All Items: Angle - Categories


Matching Part Numbers

Hide Pictures

Go to Top  


WRANGLED

Part number WRANGLED.

Description: Name: Steel Puzzle. Type: Chinese conundrums to separate and re-join. Age: 6 Puzzles available in the shop..
Group: Games - Puzzles - Single Player

Stock: 27


Angle

Hide Pictures

Go to Top  


Angle - Brass

Angle - Brass


Dental Handpiece Parts

Hide Pictures

Go to Top  


Contra Angle Handpiece Dynadent Parts

Contra Angle Handpiece Dynadent Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Contra Angle Handpiece New W.H. Parts

Contra Angle Handpiece New W.H. Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Contra Angle Handpiece Old W.H. Parts

Contra Angle Handpiece Old W.H. Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Gearboxes Right Angle

Hide Pictures

Go to Top  


Gearboxes - Right Angle - Model RA 0300-0300-0180 - 30.0 x  30.0 x 18.0mm

Gearboxes - Right Angle - Model RA 0300-0300-0180 - 30.0 x 30.0 x 18.0mm

Economy Bevel Gear Type. Miniature gearbox.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x  30.5 x 18.7mm

Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x 30.5 x 18.7mm

Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.

1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2o. Approx Max Temperature 80 oC. Suitable for manual and short term drive application.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0365-0365-0294 - 36.5 x  36.5 x 29.4mm

Gearboxes - Right Angle - Model RA 0365-0365-0294 - 36.5 x 36.5 x 29.4mm

1:1 ratio. GDRA Series. Miniature gearbox.


Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0400-0400-0200 - 40.0 x  40.0 x 20.0mm

Gearboxes - Right Angle - Model RA 0400-0400-0200 - 40.0 x 40.0 x 20.0mm

Mitre Gears 1:1 ratio. GDRA Series. Miniature gearbox.

Max Speed 3000 RPM. Max Backlash 1o. Ball bearings both ends. Base mounting both sides.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x  40.0 x 25.0mm

Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x 40.0 x 25.0mm

BLH20 Series. Miniature gearbox.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle Model RA 0400-0400-0250(B) - 40.0 x  40.0 x 25.0mm (B)

Gearboxes - Right Angle Model RA 0400-0400-0250(B) - 40.0 x 40.0 x 25.0mm (B)

Economy Bevel Gear Type. GDRA Series. Miniature gearbox.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0445-0445-0254 - 44.45 x  44.45 x 25.4mm

Gearboxes - Right Angle - Model RA 0445-0445-0254 - 44.45 x 44.45 x 25.4mm

BGA24-1 (1 to 1 Ratio)

Anodised Aluminium Housing. 303 Stainless Shafts. Minus 20 to Plus 80 oC Temperature Range. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease EP2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0500-0500-0300 - 50.0 x  50.0 x 30.0mm

Gearboxes - Right Angle - Model RA 0500-0500-0300 - 50.0 x 50.0 x 30.0mm

Economy Bevel Gear Type. GDRA Series.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x  55.0 x 34.0mm

Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x 55.0 x 34.0mm

BLH30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0600-0600-0300 - 60.0 x  60.0 x 30.0mm

Gearboxes - Right Angle - Model RA 0600-0600-0300 - 60.0 x 60.0 x 30.0mm

Mitre Gears 1:1 ratio. GDRA Series.

Max Speed 3000 RPM. Max Backlash 1o. Ball bearings both ends. Base mounting both sides.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0625-0508-0300 - 62.5 x  50.8 x 30.0mm

Gearboxes - Right Angle - Model RA 0625-0508-0300 - 62.5 x 50.8 x 30.0mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0630-0630-0400 - 63.0 x  63.0 x 40.0mm

Gearboxes - Right Angle - Model RA 0630-0630-0400 - 63.0 x 63.0 x 40.0mm

Economy Bevel Gear Type. GDRABE Series.

Speeds up to 500 rpm. Bearings : Special resin and bronze with steel backing. Shafts : 303 Stainless Steel. Cover : Black plastic over black anodised aluminium housing. Gears : AISI 1045 steel.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0635-0635-0381 - 63.5 x  63.5 x 38.1mm

Gearboxes - Right Angle - Model RA 0635-0635-0381 - 63.5 x 63.5 x 38.1mm

BGA31-1 (1 to 1 Ratio)

Anodised Aluminium Housing. 303 Stainless Shafts. Minus 20 to Plus 80 oC Temperature Range. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease EP2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

Gearboxes - Right Angle - Model RA 0665-0508-0508 - 66.55 x 50.8 x 50.8mm

1 to 1 ratio with rated speeds up to 1800rpm. Sealed gearcase. Key drive shafts. Keys included.

