All Items: Aluminium Shafting - Categories


Shafting Aluminium

Hide Pictures

Go to Top  


Shafting - Aluminium

Shafting - Aluminium

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting - Pipe - Aluminium

Shafting - Pipe - Aluminium

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

Click for combined categories: All Pipe Shaft

Click for combined categories: All Metal Tube


Shafting - Aluminium - Ceramic Coated

Shafting - Aluminium - Ceramic Coated

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting - Aluminium - Ceramic Coated - Tapped

Shafting - Aluminium - Ceramic Coated - Tapped

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting - Supported - Pre-Drilled - Aluminium

Shafting - Supported - Pre-Drilled - Aluminium

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

Click for combined categories: All Shafting

Click for combined categories: All Aluminium Shafting


Shafting Precision Ground

Hide Pictures

Go to Top  


Supports - Block

Supports - Block

For linear shafting.

Material: Aluminium.

Click for combined categories: All Supports


Supports - Pedestal Two Bolt

Supports - Pedestal Two Bolt

For linear shafting.

Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Supports - Flanged Four Bolt

Supports - Flanged Four Bolt

For linear shafting.

Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Supports - Flanged Two Bolt

Supports - Flanged Two Bolt

For linear shafting.

Housing made of Cast Aluminium. Clamping Screw (supplied) made of Steel.

Click for combined categories: All Supports


Rail Supports - With Shaft - One Piece

Rail Supports - With Shaft - One Piece

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings

Frelon Linear Bearings


Rail Supports - Without Shaft

Rail Supports - Without Shaft

For mounting of linear shafting.

Shafting sold separately. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearing in Housing

Linear Bearings


Rail Supports - With Shaft

Rail Supports - With Shaft

Includes linear shafting.

Includes shaft to h6 tolerances. Support is made from aluminium.

Click for combined categories: All Shaft Supports

Related Information:
Linear Bearings


Housings - Linear with Bearings

Hide Pictures

Go to Top  


Housings - Linear - Pillow Block - Closed - Adjustable

Housings - Linear - Pillow Block - Closed - Adjustable

Includes Bearings. Adjustable preload.

Housing: Aluminium - carbon steel and engineered polymer bearing fitted. Super Smart Ball BushingTM Bearing fitted. Designed for use with Hard Linear Shafting (h6 Tolerance).

Click for combined categories: All Linear Bearing Housings

Click for combined categories: All Linear Bearing Housings With Bearing


Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Aluminium

Rod - Round - Aluminium

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Rod


Tube and Tubing

Hide Pictures

Go to Top  


Tube - Round - Aluminium

Tube - Round - Aluminium

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube

Related Information:
Aluminium Properties


Tube - Round - Soft Metal Packs

Tube - Round - Soft Metal Packs

For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.

Click for combined categories: All Metal Tube


Engineering and Hobby Rod

Hide Pictures

Go to Top  


Rod - Round - Soft Metal Packs

Rod - Round - Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.

Click for combined categories: All Metal Rod


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Aluminium and Plastic - Open

Bearings - Linear - Aluminium and Plastic - Open

Metric style does not come with oring grooves.

Operating Temperature -14o to 90o Celius. Anodized Aluminium Body with Polymer J Bearing material. Features include - Self-lubricating, Open, anodized aluminum adapter for support shafts, Maintenance free, Secure bearing with set screws (not included).

Enclosures

Hide Pictures

Go to Top  


Enclosures - Aluminium - Economy

Enclosures - Aluminium - Economy

Great little boxes ready for you to adapt to your mechanical projects.

Excellent screening properties for EMI and RFI. Ideal for projects subject to weather. Great housings for mechanical projects. Easy to machine. 380 Die Cast aluminium alloy BS1490 LM24. Close fitting flanged lids.

Click for combined categories: All Enclosures


Knobs Pointer

Hide Pictures

Go to Top  


Knobs - Pointer - Aluminium and Plastic

Knobs - Pointer - Aluminium and Plastic

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass Insert. White Pointer.


Click for combined categories: All Pointer Knobs


Bar

Hide Pictures

Go to Top  


Rectangular Bar - Aluminium

Rectangular Bar - Aluminium

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.

