Quick Delivery Items: Ball Bearings - Small Parts And Bearings Categories

FOUND IN PARTS DATABASE:- The item was found in our part numbers and descriptions database. Click Here to show the parts found.



Housings to Suit Ball Bearings

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Miniature

Housings - Bearing - Flanged - Miniature

Chromic Anodised Aluminium double or single flanged housings.

For standard radial ball bearings.

Housings - Bearing - Hanger - Miniature

Housings - Bearing - Hanger - Miniature

Chromic Anodised Aluminium hanger housings.

For standard radial ball bearings.

Housings - Bearing - Single Assembly

Housings - Bearing - Single Assembly

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with abearing fitted. Bearing adhesive may be used during assembly. Fixing using Hholes for acapscrew fixing or THD tapped hole to fasten from the opposite direction.

Housings - Bearing - Square - Miniature

Housings - Bearing - Square - Miniature

Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.

Housings - Bearing - 2 Bolt Mounting Plates

Housings - Bearing - 2 Bolt Mounting Plates

Chromic Anodised Aluminium mounting plates.

For standard radial ball bearings.

Housings - Bearing - Single Assembly - Circlip Retained

Housings - Bearing - Single Assembly - Circlip Retained

Includes bearings.

Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with bearings and circlips fitted. Bearing adhesive may be used during assembly. Fixing using Hholes for acapscrew fixing or THD tapped hole to fasten from the opposite direction.

Bearings Ball

Hide Pictures

Go to Top  


Bearings - Ball - 440C Stainless

Bearings - Ball - 440C Stainless

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - Angular Contact - Chrome Steel

Bearings - Ball - Angular Contact - Chrome Steel

Including miniature sizes down to 8mm from stock and even smaller available.

Single row angular contact ball bearings.

Click for combined categories: All Angular Contact Bearings


Bearings - Ball - Chrome Steel

Bearings - Ball - Chrome Steel

Stainless and Chrome Steel Bearings.

Standard single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome


Bearings - Ball - Double Row - Angular Contact

Bearings - Ball - Double Row - Angular Contact

Double Row Ball Bearings - Angular Contact.


Click for combined categories: All Double Row Ball Bearings


Bearings - Ball - Economy - 440C Stainless

Bearings - Ball - Economy - 440C Stainless

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Economy - Chrome Steel

Bearings - Ball - Economy - Chrome Steel

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Economy Bearings


Bearings - Ball - Flanged - 440C Stainless

Bearings - Ball - Flanged - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - Chrome Steel

Bearings - Ball - Flanged - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges. Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings


Bearings - Ball - Flanged - High Precision - 440C Stainless

Bearings - Ball - Flanged - High Precision - 440C Stainless

Stainless Steel Bearings with Flanges - Abec 5 and Abec 7.

Single row radial ball bearings with flanges. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of aprecision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - Flanged - WIR - 440C Stainless

Bearings - Ball - Flanged - WIR - 440C Stainless

Stainless Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - Flanged - WIR - Chrome Steel

Bearings - Ball - Flanged - WIR - Chrome Steel

Chrome Steel Bearings with Flanges.

Single row radial ball bearings with flanges and extended inner rings (wide inner rings). Not all Bearings are readily available. Please enquire. Miniature sizes from 1mm bore to over 50mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Flanged Ball Bearings with Extended Inner


Bearings - Ball - High Precision - 440C Stainless

Bearings - Ball - High Precision - 440C Stainless

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of aprecision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - High Precision - Chrome Steel

Bearings - Ball - High Precision - Chrome Steel

Chrome Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of aprecision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Basic Single Row Bearings Stainless and Chrome

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - High Speed Cage

Bearings - Ball - High Speed Cage

Bearings with cages for high speed applications, including phenolic, nylon and polyamide.

Bearings in this listing have various types of high speed cages. Speed ratings range from 20 percent to 80 percent increase on standard cage types. Please contact us for adata sheet on the specific size you require. Items with high speed cages have the suffixes T9H, TNH, TW or KC. This category does not include ceramic hybrid bearings with high speed cages. These are listed under Bearings - Ceramic Hybrid.

Click for combined categories: All Radial Ball Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - WIR - 440C Stainless

Bearings - Ball - WIR - 440C Stainless

Stainless Steel Bearings with aSnap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - WIR - Chrome Steel

Bearings - Ball - WIR - Chrome Steel

Chrome Steel Bearings with aSnap Ring on the OD

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - WIR - High Precision - 440C Stainless

Bearings - Ball - WIR - High Precision - 440C Stainless

Stainless Steel Bearings - Abec 5 and Abec 7.

