Bearings For Housings - Small Parts And Bearings Categories

FOUND IN PART NUMBERS:- The item was found in our part numbers database. The results of this search are shown below. If you would prefer to run the search again without checking the part numbers database please Click Here

Possible part number matches for
Matching Part

608-T9H-ZRUgr5-SKATE16PACK found in Skate Bearings
Use: For aggressive skating. Description: Polyamide Cage for Extended Life. Size in mm: PACK OF 16 (8 x 22 x 7).

Stock: 2


Matching Part

608-ZZMC5-L23-SKATE found in Skate Bearings
Use: For high speed. Description: Free running bearings will spin very freely but wear quicker. Size in mm: SINGLE BEARING (8 x 22 x 7).

Stock: 110


Matching Part

608-2RS-SKATE found in Skate Bearings
Use: For general skating. Description: For dirty conditions. Size in mm: SINGLE BEARING (8 x 22 x 7).

Backorder


Matching Part

608-2RS-SKATE-PK10 found in Skate Bearings
Use: For general skating. Description: For dirty conditions. Size in mm: PACK OF 10 (8 x 22 x 7).

Backorder


Matching Part

608-2RS-SKATE-PK8 found in Skate Bearings
Use: For general skating. Description: For dirty conditions. Size in mm: PACK OF 8 (8 x 22 x 7).

Backorder


Matching Part

608-CSN-T9H-2RS-SKATE found in Skate Bearings
Use: For aggressive skating. Description: Ceramic Balls - Polyamide Cage - Sealed - Excellent Durability. Size in mm: SINGLE BEARING (8 x 22 x 7).

Backorder


Matching Part

608-ZZMC5-L23-SKATE-PK10 found in Skate Bearings
Use: For high speed. Description: Free running bearings will spin very freely but wear quicker. Size in mm: PACK OF 10 (8 x 22 x 7).

Backorder


Matching Part

608-ZZMC5-L23-SKATE-PK8 found in Skate Bearings
Use: For high speed. Description: Free running bearings will spin very freely but wear quicker. Size in mm: PACK OF 8 (8 x 22 x 7).

Backorder


Matching Part

608-ZZS-SKATE found in Skate Bearings
Use: For general skating. Description: With removable shields. Size in mm: SINGLE BEARING (8 x 22 x 7).

Backorder


Matching Part

608-ZZS-SKATE-PK10 found in Skate Bearings
Use: For general skating. Description: With removable shields. Size in mm: PACK OF 10 (8 x 22 x 7).

Backorder



Bearings for Housings

Hide Pictures

Go to Top  


Bearings - 316 Stainless Steel - For Plastic Housings

Bearings - 316 Stainless Steel - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - Acetal - Solid - For Plastic Housings

Bearings - Acetal - Solid - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - Acetal with Stainless Balls - For Plastic Housings

Bearings - Acetal with Stainless Balls - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - For Cast Iron Housings

Bearings - For Cast Iron Housings

Insert bearings with spherical OD for use with cast iron flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request. Lubrication Hole to match Lubrication groove in housing.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Bearings - For Pressed Metal Housings

Bearings - For Pressed Metal Housings

Insert bearings with spherical OD for use with pressed metal flanged and pillow block housings.

Grub Screw locking. Preferred misallignment of no more than 2o, but can accommodate up to 6o. Also available with eccentric locking collars on request.

Related Information:
Three Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Square - Miniature

Housings - Bearing - Square - Miniature

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Plastic

Housings - Bearing - Pillow Block - Plastic

Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Bearings for Plastic Housings


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Die Cast

Housings - Bearing - Pillow Block - Die Cast

Zinc Die Cast Housings with or without Sintered Bronze Bearings.

Lubricable. With or without standard sintered bronze bearings.