Click for combined categories: All Rectangular Bar


Bushes Bronze

Hide Pictures

Go to Top  


Bushes - Aluminium Bronze - Flanged

Bushes - Aluminium Bronze - Flanged

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Click for combined categories: All Bronze Bushes

Click for combined categories: All Flanged Bronze Bushes


Bushes - Aluminium Bronze - Graphite Plug - Flanged

Bushes - Aluminium Bronze - Graphite Plug - Flanged

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Click for combined categories: All Bronze Bushes

Click for combined categories: All Flanged Bronze Bushes


Bushes - Aluminium Bronze - Graphite Plug - Unflanged

Bushes - Aluminium Bronze - Graphite Plug - Unflanged

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Click for combined categories: All Bronze Bushes

Click for combined categories: All Unflanged Bronze Bushes


Bushes - Aluminium Bronze - Unflanged

Bushes - Aluminium Bronze - Unflanged

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Click for combined categories: All Bronze Bushes

Click for combined categories: All Unflanged Bronze Bushes


Enclosures

Hide Pictures

Go to Top  


Enclosures - Aluminium - 100 Series

Enclosures - Aluminium - 100 Series

Great little boxes ready for you to adapt to your mechanical or electrical projects.

Internal guide slots for mounting PCB assemblies vertically. Ideal for housing sensitive electrical, mechanical, pneumatic or hydraulic devices. Provides effective shielding of EMI and RFI. Designed to IP65 of IEC529 and NEMA 4 (dust and hoseproof). The lid incorporates a recessed neoprene gasket.

Click for combined categories: All Enclosures


Bearings Linear

Hide Pictures

Go to Top  


Bushes - Aluminium - Frelon Lined - Flanged

Bushes - Aluminium - Frelon Lined - Flanged

Self lubricating - Replaces oilite or plastic bearings.

SLIP FIT: Housing bore should be nominal OD +0.050/+0.075 - lock in place with retaining compound or epoxy. PRESS FIT: Housing bore should be nominal OD -0.000/+0.012. Use freezing method for press fit assembly - freeze bearing to -18 oC for 30 minutes. Body: Aluminium. Lining: Frelon.

Click for combined categories: All Aluminium Bushes


Bushes - Aluminium - Frelon Lined - Unflanged

Bushes - Aluminium - Frelon Lined - Unflanged

Self lubricating - Replaces oilite or plastic bearings.

SLIP FIT: Housing bore should be nominal OD +0.050/+0.075 - lock in place with retaining compound or epoxy. PRESS FIT: Housing bore should be nominal OD -0.000/+0.012. Use freezing method for press fit assembly - freeze bearing to -18 oC for 30 minutes. Body: Aluminium. Lining: Frelon.

Click for combined categories: All Aluminium Bushes


Sheet

Hide Pictures

Go to Top  


Sheet - Aluminium

Sheet - Aluminium

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.

Click for combined categories: All Sheet


Knobs Pointer

Hide Pictures

Go to Top  


Knobs - Pointer - Black Aluminium

Knobs - Pointer - Black Aluminium

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft.


Click for combined categories: All Pointer Knobs


Knobs - Pointer - Brushed Aluminium

Knobs - Pointer - Brushed Aluminium

Push on. Suits 6.35mm (1/4 inch) shaft.


Click for combined categories: All Pointer Knobs


Screws Thumb

Hide Pictures

Go to Top  


Screws - Thumb - Knurled  - Aluminium

Screws - Thumb - Knurled - Aluminium

Aluminum knurled head thumb screws


Click for combined categories: All Thumb Screws


Snaps

Hide Pictures

Go to Top  


Snaps - Swivel Eye - Aluminium

Snaps - Swivel Eye - Aluminium

Rust proof nickel plated made from finest quality zinc aluminium alloy


Click for combined categories: All Snaps


Nuts

Hide Pictures

Go to Top  


Nuts - Hexagonal - Aluminium

Nuts - Hexagonal - Aluminium

METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Nuts


Couplings Other

Hide Pictures

Go to Top  


Couplings - Double Disk - Aluminium

Couplings - Double Disk - Aluminium

Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:
Shafting


Rollers

Hide Pictures

Go to Top  


Rollers - Feed - With Aluminium Sleeve

Rollers - Feed - With Aluminium Sleeve

Tolerance of Roller Outside Diameter (D) is +/-0.075 mm

Urethane 60 Durometer ground outside diameter. Aluminium sleeve. Feed rollers do not have a rotating bore. They are designed to turn with the shaft.