4140 Heat Treated steel gears and shafts. Aluminium alloy hard anodised case. Maximum operating temperature 90 oC (200 Deg F). Optional foot mount plates available - also listed in this category.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x  44.0 x  44.0mm

Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x 44.0 x 44.0mm

Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x  75.0 x 44.0mm

Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm

BLH40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0800-0800-0400 - 80.0 x  80.0 x 40.0mm

Gearboxes - Right Angle - Model RA 0800-0800-0400 - 80.0 x 80.0 x 40.0mm

Mitre Gears 1:1 ratio. GDRA Series.

Max Speed 3000 RPM. Max Backlash 1o. Ball bearings both ends. Base mounting both sides.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0820-0620-0400 - 82.0 x  62.0 x 40.0mm

Gearboxes - Right Angle - Model RA 0820-0620-0400 - 82.0 x 62.0 x 40.0mm

GDRHD Series.

Max Rated Speed 3600 RPM - Reversible / Unit weight 0.4kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 oC.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0855-0778-0318 - 85.5 x  77.8 x  31.8mm

Gearboxes - Right Angle - Model RA 0855-0778-0318 - 85.5 x 77.8 x 31.8mm

Bevel Gears - Plastic Housing. GDLBP Series.

Max Backlash 5o.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0870-0660-0600 - 87.0 x  66.0 x 60.0mm

Gearboxes - Right Angle - Model RA 0870-0660-0600 - 87.0 x 66.0 x 60.0mm

1 : 1 ratio only. BL18 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV. Weight: 1.3kg.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x  60.0 x  60.0mm

Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x 60.0 x 60.0mm

Bevel Gears - 5 Nm-15 Nm ratios 6:1 to 24:1. BLN30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm

Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm

BLH50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm

Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm

BLH60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x  80.0 x  80.0mm

Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x 80.0 x 80.0mm

Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1400-1070-0660 -140.0 x 107.0 x 66.0mm

Gearboxes - Right Angle - Model RA 1400-1070-0660 -140.0 x 107.0 x 66.0mm

GDRHD Series.

Max Rated Speed 3600 RPM - Reversible / Unit Weight 1.8kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 oC.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm

Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm

BLH70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1660-1280-0760 -166.0 x 128.0 x 76.0mm

Gearboxes - Right Angle - Model RA 1660-1280-0760 -166.0 x 128.0 x 76.0mm

GDRHD Series.

Max Rated Speed 3600 RPM - Reversible / Unit Weight 3.1kg. Aluminium Die Cast Housing. Alloy Steel Shafts. Spiral Bevel Gears, Case Hardened alloy steel. Torque ratings table (after listings) shows ratings for X axis = 2 and Y axis = 1. Temp Range minus 10 to Plus 40 oC.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm

Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm

Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm

Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm

Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm

Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm

Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Click for combined categories: All Right Angle Gearboxes


Gearheads Right Angle

Hide Pictures

Go to Top  


Gearheads - Right Angle - Planetary - Size  56 - Precision

Gearheads - Right Angle - Planetary - Size 56 - Precision

Use with NEMA Size 56 Motors.

Maximum input speed 5000 rpm. Shaft loading 937 kg (2100 lbs) radial and 937 kg (2100 lbs) axial. Min. Efficiency ---- Single Stage : 85%, Double Stage : 80%. Max Backlash ---- Single Stage : 10 arc min, Double Stage : 14 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Click for combined categories: All Right Angle Gearheads

Related Information:
Gear Types


Tensioners

Hide Pictures

Go to Top  


Tensioner - Fixed Angle

Tensioner - Fixed Angle

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Click for combined categories: All Tensioner Arms


Dental Handpiece Parts

Hide Pictures

Go to Top  


Intra 25CH Contra Angle Kavo Parts

Intra 25CH Contra Angle Kavo Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

E4R Slow Speed - Contra Angle Green Band NSK Parts

E4R Slow Speed - Contra Angle Green Band NSK Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

Ball Joints

Hide Pictures

Go to Top  


Joints - Ball and Socket - Right Angle - Heavy Duty

Joints - Ball and Socket - Right Angle - Heavy Duty

Bearing Design: Steel/Steel. Ball, neck and taper hardened.

Angular movement 25o.

Click for combined categories: All Ball Joints


Joints - Ball and Socket - Right Angle - Light Duty

Joints - Ball and Socket - Right Angle - Light Duty

Light duty ball joints provide a pivot point. They are unhardened and should not be used for high load or high repetition applications. Clearance is not specified, so actual joints may range from very loose to reasonably tight.

Steel Type: Zinc Passivated Induction Hardened. Stainless Steel Type: 303 Grade unhardened. Max. Static push/pull loads are valid for both radial and axial loads. Standard Steel type Ball Stud Tensile strength: Rm = 600 N/mm sq (Not applicable to stainless type). Standard Steel type Housing Tensile strength: Rm = 500 N/mm sq (Not applicable to stainless type).

