011157 Brighton Best
- from Small Parts and Bearings
Category Matches
Housings with Integral Bearing
TopHide PicturesHousings - Bearing - Tapped Base Unit - Stainless

Search Rating: 100%
Full stainless steel bearing units are the best solution for hostile chemical washdown applications. All metal bearing insert components are a combination of 302, 304 and 440 stainless steel. Seals are silicone rubber. Grease is H-1 food grade.
Operating temperature minus 20 oC to +120 deg C. Solid 304 stainless housings have a machined base and extremely smooth surface finish, essential for demanding washdown installations. These housings do not experience flaking, cracking or discolouration and are virtually unaffected by scrapes. Bearings are removable. Food grade.
Magnets Ceramic
TopHide PicturesMagnets - Ceramic Blocks

Search Rating: 95%
Also see combined categories:
All Magnets
All Ceramic Magnets
Low cost, light weight, high energy material
Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.
Magnets - Ceramic Cylinder

Search Rating: 95%
Also see combined categories:
All Magnets
All Ceramic Magnets
Low cost, light weight, high energy material
Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.
Knobs Oval
TopHide PicturesKnobs - Oval Tapered - Press On - Phenolic

Search Rating: 92%
Also see combined categories:
All Knobs
Press on knobs hold on securely without threads or set screws
Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside.
Magnets Ceramic
TopHide PicturesMagnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit

Search Rating: 88%
Also see combined categories:
All Magnets
All Ceramic Magnets
Extended poles can be lightly machined. Press fit. Insulated aluminium casing.
Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.
Washers Flat Metallic
TopHide PicturesWashers - Flat - Carbon Spring Steel - Precision Shim

Search Rating: 85%
Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic
Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.
C1010 steel types best suited to arbor shimming.
Knobs Ball
TopHide PicturesKnobs - Ball - Knock On - Phenolic

Search Rating: 83%
Moulded from black phenolic resin.
Light Weight. Thermal insulating. Non corrosive. POK Type have a ribbed insert. Shaft should be 0 to 0.007 mm undersized for best results. 712 Type suit standard metric rod.
Magnets Ceramic
TopHide PicturesMagnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Search Rating: 82%
Also see combined categories:
All Magnets
All Ceramic Magnets
Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.
Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.
Clips
TopHide PicturesRings - Crescent

Search Rating: 81%
Variation of an E-Clip with an open face. Also known as a C-Clip.
Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.
Seals and Sealing
TopHide PicturesSeals - Door Edge Protection Material

Search Rating: 57%
Heavy duty edge protection with gripper metal insert. Made from black PVC. Heat resistant to 100 Deg C. Steel spring core.
Easily presses on and forms around 90o corners. No gluing necessary. EPDM is recommended for water and dust applications. NBR is recommended for exposure to oils and solvents. Compress 3.2 to 4.8mm for best sealing,. Spring steel core. Black only.
Clutches
TopHide PicturesClutches - Slip - Inline

Search Rating: 26%
Also see combined categories:
All Slip Clutches
Multiplate Design.
Fully adjustable within rating limits. Low stick / slip ratio. Continuous slip within dissipation limit. Zinc plated steel housing with brass plates. Proprietary non-asbestos friction material.
Other Store Pages
Click Page Banner Below
TopMain Pages
Click Page Banner Below
Top



Clearance

Contact




Freight


Hobby




Payments

Privacy

Products



Technical

Terms
Top