Click for combined categories: All Rollers


Washers Flat Metallic

Hide Pictures

Go to Top  


Washers - Flat - Aluminium

Washers - Flat - Aluminium

Flat washers.

Click for combined categories: All Flat Washers and Spacers - Metallic


Bearings Linear

Hide Pictures

Go to Top  


Bearings - Linear - Aluminium and Plastic - Closed

Bearings - Linear - Aluminium and Plastic - Closed

Metric style does not come with oring grooves.

Operating Temperature -14o to 90o Celius. Anodized Aluminium Body with Polymer J Bearing material. Features include - Self-lubricating, Corrosion and dirt resistant, Maintenance free, Vibration dampening.

Tube and Tubing

Hide Pictures

Go to Top  


Tube - Square - Aluminium

Tube - Square - Aluminium

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Click for combined categories: All Metal Tube


Tube - Streamline - Aluminium

Tube - Streamline - Aluminium

Streamline Aluminium Tubing.

Teardrop shaped soft aluminium tubing. Enables easier bending. Great for tight applications.

Click for combined categories: All Metal Tube


Airmovers

Hide Pictures

Go to Top  


Airmovers - Adjustable - Aluminium

Airmovers - Adjustable - Aluminium

Airmovers amplify air flow from a small supply of compressed air. Terrific for fume or smoke extraction or to move large volumes of light weight materials.


Click for combined categories: All Adjustable Airmovers

Related Information:
See all Airmovers Categories


Spacers

Hide Pictures

Go to Top  


Spacers - Round - Through Bore - Aluminium

Spacers - Round - Through Bore - Aluminium

Shaft spacers - Aluminium


Click for combined categories: All Round Spacers

Click for combined categories: All Flat Washers and Spacers - Metallic


Thread Inserts

Hide Pictures

Go to Top  


Inserts - Self Tapping - For Aluminium - Stainless 303

Inserts - Self Tapping - For Aluminium - Stainless 303

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Click for combined categories: All Self Tapping Inserts


Inserts - Self Tapping - For Aluminium - Steel

Inserts - Self Tapping - For Aluminium - Steel

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Click for combined categories: All Self Tapping Inserts


Screws Pan Head

Hide Pictures

Go to Top  


Screws - Pan Head - Aluminium

Screws - Pan Head - Aluminium

UNC metal thread machine screws

Nuts sold separately - See Fasteners - Nuts.

Click for combined categories: All Machine Screws


Shim

Hide Pictures

Go to Top  


Shim and Foil - Aluminium

Shim and Foil - Aluminium

Includes listing on 6061-T6 Aluminium Sheet. Very thin to thick sizes.

NOTE! Very thin sizes may experience some bending or indentations. This product is meant for engineering applications not decorative applications. Coloured shim is anodised. The colour is not removable. The colour is for identification purposes only.

Click for combined categories: All Shim


Screws Button Head

Hide Pictures

Go to Top  


Screws - Button - Socket - Aluminium

Screws - Button - Socket - Aluminium

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.

Click for combined categories: All Socket Button Screws

Related Information:
Hex Keys

Allen Key Screwdrivers


Screws Cap Head

Hide Pictures

Go to Top  


Screws - Cap - Socket - Aluminium

Screws - Cap - Socket - Aluminium

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN912.

Click for combined categories: All Socket Cap Screws

Related Information:
Hex Keys

Allen Key Screwdrivers


Screws Countersunk

Hide Pictures

Go to Top  


Screws - Countersunk - Socket - Aluminium

Screws - Countersunk - Socket - Aluminium

Flat Head Countersunk UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991.