Single row radial ball bearings with extended inner ring (wide inner ring). Not all bearings are readily available. Please enquire. True high precision bearings are not recommended for skates or fishing reels. High precision bearings are used in accurately balanced application such as spindles, gyros and medical equipment. If your application is not of aprecision nature, standard bearings may be more suitable (and less expensive).

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings

Related Information:
Skating and Fishing FAQ

Precision Shafting To Suit Bearings


Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Bearings - Ball - WIR - With Snap Ring - Chrome Steel

Chrome Steel Bearings with aSnap Ring on the OD

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Extended Inner Ring Bearings


Bearings - Ball - With Snap Ring - Chrome Steel

Bearings - Ball - With Snap Ring - Chrome Steel

Chrome Steel Bearings with aSnap Ring on the OD

Single row radial ball bearings with snap ring. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Bearings - Ball - With Snap Ring Groove Only - Chrome Steel

Chrome Steel Bearings with aSnap Ring Groove on the OD. No Snap Ring.

Single row radial ball bearings with snap ring groove. Not all bearings are readily available. Please enquire. Miniature sizes from 0.65 to over 50 mm bore.

Click for combined categories: All Radial Ball Bearings

Click for combined categories: All Bearings with Snap Ring or Groove


Bearings - Ball - 316 Stainless Steel - Single Row

Bearings - Ball - 316 Stainless Steel - Single Row

Food and Medical grade Stainless Steel - Non Hardenable.

Tolerances differ from standard bearing types - see below. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. ID +0.0762 mm / -0.000 mm OD +0.000 mm / -0.0762 mm Width +/- 0.127 mm. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races.

Click for combined categories: All 300 Grade Stainless Bearings


Bearings - Ball - 4 Point Contact

Bearings - Ball - 4 Point Contact

4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited.

Bearings - Ball - Ceramic Hybrid

Bearings - Ball - Ceramic Hybrid

Steel Races with Si3N4 Ceramic Balls

Bearings with steel races and ceramic balls. For standard bearings, the balls are usually one of the first components to show wear. Ceramic balls are harder than steel and do not wear as easily. Items with high speed cages have the suffixes T9H, TNH, TW or KC.

Click for combined categories: All Radial Ball Bearings


Bearings - Ball - Double Row - Self Aligning - Parallel Bore

Bearings - Ball - Double Row - Self Aligning - Parallel Bore


Click for combined categories: All Double Row Ball Bearings

Click for combined categories: All Self Aligning Ball Bearings


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Ball - Banded

Bearings - Thrust - Ball - Banded

3 Piece Thrust Bearings Banded Type


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Cage and Balls Only - Chrome Steel

Bearings - Thrust - Ball - Cage and Balls Only - Chrome Steel

Match with thrust washers of the same bore and OD.


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel

Bearings - Thrust - Ball - Cage and Balls Only - Stainless Steel

Match with thrust washers of the same bore and OD.


Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Flat Race Type

Bearings - Thrust - Ball - Flat Race Type

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have alarger bore on one side allowing ashaft with no steps to pass through. Others will require astepped shaft as they have the same bore on both races. Some have areduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require astepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Grooved Race Type

Bearings - Thrust - Ball - Grooved Race Type

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have alarger bore on one side allowing ashaft with no steps to pass through. Others have identical bores on each race, requiring astepped shaft. Some have areduced OD on one race allowing seating into an unstepped housing bore, whilst others will require astepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Ball - Washers Only - Chrome Steel

Bearings - Thrust - Ball - Washers Only - Chrome Steel

Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.

Stainless Steel Washers are hardened to HRC38.42. Carbon Steel Washers are hardened to RC59.61.

Click for combined categories: All Ball Thrust Bearings

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Ball - Closed

Bearings - Linear - Ball - Closed

Standard closed type to run on standard 60HRC shafts with h6 tolerances

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 Deg CIntermittent, 80 Deg Ccontinuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Miniature - Super High Precision

Bearings - Linear - Ball - Miniature - Super High Precision

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell Chardness with tolerances +0.000 / -0.006 mm.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Open

Bearings - Linear - Ball - Open

For running on shafts supported by arail along their length.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 Deg CIntermittent, 80 Deg Ccontinuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Stainless Steel - Closed

Bearings - Linear - Ball - Stainless Steel - Closed

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 Deg CIntermittent, 80 Deg Ccontinuous.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Precision Steel - Closed

Bearings - Linear - Ball - Thomson Precision Steel - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Precision Steel - Open

Bearings - Linear - Ball - Thomson Precision Steel - Open

For running on shafts supported by arail along their length.


Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Ball - Thomson Super - Closed

Bearings - Linear - Ball - Thomson Super - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super - Open

Bearings - Linear - Ball - Thomson Super - Open

For running on shafts supported by arail along their length.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super Smart - Closed

Bearings - Linear - Ball - Thomson Super Smart - Closed

For running on shafts fixed at the ends.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings - Linear - Ball - Thomson Super Smart - Open

Bearings - Linear - Ball - Thomson Super Smart - Open

For running on shafts supported by arail along their length.


Click for combined categories: All Linear Ball Bearings

Related Information:
Thomson Super Smart Loads

Precision Shafting To Suit Bearings


Bearings Acetal

Hide Pictures

Go to Top  


Bearings - Acetal - with Glass Balls

Bearings - Acetal - with Glass Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg Cto 100 Deg CContinuous.

Click for combined categories: All Plastic Bearings

Click for combined categories: All Plastic Single Row Bearings

Related Information:
Acetal Bearings with 316 Stainless Steel Balls

Acetal Properties


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Gothic Groove Profile OD

Bearings - Gothic Groove Profile OD

Bearings with aGothic Groove in OD. Round Track Rolling Applications.

Type GP : Single Row of Balls (Radial). Type DWRAGP : Double Row of Balls (Angular Contact) - Extended Inner Ring. Type DRAGP : Double Row of Balls (Angular Contact) - Flush Inner Ring.

Bearings for Housings

Hide Pictures

Go to Top  


Bearings - Acetal with Stainless Balls - For Plastic Housings

Bearings - Acetal with Stainless Balls - For Plastic Housings

Insert bearings ideal for wet conditions.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:
Four Bolt Flanged Housings to Suit

Pillow Block Housings to Suit


Ball Splines Linear

Hide Pictures

Go to Top  


Linear Ball Splines - Bearings - Unflanged

Linear Ball Splines - Bearings - Unflanged

Use with Linear Ball Spline Shaft.


Click for combined categories: All Linear Ball Splines


Bearings Hydrodynamic

Hide Pictures

Go to Top  


Bearings - Hydrodynamic Pressure

Bearings - Hydrodynamic Pressure

Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Castors

Hide Pictures

Go to Top  


Castors - Plate - With Ball Bearings - Fixed

Castors - Plate - With Ball Bearings - Fixed


Click for combined categories: All Castors


Castors - Plate - With Ball Bearings - Swivel

Castors - Plate - With Ball Bearings - Swivel


Click for combined categories: All Castors


Castors - Plate - With Ball Bearings - Swivel with Brake

Castors - Plate - With Ball Bearings - Swivel with Brake


Click for combined categories: All Castors


Springs Disc

Hide Pictures

Go to Top  


Washers - Disc Spring - Ball Bearing Type

Washers - Disc Spring - Ball Bearing Type

Specially designed for preloading ball bearings. C1075 steel.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

Click for combined categories: All Disc Springs


Hoist Rings

Hide Pictures

Go to Top  


Rings - Hoist - With Ball Bearings

Rings - Hoist - With Ball Bearings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

Click for combined categories: All Hoist Rings


Bearings Ball

Hide Pictures

Go to Top  


Bearings - Radial - Semi-Ground - Sealed

Bearings - Radial - Semi-Ground - Sealed

This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Click for combined categories: All Radial Ball Bearings


Bearings - Radial - Semi-Ground - Shielded

Bearings - Radial - Semi-Ground - Shielded

This series is precision ground on all contact surfaces except the bore. Recommended for lighter loads and maximum speed of 3000rpm. Bore tolerance is +0.127/-0.000, OD tolerance is +0.000/-0.013 and width is +0.000/-0.127


Click for combined categories: All Radial Ball Bearings


Bearings Acetal

Hide Pictures

Go to Top  


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg Cto 100 Deg CContinuous.

Click for combined categories: All Plastic Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg Cto 100 Deg CContinuous.

Click for combined categories: All Plastic Bearings

Click for combined categories: All Plastic Single Row Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 Deg Cto 100 Deg CContinuous.

Click for combined categories: All Plastic Bearings

Click for combined categories: All Plastic Single Row Bearings

Related Information:
Acetal Bearings with Glass Balls

Acetal Properties


Balls

Hide Pictures

Go to Top  


Balls - Plastic - Torlon

Balls - Plastic - Torlon

TorlonTM 4301 Bearing Grade Balls. Grade 1.