Click for combined categories: All Housings with Integral Bearing


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - Plastic

Housings - Bearing - Flanged - Square - Plastic

Use with steel, plastic or stainless steel bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:
Other Bearings to Suit


Bearings Housings

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Miniature

Housings - Bearing - Pillow Block - Miniature

Aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Miniature - Self Aligning

Housings - Bearing - Flanged - Miniature - Self Aligning

Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pedestal - Miniature - Self Aligning

Housings - Bearing - Pedestal - Miniature - Self Aligning

Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.

Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing

Housings - Bearing - Pillow Block - Nylon with Ertalyte Bearing

Flanged Ertalyte Bearing in Moulded Nylon 101 Housing.

Self-Lubricating. High Performance. Electrically Insulating.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Nylon with Stainless Bearing

Housings - Bearing - Pillow Block - Nylon with Stainless Bearing

Moulded Nylon 101 Housing with 440C Stainless Bearing.

Bearing block: Nylon / Bearing: 440C Stainless / Insert: 52100 Chrome Steel. High Performance. Housing is Electrically Insulating. Not intended for precision applications. Inner assembly not fixed in place. Can be used as a floating assembly or fixed using conventional adhesives or circlips.

Click for combined categories: All Housings with Integral Bearing


Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Single Assembly

Housings - Bearing - Single Assembly

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - W300

Housings - Bearing - Flanged - Square - W300

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 Deg C to +180 Deg C.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Flanged - 2 Bolt Hole - W300

Housings - Bearing - Flanged - 2 Bolt Hole - W300

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Bronze Bearing

Housings - Bearing - Pillow Block - Bronze Bearing

Aluminium with 5 percent self aligning sintered bronze bearing.

Bearing: Bronze SAE 840 (oil impregnated). / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. The performance of a plain bearing is stated as a PV value, which is the product of a pressure and velocity.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Tapped Base Unit - Stainless

Housings - Bearing - Tapped Base Unit - Stainless

Full stainless steel bearing units are the best solution for hostile chemical washdown applications. All metal bearing insert components are a combination of 302, 304 and 440 stainless steel. Seals are silicone rubber. Grease is H-1 food grade.

Operating temperature minus 20 deg C to +120 deg C. Solid 304 stainless housings have a machined base and extremely smooth surface finish, essential for demanding washdown installations. These housings do not experience flaking, cracking or discolouration and are virtually unaffected by scrapes. Bearings are removable. Food grade.

Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Double Assembly - Circlip Retained

Housings - Bearing - Double Assembly - Circlip Retained

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings - Bearing - Single Assembly - Circlip Retained

Housings - Bearing - Single Assembly - Circlip Retained

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - PTFE Bronze Bearing

Housings - Bearing - Pillow Block - PTFE Bronze Bearing

Aluminium with 5 percent self aligning sintered bronze bearing and PTFE solid lubricant.

Bearing: Bronze PTFE impregnated. / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 100 HRB (Rockwell B). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance. Maximum Load and Speed: The figure shown in the plain bearing data are maximums, for guidance only, and cannot be combined. Operating temperature minus 201 to plus 282o Celsius (minus 330 to plus 540o Farenheit).

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - Pillow Block - Needle Roller Bearing

Housings - Bearing - Pillow Block - Needle Roller Bearing

Aluminium with 5 percent self aligning drawn cup needle roller bearing.

Bearing: Drawn cup needle roller. / Housing: Sintered Aluminium / Corrosion Resistant. Mating shaft recommendation: Min. hardening 58 HRC (Rockwell C). Max surface finish 16 RMS. Recommended shaft clearance is 0.013 - 0.038mm, using lower limit of bore tolerance.

Click for combined categories: All Housings with Integral Bearing


Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food Grade.

Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Housings - Bearing - Tapped Base - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer a more favourable economic choice. Stainless steel bearings offer a high level of corrosion resistance and all metal parts are made from either 302, 304 or 440C stainless steel.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel. Food grade.

Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Miniature

Housings - Bearing - Flanged - Miniature

Chromic Anodised Aluminium double or single flanged housings.

For standard radial ball bearings.

Housings - Bearing - Hanger - Miniature

Housings - Bearing - Hanger - Miniature

Chromic Anodised Aluminium hanger housings.