Click for combined categories: All Countersunk Screws

Related Information:
Hex Keys

Allen Key Screwdrivers


Spacers

Hide Pictures

Go to Top  


Spacers - Hex - Threaded - Aluminium

Spacers - Hex - Threaded - Aluminium

Threaded Hex Spacers. Also known as coupling nuts.


Click for combined categories: All Hex Spacers


Threaded Rod

Hide Pictures

Go to Top  


Threaded Rod - Allthread - Aluminium

Threaded Rod - Allthread - Aluminium

UNC and UNF light weight aluminium.


Click for combined categories: All Threaded Rod


Couplings Other

Hide Pictures

Go to Top  


Couplings - Double Disk - Aluminium - High Response

Couplings - Double Disk - Aluminium - High Response

0.6 to 25 Nm. 11000 to 42000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.

Couplings - Single Disk - Aluminium

Couplings - Single Disk - Aluminium

0.7 to 19 Nm. 2400 to 10000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.

Related Information:
Shafting


Couplings - Single Disk - Aluminium - High Response

Couplings - Single Disk - Aluminium - High Response

0.6 to 25 Nm. 11000 to 42000 rpm.

High response. High torque. Zero backlash. High torsional stiffness.

Related Information:
Shafting


Cases

Hide Pictures

Go to Top  


Cases - Equipment

Cases - Equipment

Aluminium cases for your hobby equipment.

These items may attract increased freight rates due to their size. We will contact you before charging your order if necessary.

Rotary

Hide Pictures

Go to Top  


Tools - Rotary Files - Aluminium Cut

Tools - Rotary Files - Aluminium Cut

Used for deburring and smoothing metals.

Made from Heat treated steel.

Click for combined categories: All Tools


Screws Thumb

Hide Pictures

Go to Top  


Screws - Thumb - Knurled - Washer Face - Aluminium

Screws - Thumb - Knurled - Washer Face - Aluminium

Knurled head aluminum thumb screws with an integral washer


Click for combined categories: All Thumb Screws


Knobs Ball

Hide Pictures

Go to Top  


Knobs - Ball - Threaded - Polished Aluminium

Knobs - Ball - Threaded - Polished Aluminium

DIN319 Tapped aluminium

Polished with a flash chrome finish.

Click for combined categories: All Ball Knobs

Click for combined categories: All Knobs


Nuts Lock

Hide Pictures

Go to Top  


Nuts - Hexagonal - Nylon Insert - Aluminium

Nuts - Hexagonal - Nylon Insert - Aluminium

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Click for combined categories: All Lock Nuts


Pins - Pull

Hide Pictures

Go to Top  


Pins - Pull - Round Handle - Aluminium and Steel

Pins - Pull - Round Handle - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Tee Handle - Aluminium and Steel

Pins - Pull - Tee Handle - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Click for combined categories: All Roll Pins


Pins - Pull - Threaded End - Aluminium and Steel

Pins - Pull - Threaded End - Aluminium and Steel

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.

Click for combined categories: All Roll Pins


Blow Guns

Hide Pictures

Go to Top  


Blow Guns - Trigger Action - Aluminium

Blow Guns - Trigger Action - Aluminium

Adjustable gap. AG32LC: Painted black, not polished - Ball valve operated not trigger - No Gauze.

Couplings Bellows

Hide Pictures

Go to Top  


Couplings - Bellows - Integral Clamp - Aluminium

Couplings - Bellows - Integral Clamp - Aluminium

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Phosphor Bronze Bellows. Aluminium Hubs.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Couplings - Bellows - Set Screw - Aluminium

Couplings - Bellows - Set Screw - Aluminium

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Phosphor Bronze Bellows. Aluminium Hubs.

Click for combined categories: All Bellows Couplings

Related Information:
Shafting


Collars

Hide Pictures

Go to Top  


Collars - Shaft - Clamp Type - One Piece - Aluminium

Collars - Shaft - Clamp Type - One Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All One Piece Clamp Type Shaft Collars


Collars - Shaft - Clamp Type - Two Piece - Aluminium

Collars - Shaft - Clamp Type - Two Piece - Aluminium


Click for combined categories: All Shaft Collars

Click for combined categories: All Two Piece Clamp Type Shaft Collars


Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium

Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium

Use with Utilitrak PW Crowned Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.