Click for combined categories: All Ball Joints


Joints - Ball Positioner

Joints - Ball Positioner

For holding parts at an angle

Pivots 45 Deg from horizontal in every direction. Tightens at any position by rotating the collar. Has a tapped hole at the top and a male thread at the bottom for securing.

Click for combined categories: All Ball Joints


Hinges

Hide Pictures

Go to Top  


Hinges - Flexi-Hinge - Precision

Hinges - Flexi-Hinge - Precision

Double and Single Ended - Limited Angle Rotary Applications.

Zero Backlash. Constant Spring Rate. No lubrication required. Self centering on removal of load. -53 to +176 Deg. Celsius operating temperature.

Click for combined categories: All Hinges


Motor Drives Stepper

Hide Pictures

Go to Top  


Motors - Stepper - Drive Modules

Motors - Stepper - Drive Modules

1.8 Deg Step Angle. Complete with 6.35mm Shaft Coupling.

Click for combined categories: All Stepper Motors


Suspension Units

Hide Pictures

Go to Top  


Suspension Units - Rubber - Rectangular - Bolt On

Suspension Units - Rubber - Rectangular - Bolt On

Housing (up to DOA45): Light Alloy (DOA50): spheroidal graphite cast iron. Rubber: Black, hardness 70 Shore A. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30oC / Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Suspension Units - Rubber - Rectangular - Insert Type

Suspension Units - Rubber - Rectangular - Insert Type

Housing (up to DOS45): Light Alloy (DOS50): spheroidal graphite cast iron. Rubber: Black, hardness 70 Shore A. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30oC / Operating Temperature Range: -40oC to +80oC.

Click for combined categories: All Suspension Units


Springs Torsion

Hide Pictures

Go to Top  


Springs - Torsion - Left Hand Wound

Springs - Torsion - Left Hand Wound

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.

Click for combined categories: All Torsion Springs


Springs - Torsion - Right Hand Wound

Springs - Torsion - Right Hand Wound

Free Deflection denotes the angle of the legs in the unloaded starting position

Load should be applied at about half the leg length.

Click for combined categories: All Torsion Springs


Gears Metric Bevel

Hide Pictures

Go to Top  


Gears - Bevel - Module 0.5

Gears - Bevel - Module 0.5

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 0.5 Mitre Gears


Gears - Bevel - Module 0.8

Gears - Bevel - Module 0.8

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 0.8 Mitre Gears


Gears - Bevel - Module 1

Gears - Bevel - Module 1

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 1 Mitre Gears


Gears - Bevel - Module 1.5

Gears - Bevel - Module 1.5

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 1.5 Mitre Gears


Gears - Bevel - Module 2

Gears - Bevel - Module 2

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 2 Mitre Gears


Gears - Bevel - Module 2.5

Gears - Bevel - Module 2.5

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 2.5 Mitre Gears


Gears - Bevel - Module 3

Gears - Bevel - Module 3

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Metric Bevel Gears

Related Information:
Module 3 Mitre Gears


Gears Metric Racks

Hide Pictures

Go to Top  


Gears - Racks - Module 0.3

Gears - Racks - Module 0.3

20o Pressure Angle. Brass.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 0.4

Gears - Racks - Module 0.4

20o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 0.5

Gears - Racks - Module 0.5

20o Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 0.75

Gears - Racks - Module 0.75

20o Pressure Angle. Brass and stainless steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 0.8

Gears - Racks - Module 0.8

20o Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 1

Gears - Racks - Module 1

20o Pressure Angle. Brass, carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 1.25

Gears - Racks - Module 1.25

20o Pressure Angle. Acetal.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 1.5

Gears - Racks - Module 1.5

20o Pressure Angle. Carbon steel, stainless steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 2

Gears - Racks - Module 2

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 2.5

Gears - Racks - Module 2.5

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Gears - Racks - Module 3

Gears - Racks - Module 3

20o Pressure Angle. Carbon steel, acetal and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Metric Gear Racks


Universal Joints

Hide Pictures

Go to Top  


Universal Joints - Short Series - Step Down - 303 Stainless Steel

Universal Joints - Short Series - Step Down - 303 Stainless Steel

Maximum angle of 30 Degrees


Click for combined categories: All Universal Joints


Gears Imperial Bevel

Hide Pictures

Go to Top  


Gears - Bevel - 24 Diametrical Pitch

Gears - Bevel - 24 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
24 DP Mitre Gears


Gears - Bevel - 32 Diametrical Pitch

Gears - Bevel - 32 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
32 DP Mitre Gears


Gears - Bevel - 48 Diametrical Pitch

Gears - Bevel - 48 Diametrical Pitch

For 90o angle power transfer.

20o Pressure Angle. Do not mix gears from different sets. See Gears - Mitre for 1:1 ratios. For easy ready selected sets of 90o gears please see the HES website.