For standard radial ball bearings.

Housings - Bearing - 2 Bolt Mounting Plates

Housings - Bearing - 2 Bolt Mounting Plates

Chromic Anodised Aluminium mounting plates.

For standard radial ball bearings.

Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Round - Cast Iron

Housings - Bearing - Flanged - Round - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Pillow Block - Cast Iron

Housings - Bearing - Pillow Block - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Bronze Bearing

Housings - Bearing - Flanged - Bronze Bearing

5o Static Alignment.

Bearing: Bronze SAE 840 (oil impregnated). Housing: Sintered Aluminium. Bearing Retainer: Outer retainer is steel (which is clinched into Aluminium housing) with a Nylon washer on first face. Apply appropriate factor of safety to the nominal loads and speeds specified. Mating shaft rec. Min. 100 HRB. Max surface finish 16 RMS. Rec. shaft clearance 0.013 - 0.038mm.

Click for combined categories: All Housings with Integral Bearing


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Offset - Cast Iron

Housings - Bearing - Flanged - Offset - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - Square - Cast Iron

Housings - Bearing - Flanged - Square - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Pillow Block - Pressed Metal

Housings - Bearing - Pillow Block - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Housings - Bearing - Flanged - 2 Bolt Hole - Cast Iron

Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings.

Related Information:
Plastic Bearings to Suit


Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Housings - Bearing - Flanged - 2 Bolt Hole - Plastic

Load and speed capability depend on the bearing used. Use with steel or plastic bearing inserts for plastic housings.

Related Information:
Other Bearings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Thermoplastic - W300

Housings - Bearing - Pillow Block - Thermoplastic - W300

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 deg C to +130 deg C. Max. Static Tensile Strength is Long Term. Info for Short Term also available.

Click for combined categories: All Housings with Integral Bearing


Bearings and Housings Insert Type

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Housings - Bearing - Flanged - 2 Bolt Hole - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Housings - Bearing - Flanged - 3 Bolt Hole - Pressed Metal

Bearings sold separately. Use with steel bearing inserts for pressed metal housings. Larger sizes available on request.

Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Housings - Bearing - Flange Mounted - Frelon - Self Aligning

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Housings - Bearing - Pillow Block - Frelon - Precision - Open

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Housings - Bearing - Pillow Block - Frelon - Standard - Closed

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Housings - Bearing - Pillow Block - Frelon - Standard - Open

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion.

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Housings - Bearing - Pillow Block - Frelon - Precision - Closed

Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion.

Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Housings - Bearing - Pillow Block - Thermoplastic with Stainless Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Food grade. Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C. Bearings are 440C stainless steel. Bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 2 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 3 Bolt Offset - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C.

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - 4 Bolt Flange - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C.

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - Pillow Block - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer an economical alternative with good chemical and washdown resistance.

Thermoplastic housings are off-white and are made from glass reinforced PBT resin. Excellent mechanical, thermal and electrical properties. Operational temperature -20 to +100 deg C.

Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Housings - Bearing - Tapped Base - Thermoplastic with Chrome Steel Bearing

Thermoplastic housed units offer a more favourable economic choice. Hard chrome inserts offer an intermediate level of corrosion resistance.

Operating temperature minus 20 deg C to +95 deg C. Thermoplastic hosuings are offwhite and are made from glass reinforced PBT resin. Favourable chemical resistance. Very resistant to moisture absorption. Excellent mechanical, thermal and electrical properties. All sleeves, bushings and grease fittings are 300 grade stainless steel.

Bearings - Self Clinching - Miniature - Self Aligning

Bearings - Self Clinching - Miniature - Self Aligning

Pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs and simplify designs. Designed to press into a mounting plate as thin as 1.5mm.

Clinches into a plate bored to the required housing bore. Minimum plate thickness 1.6mm to no maximum. Maximum mounting hardness 100 Rockwell B. Operating temperature Minus 34 Deg C to Plus 121 Deg C. Compensates for mounting hole tolerances up to 0.07mm. 4.76 to 10mm bores. RoHS, REACH and SVHC environmental compliant.