Handles

Hide Pictures

Go to Top  


Handles - Clean Line - Tubular

Handles - Clean Line - Tubular

Aluminium tube with epoxy base coating, highly resistant to wear, scratches and chemical agents, in white similar to RAL 9002. Avoid continuous contact with boiling water or steam. Tube end caps in technopolymer, white colour similar to RAL 9002 with matte finish. Zinc-plated steel special screws and brass nuts.

Click for combined categories: All Handles


Sensors

Hide Pictures

Go to Top  


Miniature Photo Sensor Flange

Miniature Photo Sensor Flange

Aluminium (A2011). Supporting part for stepping motor enabling detection of point of origin. Lightweight and minimum moment of inertia.

Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Cross Roller Tables - Aluminium

Linear Slides - Cross Roller Tables - Aluminium

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Prtecision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

Click for combined categories: All Crossed Roller Slide Tables


Couplings Helical and Slit

Hide Pictures

Go to Top  


Couplings - Spiral Beam - 6 Beam - Aluminium - Clamp Type

Couplings - Spiral Beam - 6 Beam - Aluminium - Clamp Type

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings - Spiral Beam - 6 Beam - Aluminium - Set Screw Type

Couplings - Spiral Beam - 6 Beam - Aluminium - Set Screw Type

Pilot Bore size not toleranced. Finished Bore sizes to +0.03/0.00.

Click for combined categories: All Helical and Slit Couplings

Related Information:
Shafting


Couplings Rigid

Hide Pictures

Go to Top  


Couplings - Rigid - 1 Piece Clamp - Aluminium

Couplings - Rigid - 1 Piece Clamp - Aluminium


Timing Belts and Pulleys 1.0mm

Hide Pictures

Go to Top  


Pulleys - Timing -  1.000mm Pitch - 3mm Wide - Aluminium

Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Aluminium

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 1mm Timing Pulleys


Pulleys - Timing -  1.000mm Pitch - 6mm Wide - Aluminium

Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Aluminium

Timing Pulleys to suit 1mm Pitch Timing Belts.

Aluminium Alloy. For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 1mm Timing Pulleys


Pulleys - Timing -  1.000mm Pitch - STOCK - Aluminium

Pulleys - Timing - 1.000mm Pitch - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 1mm Timing Pulleys

Related Information:
Flanges to suit 1.00mm Pitch Pulleys


Timing Belts and Pulleys 12.7mm

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit H Series - Aluminium

Flanges - Timing Pulley - Suit H Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges

Related Information:
Carbon Steel Timing Pulley Stock


Timing Belts and Pulleys 9.525mm L (3/8in)

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit L Series - Aluminium

Flanges - Timing Pulley - Suit L Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges

Related Information:
Carbon Steel Timing Pulley Stock


Linear Slides

Hide Pictures

Go to Top  


Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium

Linear Slides - Utilitrak - PW - Dual Vee - Channel - Aluminium

Use with Utilitrak PW Dual Vee Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.


Handles

Hide Pictures

Go to Top  


Handles - Steel

Handles - Steel

Brass, Stainless Steel, Aluminium.


Click for combined categories: All Handles


Timing Belts and Pulleys 1.0mm

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit 1mm Series - Aluminium

Flanges - Timing Pulley - Suit 1mm Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges


Timing Belts and Pulleys 1.5mm

Hide Pictures

Go to Top  


Pulleys - Timing -  1.500mm Pitch - GT - 3mm Wide - Aluminium

Pulleys - Timing - 1.500mm Pitch - GT - 3mm Wide - Aluminium

Timing Pulleys to suit 1.5mm Pitch GT Timing Belts.