Polyamide-imide (TorlonTM) Balls. Rockwell Hardness (Method A): E86 or M109-119. Specific Gravity: 1.38. Colour: Brown Opaque.

Click for combined categories: All Plastic Balls

Click for combined categories: All Non Metallic Balls

Related Information:
Other Types of Balls


Pulleys Grooved

Hide Pictures

Go to Top  


Pulleys - UGroove - Idler - Plastic - With Ball Bearing

Pulleys - UGroove - Idler - Plastic - With Ball Bearing

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Click for combined categories: All UGroove Bearings and Pulleys

Click for combined categories: All Idler Pulleys

Related Information:
Rounthane Belts


Pulleys - UGroove - Idler - Steel - With Bearing

Pulleys - UGroove - Idler - Steel - With Bearing

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Click for combined categories: All UGroove Bearings and Pulleys

Click for combined categories: All Idler Pulleys

Related Information:
Rounthane Belts


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Thermoplastic - W300

Housings - Bearing - Pillow Block - Thermoplastic - W300

Iglide L280 / Igus W300 Ball with Thermoplatic Body.

Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 deg Cto +130 deg C. Max. Static Tensile Strength is Long Term. Info for Short Term also available.

Click for combined categories: All Housings with Integral Bearing


Gearheads Bu-Ord

Hide Pictures

Go to Top  


Gearheads - Bu-Ord Size 11

Gearheads - Bu-Ord Size 11

Ball bearings used throughout. Pat Nos 2892357 and 3396594.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size 15

Gearheads - Bu-Ord Size 15

Ball bearings used throughout. Pat No 2892357.

Click for combined categories: All Bu-Ord Gearheads


Gearheads - Bu-Ord Size 18

Gearheads - Bu-Ord Size 18

Ball bearings used throughout. Pat No 2892357.

Click for combined categories: All Bu-Ord Gearheads


Bearings Conveyor

Hide Pictures

Go to Top  


Bearings - Conveyor - Hex Bore - Plastic - Single Row

Bearings - Conveyor - Hex Bore - Plastic - Single Row

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.

Click for combined categories: All Conveyor Bearings


Ball Splines Linear

Hide Pictures

Go to Top  


Linear Ball Splines - Shaft

Linear Ball Splines - Shaft

Use with either flanged or unflanged Linear Ball Spline Bearings.


Click for combined categories: All Linear Ball Splines

Related Information:
Unflanged Bearings to Suit


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - Square - W300

Housings - Bearing - Flanged - Square - W300

With integral self aligning plain bearing.

Housing : Igumid G. Ball : Highly wear resistant Iglidur W300. Temperature range -40 Deg Cto +180 Deg C.

Click for combined categories: All Housings with Integral Bearing


Gearheads Bu-Ord

Hide Pictures

Go to Top  


Gearheads - Bu-Ord Size 18 - Heavy Duty

Gearheads - Bu-Ord Size 18 - Heavy Duty

Ball bearings used throughout.

Click for combined categories: All Bu-Ord Gearheads


Housings with Integral Bearing

Hide Pictures

Go to Top  


Housings - Bearing - Flanged - 2 Bolt Hole - W300

Housings - Bearing - Flanged - 2 Bolt Hole - W300

With integral self aligning plain bearing.

Housing: Igumid G. Ball: Highly wear resistant Iglidur W300.

Click for combined categories: All Housings with Integral Bearing


Chain and Sprockets Roller

Hide Pictures

Go to Top  


Sprockets - Idler

Sprockets - Idler

Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.

Can be used directly on shafts with asurface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.

Click for combined categories: All Sprockets for Roller Chain

Related Information:
Roller Chain (See types under R)

Idler Shafts


Pulleys Grooved

Hide Pictures

Go to Top  


Pulleys - UGroove - Idler - Plastic - With Plain Bore

Pulleys - UGroove - Idler - Plastic - With Plain Bore

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Click for combined categories: All UGroove Bearings and Pulleys

Click for combined categories: All Idler Pulleys

Related Information:
Rounthane Belts


Pulleys - UGroove - Idler - Plastic - With Sintered Bush

Pulleys - UGroove - Idler - Plastic - With Sintered Bush

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Click for combined categories: All UGroove Bearings and Pulleys

Click for combined categories: All Idler Pulleys

Related Information:
Rounthane Belts


Linear Slides

Hide Pictures

Go to Top  


Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to aslow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Front Disconnect - Lever - Full Ext

Slides - Drawer - Front Disconnect - Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting alever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Sliding - Stainless - PTFE - Closed

Bearings - Linear - Sliding - Stainless - PTFE - Closed

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 Deg Cto 190 Deg C. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Click for combined categories: All Linear Ball Bearings


Bearings - Linear - Sliding - Stainless - PTFE - Open

Bearings - Linear - Sliding - Stainless - PTFE - Open

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 Deg Cto 190 Deg C. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000.