Click for combined categories: All Housings with Integral Bearing


Bearings Mounted

Hide Pictures

Go to Top  


Bearings - Spyraflo - Self Clinching - Non Aligning

Bearings - Spyraflo - Self Clinching - Non Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Bearings - Spyraflo - Self Clinching - Self Aligning

Bearings - Spyraflo - Self Clinching - Self Aligning

Bronze, acetal and needle roller bearings in a special self-clinching housing. Refer technical sheets linked at bottom of tables.

See links at bottom of web page for more information. +/- 5% Static Alignment. See animation link at bottom of web page. Panel material no harder than RB65/RB75. Panel hole to be punched or machined to size A (+0.07/-0.00mm).

Click for combined categories: All Spyraflo Mounted Bearings

Related Information:
Case Studies and Info - Click then scroll to Spyraflo

Animation on Spyraflo Site


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Flat Race Type

Bearings - Thrust - Ball - Flat Race Type

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Grooved Race Type

Bearings - Thrust - Ball - Grooved Race Type

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Open (Type 2)

Housings - Linear - Open (Type 2)

Bearings not included.

Material: Aluminium. Adhesive may be necessary to secure bearing in housing. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. For use with open linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Thomson Super (Flanged)

Housings - Linear - Thomson Super (Flanged)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear without Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed

Housings - Linear - Pillow Block - Closed

Bearings not included.

NOTE: You may need to use adhesive to hold the bearing securely in place on the 'D' dimension. These lightweight but heavy duty Aluminium sets offer high accuracy. They consist of a corrosion resistant, highly rigid Aluminium housing. The units can be attached to any surface to offer support in any direction. For use with closed linear bearings with OD matching the housing bore dimension D.

Click for combined categories: All Linear Bearing Housings


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed - Adjustable

Housings - Linear - Pillow Block - Closed - Adjustable

Includes Bearings. Adjustable preload.

Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball BushingTM Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).

Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing


Housings - Linear - Thomson Super Smart (Flanged)

Housings - Linear - Thomson Super Smart (Flanged)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Pillow Block - Closed)

Housings - Linear - Thomson Super (Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Pillow Block - Open)

Housings - Linear - Thomson Super (Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Twin Pillow Block - Open)

Housings - Linear - Thomson Super (Twin Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Pillow Block - Closed)

Housings - Linear - Thomson Super Smart (Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Pillow Block - Open)

Housings - Linear - Thomson Super Smart (Pillow Block - Open)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super (Twin Pillow Block - Closed)

Housings - Linear - Thomson Super (Twin Pillow Block - Closed)

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Footed

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Closed) - Footed

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Footed

Housings - Linear - Thomson Super Smart (Twin Pillow Block - Open) - Footed

Includes Bearings.


Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing

Related Information:
Thomson Super Smart Loads


Bearings for Skating

Hide Pictures

Go to Top  


Skate Bearings

Skate Bearings

Bearings for use with skates and skate boards.


Bearings for Wheelbarrows

Hide Pictures

Go to Top  


Bearings - Unground

Bearings - Unground

Unground bearings used in trolleys, prams and wheel barrow wheels


Bearings One Way Clutch

Hide Pictures

Go to Top  


Bearings - One Way - Roller

Bearings - One Way - Roller

Roller Clutch Bearings rotate in one direction only.

Recommended Shaft Diameter for Clutch Bearings without Inner Ring is +0.000 / -0.005 mm.

Click for combined categories: All One Way Clutch Bearings


Bearings Scale

Hide Pictures

Go to Top  


Bearings - Precision Scale

Bearings - Precision Scale

Bearings for scales.

Note! Minimum quantities apply to production of these items.

Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Chrome Steel

Bearings - Ball - Chrome Steel

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings Turbine

Hide Pictures

Go to Top  


Bearings  - Model Jet Turbine

Bearings - Model Jet Turbine

Bearings developed specifically for use in Model Jet turbines.