Click for combined categories: All Imperial Bevel Gears

Related Information:
48 DP Mitre Gears


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks -  1/10 Pitch

Gears - Racks - 1/10 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks - 120 Diametrical Pitch

Gears - Racks - 120 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  1/20 Pitch

Gears - Racks - 1/20 Pitch

20o Pressure Angle. 416 Stainless Steel.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  64 Diametrical Pitch

Gears - Racks - 64 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  72 Diametrical Pitch

Gears - Racks - 72 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  80 Diametrical Pitch

Gears - Racks - 80 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  96 Diametrical Pitch

Gears - Racks - 96 Diametrical Pitch

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gear Racks Circular Pitch

Hide Pictures

Go to Top  


Gears - Racks - Circular Pitch 2

Gears - Racks - Circular Pitch 2

20o Pressure Angle. Hardened steel.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks - Circular Pitch 5

Gears - Racks - Circular Pitch 5

20o Pressure Angle. Hardened steel.

For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears Metric Spiral Bevel

Hide Pictures

Go to Top  


Gears - Bevel - Spiral - Module 2

Gears - Bevel - Spiral - Module 2

For 90o angle power transfer.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Click for combined categories: All Metric Bevel Gears

Click for combined categories: All Metric Spiral Bevel Gears

Related Information:
Module 2 Straight Cut Bevel Gears

Module 2 Spiral Mitre Gears


Gears - Bevel - Spiral - Module 2.5

Gears - Bevel - Spiral - Module 2.5

For 90o angle power transfer.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Click for combined categories: All Metric Bevel Gears

Click for combined categories: All Metric Spiral Bevel Gears

Related Information:
Module 2.5 Straight Cut Bevel Gears

Module 2.5 Spiral Mitre Gears


Gears - Bevel - Spiral - Module 3

Gears - Bevel - Spiral - Module 3

For 90o angle power transfer.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Click for combined categories: All Metric Bevel Gears

Click for combined categories: All Metric Spiral Bevel Gears

Related Information:
Module 3 Straight Cut Bevel Gears

Module 3 Spiral Mitre Gears


Gears - Bevel - Spiral - Module 4

Gears - Bevel - Spiral - Module 4

For 90o angle power transfer.

See Gears - Mitre for 1:1 ratios. ISO Class 6. 35o Spiral Angle / 20o Pressure Angle. AISI 1045 Steel, Tooth surfaces induction hardened to HRC48.53. Black oxide finish except bore and tooth surfaces.

Click for combined categories: All Metric Bevel Gears

Click for combined categories: All Metric Spiral Bevel Gears


Gearbox Output Shafts

Hide Pictures

Go to Top  


Gearboxes - Output Shafts - For E Type Helical Reducers

Gearboxes - Output Shafts - For E Type Helical Reducers

For use in Right Angle gearboxes with bores. E Series.

Stainless 303 shaft. Steel keys and circlips. E-X and E-DX types suitable for E type gearboxes (right angle types).

Click for combined categories: All Shafts


Gears Imperial Racks

Hide Pictures

Go to Top  


Gears - Racks - 10 Diametrical Pitch - 14.5 Degree

Gears - Racks - 10 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  12 Diametrical Pitch - 14.5 Degree

Gears - Racks - 12 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  16 Diametrical Pitch - 14.5 Degree

Gears - Racks - 16 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Nylon.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks - 20 Diametrical Pitch - 14.5 Degree

Gears - Racks - 20 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  24 Diametrical Pitch - 14.5 Degree

Gears - Racks - 24 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  24 Diametrical Pitch - 20 Degree

Gears - Racks - 24 Diametrical Pitch - 20 Degree

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  32 Diametrical Pitch - 14.5 Degree

Gears - Racks - 32 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  32 Diametrical Pitch - 20 Degree

Gears - Racks - 32 Diametrical Pitch - 20 Degree

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  48 Diametrical Pitch - 14.5 Degree

Gears - Racks - 48 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Brass, carbon steel and nylon.

Plastic and metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  48 Diametrical Pitch - 20 Degree

Gears - Racks - 48 Diametrical Pitch - 20 Degree

20o Pressure Angle. 416 stainless steel and aluminium.

Metallic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  6 Diametrical Pitch - 14.5 Degree

Gears - Racks - 6 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks


Gears - Racks -  8 Diametrical Pitch - 14.5 Degree

Gears - Racks - 8 Diametrical Pitch - 14.5 Degree

14.5o Pressure Angle. Unhardened Steel.

Plastic. For easy ready selected sets of rack and gear please see the HES website.

Click for combined categories: All Imperial Gear Racks



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154991 products in 3674 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We ship by traceable courier only (no standard post) and we have excellent Freight Rates within Australia and worldwide.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.