Aluminium Alloy. For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 1.5mm Timing Pulleys


Timing Belts and Pulleys 10mm

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit T10 Series - Aluminium

Flanges - Timing Pulley - Suit T10 Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges

Related Information:
Carbon Steel Timing Pulley Stock


Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium

Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Click for combined categories: All 10mm Timing Pulleys

Related Information:
Aluminium Flanges to suit AT10 series pulley stock

Steel Flanges to suit AT10 series pulley stock


Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Click for combined categories: All 10mm Timing Pulleys

Related Information:
Aluminium Flanges to suit T10 series pulley stock

Steel Flanges to suit T10 series pulley stock


Timing Belts and Pulleys 12.7mm

Hide Pictures

Go to Top  


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Click for combined categories: All H 12.7mm Timing Pulleys

Related Information:
Flanges to suit H series pulley stock


Timing Belts and Pulleys 2.032mm MXL

Hide Pictures

Go to Top  


Pulleys - Timing -  2.032mm Pitch - MXL - STOCK - Aluminium

Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Click for combined categories: All MXL 2.032mm Timing Pulleys

Related Information:
Flanges to suit MXL series pulley stock


Timing Belts and Pulleys 2.073mm 40DP

Hide Pictures

Go to Top  


Pulleys - Timing -  2.073mm Pitch - 40DP - STOCK - Aluminium

Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.

For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 40DP 2.073mm Timing Pulleys

Related Information:
Flanges to suit 40 DP series pulley stock


Timing Belts and Pulleys 2.0mm

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit GT2 Series - Aluminium

Flanges - Timing Pulley - Suit GT2 Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges

Related Information:
304 Stainless Steel Timing Pulley Stock


Pulleys - Timing -  2.000mm Pitch - GT - 4mm Wide - Aluminium

Pulleys - Timing - 2.000mm Pitch - GT - 4mm Wide - Aluminium

Timing Pulleys to suit 2mm Pitch GT Timing Belts 4mm Wide.

Aluminium Alloy. For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 2mm Timing Pulleys


Pulleys - Timing -  2.000mm Pitch - GT - 9mm Wide - Aluminium

Pulleys - Timing - 2.000mm Pitch - GT - 9mm Wide - Aluminium

Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.

Aluminium Alloy. For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 2mm Timing Pulleys


Pulleys - Timing -  2.000mm Pitch - GT - STOCK - Aluminium

Pulleys - Timing - 2.000mm Pitch - GT - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 2mm Timing Pulleys

Related Information:
Flanges to suit GT 2mm series pulley stock


Timing Belts and Pulleys 2.5mm

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit T2.5 Series - Aluminium

Flanges - Timing Pulley - Suit T2.5 Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges


Pulleys - Timing -  2.500mm Pitch - T2.5 - STOCK - Aluminium

Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 2.5mm Timing Pulleys

Related Information:
Flanges to suit T2.5 series pulley stock


Timing Belts and Pulleys 3.0mm

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit GT3 Series - Aluminium

Flanges - Timing Pulley - Suit GT3 Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges

Related Information:
Carbon Steel Timing Pulley Stock


Flanges - Timing Pulley - Suit HTD3 Series - Aluminium

Flanges - Timing Pulley - Suit HTD3 Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges


Pulleys - Timing -  3.000mm Pitch - GT - STOCK - Aluminium

Pulleys - Timing - 3.000mm Pitch - GT - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

For easy ready selected sets of timing belts and pulleys please see the HES website.

Click for combined categories: All 3mm Timing Pulleys

Click for combined categories: All 3mm HTD Pulley Stock

Related Information:
Flanges to suit GT 3mm series pulley stock


Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Click for combined categories: All 3mm Timing Pulleys

Click for combined categories: All 3mm HTD Pulley Stock

Related Information:
Flanges to suit HTD 3mm series pulley stock


Timing Belts and Pulleys 5.08mm XL (1/5in)

Hide Pictures

Go to Top  


Flanges - Timing Pulley - Suit XL Series - Aluminium

Flanges - Timing Pulley - Suit XL Series - Aluminium

Use with timing pulley stock to custom make your own pulleys


Click for combined categories: All Timing Pulley Flanges

Related Information:
Carbon Steel Timing Pulley Stock



Select all items starting with...
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9



Store - Categories Pages

Go to Top





Store Pages

Go to Top





Main Pages on Small Parts and Bearings Website




Go to Top

Site Summary

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts and Bearings offers 154795 products in 3682 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer's risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts and Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts and Bearings 1997. All rights reserved.