Click for combined categories: All Linear Ball Bearings


Hooks

Hide Pictures

Go to Top  


Hooks - Lifting - Swivel and Pivot

Hooks - Lifting - Swivel and Pivot

Full swivel and 180o pivot with double ball bearings for smooth tilting, twisting and turning.

Eliminates jerking of the lifting point. Suitable for sling system including hook, eye or loop. Has non protruding hook tip and is extremely durable. Forged safety latch which engages in the top of the hook protecting against lateral bending. Coiled double leg stainless steel spring protected by latch design.

Linear Slides

Hide Pictures

Go to Top  


Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to aslow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with abracket and two plastic tracks.

Click for combined categories: All Drawer Slides


Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing adrawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with aquick disconnect.

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing adrawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).

Click for combined categories: All Drawer Slides


Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

Click for combined categories: All Drawer Slides


Bearings Thrust

Hide Pictures

Go to Top  


Bearings - Thrust - Roller - Cage and Rollers Only

Bearings - Thrust - Roller - Cage and Rollers Only

Washers and Rollers sold separately. Match cage and roller assembly with washers from the washers category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are aguide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings - Thrust - Roller - Washers

Bearings - Thrust - Roller - Washers

Washers and Rollers sold separately. Match washers with cage and roller assembly from the cage and roller assembly category.

Raceway hardness 58 HRC. Limiting Speeds are based on adequate oil lubrication. Load ratings are aguide taking into consideration ideal operating conditions. Dimensions given are nominal. Select the correct washer OD. Some washers listed here are to suit thrust ball bearings.

Click for combined categories: All Roller Thrust Cages and Washers

Related Information:
Other Thrust Bearings

Precision Shafting To Suit Bearings


Bearings Housings

Hide Pictures

Go to Top  


Housings - Bearing - Pillow Block - Miniature

Housings - Bearing - Pillow Block - Miniature

Aluminium pillow block housings mounted with 440C stainless miniature bearings

No more need for expensive engineering of housings to suit your new applications. Fully greased Japanese 440C Grade corrosion resistant stainless steel ball bearings. Double shielded bearings to minimise contamination.

Sealing Plugs

Hide Pictures

Go to Top  


Tools - Sealing Plug Installation

Tools - Sealing Plug Installation

Hand installation tools for sealing plugs

Sleeve: Stainless Steel DIN 1.4305, AISI 303. Ball: Bearing Steel, Heat Treated. Hardness: HB = 220.

Click for combined categories: All Tools


Brakes

Hide Pictures

Go to Top  


Limit Stops - Electromagnetic

Limit Stops - Electromagnetic

Adjustable Limits.

Material: Cast aluminium, black anodised. Shaft: Stainless Steel. Ball bearings used throughout. Four miniature single pole double throw switches. Two adjusting screws to permit easy accurate adjustment of the miniature switch actuators.

Tolerance

Hide Pictures

Go to Top  


Rings - Tolerance

Rings - Tolerance

Tolerance Rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.

Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium - Ceramic Coated

Shafting - Aluminium - Ceramic Coated

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting - Aluminium - Ceramic Coated - Tapped

Shafting - Aluminium - Ceramic Coated - Tapped

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Gearboxes Offset

Hide Pictures

Go to Top  


Gearboxes - Offset -  60 x  60

Gearboxes - Offset - 60 x 60

Base mounted. SRBM60 Series.

Die cast aluminium Housing. Steel Shafts. Bearings Input / Output : Ball / Sintered Bronze. Steel and Phenolic Gears. Shaft Play Radial / Thrust : Less than 0.11mm / Less than 0.31mm. Operating Temp : -10 to 60 Deg C | Approx weight : 26 grams.

Click for combined categories: All Offset Gearboxes


Shafting Precision Ground

Hide Pictures

Go to Top  


Rail Supports - With Shaft - One Piece

Rail Supports - With Shaft - One Piece

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings

Frelon Linear Bearings


Gearheads Inline

Hide Pictures

Go to Top  


Gearheads - Inline - Planetary - Size  17 - Precision

Gearheads - Inline - Planetary - Size 17 - Precision

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 Deg C (-65 to 250 Deg F).

Click for combined categories: All Inline Gearheads

Related Information:
Gear Types



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 155215 products in 3613 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.