Brakes - Small Parts And Bearings Categories


Brakes

Hide Pictures

Go to Top  


Brakes - Flange Mounted - Power On - SDP

Brakes - Flange Mounted - Power On - SDP

Anti backlash when energised - zero drag when de-energised.

24 V DC.

Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Backlash (Enaged) Friction Types : 5 Min Max. Backlash (Enaged) Crown Tooth Types : 10 Min Max.

Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Backlash (Enaged) : 5 Min Max. Power Consumption at 24 V DC : 3.7 watts.

Brakes - Magnetic - Particle

Brakes - Magnetic - Particle

Zero Backlash - Low Inertia - No Friction Surface.

24 V DC. Shaft becomes coupled to housing with electrical excitation. Torque is proportional to the DC input current.

Sensor - Ultrasonic - For Brakes

Sensor - Ultrasonic - For Brakes

For maintaining constant tension when using a brake for producing unwind tension.

Also used when using a clutch for rewind tension. When target is within range the LED Status Indicator glows continuously. Uses Power Supply S90MPS-24 (See category - Power Supplies). Sensor measures diameter of the roll and sends a 0-10V DC signal to power supply. Torque is automatically varied as roll size changes to keep constant tension.

Limit Stops - Electromagnetic

Limit Stops - Electromagnetic

Adjustable Limits.

Material: Cast aluminium, black anodised. Shaft: Stainless Steel. Ball bearings used throughout. Four miniature single pole double throw switches. Two adjusting screws to permit easy accurate adjustment of the miniature switch actuators.

Castors

Hide Pictures

Go to Top  


Castors - Brakes Only

Castors - Brakes Only


Click for combined categories: All Castors


Clutches

Hide Pictures

Go to Top  


Clutch Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Clutch Brakes - Magnetic - Bu-Ord Size 11 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 18g.cm (0.25 oz.in). Breakaway Torque (De-energised) at 24-28 V DC : 7.2g.cm (0.10 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.4g.cm sq (0.041 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.1g.cm sq (0.028 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Clutch Brakes - Magnetic - Bu-Ord Size 18

Clutch Brakes - Magnetic - Bu-Ord Size 18

Breakaway Torque (Energised) at 24-28 V DC : 14.4g.cm (0.20 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 2.2g.cm (0.03 oz.in). Shafts A & B coupled when energised, B shaft braked when de-energised. Inertia (Energised) at 24-28 VDC : 5.11g.cm sq (0.071 oz.in sq). Inertia (Energised) at 24-28 VDC : 7.56g.cm sq (0.105 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Clutch Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Clutch Brakes - Magnetic - Bu-Ord Size 18 - Reverse Acting

Breakaway Torque (Energised) at 24-28 V DC : 3.6g.cm (0.05 oz.in). Breakaway Torque (De-Energised) at 24-28 V DC : 14.4g.cm (0.2 oz.in). Shafts A & B coupled when de-energised, braked when energised. Inertia (De-Energised) at 24-28 VDC : 7.27g.cm sq (0.101 oz.in sq). Inertia (Energised) at 24-28 VDC : 5.11g.cm sq (0.071 oz.in sq).

Click for combined categories: All Magnetic Clutch Brakes


Castors

Hide Pictures

Go to Top  


Castors - Plate - Institutional - Swivel - With Brake

Castors - Plate - Institutional - Swivel - With Brake


Click for combined categories: All Plated Castors

Click for combined categories: All Swivel Plated Castors


Castors - Plate - General Purpose - Swivel with Brake

Castors - Plate - General Purpose - Swivel with Brake


Click for combined categories: All Castors


Castors - Plate - With Ball Bearings - Swivel with Brake

Castors - Plate - With Ball Bearings - Swivel with Brake


Click for combined categories: All Castors


Measuring Equipment

Hide Pictures

Go to Top  


Potentiometer - Follower Arm

Potentiometer - Follower Arm

Maintain constant tension when using a brake for producing unwind tension or a clutch for rewind tension.

use with power supply S90MPS-24MCF (See category - Power Supplies).

Clutches

Hide Pictures

Go to Top  


Clutch Assemblies - Slip - Precision

Clutch Assemblies - Slip - Precision

Adjustable Torque range 360-3600 g.cm (5-50 oz.in).

303 Stainless Steel. Brake : Oil Impregnated Bronze. Use with hubless gears with 9.525 bore and 3.175 face width.

Click for combined categories: All Clutch Assemblies


Clutch Assemblies - Slip - Standard

Clutch Assemblies - Slip - Standard

Adjustable Torque range 360-3600 g.cm (5-50 oz.in).

Adjustable Torque. 303 Stainless Steel with Cork Brake Material. Use with hubless gears with 9.525 bore and 3.175 face width.

Click for combined categories: All Clutch Assemblies


Ball Transfers

Hide Pictures

Go to Top  


Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated

Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated

For conveying materials.

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

Click for combined categories: All Ball Castors and Transfers

Click for combined categories: All Flange Mount Ball Transfers


Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated

Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated

For conveying materials.

Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.

Click for combined categories: All Ball Castors and Transfers

Click for combined categories: All Push Fit Ball Transfers


O-Rings

Hide Pictures

Go to Top  


O-Rings - Nitrile Rubber

O-Rings - Nitrile Rubber

General purpose.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Click for combined categories: All O-Rings


Linear Slides

Hide Pictures

Go to Top  


Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155385 products in 3606 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.