32 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Gears - Pinion Wire - 48 Diametrical Pitch

Gears - Pinion Wire - 48 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Gears - Pinion Wire - 64 Diametrical Pitch

Gears - Pinion Wire - 64 Diametrical Pitch

Brass and carbon steel.

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Imperial Pinion Wire


Pinion Wire Metric

Hide Pictures

Go to Top  


Gears - Pinion Wire - Module 0.4

Gears - Pinion Wire - Module 0.4

Brass

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Metric Pinion Wire


Gears - Pinion Wire - Module 0.5

Gears - Pinion Wire - Module 0.5

Brass

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Metric Pinion Wire


Gears - Pinion Wire - Module 0.8

Gears - Pinion Wire - Module 0.8

Brass

Metallic. Please note that very thin pinion wire may not be supplied perfectly straight. Pinion wire is meant to be cut into much smaller pieces to make pinion gears so the slight bends in the long length will have no effect on the intended use.

Click for combined categories: All Metric Pinion Wire


Hooks

Hide Pictures

Go to Top  


Hooks - Rope Rings - Recessed

Hooks - Rope Rings - Recessed

Zinc plated


Spring Wire

Hide Pictures

Go to Top  


Wire - 302 Stainless

Wire - 302 Stainless

302 Stainless Steel


Click for combined categories: All Spring Wire


Wire - Brass

Wire - Brass

Brass

Shipped in straight lengths on wood backing board.

Click for combined categories: All Spring Wire


Wire - Steel - Spring - Music - Coils

Wire - Steel - Spring - Music - Coils

SAE 1090 Spring Steel.


Click for combined categories: All Spring Wire


Wire - Steel - Spring - Music Wire - Short Lengths

Wire - Steel - Spring - Music Wire - Short Lengths

SAE 1090 Spring Steel.

Shipped in straight lengths on wood backing board.

Click for combined categories: All Spring Wire


Couplings Other

Hide Pictures

Go to Top  


Couplings - Miniflex - Nickel Plated Spring Wire Type

Couplings - Miniflex - Nickel Plated Spring Wire Type


Couplings - Miniflex - Stainless Steel Flat Wire Type

Couplings - Miniflex - Stainless Steel Flat Wire Type

Light metal hubs and stainless steel wire. Up to 120 Deg C.


Springs Compression

Hide Pictures

Go to Top  


Springs - Compression - Long Lengths - Music Wire

Springs - Compression - Long Lengths - Music Wire

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Click for combined categories: All Compression Springs


Springs Extension

Hide Pictures

Go to Top  


Springs - Extension - Music Wire

Springs - Extension - Music Wire

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Click for combined categories: All Extension Springs


Tools Bending

Hide Pictures

Go to Top  


Tools - Wire Working

Tools - Wire Working

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.

Click for combined categories: All Tools



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154795 products in 3682 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.