These bearings are designed for high speeds usually between 80,000 and 120,000 RPM in short runs. Speeds over 120,000 are often obtainable. Testing is required. High Temperature up to 300o Celsius. Bearing Type R in the tables indicates Radial (refer our main bearings category).

Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - 440C Stainless

Bearings - Ball - 440C Stainless

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings Grooved Profile

Hide Pictures

Go to Top  


Bearings - U Groove Profile OD

Bearings - U Groove Profile OD

Special OD Bearings.

Contact us for tolerances.

Click for combined categories: All U Groove Bearings and Pulleys


Bearings - V Groove Profile OD

Bearings - V Groove Profile OD

Special OD Bearings.

Related Information:
Precision Shafting To Suit Bearings


Bearings One Way Clutch

Hide Pictures

Go to Top  


Bearings - One Way - Sprag - TFS

Bearings - One Way - Sprag - TFS

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required.

Click for combined categories: All One Way Clutch Bearings


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Banded

Bearings - Thrust - Ball - Banded

3 Piece Thrust Bearings Banded Type


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings for Dental Equipment

Hide Pictures

Go to Top  


Bearings - Dental Applications

Bearings - Dental Applications

See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.

Bearings Acetal

Hide Pictures

Go to Top  


Bearings - Acetal - Special Types

Bearings - Acetal - Special Types

Light duty acetal bearings used for drawer runners, light duty tracks and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

Click for combined categories: All Acetal Bearings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - High Speed Cage

Bearings - Ball - High Speed Cage

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for a data sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Click for combined categories: All Radial Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - WIR - Chrome Steel

Bearings - Ball - WIR - Chrome Steel

Chrome Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings Hydrodynamic

Hide Pictures

Go to Top  


Bearings - Hydrodynamic Pressure

Bearings - Hydrodynamic Pressure

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Bearings Acetal

Hide Pictures

Go to Top  


Bearings - Acetal - with Glass Balls

Bearings - Acetal - with Glass Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg C to 100 Deg C Continuous.

Click for combined categories: All Acetal Bearings

Related Information:
Acetal Bearings with 316 Stainless Steel Balls

Acetal Properties


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Economy - Chrome Steel

Bearings - Ball - Economy - Chrome Steel

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Flanged - Chrome Steel

Bearings - Ball - Flanged - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - WIR - 440C Stainless

Bearings - Ball - WIR - 440C Stainless

Stainless Steel Bearings with a Snap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Gothic Groove Profile OD

Bearings - Gothic Groove Profile OD

Bearings with a Gothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Bearings Needle Roller

Hide Pictures

Go to Top  


Bearings - Needle Roller - Inner Rings

Bearings - Needle Roller - Inner Rings

Hardened sleeves for needle roller bearings.


Bearings One Way Clutch

Hide Pictures

Go to Top  


Bearings - One Way - Sprag - Standard

Bearings - One Way - Sprag - Standard

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes. Designed for press fit installation.

Click for combined categories: All One Way Clutch Bearings


Bearings Automotive

Hide Pictures

Go to Top  


Bearings - Automotive - Trailer Wheel - Kits

Bearings - Automotive - Trailer Wheel - Kits

Front and rear wheel bearing and seal kits for popular box trailers, boat trailers and caravans


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - Economy - 440C Stainless

Bearings - Ball - Economy - 440C Stainless

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Flanged - 440C Stainless

Bearings - Ball - Flanged - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - WIR - Chrome Steel

Bearings - Ball - Flanged - WIR - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - Double Row - Angular Contact

Bearings - Ball - Double Row - Angular Contact

Double Row Ball Bearings - Angular Contact.


Click for combined categories: All Double Row Ball Bearings


Bearings - Ball - Flanged - WIR - 440C Stainless

Bearings - Ball - Flanged - WIR - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - High Precision - 440C Stainless

Bearings - Ball - High Precision - 440C Stainless

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of a precision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary:

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 151117 products in 3564 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.